Database Info

[Completed] Totally baked phoned need resurrection !

HI EVERY BODY
this is quite challenging , given the various tread on unbricking
this phone MMX Canvas 4 A210, in process of imei solution ( which could not be installed via engineering mode) and in process of changing rom, flashed mistakenly by formating bootloader in sp tool ( phone no longer recognized by PC or go into recovery, on pressing power ...no action))
checked all treads on xda but none say about this situation???, is totally baked ( hard bricked or what?? )
ANY EXPERTS SOLUTION or people in the same situation, if then how did you get out of this????
i have costum rom downloaded, sp tool , scatter txt. ......ready?

Hi,
Edit:
I see you've found the right place to ask for help already.
Good luck!

how to??
hi guys
i read many threads on xda beyond this phone MMX A210 canvas 4 / blue one, (correct me if i am wrong)... this is the bootloader problem, so i need to download and istall the bootloader fist
question 1) is the bootloader in in rom itself??? because i have downloaded mine
2) how do i go about it ( install boot loader)
3) there is thread using resistor of 100k method is it working??
awaiting your reply

Please use your thread in General Q&A that you've opened.
Xda Assist is for helping members navigate the site, not for support.
Thanks!

[Completed] Xolo q1010i stuck in logo

My xolo q1010i phone flashed with kk stock romantic 4.4.2_soo2 after that I have rooted my phone with kingo root after that I unknowingly select the OTA update after the update my phone when rebooting phone got stuck with logo I am unable to switch off the phone but it was going to recovery mode. Then I try to flash with stock rom same 4.4.2_S002 from my sdcard but installation aborted by message saying wrong partition error still like that and also I try to install by adb sideload it will not install the romantic.
Kindly someone give me clear suggestions to rectify thanking you.

Kumarbhav said:
My xolo q1010i phone flashed with kk stock romantic 4.4.2_soo2 after that I have rooted my phone with kingo root after that I unknowingly select the OTA update after the update my phone when rebooting phone got stuck with logo I am unable to switch off the phone but it was going to recovery mode. Then I try to flash with stock rom same 4.4.2_S002 from my sdcard but installation aborted by message saying wrong partition error still like that and also I try to install by adb sideload it will not install the romantic.
Kindly someone give me clear suggestions to rectify thanking you.
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
Sorry to hear about your trouble. but there is an XDA area dedicated to the Xolo Q1000 at http://forum.xda-developers.com/xolo-q1000 which would be a good starting place. I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/xolo-q1000/help where the experts familiar with your device might be best able to guide you. If the information from the Q1000 Forum is not appilcable to you, you may have to try in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck!
EDIT: Member has now posted in the suggested area. Thread closed.

[Completed] Canvas hd a116 rom flashing- brom error:5069(s_dl_pmt_err_no_space)

I have a micromax canvas hd a116 which was working fine from past three years.
But two days before when i was attending a call it suddenly stopped and everything stopped working displaying "Unfortunately Stopped" error and it powered off.
And when i switched it on it freezed on boot logo. Every attempt to restart gave the same result. I decided to take it to MICROMAX CARE. They said it might be a software issue and it will be charged Rs700 for reflashing software. They also said that 90% chances are that it will be recovered but 10% chances are that it woud bring no effect.
I thought giving it try.
But as those 10% chances were there was no effect one of the staff told me that the fashing process gave an error in between.
After that I thought to give it a try my self.
I used SP FLASH TOOLS for the process.
But it gave a BROM ERROR:5069 (after the red and purple bar).
I have also tried flashing each file one by one but ony the PRELOADER was flashed successfuly and rest all files gave same error.
Please Help me with the flashing process.
P.S.- I don't know much about tech and flashing stuff so i might need a detailed instruction for every step. Though i have flashed a custom rom two years ago but i did that from recovery mode and not using SP FLASH TOOLS.

Hello and thank you for using XDA Assist,
please ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there will be able to help you.
Kind regards and good luck
Trafalgar Square
XDA Assist

[Completed] Infocus m810 stuck in fastboot

Dear all,
Need urgent help as my infocus m810 rooted, is not responding at all I actually tried to install customer recovery via flashify app and I flashed some .IMG file with it .when I rebooted it in recovery mode it says recovery.img tempered and after that it has gone to fastboot shows in left corner.i have tried every possible key combination.used adb but it is actually not recognise the device same happed with so tool as well.now I have downloaded SUT from xda but this also shows error flashing files. I have tried removing the battery nothing happened I'm stuck about what to do .kindly suggest it's like a dead device nothing is happening apart from this fastboot mode plzz help asap it has been 3 days no resolution yet??

Gopesh Solanki said:
Dear all,
Need urgent help as my infocus m810 rooted, is not responding at all I actually tried to install customer recovery via flashify app and I flashed some .IMG file with it .when I rebooted it in recovery mode it says recovery.img tempered and after that it has gone to fastboot shows in left corner.i have tried every possible key combination.used adb but it is actually not recognise the device same happed with so tool as well.now I have downloaded SUT from xda but this also shows error flashing files. I have tried removing the battery nothing happened I'm stuck about what to do .kindly suggest it's like a dead device nothing is happening apart from this fastboot mode plzz help asap it has been 3 days no resolution yet??
Click to expand...
Click to collapse
Hi Gopesh
Thank you for using XDA Assist
As we do not have an specific forum dedicated for your device yet, our experts at the below forum should be able to help you. Please be welcome to post over in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.

[Completed] somebody help me.... encryption occured and now phone won't flash anymore..

I need help regarding my Zen ultraphone 502. I had problem encryption unsucessful screen everytime i reebot and I cannot pass through it the phone kept on that screen even the reset button didn't worked.
So I decided to flash my phone with ultraphone 502 official stocked image jelly bean with sp flash tool.
After the tool proceeded i got stuck at error:
BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
Hint is blankl.
The phone is dead. I cannot start the phone but the phone is detected in sp flash tool and windows os. I think it is bricked.
Can do a full format. Can also do memory check... But am not able to flash a single file.. Now my phone is dead it won't boot up..
So any help ASAP would be appreciated.
Plzz plzzz i need ur help..
Thanks!!
There is no problem with the rom ... Am using stock rom and had flashed it so many times before...
Any way to solve this problem..

Hello and thank you for using XDA Assist,
please ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist