Hello. I have a new Lenovo VIBE P1 chinese edition (3GB Ram and 16GB internal memory).
When arrived was installed a multilingual ROM. Some messages were in chinese, but it works. A message appeared that there was an update for that ROM. I made the update (the mobile made all automatically without connecting to the PC). When the update finished I only had chinese and english, not multilingual, and the playstore dissapeared. If anybody have this same mobile whith multilingual ROM be careful with rom automatic updates, the new ROM don't work well and you loose multilingual.
I tried to install the older ROM using QPST, but sure I do something wrong. Now the mobile phone is bricked without activity. Impossible to open the recovery, it does nothing and the screen is always off, like dead.
Reading some post I tried to unbrick it, but the only thing that I can get is to recognize the mobile in download mode when I plug to the PC with the eMMC download opened or the QFIL. When I try to download a new ROM or recovery nothing works, it says "Switch to EDL fail".
If anybody knows a way to flash a recovery and a ROM to unbrick the mobile, please tell me ideas. I don't know what more I can do. Thanks for your help.
yayator said:
Hello. I have a new Lenovo VIBE P1 chinese edition (3GB Ram and 16GB internal memory).
When arrived was installed a multilingual ROM. Some messages were in chinese, but it works. A message appeared that there was an update for that ROM. I made the update (the mobile made all automatically without connecting to the PC). When the update finished I only had chinese and english, not multilingual, and the playstore dissapeared. If anybody have this same mobile whith multilingual ROM be careful with rom automatic updates, the new ROM don't work well and you loose multilingual.
I tried to install the older ROM using QPST, but sure I do something wrong. Now the mobile phone is bricked without activity. Impossible to open the recovery, it does nothing and the screen is always off, like dead.
Reading some post I tried to unbrick it, but the only thing that I can get is to recognize the mobile in download mode when I plug to the PC with the eMMC download opened or the QFIL. When I try to download a new ROM or recovery nothing works, it says "Switch to EDL fail".
If anybody knows a way to flash a recovery and a ROM to unbrick the mobile, please tell me ideas. I don't know what more I can do. Thanks for your help.
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
You can post your query in Vibe P1 Discussion Thread.Experts there may be able to help you
___
v7
XDA Assist
Thanks. I do it now
Related
HI
I just purchased a Chines mobile name HONMI. They said it is 4x2 core but it is dual come. Mostly applications were in Chines I tried to delete some Chinese files but after deleting the Mobile is not coming back. It stuck after booting and not coming as menu, showing only black screen. I have tried to flash ROM by SP Flash Tool. One time it did it and after it is not doing. Also not recongnising the USB.
I appreciate any help to resolve the problem.
Best Regards.
A. Muqtadir
http://forum.xda-developers.com/images/icons/icon9.gif
You can fix your phone by flashing a correct ROM. Chinese phones can't get bricked. If you flash wrong preloader, you won't be able to boot it, but just get a correct preloader and flash it by pressing and holding VOL+ button before you connect the phone. It will start working again. Check for original ROM at www.NeedRom.com
Also using MTK Droid Tools will tell you real chipset. It can't trick you by telling you it's a quad-core if it's dual-core.
You can also blame the seller and ask for money back.
ok i've got a note 4 clone i occidentally bricked it when i tried to flash an miui rom zip in cwm. now It wont turn on anymore ,but it gets detected at the device manager (Mtk usb v com) although it keeps connects and disconnects, what i have is a cwm backup i cant get spft to download the cwm backup i also dont have a scatter file i tried to load an mtk scatter file for the mtk chip 6572 didn't work either spft says there is a mismatch and sometimes DRAM FAIl error messages any ideas?
kinzy2004 said:
ok i've got a note 4 clone i occidentally bricked it when i tried to flash an miui rom zip in cwm. now It wont turn on anymore ,but it gets detected at the device manager (Mtk usb v com) although it keeps connects and disconnects, what i have is a cwm backup i cant get spft to download the cwm backup i also dont have a scatter file i tried to load an mtk scatter file for the mtk chip 6572 didn't work either spft says there is a mismatch and sometimes DRAM FAIl error messages any ideas?
Click to expand...
Click to collapse
Hello, this is herna from XDA Assist.
I´m sorry for what you faced with your device, but this is the main problem about buying and using clone devices. I can´t help with that since there a ton of clones and most of clones use to be very poor devices.
My suggestion is you to try to reach whoever sent you the device or the company which created it, or try to search on Google for someone who also has the device.
As a personal suggestion, if you are out of money, next time you buy a device, and wanna custom it and play with it like you tried with your device, try to reach some Motorola or "most famous" device, where you will have a bigger development under it, and you will have solutions for almost all the troubles.
I wish you get back your device on working, and also wish you to spend a nice weekend.
Hello elders. I hope that I'm in the right session for my ask. I have tried to update my tecno 7c android 5.0 based tablet (that I've bought, just a month ago) cause it proposed it to me in the settings, software update option. Everything went well till the end of the download. After that, my tablet rebooted correctly and came to the android home screen. But each time I put any SIM card inside, I always have this message: "com.phone stopped working". I've tried to perform a full reset of the phone through the stock recovery but I don't even have access to recovery now. The phone is MTK 6582 processor based tablet. I've tried to read on internet to see if there's a way to fix it but the one I've found explained that I need a same working tablet whose backup file I'll flash on the bricked one through SP FlashTool to revive it but I have nobody having such tablet. Help please if you have solutionq for me. Very urgent. My tablet, the only on I have! Thanks in advance.
Hello! Nobody to answer me?
Hello everyone this is my first post on this forum.Greetings to everyone!
I have Lenovo A536 android 4.4 smartphone rooted with Kingroot app
I tried to update vibeUi this morning despite the warning of rooted device:angel:.Update failed and i removed the battery when screen stopped cause device didnt turn off from power button
>Phone now enters only Boot recovery menu and reaches till lenovo logo.The phone doesnt recognise SD Card
I tryed to wipe data/factory defaults and cache so far from boot recovery menu.The other options didnt work.
>Tried so far stock roms A536_S175_150105_ROW
, A536_S147_140910_ROW with Smart Phone Flash Tool a
nd Sp Flash Tool without any luck.Also Installed SDK Tools with 4.4.2 and run through CMD line
but commands wont respond.(trying adb bridge)
Please provide me with info explain me with details what should i do, because i am total amateur using
android tools.I know it was dumb to do those things to phone so i am paying the price now (The warranty of the phone is on if i messed it badly).
Thanks in advance.
AndroidNoobUser said:
Hello everyone this is my first post on this forum.Greetings to everyone!
I have Lenovo A536 android 4.4 smartphone rooted with Kingroot app
I tried to update vibeUi this morning despite the warning of rooted device:angel:.Update failed and i removed the battery when screen stopped cause device didnt turn off from power button
>Phone now enters only Boot recovery menu and reaches till lenovo logo.The phone doesnt recognise SD Card
I tryed to wipe data/factory defaults and cache so far from boot recovery menu.The other options didnt work.
>Tried so far stock roms A536_S175_150105_ROW
, A536_S147_140910_ROW with Smart Phone Flash Tool a
nd Sp Flash Tool without any luck.Also Installed SDK Tools with 4.4.2 and run through CMD line
but commands wont respond.(trying adb bridge)
Please provide me with info explain me with details what should i do, because i am total amateur using
android tools.I know it was dumb to do those things to phone so i am paying the price now (The warranty of the phone is on if i messed it badly).
Thanks in advance.
Click to expand...
Click to collapse
Hi,
Thank you for using XDA assist
There is no dedicated forum for your device. However there is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get the expert's help
Good luck.
I need HELP with my Lenovo A816.
My phone is stuck, it turns ON and turns off. It comes as far as Lenovo logo and that's it. When it turns on, just vibrates, comes to logo and shutsdown again, and keeps doing that all the time.
I can't access anymore recovery menu, only Lenovo recovery but it does not help at all.
I accidentaly erased Lenovo launcher.
It doesn't get recognized via USB-PC. I tried flashing tools Qualcomm emmc download tool, qpst etc...
Can someone guide me how to repair the phone (flash custom ROM).
I have my wifes A816 which is working ok (except it also needs flashing ROM because of the chinese junk apps nad gapps not working, but don't want to ruin this phone also). Maybe having another would help rescuing my A816.
Please, anybody HELP.
Hi,
as there is no specific subforum for your device, ask your question here after registering. Good luck!