Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
Related
Hi All ,
I have a xolo q1010i which was running on few custom roms previously before I managed to get the flash stock rom from (brieftutorials.com/how-to-unbrick-xolo-q1010i-by-installing-stock-rom/[/url])
Now I used the SP flash tool to unbrick it and install the stock rom, it worked fine until i found that the IMEI was lost.
Still i managed to insert imei using uncle tools and everything was fine.
this is where the problem starts:
I got an update OTA for KitKat and once I updated it the phone was stuck in a loop
So i connected sp flash tool and ran the 4.2.2 stock rom, but suddenly half way I got an error messasge and that was the end.
I have a black screen device on which nothing works, no logo , no charging light, no power + volume up, no power+volume up+down etc .
Not even lights,
Windows says an unidentified device detected and SP flash tool does'nt work.
Have no clue what to do , Is this the end ? or do I have to try the USB Jig / send it for Jtag repair ?
All comments & Ideas appreciated.
Thanks in advance
_____________
Hola,
I managed to resurrect my mobile, I tried Jtag to bypass the preloader by researching a lot ( thanks to my all posts china mobile website) then used SP tools to flash the stock rom ( thanks to Kalaishere XDA )
Finally its working on Jellybean.
I will soon update it and also fix the tiny issue with no imei number
Issue resolved, thread closed, thanks.
After I flash a rom, my phone wont turn on but when i plug in my charger my phone will charge.
Please help me.
Phone: ALCATEL ONE TOUCH 4030e
Rooted
Hi,
Better to revert to stock rom on your device. At least to recover a working device
Either your custom rom file were corrupted, or not for your device.
maybe my reply is out topic, my phone has got looping error , sysmtemui , acore has stopped!. I factory reset my phone but nothing happen the error are still there. I reflash my rom the error is still there.
I use Alcatel One Touch Upgrade I finish all step but nothing happen the error are still there.
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
rudycroes said:
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
Click to expand...
Click to collapse
Hello,
Please try posting your query here Ask any Query Newbie friendly with all relevant details, the experts there maybe able to assist you.
-Vatsal
Hello guys, I have a hardbricked dead galaxy s duos vietnam mtk device. I have flashed a rom not meant for it and now its hardbricked dead. I've tried alot to flash it but it wouldn't work. I can't seem to reflash it to bring it back to life. I keep getting a dram error 4302. Also when I connect it, the phone gets recognized as mediatek usb. But it disconnects every 2 seconds. I've ran out of all options to bring it back so I really need your help to get it working again. Please reply as soon as possible.
hello pls help me i bought a coolpad 8298-A01 working well with no issue so i tried to install gapps because it has none ..so i took google to get a twrp for it and i did not get any so i tried to port but got my device bricked after flashing device kept on rebooting ..now i search for the firmware online and i got it and try flashing it all Sp Flash Tool not working giving error ONLY v5.1532 that flashed it 100% but the device is not powering on nore even responding to charge only show red light when i connect to socket and system still detect it,,,please i need help
PHONE-COOLPAD_8298-A01
ANDROID VERSION - 5.1
CHIP -MT6735
RAM -2GB
ROM -8GB
THAKNS