(I'm not sure if this is the right place to post this, so if any moderator has to move it sorry and thx you in advance).
Basically I was changing the ROM on my phone (Lg g2 d802) to CM13 (cm-13.0-20160127-NIGHTLY-d802), I’ve already done the rooting and installed the Recovery (twrp), but only place on the internal memory the new system. Apparently when you came from a 4.4.2 (KitKat) you have to place also a Bootloader zip.
My current situation is I have wipe everything (expect internal memory ) , haven’t done back up ( I know , I’m an anxious idiot) and flashed the new system which doesn't start. (The recovery twrp , works perfectly)
My problem is that when I connect the phone to the PC if it is in recovery it doesn’t recognize the internal memory. And if I plug it power off or in download mode it recognize just a 63mb drive and tell me I have to format like 6 other "hard drives" .
To sum up does anyone knows how to place the bootloader on the internal memory or has any ideas?
Well return too stock rom, dont do much experiments download lg flash tool, and tot.
Related
i deleted my ONE X OS by accident!
oh damn! i tryed to install some rom from my recovery (team win recovery project 2.3.1.0)
and i did wipe> wipe catch and then i want to do factory reset and i hit system.. and i didnt notice..
and the zip of the rom refuse to install! and i dont know what to do! please help me
i cant put another rom on my SD card.. im doomed!
and i got ONE X not XL
Use adb to push a rom or an RUU to the internal SD card..
I've deleted my OS and I can't even turn tablet on anymore!
Hello everyone! PLEASE, I need someone's help!
I have a Sanei N10 dual core. Its original OS version was 4.0.4 and I was trying to install Jelly bean into it. I had tried many ways, and the last one was using LiveSuit. I did all procedures taught in the forum. My device was connected to PC in ADB mode, and with Livesuit Open, I got a formating box from windows (the same you get when you select "format" on a storage device), so I chose format and after that, nothing else succeeded. So I disconnected the device from USB and I had to reset it. And the worse part, it didn't even turn on anymore.
I'm kinda noob in this issue, but I think when I chose format, I've formatted the partition which had the OS.
Now the Tablet doesn't give any life sign... No led, no message error, no anything "/
PLEASE, I need my Tablet back!
Thank you SO MUCH for any help
Hello,
i have a big problem with my new Star S5 smartphone: I wanted to install a custom rom (i had done that before), but after installation the touchscreen didn't work. I tried some other roms, but all had the same problem, so in panic, I clicked format (system, sd-card and emmc) in the clockwork recovery, but now the phone doesn't start at all (also not in recovery mode), and worse: the phone is not recognised by my pc, so I can't use the flashtool.
So my question is: what is the simplest way to get the phone back working? I tried everything I found, but nobody had the same problem (I know, the formatting maybe was completely stupid)
Thanks in advance for any help!
Hello guys,
I am in a really difficult situation here and i really need your help,
I am the owner of a Lenovo Vibe shot Z90a40. This phone had initially a chinese rom so i flashed a s240 ROW rom without any problems and it was just fine. Yesterday i found that there was an android 6 update (OTA) so i choosed YES (bad choice). The rom was downloaded, installed and when the phone rebooted it turned of by itself.
I powered it on again, stays in initial screen for 1 sec then vibrates for 2-3 secs and it shutdowns again.
So i tried to flash the previous rom again FAIL
the internal storage says write protected so flash (with Miflash generate a write protect error), i cannot access adb because the phone doesn't boot, cant use the sdfuse method (update from internal storage) because i cannot write anything to internal memmory and when i try to update through sd at about 50% says update fail.
I have tried every rom availiable no luck. I can see the internal partitions on my pc but can't access them.
Basically the problem is the write protection on internal storage.
I would really apreciate any advice,
Thanks in advance
Jimakosk said:
Hello guys,
I am in a really difficult situation here and i really need your help,
I am the owner of a Lenovo Vibe shot Z90a40. This phone had initially a chinese rom so i flashed a s240 ROW rom without any problems and it was just fine. Yesterday i found that there was an android 6 update (OTA) so i choosed YES (bad choice). The rom was downloaded, installed and when the phone rebooted it turned of by itself.
I powered it on again, stays in initial screen for 1 sec then vibrates for 2-3 secs and it shutdowns again.
So i tried to flash the previous rom again FAIL
the internal storage says write protected so flash (with Miflash generate a write protect error), i cannot access adb because the phone doesn't boot, cant use the sdfuse method (update from internal storage) because i cannot write anything to internal memmory and when i try to update through sd at about 50% says update fail.
I have tried every rom availiable no luck. I can see the internal partitions on my pc but can't access them.
Basically the problem is the write protection on internal storage.
I would really apreciate any advice,
Thanks in advance
Click to expand...
Click to collapse
Hi,
I couldn't find much information about your device here except this thread
Lenovo Z90-7 (VIBE SHOT) - International (ROW) ROM, multilanguage, GAPPS
Try posting your query there. Experts there may be able to assist you.
Good luck
Art Vanderlay
XDA Assist
Hi guys,
I read a lot of your wise threads while trying to save my phone but unfortunately I didn't find an answer.
I tried to upgrade my LG G2 mini (D620R) from official stock ROM 4.4.2 to official stock ROM 5.0.2 using the LG flash tool (phone is unrooted).
At the end of the upgrade I got stuck in bootloop. Maybe b/c I chose "normal flash".
1) The stock recovery mode only offers me a factory reset - It didn't help.
2) I'm not able to go into download mode.
3) The computer doesn't recognize the phone. It recognizes it as a USB power device.
4) Even tried ADB, but it doesn't see the phone.
Do you have any suggestions?
Maybe the bad flash damaged the memory hardware?
Thank you very much for all of your help.
Bro, plz ask for ur problem in this forum :-
forum.xda-developers.com/g2-mini
HELP!! im new to this forum so didnt know where to ask question.
i have Huawei Mediapad T1-701ua Android Kitkat , i have rooted it with kingroot, i installed ChainFire 3D without knowing much and it caused a bootloop and the device is not booting. i wen into recovery mode(i onlt have stock recovery) and did a factory reset but still the device is not booting please help!!! also my usb debugging mode is turned off
please help!!! im desperate :crying: :crying:
Solved
Okay I'm just going to leave it here incase someone messed up like me. Firstly never turn off USB debugging mode or you'll be stuck. But you don't need to throw away your device. If you get stuck on bootloop after installing chsinfire 3d and can't do anything do this:-
Search on your device's customer service website for your firmware update. Chose the latest version and download it.
Unzip the file and copy the "dload" folder into an empty SD card.
Put the SD card in the device,and go to recovery mode(I only had stock recovery)
Select update from SD card and make sure your device is charged.
You'll lose everything, but hey! At least you got your device back.
:fingers-crossed:
Also never forget to backup before doing any dumb stuff :laugh: