I have a samsung galaxy pop GT-S5570. I installed clockworkmod rom manager. I did the flash rom manager thingy and when there was a board to select roms, I selected "Dell streak". Phone rebooted..and did not reboot.....Its not booting, nor is it showing the recharge thingy..
From what I can understnad, the original bootloader must have been replaced by the dell streak and therefore its not working.
Any way I could reset this thing?
Im having the same problem!! Help me for the solution
Hey, i've done the same thing, Im unable to boot now. Reply me what u did to recover. Help me out.
Related
Hey everyone,
I just got my Dell Streak 7 today and rooted it, it wasn't working right so I did a factory reset on it and now it will only boot into ClockworkMod Recovery. I tried a bunch of things but nothing seems to work.. Any ideas?
Thanks.
Just an update..
My computer can't even recognize the device, I can't mount the internal or sd card.. Even if there is a way to return it without voiding the warranty (since it only boots in clockwork) that would be appreciated..
Thanks
did you find a solution?
impulse001 said:
Just an update..
My computer can't even recognize the device, I can't mount the internal or sd card.. Even if there is a way to return it without voiding the warranty (since it only boots in clockwork) that would be appreciated..
Thanks
Click to expand...
Click to collapse
hello did you find a solution i have the same problem please help me
Lokos like you've Factory Resetted it pretty well...you erased the ROM...
Don't know what to tell you, I don't have a Dell Streak but I figured it was that just from experience.
Might be a solution, use Google.
help
i have the same problem, icant install nothing, i try adb install and pop up the error: /sbin/sh: not found, only boot in clockworkmod recovery, i install zip from sdcard, rom likes streakDroid-HD7R6-wifi-120 from DJ_Steve and others, show the message:install from sdcard complete, i reboot the system, but still show clockworkmod recovery, pleaseee help, its a dell streak 7 with android 2.2
pleasee help!!!!
Here's what happened-
I downloaded a new ROM for my x10 mini pro and i did a factory restore via CWM then i selected install zip for SD card and selected MINICM7 2.1.6 after that the installation began. I did not flash my phone. after that i got a message. Kernel nAa something like that not found and it proceeded with installation.
Then when my phone restarted It got stuck at the SE logo. I cannot get into CWM menu. or do a reset(Power + home). Then Connected my phone to my PC over the USB. it showed a unmounted drive and told me to mount it via the phone. But, I cannot do so as I can do absolutely nothing with the phone. I pulled off the battery and then connected it while pressing the back key a greed light lit up. And my phone said -"Connected to Sony ericsson phone" (without showing the model). Soon the green light disappeared by itself and my PC connection broke too. I tried several times but the same thing happened. I tired looking for SEUS for x10 mini pro- But. the SE site told me that the software wasn't available for my phone . PLZ I really need your experience and help. PLZ help. I greatly appreciate it.
shane007 said:
Here's what happened-
I downloaded a new ROM for my x10 mini pro and i did a factory restore via CWM then i selected install zip for SD card and selected MINICM7 2.1.6 after that the installation began. I did not flash my phone. after that i got a message. Kernel nAa something like that not found and it proceeded with installation.
Then when my phone restarted It got stuck at the SE logo. I cannot get into CWM menu. or do a reset(Power + home). Then Connected my phone to my PC over the USB. it showed a unmounted drive and told me to mount it via the phone. But, I cannot do so as I can do absolutely nothing with the phone. I pulled off the battery and then connected it while pressing the back key a greed light lit up. And my phone said -"Connected to Sony ericsson phone" (without showing the model). Soon the green light disappeared by itself and my PC connection broke too. I tried several times but the same thing happened. I tired looking for SEUS for x10 mini pro- But. the SE site told me that the software wasn't available for my phone . PLZ I really need your experience and help. PLZ help. I greatly appreciate it.
Click to expand...
Click to collapse
looks like you got into a bit of trouble can you get into recovery or anything
try accessing your phone through abd maybe that would help
further help
shane007 said:
Here's what happened-
I downloaded a new ROM for my x10 mini pro and i did a factory restore via CWM then i selected install zip for SD card and selected MINICM7 2.1.6 after that the installation began. I did not flash my phone. after that i got a message. Kernel nAa something like that not found and it proceeded with installation.
Then when my phone restarted It got stuck at the SE logo. I cannot get into CWM menu. or do a reset(Power + home). Then Connected my phone to my PC over the USB. it showed a unmounted drive and told me to mount it via the phone. But, I cannot do so as I can do absolutely nothing with the phone. I pulled off the battery and then connected it while pressing the back key a greed light lit up. And my phone said -"Connected to Sony ericsson phone" (without showing the model). Soon the green light disappeared by itself and my PC connection broke too. I tried several times but the same thing happened. I tired looking for SEUS for x10 mini pro- But. the SE site told me that the software wasn't available for my phone . PLZ I really need your experience and help. PLZ help. I greatly appreciate it.
Click to expand...
Click to collapse
alexyaz said:
try accessing your phone through abd maybe that would help
Click to expand...
Click to collapse
I am a new user and can't post links but Google what alexyaz said to help guide you through, search something like hot to access abd to install ROM. also if you need your original software Google search the model of your phone with stock ROM.
Once you fix it due try to read all directions a few times when implementing a new ROM to make sure you don't get any unneeded errors
Hello,
i have a big problem with my new Star S5 smartphone: I wanted to install a custom rom (i had done that before), but after installation the touchscreen didn't work. I tried some other roms, but all had the same problem, so in panic, I clicked format (system, sd-card and emmc) in the clockwork recovery, but now the phone doesn't start at all (also not in recovery mode), and worse: the phone is not recognised by my pc, so I can't use the flashtool.
So my question is: what is the simplest way to get the phone back working? I tried everything I found, but nobody had the same problem (I know, the formatting maybe was completely stupid)
Thanks in advance for any help!
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Sooo,
You probably don't have proper drivers, use PDANet ones, they work even with obscure tablets.
You tried to port CWM or flash?
It's not bricked since your computer detects it
Last thing, do you have a backup recovery image or another recovery image that works so you can get it back up?
Daniel
I was dumb enough not to do any recovery image backups..
Also.. I ported cwm then flashed it with dd just poped the .img into the recovery block.. but since I didn't compile it properly when I adb reboot recovery.. It got into a boot loop.. so I tried to fix it but broke it even more... So then I tried re-writing the firmware for generic 4.1.2 chinese tablet.. but that messed it up to the point were it only shows as M6-CHIP.. i can only turn on and off.. nothing else.. no boot no screen light up nothing..
I can help you BUT....
loureirom_ said:
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Click to expand...
Click to collapse
Even i am having the same device on its stock rom and kernel so i guess i can help you i was into rooting and upgrading it but didnt do it as i was waiting for a backup device so if i brick it i dont have to wait to buy a device but i am stupid and dont know how to take a backup of the stock rom. If you will help me know how to do that i can help you in return by uploading the stock rom and sharing the link.:highfive:
Hello all, It's been awhile since I've been on.... A big while But things have changed a lot around and looks great, But on with my question. I have a M horse N9000W MTK6572, And recently tried a sys file restore using titanium backup and the process froze with a error stating that me deviceID had changed, Then the phone proceeded to reboot, But upon booting up it just stays on the android logo. Before this problem I was able to go into factory recovery as I only had the phone rooted but no custom recovery or firmware, And now no recovery using any button combo. I have asked a few on ebay if there jig or jtag would help but they all say not on the china clone as of yet. So is my phone a cool digital android desktop picture, Or is there a method someone knows
My pc nor mac recognize the device anymore either. Thanks in advance for any info or help
Hi,
I have searched and do not find information that is helpful.
With no recovery and no recognition from the computer, I'm afraid this is a hard brick.
Sorry, I know it is not what you wanted to hear. - support for almost any clone device is scarce at best.