Hello,
i have a big problem with my new Star S5 smartphone: I wanted to install a custom rom (i had done that before), but after installation the touchscreen didn't work. I tried some other roms, but all had the same problem, so in panic, I clicked format (system, sd-card and emmc) in the clockwork recovery, but now the phone doesn't start at all (also not in recovery mode), and worse: the phone is not recognised by my pc, so I can't use the flashtool.
So my question is: what is the simplest way to get the phone back working? I tried everything I found, but nobody had the same problem (I know, the formatting maybe was completely stupid)
Thanks in advance for any help!
Related
I have a samsung galaxy pop GT-S5570. I installed clockworkmod rom manager. I did the flash rom manager thingy and when there was a board to select roms, I selected "Dell streak". Phone rebooted..and did not reboot.....Its not booting, nor is it showing the recharge thingy..
From what I can understnad, the original bootloader must have been replaced by the dell streak and therefore its not working.
Any way I could reset this thing?
Im having the same problem!! Help me for the solution
Hey, i've done the same thing, Im unable to boot now. Reply me what u did to recover. Help me out.
i deleted my ONE X OS by accident!
oh damn! i tryed to install some rom from my recovery (team win recovery project 2.3.1.0)
and i did wipe> wipe catch and then i want to do factory reset and i hit system.. and i didnt notice..
and the zip of the rom refuse to install! and i dont know what to do! please help me
i cant put another rom on my SD card.. im doomed!
and i got ONE X not XL
Use adb to push a rom or an RUU to the internal SD card..
I've deleted my OS and I can't even turn tablet on anymore!
Hello everyone! PLEASE, I need someone's help!
I have a Sanei N10 dual core. Its original OS version was 4.0.4 and I was trying to install Jelly bean into it. I had tried many ways, and the last one was using LiveSuit. I did all procedures taught in the forum. My device was connected to PC in ADB mode, and with Livesuit Open, I got a formating box from windows (the same you get when you select "format" on a storage device), so I chose format and after that, nothing else succeeded. So I disconnected the device from USB and I had to reset it. And the worse part, it didn't even turn on anymore.
I'm kinda noob in this issue, but I think when I chose format, I've formatted the partition which had the OS.
Now the Tablet doesn't give any life sign... No led, no message error, no anything "/
PLEASE, I need my Tablet back!
Thank you SO MUCH for any help
Hello since i decided to help a friend, everything got bad and I don't know why :/
Before this Tipo I rooted/unlocked Boot-loader and changed the ROM of Wildfire S, Nexus One (cyanogen ones).
Today I started to Make this "Tipo" for a friend and that's why is so important for me the phone to work its not mine ( I usually don't make my life so complicated to make someone's phone, why i did it this time).
So It was with official ROM Unrooted and with Locked Boot-loader and I checked it if its possible to
Unlock the boot-loader It was saying Yes.
I Unlocked the Boot-loader following the instructions with "Unlock SE xperia Boot-loaders 1.6" with no problem,
I know because the phone was Reset after the finish.
After that i was able to Root the phone and I had SU privileges already in the phone and
I started to put CWM.
I first Trued with RecoverX I did everything instaling Sony Pc Companion, usb debugging ,unknown sources, busy box installed(SU privilegies) and RecoverX writed me that its installed successfully.
I try to start CWM after the reboot it was not working, I try about 10 times more, it was not working so I searched another way and i found this -
For Tipo and tipo dual users-cwm_tipo_v6.zip for cwm.For TWRP-TWRP_tipo.zip
1 Unzip It using winrar or 7zip.
2 Connect you phone in usb debugging mode to pc
3 Windows users double click on install.bat.
4 Linux users use terminal to run install.sh.
It worked from the first time!
After that I put this ROM and Gapps on the SD Card
[MIRO/TIPO/J][ROM][4.1.2] Jelly Bean Mini Project Release 5
And I Went into Recovery and I Did this
Wipe Data/Factory Reset
Wipe Cache Patriotion
Advance Wipe Dalvic Cache
Install from SD Card and i find the zip archive of the ROM and the Gapps (from the ROM's directory)
I installed first the ROM after that Gapps (from Install from SD)
After that I went to Reboot System Now
(I usually don't make backup I didn't do it this time too but anyway it wont help I think in this case)
I waited the new ROM to load 10-15 Mins and I saw nothing is happening so I google the ROM and
I reeded that the ROM has sometimes that loop which is just loading for hours and nothing is happening (first boot)
So i took the battery off and I trued to go into Recovery, Sadly the recovery is gone ;(
I trued around 20 times to enter recovery with no success
And now I don't know if I'm able to do something ;( No Recovery No ROM The ROM is already above 1 hour loading
Please somebody to help me with something, or at least to tell me its no point there is nothing I can do
and to look how to buy a new phone for my friend
Try SEUS...!
Simlo said:
Hello since i decided to help a friend, everything got bad and I don't know why :/
Before this Tipo I rooted/unlocked Boot-loader and changed the ROM of Wildfire S, Nexus One (cyanogen ones).
Today I started to Make this "Tipo" for a friend and that's why is so important for me the phone to work its not mine ( I usually don't make my life so complicated to make someone's phone, why i did it this time).
So It was with official ROM Unrooted and with Locked Boot-loader and I checked it if its possible to
Unlock the boot-loader It was saying Yes.
I Unlocked the Boot-loader following the instructions with "Unlock SE xperia Boot-loaders 1.6" with no problem,
I know because the phone was Reset after the finish.
After that i was able to Root the phone and I had SU privileges already in the phone and
I started to put CWM.
I first Trued with RecoverX I did everything instaling Sony Pc Companion, usb debugging ,unknown sources, busy box installed(SU privilegies) and RecoverX writed me that its installed successfully.
I try to start CWM after the reboot it was not working, I try about 10 times more, it was not working so I searched another way and i found this -
For Tipo and tipo dual users-cwm_tipo_v6.zip for cwm.For TWRP-TWRP_tipo.zip
1 Unzip It using winrar or 7zip.
2 Connect you phone in usb debugging mode to pc
3 Windows users double click on install.bat.
4 Linux users use terminal to run install.sh.
It worked from the first time!
After that I put this ROM and Gapps on the SD Card
[MIRO/TIPO/J][ROM][4.1.2] Jelly Bean Mini Project Release 5
And I Went into Recovery and I Did this
Wipe Data/Factory Reset
Wipe Cache Patriotion
Advance Wipe Dalvic Cache
Install from SD Card and i find the zip archive of the ROM and the Gapps (from the ROM's directory)
I installed first the ROM after that Gapps (from Install from SD)
After that I went to Reboot System Now
(I usually don't make backup I didn't do it this time too but anyway it wont help I think in this case)
I waited the new ROM to load 10-15 Mins and I saw nothing is happening so I google the ROM and
I reeded that the ROM has sometimes that loop which is just loading for hours and nothing is happening (first boot)
So i took the battery off and I trued to go into Recovery, Sadly the recovery is gone ;(
I trued around 20 times to enter recovery with no success
And now I don't know if I'm able to do something ;( No Recovery No ROM The ROM is already above 1 hour loading
Please somebody to help me with something, or at least to tell me its no point there is nothing I can do
and to look how to buy a new phone for my friend
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=1849170
it has solution to all types of bricked xperia devices.
or
Ever heard about SEUS (Sony Ericsson Update Service) which is used to recover the device back to stock. you can download it in sony website just google it which is named as Update service.
it can help you to unbrick your device.... Try it..:good::good::laugh:
Hit thanks if i helped you..
Recovered
The phone was recovered by Flashtool with a bit problems and difficulties, but its now with sock firmware and working better than, before!
It was the first and the last time I'm flashing phone which is not mine.
Many thanks gulabsameer I hit thanks for u and for the tread u send me to.
Once more many many thanks!
Thats great...!
Simlo said:
The phone was recovered by Flashtool with a bit problems and difficulties, but its now with sock firmware and working better than, before!
It was the first and the last time I'm flashing phone which is not mine.
Many thanks gulabsameer I hit thanks for u and for the tread u send me to.
Once more many many thanks!
Click to expand...
Click to collapse
Thats great. I'm happy that you unbricked your friends device..!
Enjoy..!
Hello everyone,
Today I (tried to) flash a new custom ROM on my falcon.
This wasn't the first time I flashed a custom ROM, but this time it went wrong.
To start with, I accidently took a Android 4.4.2 custom ROM (link: http://forum.xda-developers.com/showthread.php?t=2756571 v.0.3), but using a Android 5.x bootloader.
It flashed correctly and also booted just fine, until I got a message stating that I should enter a password to decrypt storage. My previous custom ROM was Paranoid Android 5.1 and I indeed encrypted my storage (something that I will never do again), but if I insert the password used in Paranoid Android it says 'try again'.
I searched xda-developers and some said to delete cache and user data, so that is what I did (using Cyanogen Recovery).
But deleting user data and clearing the cache didn't work. I now no longer have USB-debugging enabled and my laptop is not recognizing my phone.
I also tried ADB, but it isn't recognizing it etc.
After like 4 hours of trying and looking at forums, I am getting hopeless.
Anyone encountered this problem too (and solved it perhaps)?
I would be really greatful to get my phone working again, I have downloaded the previous ROM I had on my laptop, so I can flash it on phone once I have a solution.
For now, texting on a stone-age Samsung phone without WiFi or touch So I need help ASAP
Thanks!
Feronium
Does the pc recognize the device while in fastboot?
(I'm not sure if this is the right place to post this, so if any moderator has to move it sorry and thx you in advance).
Basically I was changing the ROM on my phone (Lg g2 d802) to CM13 (cm-13.0-20160127-NIGHTLY-d802), I’ve already done the rooting and installed the Recovery (twrp), but only place on the internal memory the new system. Apparently when you came from a 4.4.2 (KitKat) you have to place also a Bootloader zip.
My current situation is I have wipe everything (expect internal memory ) , haven’t done back up ( I know , I’m an anxious idiot) and flashed the new system which doesn't start. (The recovery twrp , works perfectly)
My problem is that when I connect the phone to the PC if it is in recovery it doesn’t recognize the internal memory. And if I plug it power off or in download mode it recognize just a 63mb drive and tell me I have to format like 6 other "hard drives" .
To sum up does anyone knows how to place the bootloader on the internal memory or has any ideas?
Well return too stock rom, dont do much experiments download lg flash tool, and tot.