After installation cwm in my karbonn titanium octane plus i tried hard to reboot it please help me to rooboot it. Even i cant open the recovery mode after this.when i try to reflash the cwm it gives error DRAM failed
Hi,
I hope you flashed a CWM made for your exact device make and model number.... Flashing anything not made for your exact device make and model number can lead to serious trouble sometimes.
Here is a root thread for your device which mentions CWM, you can try asking for help from here,
http://forum.xda-developers.com/general/help/root-karbonn-titanium-octane-plus-t2816066
Otherwise you need to ask for help in the same section we showed you in your last Assist thread.
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Related
Hey guys i need help i have bricked my phone. I tried installing CWM recovery and it ends up that i cant boot into recovery. then i was goofing around with an app that has the option "delete china" :silly:, i don't remember the app's name, i thought that option was to delete the unnecessary apps but when i tried to reboot i saw a white screen after the Blu logo appeared. :crying:can you help me to fix my phone? i need serious help. Please help me out!!!!!!!!!!!!!!
Contact: [email protected] / [email protected]
Hi,
A factory reset from CWM could help, if you can get into it. Otherwise you probably need the stock firmware for your device and instructions on how to flash it. You could contact the manufacturer....and you could ask for help here also,
>Android Development and Hacking >Android Q&A, Help & Troubleshooting
Good luck!
Bricked PAP5300DUO
tHE PHONE IS VIBRATING. i CAN ENTER IN RECOVERY MODE.. The PC make a sound but the fastboot,Odin & other programs cant see my phone. i INSTALLED ALL KIND OF DRIVERS BUT .... i USED PIMP MY ROM BUT I MADE A MISTAKE TO USE OTHER SIMILAR APP AFTER THAT AND AFTER REBOOT DIED. I WIPE THE CHECHE & TRIED FACTORY RESET BUT AT THE END FAILS AND SAYS ...DATA/APP IS MISSING. i TRIED RESTORE TITANIUM BACKUP FILE BUT DOESNT HELPED. PLEASE HELP !!!
I USED THE SUGGESTED METHOD BUT IT SAYS <WAITING FOR DEVICE>
THE LAST I MADE BACKUP/RECOVERY WITH MY OLD BACKUP BUT STILL NOTHING. I KNOW NOW I MUST DO SOMETHING FROM PC BUT DRIVERS ARE PROBLEM.
PLEASE try to help me. Im new to all this ****.
Hi there,
I'm sorry but I can't find anything related to your question.
Please post that in the forum bellow for more answers from the experts but first register an account on XDA forums:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Hello there,
I'm new here but I really need help with my phone, I broke the recovery by flashing the wrong version of the recovery, and I did the big mistake of rebooting before flashing a good version on top of it.
Now I can't access either fastboot or recovery, and the flash_image program that can be used by adb does not work and tells me that there was an error searching partitions...
I can boot in the installed rom just fine, so if adb is needed I can use it, but I don't have anything else than that. The phone is a Huawei G510-0100 (u8951)
I don't know what to do anymore...
EDIT: after using the application ROM Installer from here: http://forum.xda-developers.com/showthread.php?t=2480034 I was able to get a usable recovery but with corrupted screen and in that recovery I flashed the right version so everything is back to order.
Hi,
This is all I could find.... There's really no feedback on the thread, so flash anything at your own risk as always...
> General discussion > Upgrading, Modifying and Unlocking > reverting your huawei g510-200 back to factory stock
If you need help, you can try asking in that thread.... Otherwise for this or any other questions, you will need to ask here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
My xolo q1010i phone flashed with kk stock romantic 4.4.2_soo2 after that I have rooted my phone with kingo root after that I unknowingly select the OTA update after the update my phone when rebooting phone got stuck with logo I am unable to switch off the phone but it was going to recovery mode. Then I try to flash with stock rom same 4.4.2_S002 from my sdcard but installation aborted by message saying wrong partition error still like that and also I try to install by adb sideload it will not install the romantic.
Kindly someone give me clear suggestions to rectify thanking you.
Kumarbhav said:
My xolo q1010i phone flashed with kk stock romantic 4.4.2_soo2 after that I have rooted my phone with kingo root after that I unknowingly select the OTA update after the update my phone when rebooting phone got stuck with logo I am unable to switch off the phone but it was going to recovery mode. Then I try to flash with stock rom same 4.4.2_S002 from my sdcard but installation aborted by message saying wrong partition error still like that and also I try to install by adb sideload it will not install the romantic.
Kindly someone give me clear suggestions to rectify thanking you.
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
Sorry to hear about your trouble. but there is an XDA area dedicated to the Xolo Q1000 at http://forum.xda-developers.com/xolo-q1000 which would be a good starting place. I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/xolo-q1000/help where the experts familiar with your device might be best able to guide you. If the information from the Q1000 Forum is not appilcable to you, you may have to try in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck!
EDIT: Member has now posted in the suggested area. Thread closed.
Hi everybody;
I'm having big problems with a Lenovo S6000L tablet which became a brick for a while and came to (half) life again because I can get into recovery or fastboot but it won't turn on again further than that after a factory reset. I used SP Flash Tool with (stock, I suppose) rom "S6000_A442_001_025_131017_ww_wifi" which takes me to a "Please button to set the Country Code" again and again to select the Country option but afterwards it will show a time "Timeout Failed".
Before it went wrong I had made a backup of the previous rom using Clockworkmod and the problem is that, after the factory reset, I have lost that CWM recovery and can´t install CWM back again from the rom backup which was ok because SP Flash Tool doesn't seem to install it. Installing CWM would solve my problem but I am scared about flashing the wrong files and get a brick again. Of course , part of the problem is that I can't use MTK Droid Tools to install CWM because apparently Debugging is off and MTK DT doesn't recognize the tablet when connected, which SP Flash Tool does.
So could anybody, please, give a hand to make this half-brick work again?
Thank you.
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck