After I flash a rom, my phone wont turn on but when i plug in my charger my phone will charge.
Please help me.
Phone: ALCATEL ONE TOUCH 4030e
Rooted
Hi,
Better to revert to stock rom on your device. At least to recover a working device
Either your custom rom file were corrupted, or not for your device.
maybe my reply is out topic, my phone has got looping error , sysmtemui , acore has stopped!. I factory reset my phone but nothing happen the error are still there. I reflash my rom the error is still there.
I use Alcatel One Touch Upgrade I finish all step but nothing happen the error are still there.
Related
I have a samsung galaxy pop GT-S5570. I installed clockworkmod rom manager. I did the flash rom manager thingy and when there was a board to select roms, I selected "Dell streak". Phone rebooted..and did not reboot.....Its not booting, nor is it showing the recharge thingy..
From what I can understnad, the original bootloader must have been replaced by the dell streak and therefore its not working.
Any way I could reset this thing?
Im having the same problem!! Help me for the solution
Hey, i've done the same thing, Im unable to boot now. Reply me what u did to recover. Help me out.
I had a massive problem with my phone suddenly as it stopped detecting the SD-card or SD-ext.
I was advised by someone on the XDA forum that to fix this I needed to ''use kdz to flash a stock rom to restore the system''.
And so I downloaded the KDZ tool, downloaded the earliest rom in kdz format that I could find online (version 2.1), and followed the process to install this using KDZ through my laptop.
However all this did was totally ruin my phone!! :'(
As now it wouldn't even start up, just showed a black screen saying Linux panic and arms 11 error.
I managed to find a rom called CM recovery rom, and when flashing one through KDZ tool it atleast doesn't show that error screen anymore,
however when trying to turn the phone on it just stops at the android boot logo and gets permanently stuck there.
My goal is to get back to the rom i was on before the phone broke (CM 4.2.1),
AND,
to have the SD-card and SD-ext both being detected and working correctly.
However currently the phone wont even turn on!! :'(
Please can someone help me by telling me exactly how to fix this please??
I am not sure what happened to my device I accidentally deleted a system file and many other files like boot and cust I don't know what I was thinking. And now my device keeps restarting and just goes into the screen where it says "Huawei Ascend Mate 7" and keeps restarting on the same scree. So I tried installing a custom rom and that didnt work, I tried to reinstall the backup I made and it kept doing the same thing I saw a thread with a ot so diffrent issue and I tried the method but it didnt work. So please Help me ASAP The advantage is that my phone bootloader is unlocked and I have CMW Recovery menu. SO if there are any methods of fixing my phone and installing the official system update please help me would really be appreciated.
My phone Is a "Mate 7" "Amber Gold" "32GB ROM" "3GB RAM" "Model-TL10"
B-Jimmy said:
I am not sure what happened to my device I accidentally deleted a system file and many other files like boot and cust I don't know what I was thinking. And now my device keeps restarting and just goes into the screen where it says "Huawei Ascend Mate 7" and keeps restarting on the same scree. So I tried installing a custom rom and that didnt work, I tried to reinstall the backup I made and it kept doing the same thing I saw a thread with a ot so diffrent issue and I tried the method but it didnt work. So please Help me ASAP The advantage is that my phone bootloader is unlocked and I have CMW Recovery menu. SO if there are any methods of fixing my phone and installing the official system update please help me would really be appreciated.
My phone Is a "Mate 7" "Amber Gold" "32GB ROM" "3GB RAM" "Model-TL10"
Click to expand...
Click to collapse
Looks like you're gonna have to flash the stock recovery and reinstall the stock firmware to get it fixed.
I had a similar problem and going back to (more or less) the phone's factory setup was the only solution.
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
rudycroes said:
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
Click to expand...
Click to collapse
Hello,
Please try posting your query here Ask any Query Newbie friendly with all relevant details, the experts there maybe able to assist you.
-Vatsal