Hi All ,
I have a xolo q1010i which was running on few custom roms previously before I managed to get the flash stock rom from (brieftutorials.com/how-to-unbrick-xolo-q1010i-by-installing-stock-rom/[/url])
Now I used the SP flash tool to unbrick it and install the stock rom, it worked fine until i found that the IMEI was lost.
Still i managed to insert imei using uncle tools and everything was fine.
this is where the problem starts:
I got an update OTA for KitKat and once I updated it the phone was stuck in a loop
So i connected sp flash tool and ran the 4.2.2 stock rom, but suddenly half way I got an error messasge and that was the end.
I have a black screen device on which nothing works, no logo , no charging light, no power + volume up, no power+volume up+down etc .
Not even lights,
Windows says an unidentified device detected and SP flash tool does'nt work.
Have no clue what to do , Is this the end ? or do I have to try the USB Jig / send it for Jtag repair ?
All comments & Ideas appreciated.
Thanks in advance
_____________
Hola,
I managed to resurrect my mobile, I tried Jtag to bypass the preloader by researching a lot ( thanks to my all posts china mobile website) then used SP tools to flash the stock rom ( thanks to Kalaishere XDA )
Finally its working on Jellybean.
I will soon update it and also fix the tiny issue with no imei number
Issue resolved, thread closed, thanks.
Related
I was trying to root my unite 2 using sp flash tools but it failed and my mobile is not switching on even it is not getting charged but it is detected by pc.Can someone tell any solution
jeevan123 said:
I was trying to root my unite 2 using sp flash tools but it failed and my mobile is not switching on even it is not getting charged but it is detected by pc.Can someone tell any solution
Click to expand...
Click to collapse
If its detected by PC, then using SP flash tools, try flashing a new ROM again... and it should be back to normal again....
when iam flashing to my mobile error occurred that ERROR 4032 : Enable DRAM failed! what i do >? plz help me i am downgrading to lollipop to kitkat help me please
Did anyone found the solution?
i need the same information
i am also unable to format my previous rom...................
plz help
i have micromax unite 2.my phone was hard bricked.and i tooked it to the repair shop where he opened my phone,did something wit it then next day he returned me my phone saying it will not work.....after few days i again tried sp flash tool to just gave it a check and i was able to flash new rom to it .now my phone is booting up i heard the bootup sound,even the volume rockers are working but it is showing nothing on the screen .what would be the problem....plz help
[email protected] said:
i have micromax unite 2.my phone was hard bricked.and i tooked it to the repair shop where he opened my phone,did something wit it then next day he returned me my phone saying it will not work.....after few days i again tried sp flash tool to just gave it a check and i was able to flash new rom to it .now my phone is booting up i heard the bootup sound,even the volume rockers are working but it is showing nothing on the screen .what would be the problem....plz help
Click to expand...
Click to collapse
take it to micromax care they will flash stock software to it . i had same problem a year ago
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
rudycroes said:
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
Click to expand...
Click to collapse
Hello,
Please try posting your query here Ask any Query Newbie friendly with all relevant details, the experts there maybe able to assist you.
-Vatsal
:silly: delicious matter for xda-developers [!!help me!! my bricked device keeps reconnect and disconnect quickly 3 sec with my pc ;so I can't restore stock rom on my device]
hi guys,since two day I've flashed my device with wrong rom :angel:{I'm not know about flashing wrong rom because I browsed a lot of porting roms subject in some forums then I've become able to flash my device and I've knowledge about this operating but I believed like this "now I owned the world " :laugh:after installing custom recovery cwm and backuping overall the device}.
however I flashed three rom adapted with my tablet before porting the wrong rom.
in abbreviately,after wrong rom the tablet is in boot loop 5 sec and restart,is it stuck in manufacture lego
which are mayhem picture after flashing the wrong rom then restart again .
I try and try again to booting into custom recovery
but is unuseful the tablet not reach custom recovery with pressing (vol.up button +pwr.button)
or reach factory mod with pressing (vol.down button+pwr buttton).
now,I try to fix the problem when connect the tablet with my pc via usb cord
,my bricked device reconnect & disconnect with pc quickly almost 3 sec ,usb cable otg is perfect functional though
is it occurring (I able to driving the tablet but I am not able to flashing with flashing tools such as : sp flash tool & mtkdroid tools)
the trouble is not fix when pressing (vol.up or vol.down or both these or both these with pwr or pwr alone ) before plug otg cable with my pc.
I searched and watched solved mtk problem on youtube but my trouble is not similar anything of this problems
and nothing about this on sites and forums.:crying:
in addition to :
I disassembly the case of my tablet and disconnect the battery connection with tablet motherboard
but same result.
!!!!please tell my how to fix this trouble!!! and able to flash stock rom
detail device
name :CCIT A799W (china tablet)
cpu :mediatek 6572
intsd: 8G
RAM : 1g
ANDRO: 4.2.2 (jellybean)
board: HX-M706-MB-V1.1.0
N.B: the wrong rom is Lollifox_MT6572_Kitkat_Ajit_mtkroms-com exactly. they say: for mt6572 only (not mt6572 running kitkat )
for more info tell me and good luck for every body .
mohamed thebear said:
:silly: delicious matter for xda-developers [!!help me!! my bricked device keeps reconnect and disconnect quickly 3 sec with my pc ;so I can't restore stock rom on my device]
hi guys,since two day I've flashed my device with wrong rom :angel:{I'm not know about flashing wrong rom because I browsed a lot of porting roms subject in some forums then I've become able to flash my device and I've knowledge about this operating but I believed like this "now I owned the world " :laugh:after installing custom recovery cwm and backuping overall the device}.
however I flashed three rom adapted with my tablet before porting the wrong rom.
in abbreviately,after wrong rom the tablet is in boot loop 5 sec and restart,is it stuck in manufacture lego
which are mayhem picture after flashing the wrong rom then restart again .
I try and try again to booting into custom recovery
but is unuseful the tablet not reach custom recovery with pressing (vol.up button +pwr.button)
or reach factory mod with pressing (vol.down button+pwr buttton).
now,I try to fix the problem when connect the tablet with my pc via usb cord
,my bricked device reconnect & disconnect with pc quickly almost 3 sec ,usb cable otg is perfect functional though
is it occurring (I able to driving the tablet but I am not able to flashing with flashing tools such as : sp flash tool & mtkdroid tools)
the trouble is not fix when pressing (vol.up or vol.down or both these or both these with pwr or pwr alone ) before plug otg cable with my pc.
I searched and watched solved mtk problem on youtube but my trouble is not similar anything of this problems
and nothing about this on sites and forums.:crying:
in addition to :
I disassembly the case of my tablet and disconnect the battery connection with tablet motherboard
but same result.
!!!!please tell my how to fix this trouble!!! and able to flash stock rom
detail device
name :CCIT A799W (china tablet)
cpu :mediatek 6572
intsd: 8G
RAM : 1g
ANDRO: 4.2.2 (jellybean)
board: HX-M706-MB-V1.1.0
N.B: the wrong rom is Lollifox_MT6572_Kitkat_Ajit_mtkroms-com exactly. they say: for mt6572 only (not mt6572 running kitkat )
for more info tell me and good luck for every body .
Click to expand...
Click to collapse
Greetings,
Thanks for using XDA Assist.
There are no specific forums for your device so I ask that you post your questions here:
Android Q&A, Help and Troubleshooting
The experts you'll find there may be able to help you.
Good luck!
Hello guys can any body help me please i have into a big trouble after flashing weko fever rom on my Qmobile Z10.
First i flashed weko fever rom using SP flasher Tool but after flashing when i switched on my mobile it is not recognize my both sims and also Imies fields got empty. So i decided to root it but after using many tools i was unable to root my cel. So i decided to revert back to it's original stock rom so i download and refleshed using SP flasher Tool but after flashed stock rom my cel was hard bricked and unable to switched on now but when i connect USB cable only red light on and also recognized from PC. I tried lot of method from XDA website but unable to recover my cell phone back to it's orignal stat. So i decided to post here plz any Developer help me plz to recover my cell phone back to it's running state.
Plz plz plz............
Thanks in advance.
m.haseebhaider said:
Hello guys can any body help me please i have into a big trouble after flashing weko fever rom on my Qmobile Z10.
First i flashed weko fever rom using SP flasher Tool but after flashing when i switched on my mobile it is not recognize my both sims and also Imies fields got empty. So i decided to root it but after using many tools i was unable to root my cel. So i decided to revert back to it's original stock rom so i download and refleshed using SP flasher Tool but after flashed stock rom my cel was hard bricked and unable to switched on now but when i connect USB cable only red light on and also recognized from PC. I tried lot of method from XDA website but unable to recover my cell phone back to it's orignal stat. So i decided to post here plz any Developer help me plz to recover my cell phone back to it's running state.
Plz plz plz............
Thanks in advance.
Click to expand...
Click to collapse
Your problem sloved or still stuck??