I have a tecno M9 chinese phone. the phone is rooted but then i did a wrong rom flash with sp flash tool and then lost imei. in the process of trying to correct the problem, the phone went dead. black screen, no power up, no charging, NOTHING. But when connected to Sp flash tool it is detected and also device manager detects it. Please HELP
Hi,
Unfortunately flashing anything not made specifically for our exact model of device usually ends in a brick. You're likely going to have to take it to a service center.
But you can ask for other opinions here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Related
My phone was ok. I installed cwm recovery by mtk dorid tool. But , I wanted to install TWRP recovery by a pc software- during installation a warning message appeared and I clicked ok (something formatted – I did not remember). Then I lost my mobile network signal, null imei and null baseband. Then I install N9500_MTK6589_Miui_Revolution_4.5.23_Cwm via CWM recovery (2 times, but system closed automatically. But, third time after installation phone totally bricked ). Basically phone starts with startup sound, but with crushing screen. I was able to connect mtk dorid tool and it says Model: N9500- null baseband-null imei, then I tried to Install CWM recovery. Then phone totally bricked without starting. I tried everything from google to solve. Then I was able to firmware upgrade – stock rom (Only one time). Now, stock rom is not downloading. I used all sp flash tools. All the times one error appears –Brom Error: S_FT_Enable_DARM_Fail (4032).
Please anyone help me. (My Pc Detect My Phone as preloader usb vcom port, I am using windows 8.1 64 bit, no issue with driver software and sp flash tool. Is it any problem with my Motherboard.)
Hi there,
I'm sorry but I can't find anything related to your question/device because we don't have any forum/thread with development for this device.
Please post that in the forum bellow for more answers from the experts. Register an account on XDA for that.
> General discussion > Questions and Answers or > Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
hello, thank you to all the helpers.
i got a new lg g2 d802 32 gb phone, and of course tried to root and put twrp on it. the root went well but i was unsuccessful at putting the twrp on it.
when i tried going into the twrp it got stuck in fastboot mode. after some research i learned what to do and started flashing the root files.
i didn't realize that there are designated files for every phone (stupid, right?). now my phone wont go into download mode, recovery mode,
or fastboot, and every time i turn it on it goes into the welcome setup of the d800, stays there for a couple of minutes and reboots.
my windows does not recognize it, and running ubuntu on vmware doesn't either.
is there a fix out there or is the phone gone?
please help!!!
Hi,
Often flashing files not made for our exact device make and model number can brick devices, or hopefully just cause issues we can fix. I suggest you ask the experts who own your device for help in this dedicated help thread for your device ,
> LG G2 > G2 Q&A, Help & Troubleshooting > [HELP THREAD][Noob Friendly] LG G2 Ask any question
Good luck!
I think I hard bricked my LG G2 Mini D618. I was going to flash a custom ROM and in the process I think I messed up in setting up the bootloader ( i may have flashed the wrong aboot.img). And now my phone isn't turning on in any way.
I can't enable Download Mode
I can't access Recovery Mode
PC won't recognize the phone (i have installed LG Driver). Just "Removable Disk" and not "Android" in Device Manager.
won't turn on in any way.
Please help me, i don't want to spend money on sending it on LG Shop.
Hi there,
Here is some discussion about that: bricked D618
For other questions please use this forum:
G2 Mini Q&A, Help & Troubleshooting
Good luck
So yeah...as i wrote in the title i ended up bricking my phone...
Today ,my phone, started to act strangely...many reboots and so on...i decided to rewrite the firmware with SP Flash Tool
Nothing bad..till now..
Shutted down the phone..and started sp flash tool...nothing happened...then i realise i don't have the drivers...
I FORGOT TO TURN ON THE SP FLASH TOOL as i was installing some drivers...next a driver needed the phone to be disconnected for a while...the thing is sp flash tool had already started.. was at 20-30%
i disconnected my phone then i could not make him boot...sp doesn't recognise it anymore....but when i plug the phone in the pc i hear that BING BONG sound and the phone led turns on
I must say that it have unremovable battery
thank you
bump
Hi,
I can't find a relevant thread for your device and issue, but you can ask for help here,
Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Ask Any Question][Newbie Friendly]
Good luck!
Hi everybody;
I'm having big problems with a Lenovo S6000L tablet which became a brick for a while and came to (half) life again because I can get into recovery or fastboot but it won't turn on again further than that after a factory reset. I used SP Flash Tool with (stock, I suppose) rom "S6000_A442_001_025_131017_ww_wifi" which takes me to a "Please button to set the Country Code" again and again to select the Country option but afterwards it will show a time "Timeout Failed".
Before it went wrong I had made a backup of the previous rom using Clockworkmod and the problem is that, after the factory reset, I have lost that CWM recovery and can´t install CWM back again from the rom backup which was ok because SP Flash Tool doesn't seem to install it. Installing CWM would solve my problem but I am scared about flashing the wrong files and get a brick again. Of course , part of the problem is that I can't use MTK Droid Tools to install CWM because apparently Debugging is off and MTK DT doesn't recognize the tablet when connected, which SP Flash Tool does.
So could anybody, please, give a hand to make this half-brick work again?
Thank you.
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck