Database Info

My new tecno 7C android 5.0 is brocken! Help please...

Hello elders. I hope that I'm in the right session for my ask. I have tried to update my tecno 7c android 5.0 based tablet (that I've bought, just a month ago) cause it proposed it to me in the settings, software update option. Everything went well till the end of the download. After that, my tablet rebooted correctly and came to the android home screen. But each time I put any SIM card inside, I always have this message: "com.phone stopped working". I've tried to perform a full reset of the phone through the stock recovery but I don't even have access to recovery now. The phone is MTK 6582 processor based tablet. I've tried to read on internet to see if there's a way to fix it but the one I've found explained that I need a same working tablet whose backup file I'll flash on the bricked one through SP FlashTool to revive it but I have nobody having such tablet. Help please if you have solutionq for me. Very urgent. My tablet, the only on I have! Thanks in advance.

Hello! Nobody to answer me?

[Completed] Micromax A110 Canvas 2 soft bricked!

I have a Micromax A110 that uses :
H/W Ver.: V1.0
S/W Ver.: V1.11
Its been a long time that my phone is bricked, actually I got an error "Encryption unsuccessful" after that I booted up the phone in Factory Mode and Wiped all the data.
Just after that, I tried flashing a stock rom using SP Flash Tool (Latest one) & Old one too, now every time I click on download, it encounters an error "brom error : S_DL_PMT_ERR_NO_SPACE (5069)". I have also tried Firmware->Upgrade option but that does not work either.
The phone is detectable in Device Manager, I have also tried installing drivers again n' again but nothing seems like working.
Also I have found out from memory test in SP Flash Tool that NAND Flash is not detected. I don't know whether it has something to do with Flashing or not.
Please help me out to solve this, I'd be very grateful of any helpful reply given in here.
Thanks.

Ali147852 said:
I have a Micromax A110 that uses :
H/W Ver.: V1.0
S/W Ver.: V1.11
Its been a long time that my phone is bricked, actually I got an error "Encryption unsuccessful" after that I booted up the phone in Factory Mode and Wiped all the data.
Just after that, I tried flashing a stock rom using SP Flash Tool (Latest one) & Old one too, now every time I click on download, it encounters an error "brom error : S_DL_PMT_ERR_NO_SPACE (5069)". I have also tried Firmware->Upgrade option but that does not work either.
The phone is detectable in Device Manager, I have also tried installing drivers again n' again but nothing seems like working.
Also I have found out from memory test in SP Flash Tool that NAND Flash is not detected. I don't know whether it has something to do with Flashing or not.
Please help me out to solve this, I'd be very grateful of any helpful reply given in here.
Thanks.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. Please ask your questions in your device's Q&A forum here:
A110 Q&A, Help and Troubleshooting
Good luck!

[Completed] Lenovo VIBE P1 bricked. Please help

Hello. I have a new Lenovo VIBE P1 chinese edition (3GB Ram and 16GB internal memory).
When arrived was installed a multilingual ROM. Some messages were in chinese, but it works. A message appeared that there was an update for that ROM. I made the update (the mobile made all automatically without connecting to the PC). When the update finished I only had chinese and english, not multilingual, and the playstore dissapeared. If anybody have this same mobile whith multilingual ROM be careful with rom automatic updates, the new ROM don't work well and you loose multilingual.
I tried to install the older ROM using QPST, but sure I do something wrong. Now the mobile phone is bricked without activity. Impossible to open the recovery, it does nothing and the screen is always off, like dead.
Reading some post I tried to unbrick it, but the only thing that I can get is to recognize the mobile in download mode when I plug to the PC with the eMMC download opened or the QFIL. When I try to download a new ROM or recovery nothing works, it says "Switch to EDL fail".
If anybody knows a way to flash a recovery and a ROM to unbrick the mobile, please tell me ideas. I don't know what more I can do. Thanks for your help.

yayator said:
Hello. I have a new Lenovo VIBE P1 chinese edition (3GB Ram and 16GB internal memory).
When arrived was installed a multilingual ROM. Some messages were in chinese, but it works. A message appeared that there was an update for that ROM. I made the update (the mobile made all automatically without connecting to the PC). When the update finished I only had chinese and english, not multilingual, and the playstore dissapeared. If anybody have this same mobile whith multilingual ROM be careful with rom automatic updates, the new ROM don't work well and you loose multilingual.
I tried to install the older ROM using QPST, but sure I do something wrong. Now the mobile phone is bricked without activity. Impossible to open the recovery, it does nothing and the screen is always off, like dead.
Reading some post I tried to unbrick it, but the only thing that I can get is to recognize the mobile in download mode when I plug to the PC with the eMMC download opened or the QFIL. When I try to download a new ROM or recovery nothing works, it says "Switch to EDL fail".
If anybody knows a way to flash a recovery and a ROM to unbrick the mobile, please tell me ideas. I don't know what more I can do. Thanks for your help.
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
You can post your query in Vibe P1 Discussion Thread.Experts there may be able to help you
___
v7
XDA Assist

Thanks. I do it now

[Completed] Huawei Y6 SCL_L01 Softbricked?

Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.

Asdforcer said:
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Click to expand...
Click to collapse
Hi, Thanks for using XDA assist.
It looks like there is no dedicated forum for your device, however
There is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get expert's help.
Good luck

[Completed] Doogee X5 Pro Bricked

Ok, i have a doogee x5 pro phone and i tried to root it by flashing twrp recovery using sp flash tools. While flashing i got the error "PMT Changed for the rom it must be download". So i did a small research on internet and i found out that i needed to format everything except bootloader. This succeded. So after that i tried to install the firmware with this succeding to. Unfortunately the time i tried to turn phone on it was dead. SP Flash Tools wont detect it anymore. Please help me cause the phone is not mine and its brand new! I can rate my self as moderate android user. :crying:

i think i have a bigger problem... I downloaded a stock rom for doogee max pro(cause i just realised it wasnt just pro it was max pro) and it didnt seem to be recognised again. Any help would be appreciated. I constantly keep trying to raise it from the deads. Thanks!

Ap0s said:
i think i have a bigger problem... I downloaded a stock rom for doogee max pro(cause i just realised it wasnt just pro it was max pro) and it didnt seem to be recognised again. Any help would be appreciated. I constantly keep trying to raise it from the deads. Thanks!
Click to expand...
Click to collapse
On mtk devices a preloader is independently installed, it should be almost impossible to destroy, I owned a x5 pro and had best success to flash it with sp flash by taking out the battery, press flash button and plug it in...
The second huge issue I see is when you used the specific flash tool format option you very, very likely killed the nvram partition which contained the imei, so you'll have to fix this too by generating a new one and using mtk engineer mode which is well described and to find on Google..
But let's go step by step. Check without battery, or if it's a non replaceable you'll need find the reset button..

i have tried before without battery and i tried just now but nothing. Its very weird it was detected before and now no in same and another machine. I am pretty confused and stressed. Hope i didnt do any physical damage.. :crying:. THANKS!

starting to get pretty stressed omg! and is there a difference between MT6737M and MT6737?

i came to the point im starting to lose my mind... tried everything i could, i have 5 days left to repair this phone and i dont wanna pay 85 euros for this. SP Flash Tools wont detect the phone. Tried almost 5 different scatter files,2 different PCs and different mtk drivers. Im losing my mind already

UPDATE: I almost fixed it! I had flashed wrong preloader so phone wasn't recognized by SP Flash Tool. I fixed preloaded with a little trick from here: link. After that i flashed stock rom downloaded from doogee.cc but phone will not boot resulting in a total black screen. When i hot Power + Vol Up it takes me to another screen:
Select Boot Mode:
Recovery
Bootloader
Normal
Doesn't matter which boot mode i choose i just get a total black screen which means i get nothing. Idk what is happening! Any further help would be appreciated! I constantly try to bring it back working with little success and small improvements.

Last UPDATE: FIXED my phone had no juice left inside so couldnt complete boot proccess. Now its all good running Btw someone must pin this META trick link i send on my previous post cause im sure more people out there have preloader issues!!! Thank you everyone!!

Sam Nakamura said:
On mtk devices a preloader is independently installed, it should be almost impossible to destroy, I owned a x5 pro and had best success to flash it with sp flash by taking out the battery, press flash button and plug it in...
The second huge issue I see is when you used the specific flash tool format option you very, very likely killed the nvram partition which contained the imei, so you'll have to fix this too by generating a new one and using mtk engineer mode which is well described and to find on Google..
But let's go step by step. Check without battery, or if it's a non replaceable you'll need find the reset button..
Click to expand...
Click to collapse
And yes i couldnt flash it with battery only with!