[Completed] [Q] Stuck in bootloop on my Leagoo Lead 1 - XDA Assist

Hi , so i buy leagoo lead 1 from Etotalk they send me phone and everything was ok , but after 2 weeks i got OTA update which i download and click on apply , phone restart and start again instaling new update (i was like ok everything is good )but at middle of this update it give me Error Android icon with red color ,
and after that i can just start phone again and see just boot menu with :
Normal Boot
Update via ADC
Update from sdcart
update from cashe
wipe cashe
wipe data (factory reset)
....(this one last i dont rememeber)
I tried wipe all and restart again but that did not help me much ..
ok so i download SP-flashtool from Leagoo web site instal all driver for usb and download Original rom from theyr site too .
what i did is i start program like admin. then i click on Option->be sure that Usb mode is enable then again Option -> DA Download All-> and enable Hight speed , after that i click on Scatter -loading and from the folder with Rom i sellect "MT6582_Android_scatter.txt"click on Firmware ->Upgrade and plug my phone which is turn off . in program i can see that he fount it but after 2 hour it is still at 0% how u can see on image i attach to this with some txt record from program with errors
So could anybody tell me what should i do now ?

Hi,
I can't find anything relevant on XDA for your device. You will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!

Darth said:
Hi,
I can't find anything relevant on XDA for your device. You will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Click to expand...
Click to collapse
ok thx

Related

[Completed] Mercury mTab MagiQ not been able to boot

Hello Developers,
I did mess with my android phone Mercury mTab MagiQ & need your kind attention and help here.
What I did first is:
1. rooted my phone with Root Genius;
2. thereafter, I copied the GApps to /system/app;
3. then I unrooted the device with root genius
4. then I did the factory setup &
5. finally, I tried rebooting my phone
huh... its not allowing me to rebooting again as all the time, few messages popping up that are not allowing me to go off the Welcome screen. Messages that are coming time & again are:
1. Unfortunately, Google Account Manager has stopped.
2. Unfortunately, the process.com.google.process.gapps has stopped.
I tried doing the factory setup by pressing Vol+ Start+ Home button & rebooted but the same problem.
Don't know what to do... kindly suggest the way out.
Hello there,
Since we do not have forum for your specific device, can you please post in
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
And the right experts may be help you with the correct answers.
PS: BTW, i am pretty sure you must flash stock ROM but its just a guess.
Here another thread about: Stock ROM for Mercury Mtab MagiQ 5 inch Phablet. Please Help!
Good luck

[Completed] [Q] Help me to repair my my android tablets penta ws1001q

hello, i am having a problem with my tablet name : penta ws1001q
the problem is that it stuck at the manufacturer i can only access the recovery mode.
I made a factory data reset and format cache but this has not solved my problem.
So i have have downloaded its driver on the manufacturer website and i have download drivers(it include sp flash tool, an the tabs image) for my tablets the problem is that i don't know how to use them.
I am asking you if you can give me a clear explanation on how to install this driver to my tablet and also how to use sp flash tool and get my tab in the download mode. I have already try using adb command but it did not work the tab just boot and stuck at manufacturer logo.
Please help me.
Hi,
I can't find anything relevant on XDA related to your device so please ask for more help here :
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!

[Completed] [Q] Boot Menu.

Hey guys venky here.I have got a lenovo s850.It has android version kit-kat.I have rooted it and for some days it was running well then i downloaded "ROM toolbox" from play store.I installed it and there was option to change resolution.I put it to "1080" and it rebooted my phone after rebooting it all the icons in it are Very huge and it also shows that "Lenovo launcher is not respoding","Lenovo Widgets are not responding" etc.,and if i try to factory reset it It shows "Have been in Meta mode,Long press power button and normal boot...Please help i want to reset or have any solutions pleae help me :crying::crying:
Hi,
Most devices stock dpi is in the 250 to 400 range or so.... You've gone way beyond a dpi that is functional. So yes... Much would be wrong.
If a factory reset didn't fix it, you likely need to flash your stock firmware again to fix this.
I can't find anything relevant on XDA to help you with that, so you will need to ask for help here ,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Thanks...Is there no other way to factory reset?
On your device I don't know. Usually you do it from the custom recovery. If it's not changing you dpi... You need to ask for further help in the section I linked. ?
Ok can you atleast tell me why is it showing "Have Been in meta mode,Long press the power button and the normal boot".It happens when i press the volume down key,home button and the power button.
You've asked where I suggested... You can only be patient now.
Good luc!
Anyways Thanks alot for your time
Thank you. Thread closed.

[Completed] Help 111 i brick my prestigio 5300.cant install drivers

Bricked PAP5300DUO
tHE PHONE IS VIBRATING. i CAN ENTER IN RECOVERY MODE.. The PC make a sound but the fastboot,Odin & other programs cant see my phone. i INSTALLED ALL KIND OF DRIVERS BUT .... i USED PIMP MY ROM BUT I MADE A MISTAKE TO USE OTHER SIMILAR APP AFTER THAT AND AFTER REBOOT DIED. I WIPE THE CHECHE & TRIED FACTORY RESET BUT AT THE END FAILS AND SAYS ...DATA/APP IS MISSING. i TRIED RESTORE TITANIUM BACKUP FILE BUT DOESNT HELPED. PLEASE HELP !!!
I USED THE SUGGESTED METHOD BUT IT SAYS <WAITING FOR DEVICE>
THE LAST I MADE BACKUP/RECOVERY WITH MY OLD BACKUP BUT STILL NOTHING. I KNOW NOW I MUST DO SOMETHING FROM PC BUT DRIVERS ARE PROBLEM.
PLEASE try to help me. Im new to all this ****.
Hi there,
I'm sorry but I can't find anything related to your question.
Please post that in the forum bellow for more answers from the experts but first register an account on XDA forums:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

[Completed] Brick LG G2 and can enter in recovery mode

I update the version of cyanogen by direct cell .. until then that's fine did wipes , installed the new version , wipes again .. so the phone hang up and not called again .. when you turn on it appears LG screen for 1 second and off again .. I turned on the player to the PC and not have any folder and also not can enter the device's recovery ... any solution for this?
XDA Visitor said:
I update the version of cyanogen by direct cell .. until then that's fine did wipes , installed the new version , wipes again .. so the phone hang up and not called again .. when you turn on it appears LG screen for 1 second and off again .. I turned on the player to the PC and not have any folder and also not can enter the device's recovery ... any solution for this?
Click to expand...
Click to collapse
Hello, and welcome to XDA!
Can you get to Download Mode? That is (should be) hold down Volume-Down while inserting the MicroUSB cable (while the other end is already plugged into the PC)?
If this is not already you, it's worth to check out:
> LG G2 > G2 Q&A, Help & Troubleshooting > Can't boot into recovery mode
If you have any questions, can post in that thread (once you have an XDA account, if you don't have one already).
Hope this helps, and good luck!
OfficerJimLahey said:
Hello, and welcome to XDA!
Can you get to Download Mode? That is (should be) hold down Volume-Down while inserting the MicroUSB cable (while the other end is already plugged into the PC)?
If this is not already you, it's worth to check out:
> LG G2 > G2 Q&A, Help & Troubleshooting > Can't boot into recovery mode
If you have any questions, can post in that thread (once you have an XDA account, if you don't have one already).
Hope this helps, and good luck!
Click to expand...
Click to collapse
Also check out this thread here. Like the Officer said if you can get into download mode you can flash back to stock. Make sure to follow the instructions on this thread completely. I have retired my G2 but this got me out of a pickle. Goodluck

Categories

Resources