HELP!! im new to this forum so didnt know where to ask question.
i have Huawei Mediapad T1-701ua Android Kitkat , i have rooted it with kingroot, i installed ChainFire 3D without knowing much and it caused a bootloop and the device is not booting. i wen into recovery mode(i onlt have stock recovery) and did a factory reset but still the device is not booting please help!!! also my usb debugging mode is turned off
please help!!! im desperate :crying: :crying:
Solved
Okay I'm just going to leave it here incase someone messed up like me. Firstly never turn off USB debugging mode or you'll be stuck. But you don't need to throw away your device. If you get stuck on bootloop after installing chsinfire 3d and can't do anything do this:-
Search on your device's customer service website for your firmware update. Chose the latest version and download it.
Unzip the file and copy the "dload" folder into an empty SD card.
Put the SD card in the device,and go to recovery mode(I only had stock recovery)
Select update from SD card and make sure your device is charged.
You'll lose everything, but hey! At least you got your device back.
:fingers-crossed:
Also never forget to backup before doing any dumb stuff :laugh:
Related
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Sooo,
You probably don't have proper drivers, use PDANet ones, they work even with obscure tablets.
You tried to port CWM or flash?
It's not bricked since your computer detects it
Last thing, do you have a backup recovery image or another recovery image that works so you can get it back up?
Daniel
I was dumb enough not to do any recovery image backups..
Also.. I ported cwm then flashed it with dd just poped the .img into the recovery block.. but since I didn't compile it properly when I adb reboot recovery.. It got into a boot loop.. so I tried to fix it but broke it even more... So then I tried re-writing the firmware for generic 4.1.2 chinese tablet.. but that messed it up to the point were it only shows as M6-CHIP.. i can only turn on and off.. nothing else.. no boot no screen light up nothing..
I can help you BUT....
loureirom_ said:
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Click to expand...
Click to collapse
Even i am having the same device on its stock rom and kernel so i guess i can help you i was into rooting and upgrading it but didnt do it as i was waiting for a backup device so if i brick it i dont have to wait to buy a device but i am stupid and dont know how to take a backup of the stock rom. If you will help me know how to do that i can help you in return by uploading the stock rom and sharing the link.:highfive:
Any roms available for this phone???
It says "Unfortunately, Phone has Stopped Working"
I tried a factory reset and the situation became worse.
Now I cant even access my phone as the pop up keeps coming up.
So i cant turn on usb debugging.
Please tell me how to flash a rom in this case.
I have never flashed any rom before.
Any help would be appreciated.
:crying: :crying: :crying:
Please reinstall software check www.hihonor.com/in and download official software in your system and extract the file in dload folder you need to create this and copy in sd card and then go to recovery mode and install the software
i've edited build.prop for adding multiuser on my mito a260, then i restart it..
it is bootlooped now
here is the situation
mito a260+ stock rom
stock kernel
rooted with SU on it
Running on lollipop
I wish not to lose my datas
can access to computer, but USB couldnt recognize it.
it is stuck on logo,not restarting or anything. n everytime i try to switch off, it turned on again by automatic.
please help, i need this phone for my work.
thx in advance
XDA Visitor said:
i've edited build.prop for adding multiuser on my mito a260, then i restart it..
it is bootlooped now
here is the situation
mito a260+ stock rom
stock kernel
rooted with SU on it
Running on lollipop
I wish not to lose my datas
can access to computer, but USB couldnt recognize it.
it is stuck on logo,not restarting or anything. n everytime i try to switch off, it turned on again by automatic.
please help, i need this phone for my work.
thx in advance
Click to expand...
Click to collapse
Hello, and welcome to XDA!
I see you have made it to the location I was going to suggest:
http://forum.xda-developers.com/showpost.php?p=63315776&postcount=12473
Unfortunately it is getting buried fast. I looked at that post as well. If you cannot authorize yourself to mount system and push the right file back via stock recovery (something that you can rarely do anyway), sadly you have too few options.
Only thing you can do is try to find a fastboot image to reflash system, if your device supports fastboot that is (alternatively, if you have download mode, an image for that). But for a rare device, you would end up having to deal with the manufacturer anyway, so your best bet may be getting it repaired by them.
Sorry, but I hope that helps.
Hey Guys......
Ive got a bad news...... Nd i need help..... ASAP..
Actually long story short- I Bricked my gt i9003 (Galaxy sL) :'(
Long story- This new rom came out recently called Omnirom 14.1 for the gt-i9003
And so i got pretty excited nd tried to install it....
Previously i was on cm 10.1 nd cwm (cant remember the version)
So after i installed it the usual way, As i thought it didnt work..... It got stuck at the logo...
So when i tried to get into recovery The recovery changed from cwm to twrp(maybe bcoz of the rom i guess)
From this twrp i tried to flash another rom called Nameless rom (the lollipop version one)
Then after i booted the phone, the phone didnt even give me the ROm's logo this time.....
So then i tried to install cwm from twrp so that i can recover from the backup which i made before...
ND guess wut.... Instead the phone now completely does'nt go into NORMAL BOOT MODE, RECOVERY MODE...... but DOWNLOAD MODE is still available.....
Whenever i try to go into recovery or boot mode it shows a PHONE-EXCLAMATION-COMPUTER symbol (I'll post the pics below).....
I searched for the treatment for it Nd found out that it was just soft bricked nd I just needed to flash a custom rom.....When i tried that with the download mode nd ODIN it was'nt successful....
Instead in odin it shows (SUCCESSFUL 0/FAILED 1)...
I tried everything from flashing the KPE and to flashing the custom rom, but i do'nt seem to find any progress...
Nd one more important thing...... When i connect my phone to pc with usb, It normally shows both internal storage nd sd card storages...... But now it shows sd card nd instead of int. storage it shows some folder called Cache...... wtf is that?? did i damage my internal storage??:crying::crying:
Im in DIRE NEED OF HELP so plssss....... plss REPLY if u know ANYTHING abt this situation....
I appreciate aNY kind of help....
I hope that someone will come to rescue me........Nd the one will be my HERO!:angel:
P.S. sorry fr bad english.... (typing while worrying abt mah phone)
hey guys,
in attempt to root my device mate 9, i accidentally wiped entire system instead of wiping data only. when i tried to flash a new rom the bootloader got locked as well(my pc had got stuck when in process) and now there is no recovery, pc doesnt recognize the device either. huawei erecovery doesnt help also. should i drop it from 15 floors in frustration or is there hope? urgent help plz
tz4395 said:
hey guys,
in attempt to root my device mate 9, i accidentally wiped entire system instead of wiping data only. when i tried to flash a new rom the bootloader got locked as well(my pc had got stuck when in process) and now there is no recovery, pc doesnt recognize the device either. huawei erecovery doesnt help also. should i drop it from 15 floors in frustration or is there hope? urgent help plz
Click to expand...
Click to collapse
the same with me but my phone recognized by pc
and tried to but the 3 zip file in internal storage and then recover vol + and - and power but not run
do you now any way ??
Jus take help from any site for detailed steps... u r safe as long as pc recognizes your device
don't worry