Hello elders. I hope that I'm in the right session for my ask. I have tried to update my tecno 7c android 5.0 based tablet (that I've bought, just a month ago) cause it proposed it to me in the settings, software update option. Everything went well till the end of the download. After that, my tablet rebooted correctly and came to the android home screen. But each time I put any SIM card inside, I always have this message: "com.phone stopped working". I've tried to perform a full reset of the phone through the stock recovery but I don't even have access to recovery now. The phone is MTK 6582 processor based tablet. I've tried to read on internet to see if there's a way to fix it but the one I've found explained that I need a same working tablet whose backup file I'll flash on the bricked one through SP FlashTool to revive it but I have nobody having such tablet. Help please if you have solutionq for me. Very urgent. My tablet, the only on I have! Thanks in advance.
Hello! Nobody to answer me?
Related
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Sooo,
You probably don't have proper drivers, use PDANet ones, they work even with obscure tablets.
You tried to port CWM or flash?
It's not bricked since your computer detects it
Last thing, do you have a backup recovery image or another recovery image that works so you can get it back up?
Daniel
I was dumb enough not to do any recovery image backups..
Also.. I ported cwm then flashed it with dd just poped the .img into the recovery block.. but since I didn't compile it properly when I adb reboot recovery.. It got into a boot loop.. so I tried to fix it but broke it even more... So then I tried re-writing the firmware for generic 4.1.2 chinese tablet.. but that messed it up to the point were it only shows as M6-CHIP.. i can only turn on and off.. nothing else.. no boot no screen light up nothing..
I can help you BUT....
loureirom_ said:
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Click to expand...
Click to collapse
Even i am having the same device on its stock rom and kernel so i guess i can help you i was into rooting and upgrading it but didnt do it as i was waiting for a backup device so if i brick it i dont have to wait to buy a device but i am stupid and dont know how to take a backup of the stock rom. If you will help me know how to do that i can help you in return by uploading the stock rom and sharing the link.:highfive:
Hello all, It's been awhile since I've been on.... A big while But things have changed a lot around and looks great, But on with my question. I have a M horse N9000W MTK6572, And recently tried a sys file restore using titanium backup and the process froze with a error stating that me deviceID had changed, Then the phone proceeded to reboot, But upon booting up it just stays on the android logo. Before this problem I was able to go into factory recovery as I only had the phone rooted but no custom recovery or firmware, And now no recovery using any button combo. I have asked a few on ebay if there jig or jtag would help but they all say not on the china clone as of yet. So is my phone a cool digital android desktop picture, Or is there a method someone knows
My pc nor mac recognize the device anymore either. Thanks in advance for any info or help
Hi,
I have searched and do not find information that is helpful.
With no recovery and no recognition from the computer, I'm afraid this is a hard brick.
Sorry, I know it is not what you wanted to hear. - support for almost any clone device is scarce at best.
hello everybody...
i have a (spanish jazztel) i-joy 10" tablet, cortex a7 quad core.
i made a mess with titanium backup and when tried to recover factory settings i realized that i had screwed the recovery data.
system would boot up, tablet would work but with many errors and "stopped working" pop ups.
i looked for a stock rom just to find out there is NONE in the WHOLE INTERNET!!!
then, googling here and there i read about some compatible roms, from allwinner, kalley and other chinese brands.
i downloaded all img files i could find, i flashed them correctly with phoenix usb pro, one after another.
first two worked well except for the cameras, that wouldnt work.
then i tried ICOU10GT firmware, flashed correctly...but touch DOES NOT work, i cannot go any further from welcome screen since the touch screen is not recognized.
i am 100% sure is not a hardware problem, all physical buttons work, screen works but not touch.
since i cannot reach the "enable usb debug mode" option i cannot flash any other img.
when entering recovery mode, if i choose update from adb the tablet is not fully recognized by windows (driver says device cannot start).
i´ve tried sd burning with phoenixcard but doesnt work either, tablet doesnt boot up from external sd card.
is there any way to recover this working-but-bricked tablet?
please help!!!
------------------
if there is not....is there a 100% safe and sure way to commit a "perfect murder" with the tablet to send it to post-service and being able to claim "it just stopped working" and them not being able to see i flashed it? i guess you know what i mean.
planetapluton said:
hello everybody...
i have a (spanish jazztel) i-joy 10" tablet, cortex a7 quad core.
i made a mess with titanium backup and when tried to recover factory settings i realized that i had screwed the recovery data.
system would boot up, tablet would work but with many errors and "stopped working" pop ups.
i looked for a stock rom just to find out there is NONE in the WHOLE INTERNET!!!
then, googling here and there i read about some compatible roms, from allwinner, kalley and other chinese brands.
i downloaded all img files i could find, i flashed them correctly with phoenix usb pro, one after another.
first two worked well except for the cameras, that wouldnt work.
then i tried ICOU10GT firmware, flashed correctly...but touch DOES NOT work, i cannot go any further from welcome screen since the touch screen is not recognized.
i am 100% sure is not a hardware problem, all physical buttons work, screen works but not touch.
since i cannot reach the "enable usb debug mode" option i cannot flash any other img.
when entering recovery mode, if i choose update from adb the tablet is not fully recognized by windows (driver says device cannot start).
i´ve tried sd burning with phoenixcard but doesnt work either, tablet doesnt boot up from external sd card.
is there any way to recover this working-but-bricked tablet?
please help!!!
------------------
if there is not....is there a 100% safe and sure way to commit a "perfect murder" with the tablet to send it to post-service and being able to claim "it just stopped working" and them not being able to see i flashed it? i guess you know what i mean.
Click to expand...
Click to collapse
In the edit comment you wrote "Last edited by planetapluton; 28th May 2015 at 07:44 AM. Reason: problem solved!" This thread will be closed.
If you have another issue with this device, please post in Android Q&A, Help & Troubleshooting
Hi. The last days I`ve had flashed the Allview A5 Smiley because I`d forgotten the security code and I couldn`t get in it. I couldn`t found an original ROM for this kind of device but I`ve tried to install a ROM from Wiko Iggy because it seemed for me that they`re pretty the same. The flashing went well but after that the Allview didn`t want to turn back on anymore and my windows does not recognize it at all. So the device is completely dead. I don`t know what to do. I`ve tried to flash another ROM MT6582 for Allview A5 Duo but I couldn`t because the computer don`t see the phone connected. With battery or without it`s the same thing. Sometimes it tries to connect but I receive an error that says: DRAM failed and The device powered to fast (something like that). Please help me because I don`t know what to do anymore.
P.S.: The flashing was done with the latest SP Flash Tool. Thank you!
Another thing
doctorgadget said:
Hi. The last days I`ve had flashed the Allview A5 Smiley because I`d forgotten the security code and I couldn`t get in it. I couldn`t found an original ROM for this kind of device but I`ve tried to install a ROM from Wiko Iggy because it seemed for me that they`re pretty the same. The flashing went well but after that the Allview didn`t want to turn back on anymore and my windows does not recognize it at all. So the device is completely dead. I don`t know what to do. I`ve tried to flash another ROM MT6582 for Allview A5 Duo but I couldn`t because the computer don`t see the phone connected. With battery or without it`s the same thing. Sometimes it tries to connect but I receive an error that says: DRAM failed and The device powered to fast (something like that). Please help me because I don`t know what to do anymore.
P.S.: The flashing was done with the latest SP Flash Tool. Thank you!
Click to expand...
Click to collapse
I`ve forgotten to say that first flashing was done with MT6572 and in sp flash tool I`ve checked Format & download all.
Hi there,
I'm sorry but I can't find anything related to your question/device.
You must start asking that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Hi all,
I have a Yonestoptech BS1078 (ID from motherboard), also designated (Q102 in About Tablet) It's a 10.1" tablet with the quadcore Allwinner A31S chipset
the device came fully rooted. Firmware is stock as originally supplied.
The original recovery I found virtually useless (a known problem with this device), so I looked for a custom recovery on this page ...
http://www.slatedroid.com/topic/106714-twrp-271-recovery-sdk3x/
I flashed TWRP with the the first one on the list flashed via a terminal on the device
... WRONG !, recovery was oversized and totally unusable, the only two buttons I see, Install and Backup do nothing. That was the first mistake, second
was that I never tried to reflash with any of the others. I was told much too late to be of use, that the one for Fusion5 xtra works well on this device.
Next BRAINFOG, sometime later, and the faulty recovery half forgotten, ... one of the main use of this family tab is for downloading and reading our morning
newspaper ... we started having problems with the app, tried a reinstall of that which wasn't the full answer, so went for factory reset of the tab ...
WRONG again, as you'd expect the device rebooted into the faulty recovery, and stuck there, and that's exactly as it is now, each boot up is into the recovery
and no further.
I downloaded the stock firmware from ...
http://vondroid.com/resources/q102-a31s-tablet-stock-firmware.493/#.VbJdsrXppjo
All attempts to flash this have failed, I've tried with Livesuite, Phoenixsuite, PhoenixUSBPro, and Phoenixcard
I should add that device shows correctly in Device Manager as "Android ADB Interface", so I don't think drivers are a problem
I've tried to reset using Android Multi tools also GpGTools ... no joy
Last thing tried was to flash fastboot for Allwinner devices from
https://bugzilla.mozilla.org/show_bug.cgi?id=1026963 ... no joy either.
From these results I suspect USB debugging isn't enabled, but can't be sure if I ever looked at that when the tab was working.
I do read that Allwinner devices are virtually unbrickable, whatsay Guys have I created a brick with this comedy of errors ?, is there hope ?.
Re. my capabilities I have a little experience of adb, and rooting tabs phones etc. I'm no expert, but can usually follow instructions.
Apologies for long post, thought it best to give the full story. ... J
Solution found
jachol said:
Hi all,
I have a Yonestoptech BS1078 (ID from motherboard), also designated (Q102 in About Tablet) It's a 10.1" tablet with the quadcore Allwinner A31S chipset
the device came fully rooted. Firmware is stock as originally supplied.
The original recovery I found virtually useless (a known problem with this device), so I looked for a custom recovery on this page ...
http://www.slatedroid.com/topic/106714-twrp-271-recovery-sdk3x/
I flashed TWRP with the the first one on the list flashed via a terminal on the device
... WRONG !, recovery was oversized and totally unusable, the only two buttons I see, Install and Backup do nothing. That was the first mistake, second
was that I never tried to reflash with any of the others. I was told much too late to be of use, that the one for Fusion5 xtra works well on this device.
Next BRAINFOG, sometime later, and the faulty recovery half forgotten, ... one of the main use of this family tab is for downloading and reading our morning
newspaper ... we started having problems with the app, tried a reinstall of that which wasn't the full answer, so went for factory reset of the tab ...
WRONG again, as you'd expect the device rebooted into the faulty recovery, and stuck there, and that's exactly as it is now, each boot up is into the recovery
and no further.
I downloaded the stock firmware from ...
http://vondroid.com/resources/q102-a31s-tablet-stock-firmware.493/#.VbJdsrXppjo
All attempts to flash this have failed, I've tried with Livesuite, Phoenixsuite, PhoenixUSBPro, and Phoenixcard
I should add that device shows correctly in Device Manager as "Android ADB Interface", so I don't think drivers are a problem
I've tried to reset using Android Multi tools also GpGTools ... no joy
Last thing tried was to flash fastboot for Allwinner devices from
https://bugzilla.mozilla.org/show_bug.cgi?id=1026963 ... no joy either.
From these results I suspect USB debugging isn't enabled, but can't be sure if I ever looked at that when the tab was working.
I do read that Allwinner devices are virtually unbrickable, whatsay Guys have I created a brick with this comedy of errors ?, is there hope ?.
Re. my capabilities I have a little experience of adb, and rooting tabs phones etc. I'm no expert, but can usually follow instructions.
Apologies for long post, thought it best to give the full story. ... J
Click to expand...
Click to collapse
I found I could flash this firmware ...
http://chinagadgetsreviews.blogspot.fr/2015/04/download-android-kitkat-442-stock_45.html
using PhoenixCard, it's not quite as original, but it is KitKat, and comes ready rooted. ... J.