I update the version of cyanogen by direct cell .. until then that's fine did wipes , installed the new version , wipes again .. so the phone hang up and not called again .. when you turn on it appears LG screen for 1 second and off again .. I turned on the player to the PC and not have any folder and also not can enter the device's recovery ... any solution for this?
XDA Visitor said:
I update the version of cyanogen by direct cell .. until then that's fine did wipes , installed the new version , wipes again .. so the phone hang up and not called again .. when you turn on it appears LG screen for 1 second and off again .. I turned on the player to the PC and not have any folder and also not can enter the device's recovery ... any solution for this?
Click to expand...
Click to collapse
Hello, and welcome to XDA!
Can you get to Download Mode? That is (should be) hold down Volume-Down while inserting the MicroUSB cable (while the other end is already plugged into the PC)?
If this is not already you, it's worth to check out:
> LG G2 > G2 Q&A, Help & Troubleshooting > Can't boot into recovery mode
If you have any questions, can post in that thread (once you have an XDA account, if you don't have one already).
Hope this helps, and good luck!
OfficerJimLahey said:
Hello, and welcome to XDA!
Can you get to Download Mode? That is (should be) hold down Volume-Down while inserting the MicroUSB cable (while the other end is already plugged into the PC)?
If this is not already you, it's worth to check out:
> LG G2 > G2 Q&A, Help & Troubleshooting > Can't boot into recovery mode
If you have any questions, can post in that thread (once you have an XDA account, if you don't have one already).
Hope this helps, and good luck!
Click to expand...
Click to collapse
Also check out this thread here. Like the Officer said if you can get into download mode you can flash back to stock. Make sure to follow the instructions on this thread completely. I have retired my G2 but this got me out of a pickle. Goodluck
Related
Hi all, I will comment that I bought the LG MS323 MetroPCS L70 ... All was well until one day I thought of RAM 512 were too few to me.
I took the phone and used SWAPPER 2 to create a virtual memory of 256 MB in the Micro SD, was configured correctly and worked fine.
I used my phone normally after 30 minutes to make the changes SWAPPER 2 and at the end of my working day connected my phone to copy some files from my PC to the Micro SD. After I turned it off normal and decided to turn it back on going to the cell not normally starts with the logo of LG, I did not give importance and tried to start the normal mode of LG L70 recovery which never started, then tried to flash it with the STOCK ROM LG L70 .... But by no means let me do it, not because it starts in DOWNLOAD mode ... I'm worried because if I connect my phone to the computer only open two folder called "image" and "VERINFO" (see image called "001.jpg").
In the folder called "image" there are several files (see image called "image.jpg") and folder called "VERINFO" I get a TXT file that opening just says "M8610AAAAANLYD1034202.2" (see image called "verinfo.jpg")
You have more knowledge of this problem that I have.
Can you help me to fix the "brick" and enter to the DOWNLOAD mode and FLASH my phone normally and install the factory ROM.
Thanks in advance.
Greetings from Honduras
Please post in Android Q&A, Help & Troubleshooting so that the right experts may be of help.
Thanks !!!
Perseus71 said:
Please post in Android Q&A, Help & Troubleshooting so that the right experts may be of help.
Click to expand...
Click to collapse
Thanks For Reply ... I´ll Post In This Forum ...
Thread Closed. Thank you.
My device is C6903 (14.4.a.0.108) bought from the Philippines. It's already rooted and has an unlocked bootloader.
The problem is when I installed this kernel http://forum.xda-developers.com/showthread.php?t=2699803 it now wouldn't boot it just shows the Sony logo and after 2 minutes or so it just blacked out. but when i tap the screen on a dark room the screen shows the black background without the sony logo and after a moment it darkened again like its in lock screen (Its really hard to describe).
I flashed it using fastboot. with this command
/ fastboot flash boot boot.img / and after I input this command
/ fastboot reboot /.
Its still charging and it shows the battery icon when charging on an off state. It can still be recognized by fastboot when i connected it to the computer.
Ive already hard reset it using the button on the sim card slot and the other method the power button and the volume up. It didn't really helped. help me guys Im new in this flashing methods. What should I do?
Hi,
Did you read the requirements at the beginning of post number 1? Did you meet those requirements? The best place to ask about this is in the kernel thread you linked in your post. If that doesn't help you, you can ask for help here....
> Sony Xperia Z1 > Xperia Z1 Q&A, Help & Troubleshooting
Any future questions can be asked in the above section also.
Good luck!
Darth said:
Hi,
Did you read the requirements at the beginning of post number 1? Did you meet those requirements? The best place to ask about this is in the kernel thread you linked in your post. If that doesn't help you, you can ask for help here....
> Sony Xperia Z1 > Xperia Z1 Q&A, Help & Troubleshooting
Any future questions can be asked in the above section also.
Good luck!
Click to expand...
Click to collapse
thanks for replying. I have managed to get out of the situation but now I'm facing another one. My phone is now on boot loop. I tried using flashtool but it wouldn't work. While on flashboot doing its job, my phone would just boot up and go again on a boot loop. flashtool log would just say device disconnected.
I think I found a way to do another trick using fastboot but I don't have a custom recovery installed. Is there any way that I can install CWM or any tools like it using only fastboot? I've been looking for it the whole time but I can't find one. I'm new to this thing by the way. Thanks again!
I've found one. http://wiki.cyanogenmod.org/w/Template:Recovery_install_fastboot
Can i flash this Z1-lockeddualrecovery2.7.154-BETA.flashable.zip (if its possible ) instead of the .img that was mentioned on the site. I can't find a recovery.img for my device.
Again, please ask in your device section linked above.
Thanks!
Thank you. Thread closed.
Hi , so i buy leagoo lead 1 from Etotalk they send me phone and everything was ok , but after 2 weeks i got OTA update which i download and click on apply , phone restart and start again instaling new update (i was like ok everything is good )but at middle of this update it give me Error Android icon with red color ,
and after that i can just start phone again and see just boot menu with :
Normal Boot
Update via ADC
Update from sdcart
update from cashe
wipe cashe
wipe data (factory reset)
....(this one last i dont rememeber)
I tried wipe all and restart again but that did not help me much ..
ok so i download SP-flashtool from Leagoo web site instal all driver for usb and download Original rom from theyr site too .
what i did is i start program like admin. then i click on Option->be sure that Usb mode is enable then again Option -> DA Download All-> and enable Hight speed , after that i click on Scatter -loading and from the folder with Rom i sellect "MT6582_Android_scatter.txt"click on Firmware ->Upgrade and plug my phone which is turn off . in program i can see that he fount it but after 2 hour it is still at 0% how u can see on image i attach to this with some txt record from program with errors
So could anybody tell me what should i do now ?
Hi,
I can't find anything relevant on XDA for your device. You will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Darth said:
Hi,
I can't find anything relevant on XDA for your device. You will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Click to expand...
Click to collapse
ok thx
I have charged it to full, tried entering recovery mode, the screen remains black when doing so.... I can't connect it to my computer because the device drivers always fail to install.. I'm clueless into what i can do to fix this problem, if anyone could help me before I decide to go purchase a brand new tablet, that'd be great.
XDA Visitor said:
I have charged it to full, tried entering recovery mode, the screen remains black when doing so.... I can't connect it to my computer because the device drivers always fail to install.. I'm clueless into what i can do to fix this problem, if anyone could help me before I decide to go purchase a brand new tablet, that'd be great.
Click to expand...
Click to collapse
Hello there! Welcome to XDA!
There is no Forum for your device on XDA...
but... First register an XDA account, then try asking here:
Android Q&A, Help & Troubleshooting
or here:
General Q&A
Good Luck!
So ill explain the error like this:
In every android system there are two boot orders (1st is the one where is the operator logo, second is the one where bootanimation.zip gets in place) right?
Well, i tried to unlock my device (ZTE Roamer) using QPST 2.7 build 402 (to backup my wifi settings);
A flasher tool;
And P736TV1.0.0B29 Firmware (Its AT&T)
I did all the steps like said, but my phone didnt boot after 1st boot order (operator logo)
How does the bootloop look like: youtu.be/_Zy4DStAiNY
(Dont worry about the cracked screen, its only the top layer, touch is working)
So if anyone, ANYONE knows how to fix this please help me
Not working:
download mode, not working
Recovery: Not working
Rom: Not working
What works:
Battery charging animation (When connected to charger without pressing any button)
Thats it
afternoon_poop said:
So ill explain the error like this:
In every android system there are two boot orders (1st is the one where is the operator logo, second is the one where bootanimation.zip gets in place) right?
Well, i tried to unlock my device (ZTE Roamer) using QPST 2.7 build 402 (to backup my wifi settings);
A flasher tool;
And P736TV1.0.0B29 Firmware (Its AT&T)
I did all the steps like said, but my phone didnt boot after 1st boot order (operator logo)
How does the bootloop look like: youtu.be/_Zy4DStAiNY
(Dont worry about the cracked screen, its only the top layer, touch is working)
So if anyone, ANYONE knows how to fix this please help me
Not working:
download mode, not working
Recovery: Not working
Rom: Not working
What works:
Battery charging animation (When connected to charger without pressing any button)
Thats it
Click to expand...
Click to collapse
Hi, Thanks for using XDA assist.
Sad to hear that download mode is not working . you may need to go with jig.
There is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get expert's help.
Good luck.
Vivek_Neel said:
Hi, Thanks for using XDA assist.
Sad to hear that download mode is not working . you may need to go with jig.
There is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get expert's help.
Good luck.
Click to expand...
Click to collapse
Thanks for the reply!
But is there a way i can build my own jig, and if i can, how can i find out what types of resistors i need to use?
And i thought that jigs are only for samsung devices