Database Info

[Q] Gionee E3 dead after flashing chinese firmware.

my e3 gionee in not booting after flashing chinese firmware. i flashed with sp flash tool. all went well till the green ring . but when i disconnected and tried to boot nothing is happening. tried flashing the stock rom but every time it is giving pmt changed error. tried various stick roms but still the same error. tried changing mode from download to firmware upgrade but error is changed to ”unrecognised rom". please help me . its in dead condition now.

I think it can't be fixed so easily... Take it to the service center
Sent from my A900 using XDA Premium 4 mobile app

[Completed] [Q] Bricked device( i suppose)

Hi All ,
I have a xolo q1010i which was running on few custom roms previously before I managed to get the flash stock rom from (brieftutorials.com/how-to-unbrick-xolo-q1010i-by-installing-stock-rom/[/url])
Now I used the SP flash tool to unbrick it and install the stock rom, it worked fine until i found that the IMEI was lost.
Still i managed to insert imei using uncle tools and everything was fine.
this is where the problem starts:
I got an update OTA for KitKat and once I updated it the phone was stuck in a loop
So i connected sp flash tool and ran the 4.2.2 stock rom, but suddenly half way I got an error messasge and that was the end.
I have a black screen device on which nothing works, no logo , no charging light, no power + volume up, no power+volume up+down etc .
Not even lights,
Windows says an unidentified device detected and SP flash tool does'nt work.
Have no clue what to do , Is this the end ? or do I have to try the USB Jig / send it for Jtag repair ?
All comments & Ideas appreciated.
Thanks in advance
_____________
Hola,
I managed to resurrect my mobile, I tried Jtag to bypass the preloader by researching a lot ( thanks to my all posts china mobile website) then used SP tools to flash the stock rom ( thanks to Kalaishere XDA )
Finally its working on Jellybean.
I will soon update it and also fix the tiny issue with no imei number

Issue resolved, thread closed, thanks.

My Phone a919i DUo

Hi guys.
i had this phone kind of phone (myphone a919i duo) that is given to me by my friend...
its in a bootloop now.. when turned on it stocks on the myphone LogO..
so what i did. is i downloaded splash tool and firmware from this site... and also tinno s 9091
here we come.. after downloading .. i extract the flash tool and the firware...
i opened the flash tool and then load the scatter file.. and click DOWNLOAD..
then my phone detected.. but there some errors.. it says no space availbale...
then go back to flash tool.. i clicked the format then it says ok...
and now i think i had bricked my phone..
it look like its dead now.. pressing the power button no response..
its totally black screen. whenever i tried to connect it to the charger still black screen..
can someone help me over here..
i dont really know what to do.. please save my phone and save me from being killed by my friend LOL:laugh:

Did you got solution

my phone
not yet sir.. until now.. could you help me over this

I think its just black screen error
Try to reconnect your device into the comptuer andcheck if spflashtool detects it and reflash the firmware you downloaded
Sent from my MyPhone A919i Duo using XDA Free mobile app

Hard bricked when flashing

I was trying to root my unite 2 using sp flash tools but it failed and my mobile is not switching on even it is not getting charged but it is detected by pc.Can someone tell any solution

jeevan123 said:
I was trying to root my unite 2 using sp flash tools but it failed and my mobile is not switching on even it is not getting charged but it is detected by pc.Can someone tell any solution
Click to expand...
Click to collapse
If its detected by PC, then using SP flash tools, try flashing a new ROM again... and it should be back to normal again....

when iam flashing to my mobile error occurred that ERROR 4032 : Enable DRAM failed! what i do >? plz help me i am downgrading to lollipop to kitkat help me please

Did anyone found the solution?

i need the same information
i am also unable to format my previous rom...................

plz help
i have micromax unite 2.my phone was hard bricked.and i tooked it to the repair shop where he opened my phone,did something wit it then next day he returned me my phone saying it will not work.....after few days i again tried sp flash tool to just gave it a check and i was able to flash new rom to it .now my phone is booting up i heard the bootup sound,even the volume rockers are working but it is showing nothing on the screen .what would be the problem....plz help

[email protected] said:
i have micromax unite 2.my phone was hard bricked.and i tooked it to the repair shop where he opened my phone,did something wit it then next day he returned me my phone saying it will not work.....after few days i again tried sp flash tool to just gave it a check and i was able to flash new rom to it .now my phone is booting up i heard the bootup sound,even the volume rockers are working but it is showing nothing on the screen .what would be the problem....plz help
Click to expand...
Click to collapse
take it to micromax care they will flash stock software to it . i had same problem a year ago

Qmobile Z10 bricked after flashing wiko fever rom

Hello guys can any body help me please i have into a big trouble after flashing weko fever rom on my Qmobile Z10.
First i flashed weko fever rom using SP flasher Tool but after flashing when i switched on my mobile it is not recognize my both sims and also Imies fields got empty. So i decided to root it but after using many tools i was unable to root my cel. So i decided to revert back to it's original stock rom so i download and refleshed using SP flasher Tool but after flashed stock rom my cel was hard bricked and unable to switched on now but when i connect USB cable only red light on and also recognized from PC. I tried lot of method from XDA website but unable to recover my cell phone back to it's orignal stat. So i decided to post here plz any Developer help me plz to recover my cell phone back to it's running state.
Plz plz plz............
Thanks in advance.

m.haseebhaider said:
Hello guys can any body help me please i have into a big trouble after flashing weko fever rom on my Qmobile Z10.
First i flashed weko fever rom using SP flasher Tool but after flashing when i switched on my mobile it is not recognize my both sims and also Imies fields got empty. So i decided to root it but after using many tools i was unable to root my cel. So i decided to revert back to it's original stock rom so i download and refleshed using SP flasher Tool but after flashed stock rom my cel was hard bricked and unable to switched on now but when i connect USB cable only red light on and also recognized from PC. I tried lot of method from XDA website but unable to recover my cell phone back to it's orignal stat. So i decided to post here plz any Developer help me plz to recover my cell phone back to it's running state.
Plz plz plz............
Thanks in advance.
Click to expand...
Click to collapse
Your problem sloved or still stuck??