Hi, I've brought my dead gionee back to life but i got some problems with IMEI's and SIM cards, and Finally decided to flash a different ROM with higher micromax version. (From micromax 25 to 52)
Now, my phone does not work and the new operation system is unable to load after powring on the phone which shows a black screen, with LED backlight on the keyboard.
I would have flashed the phone to recover it back but the sp flash tool gives brom error
"BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005) [BROM] Can not pass bootrom start command! Possibly target power up too early"
I did a long research on google but couldn't find a working solution. So, I hope you give me link to an equivalent flashing tool or maybe you can help me solve the brom issue.
Device: gionee pioneer p1
Thank you.
FinnTheHuman. said:
Hi, I've brought my dead gionee back to life but i got some problems with IMEI's and SIM cards, and Finally decided to flash a different ROM with higher micromax version in vain. (From micromax 25 to 52)
Now, my phone does not work and the new operation system is unable to load after powring on the phone which shows a black screen, with LED backlight on the keyboard.
I would have flashed the phone to recover it back but the sp flash tool gives brom error
"BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005) [BROM] Can not pass bootrom start command! Possibly target power up too early"
I did a long research on google but couldn't find a working solution. So, I hope you give me link to an equivalent flashing tool or maybe you can help me solve the brom issue.
Device: gionee pioneer p1
Thank you.
Click to expand...
Click to collapse
Hello, and thank you for using XDA Assist!
Sounds like your EFS got borked a while back. No flashing of ROMs will fix that unfortunately...I would try to get it back as much to stock as possible for warranty/service work.
Since I only see rooting threads about your device, you can ask for advice here:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Ask Any Question][Newbie Friendly]
Hope this helps, and good luck!
OfficerJimLahey said:
Hello, and thank you for using XDA Assist!
Sounds like your EFS got borked a while back. No flashing of ROMs will fix that unfortunately...I would try to get it back as much to stock as possible for warranty/service work.
Since I only see rooting threads about your device, you can ask for advice here:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Ask Any Question][Newbie Friendly]
Hope this helps, and good luck!
Click to expand...
Click to collapse
I didn't back up the EFS stuff at first place, that's why I think it's a permanant issue. In fact, I would have done a full backup after I had rooted the device but, unfortunately, it seemed that NANDroid, CMW and such custom recoveries were not compatible with it.
Thanks anyway. you did a good job
Related
I have a tecno M9 chinese phone. the phone is rooted but then i did a wrong rom flash with sp flash tool and then lost imei. in the process of trying to correct the problem, the phone went dead. black screen, no power up, no charging, NOTHING. But when connected to Sp flash tool it is detected and also device manager detects it. Please HELP
Hi,
Unfortunately flashing anything not made specifically for our exact model of device usually ends in a brick. You're likely going to have to take it to a service center.
But you can ask for other opinions here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
After installation cwm in my karbonn titanium octane plus i tried hard to reboot it please help me to rooboot it. Even i cant open the recovery mode after this.when i try to reflash the cwm it gives error DRAM failed
Hi,
I hope you flashed a CWM made for your exact device make and model number.... Flashing anything not made for your exact device make and model number can lead to serious trouble sometimes.
Here is a root thread for your device which mentions CWM, you can try asking for help from here,
http://forum.xda-developers.com/general/help/root-karbonn-titanium-octane-plus-t2816066
Otherwise you need to ask for help in the same section we showed you in your last Assist thread.
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
I downloaded the Stock ROM for my tablet and now when I am using Rockchip Batch Tool, its not get recognized. But, when I keep pressing and holding the power button, it gets recognized and then, I started the Restore Operation. But, meanwhile I got error "Lower Format Fail" error. I keep getting the same error while using RKAndroid Tool too.
Thanking you for assisting me in advance.
XDA Visitor said:
I downloaded the Stock ROM for my tablet and now when I am using Rockchip Batch Tool, its not get recognized. But, when I keep pressing and holding the power button, it gets recognized and then, I started the Restore Operation. But, meanwhile I got error "Lower Format Fail" error. I keep getting the same error while using RKAndroid Tool too.
Thanking you for assisting me in advance.
Click to expand...
Click to collapse
Hello, and thank you for using XDA Assist!
Please go ahead and create an account. From there, check out (post in) the [Ask Any Question][Newbie Friendly] thread of the > Android Development and Hacking > Android Q&A, Help & Troubleshooting forum. You should find someone with the same device there (I found a few related threads).
Hope this helps, and good luck!
Hi everybody;
I'm having big problems with a Lenovo S6000L tablet which became a brick for a while and came to (half) life again because I can get into recovery or fastboot but it won't turn on again further than that after a factory reset. I used SP Flash Tool with (stock, I suppose) rom "S6000_A442_001_025_131017_ww_wifi" which takes me to a "Please button to set the Country Code" again and again to select the Country option but afterwards it will show a time "Timeout Failed".
Before it went wrong I had made a backup of the previous rom using Clockworkmod and the problem is that, after the factory reset, I have lost that CWM recovery and can´t install CWM back again from the rom backup which was ok because SP Flash Tool doesn't seem to install it. Installing CWM would solve my problem but I am scared about flashing the wrong files and get a brick again. Of course , part of the problem is that I can't use MTK Droid Tools to install CWM because apparently Debugging is off and MTK DT doesn't recognize the tablet when connected, which SP Flash Tool does.
So could anybody, please, give a hand to make this half-brick work again?
Thank you.
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck
Hello,
I'm new to the forum. I decided to register, because here is the biggest base of android knowledge.
I need your help about my phone Landvo L500s. I tried to install custom rom-cyanogenmod 12 on it and eventually I bricked the phone. I have tried all the ways shown in internet tutorials to unbrick phone with factory rom, but I always get this error-BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032); [EMI] Enable DRAM Failed!
I have already installed USB VCOM drivers and my phone is recognised by device manager(Windows 8.1 x64) so that's not the cause.
Also I can't access recovery mode, as phone doesn't start any more.
If you know any solution, Please help me solve the problem.
Hi,
Thanks for using XDA assist.
I couldn't find a thread that could help you unbrick your device.
Please create a XDA account and post in the following forum:
Android Q&A, Help & Troubleshooting
Good Luck! - gsstudios
Already solved it!
I already solved the problem. I found more stable Stock ROM and flashed it...