Database Info

[Completed] [Q] Bricked device( i suppose)

Hi All ,
I have a xolo q1010i which was running on few custom roms previously before I managed to get the flash stock rom from (brieftutorials.com/how-to-unbrick-xolo-q1010i-by-installing-stock-rom/[/url])
Now I used the SP flash tool to unbrick it and install the stock rom, it worked fine until i found that the IMEI was lost.
Still i managed to insert imei using uncle tools and everything was fine.
this is where the problem starts:
I got an update OTA for KitKat and once I updated it the phone was stuck in a loop
So i connected sp flash tool and ran the 4.2.2 stock rom, but suddenly half way I got an error messasge and that was the end.
I have a black screen device on which nothing works, no logo , no charging light, no power + volume up, no power+volume up+down etc .
Not even lights,
Windows says an unidentified device detected and SP flash tool does'nt work.
Have no clue what to do , Is this the end ? or do I have to try the USB Jig / send it for Jtag repair ?
All comments & Ideas appreciated.
Thanks in advance
_____________
Hola,
I managed to resurrect my mobile, I tried Jtag to bypass the preloader by researching a lot ( thanks to my all posts china mobile website) then used SP tools to flash the stock rom ( thanks to Kalaishere XDA )
Finally its working on Jellybean.
I will soon update it and also fix the tiny issue with no imei number

Issue resolved, thread closed, thanks.

[Completed] xperia z ultra c6802 hard bricked

I had rooted my xzu with no prblms....had been using it gor a week had even upgraded to lolipop. Then when i tried to flash my device with a custom rom it did not start again. When i press the power button all it does was vibrate. No led indication light blinking no screen nthng just vibrated. I even tried to recover through s1 tool by following some posts on the forum. For that i had to disassemble my xzu to use the test point. But trying to flash it with xzu ftf it gave error ' resource msm 8274 rom error' i then downloaded s1tool frm a different link then it gave me error hardware not detected. What shud i do to start my phone again, is there any other method to start it

razorine said:
I had rooted my xzu with no prblms....had been using it gor a week had even upgraded to lolipop. Then when i tried to flash my device with a custom rom it did not start again. When i press the power button all it does was vibrate. No led indication light blinking no screen nthng just vibrated. I even tried to recover through s1 tool by following some posts on the forum. For that i had to disassemble my xzu to use the test point. But trying to flash it with xzu ftf it gave error ' resource msm 8274 rom error' i then downloaded s1tool frm a different link then it gave me error hardware not detected. What shud i do to start my phone again, is there any other method to start it
Click to expand...
Click to collapse
Hello, thank you for using XDA Assist!
Please post your question here:
http://forum.xda-developers.com/xperia-z-ultra/help
Your device experts are located there.
Good luck!
Thread closed.

[Completed] Micromax a37 nothing appears by pressing any button but it is detected by computer.

I am using micromax a37 bolt and it has only 107MB internal so I rooted it and used Link2sd app for putting every app into sd card and I did it but after doing that I ran into some problem with all apps suddenly stopped and I will end up factory resetting every time. This time I used mounts2sd and I created the startup script and init.d. When I rebooted for mounting the sd card second partition, it booted for more than 10 minutes so I factory resetted it. But after resetting also when I tried to boot, it boots for a long time. So I thought of flashing the stock ROM and I used it with sp flash tool but I get an error S_FT_ENABLE_DRAM_FAIL (4032). Now the phone does not show up anything when I pressed the power button or any combination but when I connect it to my computer it is detected and the sp tool gives same error. During the flash I first tried with a37 stock ROM but second time I wrongly downloaded a37b stock ROM from another site but I got the same error in both cases. I tried different sp flash tool versions. Here is the google drive link to logs folder
https://drive.google.com/file/d/0B0VHdfl5tDqZaC03ZEhTVWQ0RUk/view?usp=sharing
I am making this thread so that any one who are in a similar problem can get solution from someone who gets it. Thank you

Hi,
I can't find anything relevant on XDA for your device and issue, but you can ask for help here,
http://forum.xda-developers.com/android/help
Good luck!

Hard bricked when flashing

I was trying to root my unite 2 using sp flash tools but it failed and my mobile is not switching on even it is not getting charged but it is detected by pc.Can someone tell any solution

jeevan123 said:
I was trying to root my unite 2 using sp flash tools but it failed and my mobile is not switching on even it is not getting charged but it is detected by pc.Can someone tell any solution
Click to expand...
Click to collapse
If its detected by PC, then using SP flash tools, try flashing a new ROM again... and it should be back to normal again....

when iam flashing to my mobile error occurred that ERROR 4032 : Enable DRAM failed! what i do >? plz help me i am downgrading to lollipop to kitkat help me please

Did anyone found the solution?

i need the same information
i am also unable to format my previous rom...................

plz help
i have micromax unite 2.my phone was hard bricked.and i tooked it to the repair shop where he opened my phone,did something wit it then next day he returned me my phone saying it will not work.....after few days i again tried sp flash tool to just gave it a check and i was able to flash new rom to it .now my phone is booting up i heard the bootup sound,even the volume rockers are working but it is showing nothing on the screen .what would be the problem....plz help

[email protected] said:
i have micromax unite 2.my phone was hard bricked.and i tooked it to the repair shop where he opened my phone,did something wit it then next day he returned me my phone saying it will not work.....after few days i again tried sp flash tool to just gave it a check and i was able to flash new rom to it .now my phone is booting up i heard the bootup sound,even the volume rockers are working but it is showing nothing on the screen .what would be the problem....plz help
Click to expand...
Click to collapse
take it to micromax care they will flash stock software to it . i had same problem a year ago

[Completed] Acer T06 touchscreen. Urgent help, please!!

Hello smart people !
Please someone can help me, please?
I have an Acer T06 that I am using just like a paperweight
I have installed the wrong twrp because the link was wrong: https://forum.xda-developers.com/android/help/help-how-to-root-acer-liquid-zest-3g-t3420325
After this, the touchscreen is no more working. Mouse and keyboard are no detected.
In some micro-points the touch works, but just in some moment.
Pressing and swiping repeatedly with the palm of my hand, I am even able to unlock the screen, sometimes.
Now I have the right twrp installed and I am working in adb via a modified twrp that supports adb.
- I did a test with SP flash tool --> Error: nand flash was not detected. Error: UFS was not detected.
- Factory kit test gives me this error: firmware detected failed, ctp firmware version (provide by ctp vendor): b1.
The following values are read from the tablet!!
ctp firmware version: a1
ctp driver: Himax852xes_himaxctp.
I have formatted all and reinstalled all with sp flash tool and SP MDT tool, but the touchscreen still does not work.
I have formatted all and re-installed via TWRP: the same.
I can not install apps into phone because I can not use the touchscreen.
In some micro-points the touch works, but only in some moments.
Pressing and swiping repeatedly with the palm of my hand, I am even able to unlock the screen, sometimes.
I have asked almost everywere, but nobody is able to solve this problem.
Please, there is someone able to help me, please?
Otherwise I have to resign to throw the almost new phone in the trash.
I thank you in advance to anyone will try to help me
Greetings!

MasterSheea said:
Hello smart people !
Please someone can help me, please?
I have an Acer T06 that I am using just like a paperweight
I have installed the wrong twrp because the link was wrong: https://forum.xda-developers.com/android/help/help-how-to-root-acer-liquid-zest-3g-t3420325
After this, the touchscreen is no more working. Mouse and keyboard are no detected.
In some micro-points the touch works, but just in some moment.
Pressing and swiping repeatedly with the palm of my hand, I am even able to unlock the screen, sometimes.
Now I have the right twrp installed and I am working in adb via a modified twrp that supports adb.
- I did a test with SP flash tool --> Error: nand flash was not detected. Error: UFS was not detected.
- Factory kit test gives me this error: firmware detected failed, ctp firmware version (provide by ctp vendor): b1.
The following values are read from the tablet!!
ctp firmware version: a1
ctp driver: Himax852xes_himaxctp.
I have formatted all and reinstalled all with sp flash tool and SP MDT tool, but the touchscreen still does not work.
I have formatted all and re-installed via TWRP: the same.
I can not install apps into phone because I can not use the touchscreen.
In some micro-points the touch works, but only in some moments.
Pressing and swiping repeatedly with the palm of my hand, I am even able to unlock the screen, sometimes.
I have asked almost everywere, but nobody is able to solve this problem.
Please, there is someone able to help me, please?
Otherwise I have to resign to throw the almost new phone in the trash.
I thank you in advance to anyone will try to help me
Greetings!
Click to expand...
Click to collapse
Greetings and welcome to assist. Unfortunately assist is for guiding new members around the boards only, you need to ask your question here
https://forum.xda-developers.com/android/help
All I can suggest is downloading the latest firmware for your device from the manufacturer and installing that with fastboot
Thanks for understanding
Sawdoctor