i've edited build.prop for adding multiuser on my mito a260, then i restart it..
it is bootlooped now
here is the situation
mito a260+ stock rom
stock kernel
rooted with SU on it
Running on lollipop
I wish not to lose my datas
can access to computer, but USB couldnt recognize it.
it is stuck on logo,not restarting or anything. n everytime i try to switch off, it turned on again by automatic.
please help, i need this phone for my work.
thx in advance
XDA Visitor said:
i've edited build.prop for adding multiuser on my mito a260, then i restart it..
it is bootlooped now
here is the situation
mito a260+ stock rom
stock kernel
rooted with SU on it
Running on lollipop
I wish not to lose my datas
can access to computer, but USB couldnt recognize it.
it is stuck on logo,not restarting or anything. n everytime i try to switch off, it turned on again by automatic.
please help, i need this phone for my work.
thx in advance
Click to expand...
Click to collapse
Hello, and welcome to XDA!
I see you have made it to the location I was going to suggest:
http://forum.xda-developers.com/showpost.php?p=63315776&postcount=12473
Unfortunately it is getting buried fast. I looked at that post as well. If you cannot authorize yourself to mount system and push the right file back via stock recovery (something that you can rarely do anyway), sadly you have too few options.
Only thing you can do is try to find a fastboot image to reflash system, if your device supports fastboot that is (alternatively, if you have download mode, an image for that). But for a rare device, you would end up having to deal with the manufacturer anyway, so your best bet may be getting it repaired by them.
Sorry, but I hope that helps.
Related
Hi everyone!
I need, please help with a Chinese phone I just bought.
Some information about the phone:
MC603CH, board cellonsz73_gb, MT6573 ARMv6 797.90mhz, MC7305.zheng.V1.en display, brand Yusu, total 214 Mb RAM, 130 Mb internal space, external 3.7 Gb, Imagination Technologies GPU, OpenGL ES 2.0, currently running Android 2.3. 5 Kernel 2.6.35.7.
In Windows 8 on Mac and was recognized as HTC (Windows as My HTC). Turns out I can not stand just looking for that kind of device without having the urge to start moving in everything and in every way (especially since it's my first Android). I did root, installed a bunch of app to change the system and found a script that makes the Apps recognize a partition EXT4 like to have more internal space to install applications. The last two things I did while he was connected were able to install BusyBox to make the system recognize the init.de folder so I can run scripts in the beginning of the section and, silly me, make a run in the script.
He was pretty one, running everything is fast with the ROM that was running, which it came (modified to look like iOS), but after running the script, it restarted and went into boot loop. Then I try to recover the poor, and went hunting for information ... flash rom did (I was afraid to try installing and kill him at once), then I found a video that said I could try clearing the cache, I tried, I removed the USB cable from the computer to wait for the battery dies (it does not restart the button is in loop) and nothing.
I found another video that told me to go back to factory settings purchases that could go right.
The problem is I can not get into recovery mode by buttons (already tried all possible combinations and does not enter the recovery). I managed, after Google searches, and find the adb installed, managed to make it into the recovery by adb! Then I thought I could do everything that was needed to revive the pet. I fell to the tale of the factory settings, and I gave myself badly. Now the adb condegue not recognize the phone, I believe it is because he is no longer on usb debuging (factory settings), so now I'm here at all in the stirring cell, trying to find a way to disconnect the battery and do not think (believe only a technician can or someone with technical knowledge) so I can try some procedures using software I found (SP flash tools, tools mtkdroid, Android AIO flasher, etc.). To get drivers that worked in Portcom has been very difficult, I tried several until you find what the Windows install left. Well, it's more or less what is happening to me. I hope you can find someone to help me on this, because, as I said, it's my first android and I can not buy another one for a long time (I have a wife and four children, i can not spend too much ) and it cost me R$ 590.00 (Brazil) and not just pay. If anyone can help me, I am very grateful.
God bless you. Sorry for english from Google Translator.
Hej,
If you just can get into the recovery you could flash any rom made for your phone, just get the zip on your SD card and install through recovery.
Try to get into recovery through fastboot if your phone is supported and next time you root your android just do a nandroid backup.
dR.BaNaNe said:
Hej,
If you just can get into the recovery you could flash any rom made for your phone, just get the zip on your SD card and install through recovery.
Try to get into recovery through fastboot if your phone is supported and next time you root your android just do a nandroid backup.
Click to expand...
Click to collapse
Hi Dr.Banane! Thanks for responding!
The point is that I can not go into recovery mode at all the buttons on this phone.
The only ways in which I saw the screen of recovery mode this cell were: 1 by 2 by adb root manager when
I was with usb debugging enabled. I need to figure out exactly how to enter the recovery mode, because I think it
I will be able to access adb again and be able to delete the folder init.d script or do some flash ROM.
By the way, does the ROM Sophone MT6575 will work on it or kill it once?
Thank you. God bless you.
learned alot from your question
Wppley said:
Hi Dr.Banane! Thanks for responding!
The point is that I can not go into recovery mode at all the buttons on this phone.
The only ways in which I saw the screen of recovery mode this cell were: 1 by 2 by adb root manager when
I was with usb debugging enabled. I need to figure out exactly how to enter the recovery mode, because I think it
I will be able to access adb again and be able to delete the folder init.d script or do some flash ROM.
By the way, does the ROM Sophone MT6575 will work on it or kill it once?
Thank you. God bless you.
Click to expand...
Click to collapse
Look at this and maybe it will help you:
http://forum.xda-developers.com/showthread.php?t=1929957
You have to flash a recovery.img and boot.img with computer but i don´t know if it´s possible without USB-debugging OFF, but atleast you can try.
dR.BaNaNe said:
Look at this and maybe it will help you:
http://forum.xda-developers.com/showthread.php?t=1929957
You have to flash a recovery.img and boot.img with computer but i don´t know if it´s possible without USB-debugging OFF, but atleast you can try.
Click to expand...
Click to collapse
Ok, thanks Dr. I will try this.
Please tell me someone knows a way to get into recovery mode?
Edit: I think i found the model of my phone: Sophone 4s v5 or Gooapple v5, I'm not sure.
Thanks.
God bless you.
Sorry for flood, but anybody can help me please? Think i loose my recovery. What can i do? Please!
Thanks,
Edit 16 02 13: I have in my hands another one cell ecxately same of mine, but im not able to get a backup of their rom, please help me, im almost in the goal!
Thanks. God bless you.
Edit 17 02 13: I would like to thank Dr. Banane and all the help that friends here from XDA have done to help me.
Thank God I managed to grab the rom from a device identical to mine and restore my Android. I learned a lot in those days I tried and tried and could help in forums with this topic: http://forum.xda-developers.com/showthread.php?t=1683883.
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Sooo,
You probably don't have proper drivers, use PDANet ones, they work even with obscure tablets.
You tried to port CWM or flash?
It's not bricked since your computer detects it
Last thing, do you have a backup recovery image or another recovery image that works so you can get it back up?
Daniel
I was dumb enough not to do any recovery image backups..
Also.. I ported cwm then flashed it with dd just poped the .img into the recovery block.. but since I didn't compile it properly when I adb reboot recovery.. It got into a boot loop.. so I tried to fix it but broke it even more... So then I tried re-writing the firmware for generic 4.1.2 chinese tablet.. but that messed it up to the point were it only shows as M6-CHIP.. i can only turn on and off.. nothing else.. no boot no screen light up nothing..
I can help you BUT....
loureirom_ said:
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Click to expand...
Click to collapse
Even i am having the same device on its stock rom and kernel so i guess i can help you i was into rooting and upgrading it but didnt do it as i was waiting for a backup device so if i brick it i dont have to wait to buy a device but i am stupid and dont know how to take a backup of the stock rom. If you will help me know how to do that i can help you in return by uploading the stock rom and sharing the link.:highfive:
Hello everyone, i'm new here so..sorry if i post this in a different place, but anyways..
i'm using Infocus M2 4g, i'm really happy with it, but yesterday i decided to install an android 5.0.2 custom ROM, maybe i forgot to wipe cache and make a factory reset before installing it, now my phone works till the welcome page, and the screen touch isn't working, and whenever the screen turns off, the device reboots again and keeps doing it over and over, i don't have a custom recovery, i flashed the ROM by a tool called DinDong and it requires usb debugging so that i can install a different ROM, and get rid of the problem, i can get to the fastboot screen, but i can't flash a room trough that :/
so this means .. NO Custom Recovery, No USB debugging, .. nothing :crying:
i would really appreciate it if you guys could help me, i have so many friends that i want to talk to again on whatsapp, and i don't want to use bluestacks again i need to get back my phone working,
thank you so much for reading this, and please reply as soon as possible)
and sorry for my English
Warlock-idlaasri said:
Hello everyone, i'm new here so..sorry if i post this in a different place, but anyways..
i'm using Infocus M2 4g, i'm really happy with it, but yesterday i decided to install an android 5.0.2 custom ROM, maybe i forgot to wipe cache and make a factory reset before installing it, now my phone works till the welcome page, and the screen touch isn't working, and whenever the screen turns off, the device reboots again and keeps doing it over and over, i don't have a custom recovery, i flashed the ROM by a tool called DinDong and it requires usb debugging so that i can install a different ROM, and get rid of the problem, i can get to the fastboot screen, but i can't flash a room trough that :/
so this means .. NO Custom Recovery, No USB debugging, .. nothing :crying:
i would really appreciate it if you guys could help me, i have so many friends that i want to talk to again on whatsapp, and i don't want to use bluestacks again i need to get back my phone working,
thank you so much for reading this, and please reply as soon as possible)
and sorry for my English
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Try to head over here
Good luck!
So i wanted to root my Wileyfox swift, i got the zip and installed it.... the bootloop/stuck at boot.
So i tried resetting, reinstalling, etc. etc....
The i wanted to reinstall the os from cyanogenmod website, so on and so on. Needed to do it with zip file but my recovery wouldn't open zip from sd, and i couldn't get it on main storage. So i try to install cwmr and some other recovery via fastboot, but the only thing that gets me is that the bad but working recovery i had installed stops working or gets deleted or something.....
So i try every guide on the internet to install cyanogen, recovery, and other stuff. but with no luck. Then i find this guide:
community.cyngn.com/t/wileyfox-swift-update-gone-totally-wrong-partially-to-phone-and-incompetent-owner/1132/2
and i do everything it says. Type: Fastboot reboot
aaand my phone stops working... my pc makes the "connected " sound when i plug in in usb. but hte notification lights are out, and the screen is out... also when charging..
So smart people at xda forums what do i do?
note that the phone was bought from amazon.co.uk and i am from denmark so i don't think i can get a repair from there.... plz help!
BenTheWizzard said:
So i wanted to root my Wileyfox swift, i got the zip and installed it.... the bootloop/stuck at boot.
So i tried resetting, reinstalling, etc. etc....
The i wanted to reinstall the os from cyanogenmod website, so on and so on. Needed to do it with zip file but my recovery wouldn't open zip from sd, and i couldn't get it on main storage. So i try to install cwmr and some other recovery via fastboot, but the only thing that gets me is that the bad but working recovery i had installed stops working or gets deleted or something.....
So i try every guide on the internet to install cyanogen, recovery, and other stuff. but with no luck. Then i find this guide:
community.cyngn.com/t/wileyfox-swift-update-gone-totally-wrong-partially-to-phone-and-incompetent-owner/1132/2
and i do everything it says. Type: Fastboot reboot
aaand my phone stops working... my pc makes the "connected " sound when i plug in in usb. but hte notification lights are out, and the screen is out... also when charging..
So smart people at xda forums what do i do?
note that the phone was bought from amazon.co.uk and i am from denmark so i don't think i can get a repair from there.... plz help!
Click to expand...
Click to collapse
Greetings and welcome to xda. I am not familiar with your device but we do have a dedicated forum for it here
http://forum.xda-developers.com/wileyfox-swift
there should be plenty of experts there to help you. I did find this thread though that seems quite relevant to your issue
http://forum.xda-developers.com/wileyfox-swift/help/bricked-swift-pls-help-t3289530
Good Luck
Sawdoctor
HELP!! im new to this forum so didnt know where to ask question.
i have Huawei Mediapad T1-701ua Android Kitkat , i have rooted it with kingroot, i installed ChainFire 3D without knowing much and it caused a bootloop and the device is not booting. i wen into recovery mode(i onlt have stock recovery) and did a factory reset but still the device is not booting please help!!! also my usb debugging mode is turned off
please help!!! im desperate :crying: :crying:
Solved
Okay I'm just going to leave it here incase someone messed up like me. Firstly never turn off USB debugging mode or you'll be stuck. But you don't need to throw away your device. If you get stuck on bootloop after installing chsinfire 3d and can't do anything do this:-
Search on your device's customer service website for your firmware update. Chose the latest version and download it.
Unzip the file and copy the "dload" folder into an empty SD card.
Put the SD card in the device,and go to recovery mode(I only had stock recovery)
Select update from SD card and make sure your device is charged.
You'll lose everything, but hey! At least you got your device back.
:fingers-crossed:
Also never forget to backup before doing any dumb stuff :laugh: