I had a massive problem with my phone suddenly as it stopped detecting the SD-card or SD-ext.
I was advised by someone on the XDA forum that to fix this I needed to ''use kdz to flash a stock rom to restore the system''.
And so I downloaded the KDZ tool, downloaded the earliest rom in kdz format that I could find online (version 2.1), and followed the process to install this using KDZ through my laptop.
However all this did was totally ruin my phone!! :'(
As now it wouldn't even start up, just showed a black screen saying Linux panic and arms 11 error.
I managed to find a rom called CM recovery rom, and when flashing one through KDZ tool it atleast doesn't show that error screen anymore,
however when trying to turn the phone on it just stops at the android boot logo and gets permanently stuck there.
My goal is to get back to the rom i was on before the phone broke (CM 4.2.1),
AND,
to have the SD-card and SD-ext both being detected and working correctly.
However currently the phone wont even turn on!! :'(
Please can someone help me by telling me exactly how to fix this please??
Related
Hello,
Recently,I tried to flash my LG GT540 CyanOgen 7 to different ROM..As for the new ROM,I needed a Android 2.1,Which I downloaded and reflashed the phone using KDZ Updater,and the phone was always stuck on boot images,so I tried it several times then my phone died..
It Does not wants to start in Download Mode,Fastboot mode neither Recovery Mode...
I tried everything,KDZ Updater tells that it cant find the phone,LG Updater cannot find the phone either..
Can someone help me ?
What should I do?
After I flash a rom, my phone wont turn on but when i plug in my charger my phone will charge.
Please help me.
Phone: ALCATEL ONE TOUCH 4030e
Rooted
Hi,
Better to revert to stock rom on your device. At least to recover a working device
Either your custom rom file were corrupted, or not for your device.
maybe my reply is out topic, my phone has got looping error , sysmtemui , acore has stopped!. I factory reset my phone but nothing happen the error are still there. I reflash my rom the error is still there.
I use Alcatel One Touch Upgrade I finish all step but nothing happen the error are still there.
Hi all,
I tried all methods which mentioned in #hyelton guide but its still going in boot loop
method 1 ) In LG flash tool if i use upgrade DL its stopping at 94% and going to bootloop
Method 2) In LG flash tool I choosed Board DL its stopping at 89% and going boot loop
Method3) I used LGUP tool its showing 100% but going into boot loop
Note:-I can go to download mode
Initially I was in stock firware 4.4.2 due to some online browsing mobile hanged and was bootlooping so as I was interested to moved to latest android Marshmallow I tried by rooting and installing CM13 when my mobile turned up once but it failed while installing CM13 so I was trying back to stock firmware but its going into bootloop.
Is it a hardware issue as all software methods are not working please help if any idea.
I guess I have tried installing 50-70 times not sure if it effects hardware.
If there is no option then I need to go to new mobile
Thanks,
Prashant
My LG v10 stuck on LG Logo, but when I attach an USB cable with computer it further goes to att logo and after 3 or 4 spins, it again stuck on att logo. I can get into download mod but not recovery or safe mod. I tried to flash my phone with LGUP but it shoes unknown model. tried with upper cut and common folder options but no luck. LG flash toll 2014 does not detect my phone and application stop responding when I try to read phone information. tried on different computers, different USB cables and different windows but the result is same. Once I had a LG f350 and faced the same problem. Only LG Flash tool 1.8 worked for my LG F350. I am hope full it may work for my LG H900 but I can't find TOT+dll file for LG H900 nowhere. Any one can help please.
I was on 5.1.1. rooted, Super SU and busy box installed when I tried to factory reset my phone and got into this trouble.
More Problems
I got a LG Firmware Extractor from a post on XDA. Extracted the KDZ file and got a .dz and .dll file. extractor also showing another file (something like .dllyib i think) but I ignored that and extracted what I needed. After that I flashed my phone with lg flash tool 1.8.. but flash tool kept on installing system file after 100% but my phone was stuck on 99%. After 117 % flash tool showed "waiting for connection" and then failed. I tried to reflash and got the same result. Now after showing LG screen, my phone got stuck on a black screen showing some bars going up and text "MiniOS" and stuck on this screen. I searched for the solution and some one told me to disconnect phone when flashing reached at 99% and then reattach it after changing the port. I did that but what I got was worse than before. :crying: Now I can get into recovery screen but after applying factory reset, phone goes off and restart again without doing any thing. My phone is stuck on boot loop at LG Logo. it keep booting when i connect to a charger or my computer . I cant get into download mod now. when I try to get into download mod, the screen with some dots appear and then phone restart again without going into download mod. when I connect my phone to PC it only do boot looping and nothing appear on my computer. My phone does not appear in device manager. Is there anything I can do now????????
Shahidessa said:
I got a LG Firmware Extractor from a post on XDA. Extracted the KDZ file and got a .dz and .dll file. extractor also showing another file (something like .dllyib i think) but I ignored that and extracted what I needed. After that I flashed my phone with lg flash tool 1.8.. but flash tool kept on installing system file after 100% but my phone was stuck on 99%. After 117 % flash tool showed "waiting for connection" and then failed. I tried to reflash and got the same result. Now after showing LG screen, my phone got stuck on a black screen showing some bars going up and text "MiniOS" and stuck on this screen. I searched for the solution and some one told me to disconnect phone when flashing reached at 99% and then reattach it after changing the port. I did that but what I got was worse than before. :crying: Now I can get into recovery screen but after applying factory reset, phone goes off and restart again without doing any thing. My phone is stuck on boot loop at LG Logo. it keep booting when i connect to a charger or my computer . I cant get into download mod now. when I try to get into download mod, the screen with some dots appear and then phone restart again without going into download mod. when I connect my phone to PC it only do boot looping and nothing appear on my computer. My phone does not appear in device manager. Is there anything I can do now????????
Click to expand...
Click to collapse
hi @Shahidessa any luck ? what happend did you suceed flashing the phone ? same problem with mine as well T-mobile H901 but not detedting in LGUP. any idea on LG Flash tool ?
SandyKick said:
hi @Shahidessa any luck ? what happend did you suceed flashing the phone ? same problem with mine as well T-mobile H901 but not detedting in LGUP. any idea on LG Flash tool ?
Click to expand...
Click to collapse
Nop. .. I sent my phone to a friend to get that repair from a repairing shop... not received back yet....
Shahidessa said:
Nop. .. I sent my phone to a friend to get that repair from a repairing shop... not received back yet....
Click to expand...
Click to collapse
Failed several times and gave up with LG UP. So i took my phone to a mobile service center who is good at software flashing. i gave him nougat kdz F600S30D. He converted kdz to dz format and flashed with Octoplus box. my mobile was on 5.1.1 android and directly flashed Nougat. Booted flawlessly and no network problems as well Everything is working just awesome. attached my video of Nougat Overview
F600S Nougat Overview - https://www.youtube.com/watch?v=1imf_Utze44&t=18s
SandyKick said:
Failed several times and gave up with LG UP. So i took my phone to a mobile service center who is good at software flashing. i gave him nougat kdz F600S30D. He converted kdz to dz format and flashed with Octoplus box. my mobile was on 5.1.1 android and directly flashed Nougat. Booted flawlessly and no network problems as well Everything is working just awesome. attached my video of Nougat Overview
F600S Nougat Overview - https://www.youtube.com/watch?v=1imf_Utze44&t=18s
Click to expand...
Click to collapse
Great.... I am happy for you... My phone rejected by 3 repair shops as my friend told me.....
Hello, my Motorola e Android phone got hard bricked and it began suddenly with the first error message being constant boot looping and eventually going to an error message with an adroid on its back where it said partition was corrupt or damaged and the only choices were try again or factory reset. I kept trying again.
I tried to fix it and eventually ended up stuck on ap fastboot flash mode(secure) and it says oem locked.
I gave up trying to do it myself and want to factory reset but recovery mode won't work even if I press it, says that start up failed and goes back to fastboot mode. It's stuck.
Serial number is ZY22DLT4R and last letter is a V or W, can't tell.
I dont know to flash or custom rom. Tried a few but I only have windows 10 on my PC and it didn't install drivers properly and I need this phone fixed ASAP . I think I'm considered a newbie.
I also need to know if it's too far gone so I'm prepared to buy another crappy phone and lose all my data. I don't have days/weeks to learn tutorials about how to mod, etc.
Please help.
edit: I don't know if my bootloader is locked or unlocked.
Re-flash phone's Stock ROM by means of this tool
Download Moto Auto Flash Tool v8.2 by Jamesjerss (2022)
Download Moto Auto Flash Tool v8.2 by Jamesjerss to flash Firmware on Motorola Phones. Follow this guide to Root, Unlock Bootloader, etc.
www.ytechb.com