Hard bricked when flashing - Micromax A106 Unite 2

I was trying to root my unite 2 using sp flash tools but it failed and my mobile is not switching on even it is not getting charged but it is detected by pc.Can someone tell any solution

jeevan123 said:
I was trying to root my unite 2 using sp flash tools but it failed and my mobile is not switching on even it is not getting charged but it is detected by pc.Can someone tell any solution
Click to expand...
Click to collapse
If its detected by PC, then using SP flash tools, try flashing a new ROM again... and it should be back to normal again....

when iam flashing to my mobile error occurred that ERROR 4032 : Enable DRAM failed! what i do >? plz help me i am downgrading to lollipop to kitkat help me please

Did anyone found the solution?

i need the same information
i am also unable to format my previous rom...................

plz help
i have micromax unite 2.my phone was hard bricked.and i tooked it to the repair shop where he opened my phone,did something wit it then next day he returned me my phone saying it will not work.....after few days i again tried sp flash tool to just gave it a check and i was able to flash new rom to it .now my phone is booting up i heard the bootup sound,even the volume rockers are working but it is showing nothing on the screen .what would be the problem....plz help

[email protected] said:
i have micromax unite 2.my phone was hard bricked.and i tooked it to the repair shop where he opened my phone,did something wit it then next day he returned me my phone saying it will not work.....after few days i again tried sp flash tool to just gave it a check and i was able to flash new rom to it .now my phone is booting up i heard the bootup sound,even the volume rockers are working but it is showing nothing on the screen .what would be the problem....plz help
Click to expand...
Click to collapse
take it to micromax care they will flash stock software to it . i had same problem a year ago

Related

[Q] A110q not running

hello friends. my micromax canvas 2 plus is not running now... i am looking forward to find this solution as early as possible
my micromax canvas 2 plus is not running now, it shows only canvas logo and nothing appears, and this all happens because today i tired to install new ROM - Color-Os_V.1.2_3.zip, for that, i follow all steps from
http://forum.xda-developers.com/mic...tom-rom-color-os-rom-micromax-canvas-t2585464
, but not able to install.. during recovery mode i got error that update is abort ... i thought that may be increasing partition will help so i tried using SP flash on window xp and followed steps as discuss
http://forum.xda-developers.com/mic...q-canvas-2-t2568182/post48447661#post48447661
but after that i got "sp flash tool error 8038" and since not able to run canvas 2 plus, it shows only canvas logo and nothing happens
when i tried to use recovery mode again by pressing together "power, + volume, - volume button" i see that error saying not able to
E mount sd card
please help me friends
i think i might have done something wrong
i guess i did format first by using SP FLASH .... please someone provide me files that i need to install using SP FLASH
prakash001 said:
hello friends. my micromax canvas 2 plus is not running now... i am looking forward to find this solution as early as possible
my micromax canvas 2 plus is not running now, it shows only canvas logo and nothing appears, and this all happens because today i tired to install new ROM - Color-Os_V.1.2_3.zip, for that, i follow all steps from
http://forum.xda-developers.com/mic...tom-rom-color-os-rom-micromax-canvas-t2585464
, but not able to install.. during recovery mode i got error that update is abort ... i thought that may be increasing partition will help so i tried using SP flash on window xp and followed steps as discuss
http://forum.xda-developers.com/mic...q-canvas-2-t2568182/post48447661#post48447661
but after that i got "sp flash tool error 8038" and since not able to run canvas 2 plus, it shows only canvas logo and nothing happens
when i tried to use recovery mode again by pressing together "power, + volume, - volume button" i see that error saying not able to
E mount sd card
please help me friends
Click to expand...
Click to collapse
Proper drivers were not installed while flashing... Install the drivers and try again, else directly flash the stock rom using this guide www.droidarena.in/Thread-Stock-ROM-for-Micromax-Canvas-2-Plus-A110Q
Even I had bricked my phone partitioning once because of no proper driver...
IF nothing helps service centre is always there Good Luck

[Q] Micromax Unite 2 not starting

Hi, I have and Micromax Unite 2(A106) 8gb model
I want to downgrade it to Jellybean for installing custom rom but the phone was not booting up into recovery mode after flashing with SP TOOLS. :crying: So it formatted the phone using SPTOOL AUTOFORMAT.
Now the phone is neither turing on nor detecting the usb cabel without battery.
Plzzz help me
Plz:crying:
never root the phone with something it is not meant for unless you are developing it yourself specially for you device. Every device has its limitation and speciallity and the rom is designed for it, You use it you are heading for a motherboard replacement
The only solution
amanraj65 said:
Hi, I have and Micromax Unite 2(A106) 8gb model
I want to downgrade it to Jellybean for installing custom rom but the phone was not booting up into recovery mode after flashing with SP TOOLS. :crying: So it formatted the phone using SPTOOL AUTOFORMAT.
Now the phone is neither turing on nor detecting the usb cabel without battery.
Plzzz help me
Plz:crying:
Click to expand...
Click to collapse
you have hard bricked your phone.
google about how to recover from hard bricked mmx unite 2
if this help press like
try reflash with original firmware.
I hv the same prblm with my unite 2 and i went lots of repairing center bt they are not able to repair the phone because its not detecting by usb cable and then I went to micromax customer care and they told me the phone will b repair bt u r not in warranty because of rooted fon you have to pay 1800rs then my phone will come in working condition.
so go to your nearest mmx cstmr care and cunsult with them.
My micromachining unite 2 is not opening . And factory reset also not coming. When switch on the phone it just blink micromax
amanraj65 said:
Hi, I have and Micromax Unite 2(A106) 8gb model
I want to downgrade it to Jellybean for installing custom rom but the phone was not booting up into recovery mode after flashing with SP TOOLS. :crying: So it formatted the phone using SPTOOL AUTOFORMAT.
Now the phone is neither turing on nor detecting the usb cabel without battery.
Plzzz help me
Plz:crying:
Click to expand...
Click to collapse
Hello... You can unbrick your device...
Download original micromax a106 firmware from firmwarefile.com and try to flash it...
I hope it will work for you...
And You are saying that you want to downgrade your device to jellybean for installing rom but in real our device don't have official jellybean firmware our device have only lolipop and kitkat official firmware...
So i think you installed wrong firmware so try to flash original firmware...
You can install any roms from kitkat firmware...so You don't need to downgrade your device to jellybean...
Good Luck...
Whoops... Sorry... For late reply... Your device bricked in November 2014 so i think you repaired your device in 2014 or 2015 but i hope this reply can help another user...
Manish Kumawat said:
Hello... You can unbrick your device...
Download original micromax a106 firmware from firmwarefile.com and try to flash it...
I hope it will work for you...
And You are saying that you want to downgrade your device to jellybean for installing rom but in real our device don't have official jellybean firmware our device have only lolipop and kitkat official firmware...
So i think you installed wrong firmware so try to flash original firmware...
You can install any roms from kitkat firmware...so You don't need to downgrade your device to jellybean...
Good Luck...
Whoops... Sorry... For late reply... Your device bricked in November 2014 so i think you repaired your device in 2014 or 2015 but i hope this reply can help another user...
Click to expand...
Click to collapse
Hey I need help...my mmx unite 2 is hard bricked and can't flash through sp flash tool
last year in november.....i also hard bricked my mmx unite 2 like this only... and guess what....now i have moto g3 and that new looking mmx unite 2 is still there in my bag but unfortunately its completely unresponsive....i still google sometimes and also visit xda to find solution to get back it in working condition...but i dnt find anything...so guys if anyone of u finds solution to that prblm..plzz let me knw...
I have micromax unite 2 phone.My problem is the phone is just showing the logo when starting and it is not moving further.everything i have checked but the condition is same.help me out other than hard reset.
Search and find solution for boot loop

[Completed] [Q] Bricked device( i suppose)

Hi All ,
I have a xolo q1010i which was running on few custom roms previously before I managed to get the flash stock rom from (brieftutorials.com/how-to-unbrick-xolo-q1010i-by-installing-stock-rom/[/url])
Now I used the SP flash tool to unbrick it and install the stock rom, it worked fine until i found that the IMEI was lost.
Still i managed to insert imei using uncle tools and everything was fine.
this is where the problem starts:
I got an update OTA for KitKat and once I updated it the phone was stuck in a loop
So i connected sp flash tool and ran the 4.2.2 stock rom, but suddenly half way I got an error messasge and that was the end.
I have a black screen device on which nothing works, no logo , no charging light, no power + volume up, no power+volume up+down etc .
Not even lights,
Windows says an unidentified device detected and SP flash tool does'nt work.
Have no clue what to do , Is this the end ? or do I have to try the USB Jig / send it for Jtag repair ?
All comments & Ideas appreciated.
Thanks in advance
_____________
Hola,
I managed to resurrect my mobile, I tried Jtag to bypass the preloader by researching a lot ( thanks to my all posts china mobile website) then used SP tools to flash the stock rom ( thanks to Kalaishere XDA )
Finally its working on Jellybean.
I will soon update it and also fix the tiny issue with no imei number
Issue resolved, thread closed, thanks.

My Karbon Sparkle V got dead..Please Provide Solution

Hi..My mobile got dead while updating stock rom using SP flash tool. I have chosen Download+Formal All option. While doing after detecting my mobile Yellow level got stuck at 6% and after that I could not be able to reflash the stock rom as mobile is not booting and showing nothing and as a result totally got dead. Next time I've tried using Download Only option however mobile not responding anything. Please help me..!!
Hey Bro!
Select Firmware Upgrade in Sp Tool
Use The Latest Sp Tool As Old One has Some Error wit MT6582

Qmobile Z10 bricked after flashing wiko fever rom

Hello guys can any body help me please i have into a big trouble after flashing weko fever rom on my Qmobile Z10.
First i flashed weko fever rom using SP flasher Tool but after flashing when i switched on my mobile it is not recognize my both sims and also Imies fields got empty. So i decided to root it but after using many tools i was unable to root my cel. So i decided to revert back to it's original stock rom so i download and refleshed using SP flasher Tool but after flashed stock rom my cel was hard bricked and unable to switched on now but when i connect USB cable only red light on and also recognized from PC. I tried lot of method from XDA website but unable to recover my cell phone back to it's orignal stat. So i decided to post here plz any Developer help me plz to recover my cell phone back to it's running state.
Plz plz plz............
Thanks in advance.
m.haseebhaider said:
Hello guys can any body help me please i have into a big trouble after flashing weko fever rom on my Qmobile Z10.
First i flashed weko fever rom using SP flasher Tool but after flashing when i switched on my mobile it is not recognize my both sims and also Imies fields got empty. So i decided to root it but after using many tools i was unable to root my cel. So i decided to revert back to it's original stock rom so i download and refleshed using SP flasher Tool but after flashed stock rom my cel was hard bricked and unable to switched on now but when i connect USB cable only red light on and also recognized from PC. I tried lot of method from XDA website but unable to recover my cell phone back to it's orignal stat. So i decided to post here plz any Developer help me plz to recover my cell phone back to it's running state.
Plz plz plz............
Thanks in advance.
Click to expand...
Click to collapse
Your problem sloved or still stuck??

Categories

Resources