Hi guys.
i had this phone kind of phone (myphone a919i duo) that is given to me by my friend...
its in a bootloop now.. when turned on it stocks on the myphone LogO..
so what i did. is i downloaded splash tool and firmware from this site... and also tinno s 9091
here we come.. after downloading .. i extract the flash tool and the firware...
i opened the flash tool and then load the scatter file.. and click DOWNLOAD..
then my phone detected.. but there some errors.. it says no space availbale...
then go back to flash tool.. i clicked the format then it says ok...
and now i think i had bricked my phone..
it look like its dead now.. pressing the power button no response..
its totally black screen. whenever i tried to connect it to the charger still black screen..
can someone help me over here..
i dont really know what to do.. please save my phone and save me from being killed by my friend LOL:laugh:
Did you got solution
my phone
not yet sir.. until now.. could you help me over this
I think its just black screen error
Try to reconnect your device into the comptuer andcheck if spflashtool detects it and reflash the firmware you downloaded
Sent from my MyPhone A919i Duo using XDA Free mobile app
Related
hey there..i need some serious help!!! my micromax a110 is not working:crying::crying: it so happened that my cell suddenly got switched off..n den when i tried to switch it on it didnt start. just the starting screen appears and then it goes dead..then again the starting screen appears and it goes dead:crying::crying::crying:..please help me!!!! someone??? anyone???
try getting into recovery (vol + or - and pwr) and make a full wipe. if it will not power on, try flashing a new firmware. make sure you got the right one!
if u have cwm added then try to go to recovery n flash any custom rom of C2
if not then
Flash Stock rom using Sp tool it will Solve ur problem
dewdrops said:
hey there..i need some serious help!!! my micromax a110 is not working:crying::crying: it so happened that my cell suddenly got switched off..n den when i tried to switch it on it didnt start. just the starting screen appears and then it goes dead..then again the starting screen appears and it goes dead:crying::crying::crying:..please help me!!!! someone??? anyone???
Click to expand...
Click to collapse
I think it's out of charge, just plug in the charger and see what happens..
yog12 said:
if u have cwm added then try to go to recovery n flash any custom rom of C2
if not then
Flash Stock rom using Sp tool it will Solve ur problem
Click to expand...
Click to collapse
i tried doing that but thats not working...can you please tell me the procedure?
Lets Start
dewdrops said:
i tried doing that but thats not working...can you please tell me the procedure?
Click to expand...
Click to collapse
1)Install Drivers.
2)Open SP tool
3)Select 'Android Scatter file' inside ROM folder.
4)Click Firmware->Upgrade Button.
5)Connect Phone{Switched off} to PC via USB Cable.
6If everythings right,Flashing will proceed..
7)Wait till It finishes..A green ring is displayed on completion..
8))Now Close SP tool..Remove Phone from PC..
9)Switch ON the phone...It is successfully Flashed...:laugh:
I also face same problem some time when I make Factory or DRM reset
Green Android Robo with rotating frame
Start again and again. No switch off .. No effect after remove battery..
Only 1 solution "Do flash with SP Tool"
dewdrops said:
i tried doing that but thats not working...can you please tell me the procedure?
Click to expand...
Click to collapse
Hey no worries.. just follow my dis thread 'unbrick bricked canvas 2' :thumbup:
Link: http://forum.xda-developers.com/showthread.php?t=2376667
hit thx if i helped...
I Have "Karbonn Titanium S5+"
Android 4.2.2
My friend tried to update some custom recovery on it by Total Commander and after that it is not starting, it flashes the logo "Karbonn" and swithes of and vice versa. I take this to Software Expert he tried some tools on it like "Volcano", "Miracle Box" etc. but it did not start even now it shows no Karbonn logo, now it shows only black screen and when I try to connect it with PC only a connectivity sound plays and nothing happens to the device.
PLease give any solution if anyone have this problem sorted out.
Thanx in advance.
You may have bricked your s5
Sent from my A15 using XDA Premium 4 mobile app
check here http://forum.xda-developers.com/showthread.php?t=2459150
Not working
jamesjerss said:
check here http://forum.xda-developers.com/showthread.php?t=2459150
Click to expand...
Click to collapse
Brother I have checked this but this solution is not working on Karbonn S5 Plus it is for Karbonn S5
and as I have wrote above there is neither fastboot mode nor any recover options are available when I start it while pressing Volume up or Volume down keys
There is only Black screen
only a sound notification comes when i attached this to my computer
If the clues above mentioned are the adequate for any solution then I will strongly thankful for that.
manpreet08 said:
Brother I have checked this but this solution is not working on Karbonn S5 Plus it is for Karbonn S5
and as I have wrote above there is neither fastboot mode nor any recover options are available when I start it while pressing Volume up or Volume down keys
There is only Black screen
only a sound notification comes when i attached this to my computer
If the clues above mentioned are the adequate for any solution then I will strongly thankful for that.
Click to expand...
Click to collapse
Try to obtain the boot.img, system.img and the kernel for your phone. The company would have released the source for your phone. And try to enter fastboot mode to flash those img files. If that doesn't work, then I'm sorry but unless there's some miracle of sorts, its not going to work.
Manpreet,Give back your phone to the place where you bought it and just use your acting skills.it happened to me and i gave my mobile back to the shop and the shop gave it to warranty location.After 1-2 months you will get your phone back and if it doesnt get repaired you may get a new one...
You have bricked it
manpreet08 said:
I Have "Karbonn Titanium S5+"
Android 4.2.2
My friend tried to update some custom recovery on it by Total Commander and after that it is not starting, it flashes the logo "Karbonn" and swithes of and vice versa. I take this to Software Expert he tried some tools on it like "Volcano", "Miracle Box" etc. but it did not start even now it shows no Karbonn logo, now it shows only black screen and when I try to connect it with PC only a connectivity sound plays and nothing happens to the device.
PLease give any solution if anyone have this problem sorted out.
Thanx in advance.
My Contact No. +91 9653932539 and Email- [email protected]
Whats app – +91 9501215888
Click to expand...
Click to collapse
Take your phone to authorized karbonn service center
they just flsh your phone without any charge
Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.
Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...
N'ayam Amarsh'e said:
Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...
Click to expand...
Click to collapse
he was trying to install a custom ROM and flashed the PRELOADER first...the process stopped halfway through and the phone has been bricked ever since.. :crying:
rakave said:
Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.
Click to expand...
Click to collapse
did you try to restock it.. installing a stock rom is the last option if available.. if the phone is not even turning on, check battery.. make sure your battery is charged..
and at last.. you could just try taking it to the service center if it's in warrenty.. but make sure it doesn't turn on.. don't tell them you were flashing.. they will never know.. hope it help in any way..
btw check out my signature...
I was trying to root my unite 2 using sp flash tools but it failed and my mobile is not switching on even it is not getting charged but it is detected by pc.Can someone tell any solution
jeevan123 said:
I was trying to root my unite 2 using sp flash tools but it failed and my mobile is not switching on even it is not getting charged but it is detected by pc.Can someone tell any solution
Click to expand...
Click to collapse
If its detected by PC, then using SP flash tools, try flashing a new ROM again... and it should be back to normal again....
when iam flashing to my mobile error occurred that ERROR 4032 : Enable DRAM failed! what i do >? plz help me i am downgrading to lollipop to kitkat help me please
Did anyone found the solution?
i need the same information
i am also unable to format my previous rom...................
plz help
i have micromax unite 2.my phone was hard bricked.and i tooked it to the repair shop where he opened my phone,did something wit it then next day he returned me my phone saying it will not work.....after few days i again tried sp flash tool to just gave it a check and i was able to flash new rom to it .now my phone is booting up i heard the bootup sound,even the volume rockers are working but it is showing nothing on the screen .what would be the problem....plz help
[email protected] said:
i have micromax unite 2.my phone was hard bricked.and i tooked it to the repair shop where he opened my phone,did something wit it then next day he returned me my phone saying it will not work.....after few days i again tried sp flash tool to just gave it a check and i was able to flash new rom to it .now my phone is booting up i heard the bootup sound,even the volume rockers are working but it is showing nothing on the screen .what would be the problem....plz help
Click to expand...
Click to collapse
take it to micromax care they will flash stock software to it . i had same problem a year ago
Hai hello every one.. Im new here.. My mobile model is htc 526g+.. When is used root explorer, i accidentally delete system>bin, system>lib and another one folder.. I do this my phone gets stuck on android logo..... I tried wiping cache / factory rest....and tried local service center for the flashing.. but no luck... what:They are return my phone..
Please anyone help me... Thanks in advance..
maniraj95 said:
Hai hello every one.. Im new here.. My mobile model is htc 526g+.. When is used root explorer, i accidentally delete system>bin, system>lib and another one folder.. I do this my phone gets stuck on android logo..... I tried wiping cache / factory rest....and tried local service center for the flashing.. but no luck... what:They are return my phone..
Please anyone help me... Thanks in advance..
Click to expand...
Click to collapse
You will need to flash the stock rom for your phone to boot again
How to do
Download stock rom for ur devices.
Download specific sp tool to flash it.
Download usb driver for devices.
Adb setup exe file.
Generaaly stock is not available.
If u want PM me.
Sent from my A104 using XDA Free mobile app