Hey guys i need help i have bricked my phone. I tried installing CWM recovery and it ends up that i cant boot into recovery. then i was goofing around with an app that has the option "delete china" :silly:, i don't remember the app's name, i thought that option was to delete the unnecessary apps but when i tried to reboot i saw a white screen after the Blu logo appeared. :crying:can you help me to fix my phone? i need serious help. Please help me out!!!!!!!!!!!!!!
Contact: [email protected] / [email protected]
Hi,
A factory reset from CWM could help, if you can get into it. Otherwise you probably need the stock firmware for your device and instructions on how to flash it. You could contact the manufacturer....and you could ask for help here also,
>Android Development and Hacking >Android Q&A, Help & Troubleshooting
Good luck!
Related
Hello Developers,
I did mess with my android phone Mercury mTab MagiQ & need your kind attention and help here.
What I did first is:
1. rooted my phone with Root Genius;
2. thereafter, I copied the GApps to /system/app;
3. then I unrooted the device with root genius
4. then I did the factory setup &
5. finally, I tried rebooting my phone
huh... its not allowing me to rebooting again as all the time, few messages popping up that are not allowing me to go off the Welcome screen. Messages that are coming time & again are:
1. Unfortunately, Google Account Manager has stopped.
2. Unfortunately, the process.com.google.process.gapps has stopped.
I tried doing the factory setup by pressing Vol+ Start+ Home button & rebooted but the same problem.
Don't know what to do... kindly suggest the way out.
Hello there,
Since we do not have forum for your specific device, can you please post in
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
And the right experts may be help you with the correct answers.
PS: BTW, i am pretty sure you must flash stock ROM but its just a guess.
Here another thread about: Stock ROM for Mercury Mtab MagiQ 5 inch Phablet. Please Help!
Good luck
Hi, i bricked my phone.... I tried many solutions, but nothing worked!
I think i corupted the build.prop file... I have no backup. When i boot my phone: The screen is black for 3 seconds. After, i see the samsung boot logo, and then the boot animation. And after i see the animation but the boot sound cut at 2/3. And my phone show back the samsung boot logo forever.
Adb to reset the build.prop file: Permissions issue
One click: Not work
Android system recovery: the wipe data do nothing
Fastboot: I think i did'nt have that
Cyanogen ROM: Not compatible
If you need more specs, i will tell you!:good:
(I am french so that why my english is ugly)
Hi,
Unfortunately there's no device section for your device, so asking for help here is your best bet...
>Android Development and Hacking >Android Q&A, Help & Troubleshooting
Good luck!
Thank you. Thread closed.
After installation cwm in my karbonn titanium octane plus i tried hard to reboot it please help me to rooboot it. Even i cant open the recovery mode after this.when i try to reflash the cwm it gives error DRAM failed
Hi,
I hope you flashed a CWM made for your exact device make and model number.... Flashing anything not made for your exact device make and model number can lead to serious trouble sometimes.
Here is a root thread for your device which mentions CWM, you can try asking for help from here,
http://forum.xda-developers.com/general/help/root-karbonn-titanium-octane-plus-t2816066
Otherwise you need to ask for help in the same section we showed you in your last Assist thread.
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Hi everybody
I explain my problem. i have an alcatel 4015d pop c1 which boot loop.
i can access to the recovery mode but the reset factory doesnn't. I've also tried to use mobile upgrade but i have the message : impossible to read terminal informations.
all this happen because i made a mistake. i was trying to format sd card but i accidentally formated sometthing else (i don't really know what).:crying:
Please help me repair my phone. Thank you
Hi,
You likely need to flash your stock firmware again. I can't find anything relevant on XDA for your device though. You will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Or try a google search, or contacting the manufacturer about firmware and flashing instructions.
Good luck!
Hello there,
I'm new here but I really need help with my phone, I broke the recovery by flashing the wrong version of the recovery, and I did the big mistake of rebooting before flashing a good version on top of it.
Now I can't access either fastboot or recovery, and the flash_image program that can be used by adb does not work and tells me that there was an error searching partitions...
I can boot in the installed rom just fine, so if adb is needed I can use it, but I don't have anything else than that. The phone is a Huawei G510-0100 (u8951)
I don't know what to do anymore...
EDIT: after using the application ROM Installer from here: http://forum.xda-developers.com/showthread.php?t=2480034 I was able to get a usable recovery but with corrupted screen and in that recovery I flashed the right version so everything is back to order.
Hi,
This is all I could find.... There's really no feedback on the thread, so flash anything at your own risk as always...
> General discussion > Upgrading, Modifying and Unlocking > reverting your huawei g510-200 back to factory stock
If you need help, you can try asking in that thread.... Otherwise for this or any other questions, you will need to ask here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck