[Q] micromax a110 is not working - Micromax A110

hey there..i need some serious help!!! my micromax a110 is not working:crying::crying: it so happened that my cell suddenly got switched off..n den when i tried to switch it on it didnt start. just the starting screen appears and then it goes dead..then again the starting screen appears and it goes dead:crying::crying::crying:..please help me!!!! someone??? anyone???

try getting into recovery (vol + or - and pwr) and make a full wipe. if it will not power on, try flashing a new firmware. make sure you got the right one!

if u have cwm added then try to go to recovery n flash any custom rom of C2
if not then
Flash Stock rom using Sp tool it will Solve ur problem

dewdrops said:
hey there..i need some serious help!!! my micromax a110 is not working:crying::crying: it so happened that my cell suddenly got switched off..n den when i tried to switch it on it didnt start. just the starting screen appears and then it goes dead..then again the starting screen appears and it goes dead:crying::crying::crying:..please help me!!!! someone??? anyone???
Click to expand...
Click to collapse
I think it's out of charge, just plug in the charger and see what happens..

yog12 said:
if u have cwm added then try to go to recovery n flash any custom rom of C2
if not then
Flash Stock rom using Sp tool it will Solve ur problem
Click to expand...
Click to collapse
i tried doing that but thats not working...can you please tell me the procedure?

Lets Start
dewdrops said:
i tried doing that but thats not working...can you please tell me the procedure?
Click to expand...
Click to collapse
1)Install Drivers.
2)Open SP tool
3)Select 'Android Scatter file' inside ROM folder.
4)Click Firmware->Upgrade Button.
5)Connect Phone{Switched off} to PC via USB Cable.
6If everythings right,Flashing will proceed..
7)Wait till It finishes..A green ring is displayed on completion..
8))Now Close SP tool..Remove Phone from PC..
9)Switch ON the phone...It is successfully Flashed...:laugh:

I also face same problem some time when I make Factory or DRM reset
Green Android Robo with rotating frame
Start again and again. No switch off .. No effect after remove battery..
Only 1 solution "Do flash with SP Tool"

dewdrops said:
i tried doing that but thats not working...can you please tell me the procedure?
Click to expand...
Click to collapse
Hey no worries.. just follow my dis thread 'unbrick bricked canvas 2' :thumbup:
Link: http://forum.xda-developers.com/showthread.php?t=2376667
hit thx if i helped...

Related

[q] urgent help pls

GUYS PLS HELP!!!!
I installed dxkp9 and its cf root.....then i again went into download mode...connected pc.....thn my little bro jst plugged it out and now when i try to restart .... it shows an exclamation mark b/w a phone and a pc
help pls suggest an answer.!!!
..................................
Solved : was able to boot into download mode and flash cf root again....
btw why did that happen???
cix18 said:
GUYS PLS HELP!!!!
I installed dxkp9 and its cf root.....then i again went into download mode...connected pc.....thn my little bro jst plugged it out and now when i try to restart .... it shows an exclamation mark b/w a phone and a pc
help pls suggest an answer.!!!
..................................
Solved : was able to boot into download mode and flash cf root again....
btw why did that happen???
Click to expand...
Click to collapse
probably because, based on what you said, he disconnected it while you were doing something like re-writing files...
Same issue happened to me Pull the battery out and try to put the phone back in the download mode and flash the CF-root again...

[Q] Xperia miro Stop working totally !!

My Xperia miro stop working totally after i install one of ur custom rom totally >> ineed help plz .. and icant post anything yet in the page of this rom ??
the phone not respond to charger .. the battery is will also charger work .. the phone stop boot or light any thing ?>?
??
I know that you are in panic, but could you PLEASE, i beg you speak propper english.
Because I can't seem to understand what you are saying..
the shadow 2013 said:
My Xperia miro stop working totally after i install one of ur custom rom totally >> ineed help plz .. and icant post anything yet in the page of this rom ??
the phone not respond to charger .. the battery is will also charger work .. the phone stop boot or light any thing ?>?
??
Click to expand...
Click to collapse
Ohh...
Now your phone is dead...don't panick..
Just explain a little more...
Which Rom were u having previously
Which Rom did u flash?
Does it show Sony logo?
Can you enter fastboot or flashmode?
Have you tried to flash stock ftf..
Thank me if I helped you..
mathewsj114 said:
Ohh...
Now your phone is dead...don't panick..
Just explain a little more...
Which Rom were u having previously
Which Rom did u flash?
Does it show Sony logo?
Can you enter fastboot or flashmode?
Have you tried to flash stock ftf..
Thank me if I helped you..
Click to expand...
Click to collapse
its just custome rom for stock rom >> no thing appear the phone not respond to any key or charger >> also fastboot or flashmode not work >> i try all of this >> so i cant flash or do anything >> but the last thing happened before the phone turn off.. after i setup this rom from recovery mode the mobile restart repeatly for many times but i didnt notice for a while then phone turn off and stop to respound totaly for antthin ... thank u for ur help and i hope that u can help me
Try sony update service software
Or pc companion and click on repair button
It will solve your problem
Hit thanks if i helped you
Sent from my ST21i2 using xda premium
the shadow 2013 said:
its just custome rom for stock rom >> no thing appear the phone not respond to any key or charger >> also fastboot or flashmode not work >> i try all of this >> so i cant flash or do anything >> but the last thing happened before the phone turn off.. after i setup this rom from recovery mode the mobile restart repeatly for many times but i didnt notice for a while then phone turn off and stop to respound totaly for antthin ... thank u for ur help and i hope that u can help me
Click to expand...
Click to collapse
Use SUS to replair it-
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymob...-2.11.12.5.exe
Not pretty sure if it will work or not!
But anyways try this once..and hit thanks if it starts!

[Guide] How to Unbrick Micromax Canvas 2 Plus A110Q

Hi everyone, this is a guide that help you to unbrick Micromax Canvas 2 Plus A110Q.
Follow all the steps carefully
1. Download the stock rom v1 from here . Do not download stock rom v2 from anywhere, that rom contain many bugs.
2. Download sp flash tools form here. (tool needed for flashing rom on the device)
3. Download USB drivers from here
Now you need to install the usb preloader drivers you just downlaoded.
To install the drivers:-
1.Extract the USB drivers.rar file.
2.Switch off your phone
3.Open device manager(search for "Device Manager") or click on computer properties , then device manager..
4.Connect your phone in OFF state
5.There will be a device named "mt65xx preloader" which will be there for some seconds.
You need to be quick at this. As soon as it is displayed, right click and click update driver.
Browse manually the files from usb drivers you extracted.
NOTE: THIS METHOD WILL NOT WORK ON WINDOWS 8
Now, if you are using windows 8 do this to install the drivers:
1. Dwonlaod the usb driver.rar file.
2. Hover pointer to Top Right corner of your screen, choose Settings from sidebar
3.Click last option "Change PC Settings"
4.Select "General"
5.Scroll to end and find "Restart Now" under "Advanced Startup". PC Will be in troubleshoot mode now
6.Once screen is back, select option "Troubleshoot"
7.Select "Advanced Options"
8.Select "Startup Settings"
9.Select "Restart"
Now important step. There will be several options to select from. You need to select "Option 7". For this press "7" key from number pad.
After your PC starts, follow above steps.
10. Choose the win 7 file from usb drivers.rar file to install drivers on windows 8 .
Now,
4. Extract ROM and Flash Tool
5. Open Flash_tool.exe from SP_FLASH Tools.
6.Select "Scatter-loading" and select "MT6589_Android_scatter_emmc.txt" from ROM folder
7.Select "Download" option, it will search for phone now.(if does not detect your phone pull the battery out and put it in again.)
8.Switch OFF the phone.
9.Connect it with USB (in OFF state only) (proper divers must be installed as said above)
10.If all goes well you'll see data transfer. At the end there will be Green Circle in middle of screen which means ROM is flashed.(don't panic if there is no green circle just let it work for 10 minutes and unplug your phone from computer.)
11.Remove phone, Switch it ON.
Thanks
Thanks for this guide. I think I bricked my Canvas2+. So I'm trying this now.
I tried this and it worked. Successfully unbricked my phone.
Sent from my IQ446 Magic using Tapatalk
supersapien said:
Thanks for this guide. I think I bricked my Canvas2+. So I'm trying this now.
Click to expand...
Click to collapse
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
---------- Post added at 10:39 AM ---------- Previous post was at 10:25 AM ----------
rahulbasu2013 said:
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
Click to expand...
Click to collapse
I rooted my phone using "Framaroot app" by Boromir exploit and also installed Superuser.
Using ROM Toolbox pro, I changed the system font on my device.
But when I tried to revert to the system font, the phone wont turn on; (I also forgot to take a Nandroid backup)
The phone gets stuck at the boot logo.
I can enter recovery mode, and I also factory reset my phone, wiped cache, etc, but its of no use (first it turns on and then after the boot logo animation, nothing happens....)
Is my phone bricked????
Please help.......
rahulbasu2013 said:
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
---------- Post added at 10:39 AM ---------- Previous post was at 10:25 AM ----------
I rooted my phone using "Framaroot app" by Boromir exploit and also installed Superuser.
Using ROM Toolbox pro, I changed the system font on my device.
But when I tried to revert to the system font, the phone wont turn on; (I also forgot to take a Nandroid backup)
The phone gets stuck at the boot logo.
I can enter recovery mode, and I also factory reset my phone, wiped cache, etc, but its of no use (first it turns on and then after the boot logo animation, nothing happens....)
Is my phone bricked????
Please help.......
Click to expand...
Click to collapse
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
supersapien said:
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
Click to expand...
Click to collapse
ok thanks...
rahulbasu2013 said:
ok thanks...
Click to expand...
Click to collapse
There is a thanks button
Plz help
supersapien said:
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
Click to expand...
Click to collapse
hey bro i also have same problem and my phone everytime stuck on bootloop but i am out of town now so is there any to flash stock rom using cwm
Thanks in advance
Plz
Samuel117 said:
hey bro i also have same problem and my phone everytime stuck on bootloop but i am out of town now so is there any to flash stock rom using cwm
Thanks in advance
Click to expand...
Click to collapse
Not any reply plz reply guys i need help
Hey I'm using Windows 8.1 pro... so any help?????
---------- Post added at 09:34 PM ---------- Previous post was at 09:30 PM ----------
Samuel117 said:
Not any reply plz reply guys i need help
Click to expand...
Click to collapse
How did you get into that problem?????
and can you describe in detail?
Using fastboot
rahulbasu2013 said:
Hey I'm using Windows 8.1 pro... so any help?????
---------- Post added at 09:34 PM ---------- Previous post was at 09:30 PM ----------
How did you get into that problem?????
and can you describe in detail?
Click to expand...
Click to collapse
i tried fastboot but not any keys work when i tried to go back so i remove my phone battery and when i put battery again and tried to switch on it stucked on bootlogo
Samuel117 said:
i tried fastboot but not any keys work when i tried to go back so i remove my phone battery and when i put battery again and tried to switch on it stucked on bootlogo
Click to expand...
Click to collapse
did you try the unbricking guide??? did that help??
No
rahulbasu2013 said:
did you try the unbricking guide??? did that help??
Click to expand...
Click to collapse
cant able to use those step out of town now not have pc here
It didn't Work.
I did everything correctly, the green circle appeared, still stuck on bootloop. HELP PLZ.
bluetooth not working
hey guyz i have installed custom rom lewa os5 in my canvas a110q, every things works fine but bluetooth is not working. is it rom problem or something else. is there any solution for this? kindly reply me [email protected] thnx.
anyone helpme frnds
i installed kitkat rom and now my phone is gets bugging when i lock phn it wont unlock again display was not coming
what i want to do???????????
sai teja badri said:
i installed kitkat rom and now my phone is gets bugging when i lock phn it wont unlock again display was not coming
what i want to do???????????
Click to expand...
Click to collapse
Flash v1 and then flash any rom or uboot.bin of v1 via sp tools
Sent from my C2305 using Tapatalk
guyz it cnat detect my phone on device manager....
in other devices in device manager...it shows micromax a110q and the phone just boots ....
plz help
What happened is that, i haven't rooted my phone yet and out of no where it goes into bootloop.
I followed all the steps from installing the drivers - till getting the green circle, but no success
Can you please help me?
Will it help ?
I have the same problem on Phone stuck on boot up....
I Never did any rooting/other software updates to my mobile.
The Problem started when a message like "some XYZ process has stopped"
I clicked OK but the message came 1 after the other many times so I though of rebooting mobile.... I gave reboot option and the problem raised and the phone never did start up. I tried factory reset but still the same........A friend suggested me this But i still want to confirm is it harmless to use this and is this the proper technique for my problem ?
Please Help Me....

[Q] Please Help, Samsung grand quattro gt-i8552 stuck in CWM Recovery

Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
sturkish said:
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
Click to expand...
Click to collapse
Can you boot into download/odin mode?
Hi I have the solution !!!
sturkish said:
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
Click to expand...
Click to collapse
Download this file
Code:
https://www.mediafire.com/?2dkdp5etfa9g2by
copy this file to your sd card..
then boot your phone normally and it will go into cwm mode as you mentioned ...
Select apply update zip from sd card...
Select the file you downloaded...
If it prompts select yes.... Your phone will boot into normall mode....
If you want all your contacts and smses backup you can do this by mobogenie software...
Hope it helps... if not message me... And dont forget to press thnx..
Yes
Kobro said:
Can you boot into download/odin mode?
Click to expand...
Click to collapse
Yes i can go to downloading mode but unfortunately odin can`t detect my phone.
Thanks Buddy
Thank you So much, let me give it a shot and let you know
sturkish said:
Yes i can go to downloading mode but unfortunately odin can`t detect my phone.
Click to expand...
Click to collapse
Then maybe its a driver problem? try downloading "samsung drivers for mobile phones", maybe that will let you get into odin and flash a stock rom.
Cant enter cwm recovery
Anyone can help me,i cant enter cwm recovery even though i press volume up + power + home button.If anyone have any idea tell me pls!!! thx alot!!!:crying:
OP Junior said:
Anyone can help me,i cant enter cwm recovery even though i press volume up + power + home button.If anyone have any idea tell me pls!!! thx alot!!!:crying:
Click to expand...
Click to collapse
wrong procedure bro..
power+home+vol up..hold them together and when phone vibrates then leave the power button but keep on holding the volume up and home button..you will go into you recovery. .
hit thanks ..it will motivate me..dont hesitate..
---------- Post added at 11:29 AM ---------- Previous post was at 11:24 AM ----------
sturkish said:
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
Click to expand...
Click to collapse
hey..just do one more thing in addition with all the things you have done
reflash cwm recovery using odin..but this time tick on auto reboot option..
n u r done!
if it worked please let me know..
and press thanks bro it will motivate me to help out severel peoples who messed up with their phone..
i 8552 stucks on samsung logo
hello all of u i done all as well as u tell above but now i face another problem while i reeboot the set it stucks on samsung logo & mtp drivers are not installing on my system . so due to mtp not installed odin is not working odin i am showing screen shoots of odin
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
after this it is doing nothing
please help me what to do
solution dint work
hi i tried with the file uv mentioned in the mediafire . but still im stuck in cwm mode .. when ever i boot it takes me to cwm mode ... please help ....
solution
gthm.dman said:
hi i tried with the file uv mentioned in the mediafire . but still im stuck in cwm mode .. when ever i boot it takes me to cwm mode ... please help ....
Click to expand...
Click to collapse
im good in English but i can help you, will dont use "reset to bootloader" using CWM, using "volume down+home+power" after the release power and while still holding volume down+home when you got in bootloader now connect your device in ODIN 3.07 it will detected now, change your recovery.tar.md5 using odin, i hope it will work
Didn't work!
archr3d said:
im good in English but i can help you, will dont use "reset to bootloader" using CWM, using "volume down+home+power" after the release power and while still holding volume down+home when you got in bootloader now connect your device in ODIN 3.07 it will detected now, change your recovery.tar.md5 using odin, i hope it will work
Click to expand...
Click to collapse
It's not working...
See.. The phone is booting directly to the CWM recovery..
ADB is working fine... I tested few commands using the cmd prompt and everything was fine..
After the phone enters Downloading mode,Odin couldn't recognize it...
I think Its because the Samsung Mobile USB CDC Composite Device divers are not properly installed in my PC ...
I tried everything to install it but I keep getting the "This device cannot start .Code 10" error...
So,Let me know how to fix this error...And that will solve the problem,I guess..
Thanks.
hello developers,
I have rooted mu samsung galaxy grand quattro. After that I have restored the system to factory reset. And from that time my system is in only CWM recovery. I have shown my phone in the service center as well. Those people are helpless. I guess my OS is missing. Please help me out.
And Thanks a Lot for this wonderful community and your endless support.
Legit Solution
sturkish said:
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
Click to expand...
Click to collapse
Hi there,
I just recently experienced this nightmare where I tried to factory reset my GT-I8552 and all went wrong. As u menioned,my device too got stuck into cwm recovery mode 6.0.4.5.
I searched the whole internet but to no avail. then i thought that my cwm might hv curropted or damaged.So i downloaded the stock cwm for GT-I8552 and flashed it using odin and say what..... my device booted normally!!
Hope this helps!
Currently i cannot send u the link but u can find the stock cwm for gt-i8552 from google!
 @parth3399
swapnilsj said:
hello developers,
I have rooted mu samsung galaxy grand quattro. After that I have restored the system to factory reset. And from that time my system is in only CWM recovery. I have shown my phone in the service center as well. Those people are helpless. I guess my OS is missing. Please help me out.
And Thanks a Lot for this wonderful community and your endless support.
Click to expand...
Click to collapse
Flash the cwm compactible to ur device using odin.... Worked for me !
I have also same issue and still stuck with this... please help..
bbsankarreddy said:
It's not working...
See.. The phone is booting directly to the CWM recovery..
ADB is working fine... I tested few commands using the cmd prompt and everything was fine..
After the phone enters Downloading mode,Odin couldn't recognize it...
I think Its because the Samsung Mobile USB CDC Composite Device divers are not properly installed in my PC ...
I tried everything to install it but I keep getting the "This device cannot start .Code 10" error...
So,Let me know how to fix this error...And that will solve the problem,I guess..
Thanks.
Click to expand...
Click to collapse
:
i have also same issue and i'm still stuck with this... please help .. i have install lot of drivers but the device did not detect in odin mode... need solution please
this helped me.
forum.xda-developers.com/showthread.php?t=2494471
Hi. I fixed mine by flashing cwm again but this time by ticking the Auto Reboot.
same problem here could you find any solution??
bbsankarreddy said:
It's not working...
See.. The phone is booting directly to the CWM recovery..
ADB is working fine... I tested few commands using the cmd prompt and everything was fine..
After the phone enters Downloading mode,Odin couldn't recognize it...
I think Its because the Samsung Mobile USB CDC Composite Device divers are not properly installed in my PC ...
I tried everything to install it but I keep getting the "This device cannot start .Code 10" error...
So,Let me know how to fix this error...And that will solve the problem,I guess..
Thanks.
Click to expand...
Click to collapse
hey, I am also facing with exact same issue, as I had cosmic ROM installed when i did factory reset from inside ROM it has stuck in bootloop in CWM and not even ODIN is able to recongnize it. I have tried lots of CDC drivers too, it recognizes my phone as LEmobile... I am stuck quite badly please help!!!!!!!!!!!!!!!!!!
heelp!
me too

My Phone a919i DUo

Hi guys.
i had this phone kind of phone (myphone a919i duo) that is given to me by my friend...
its in a bootloop now.. when turned on it stocks on the myphone LogO..
so what i did. is i downloaded splash tool and firmware from this site... and also tinno s 9091
here we come.. after downloading .. i extract the flash tool and the firware...
i opened the flash tool and then load the scatter file.. and click DOWNLOAD..
then my phone detected.. but there some errors.. it says no space availbale...
then go back to flash tool.. i clicked the format then it says ok...
and now i think i had bricked my phone..
it look like its dead now.. pressing the power button no response..
its totally black screen. whenever i tried to connect it to the charger still black screen..
can someone help me over here..
i dont really know what to do.. please save my phone and save me from being killed by my friend LOL:laugh:
Did you got solution
my phone
not yet sir.. until now.. could you help me over this
I think its just black screen error
Try to reconnect your device into the comptuer andcheck if spflashtool detects it and reflash the firmware you downloaded
Sent from my MyPhone A919i Duo using XDA Free mobile app

Categories

Resources