Hi everyone, this is a guide that help you to unbrick Micromax Canvas 2 Plus A110Q.
Follow all the steps carefully
1. Download the stock rom v1 from here . Do not download stock rom v2 from anywhere, that rom contain many bugs.
2. Download sp flash tools form here. (tool needed for flashing rom on the device)
3. Download USB drivers from here
Now you need to install the usb preloader drivers you just downlaoded.
To install the drivers:-
1.Extract the USB drivers.rar file.
2.Switch off your phone
3.Open device manager(search for "Device Manager") or click on computer properties , then device manager..
4.Connect your phone in OFF state
5.There will be a device named "mt65xx preloader" which will be there for some seconds.
You need to be quick at this. As soon as it is displayed, right click and click update driver.
Browse manually the files from usb drivers you extracted.
NOTE: THIS METHOD WILL NOT WORK ON WINDOWS 8
Now, if you are using windows 8 do this to install the drivers:
1. Dwonlaod the usb driver.rar file.
2. Hover pointer to Top Right corner of your screen, choose Settings from sidebar
3.Click last option "Change PC Settings"
4.Select "General"
5.Scroll to end and find "Restart Now" under "Advanced Startup". PC Will be in troubleshoot mode now
6.Once screen is back, select option "Troubleshoot"
7.Select "Advanced Options"
8.Select "Startup Settings"
9.Select "Restart"
Now important step. There will be several options to select from. You need to select "Option 7". For this press "7" key from number pad.
After your PC starts, follow above steps.
10. Choose the win 7 file from usb drivers.rar file to install drivers on windows 8 .
Now,
4. Extract ROM and Flash Tool
5. Open Flash_tool.exe from SP_FLASH Tools.
6.Select "Scatter-loading" and select "MT6589_Android_scatter_emmc.txt" from ROM folder
7.Select "Download" option, it will search for phone now.(if does not detect your phone pull the battery out and put it in again.)
8.Switch OFF the phone.
9.Connect it with USB (in OFF state only) (proper divers must be installed as said above)
10.If all goes well you'll see data transfer. At the end there will be Green Circle in middle of screen which means ROM is flashed.(don't panic if there is no green circle just let it work for 10 minutes and unplug your phone from computer.)
11.Remove phone, Switch it ON.
Thanks
Thanks for this guide. I think I bricked my Canvas2+. So I'm trying this now.
I tried this and it worked. Successfully unbricked my phone.
Sent from my IQ446 Magic using Tapatalk
supersapien said:
Thanks for this guide. I think I bricked my Canvas2+. So I'm trying this now.
Click to expand...
Click to collapse
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
---------- Post added at 10:39 AM ---------- Previous post was at 10:25 AM ----------
rahulbasu2013 said:
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
Click to expand...
Click to collapse
I rooted my phone using "Framaroot app" by Boromir exploit and also installed Superuser.
Using ROM Toolbox pro, I changed the system font on my device.
But when I tried to revert to the system font, the phone wont turn on; (I also forgot to take a Nandroid backup)
The phone gets stuck at the boot logo.
I can enter recovery mode, and I also factory reset my phone, wiped cache, etc, but its of no use (first it turns on and then after the boot logo animation, nothing happens....)
Is my phone bricked????
Please help.......
rahulbasu2013 said:
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
---------- Post added at 10:39 AM ---------- Previous post was at 10:25 AM ----------
I rooted my phone using "Framaroot app" by Boromir exploit and also installed Superuser.
Using ROM Toolbox pro, I changed the system font on my device.
But when I tried to revert to the system font, the phone wont turn on; (I also forgot to take a Nandroid backup)
The phone gets stuck at the boot logo.
I can enter recovery mode, and I also factory reset my phone, wiped cache, etc, but its of no use (first it turns on and then after the boot logo animation, nothing happens....)
Is my phone bricked????
Please help.......
Click to expand...
Click to collapse
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
supersapien said:
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
Click to expand...
Click to collapse
ok thanks...
rahulbasu2013 said:
ok thanks...
Click to expand...
Click to collapse
There is a thanks button
Plz help
supersapien said:
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
Click to expand...
Click to collapse
hey bro i also have same problem and my phone everytime stuck on bootloop but i am out of town now so is there any to flash stock rom using cwm
Thanks in advance
Plz
Samuel117 said:
hey bro i also have same problem and my phone everytime stuck on bootloop but i am out of town now so is there any to flash stock rom using cwm
Thanks in advance
Click to expand...
Click to collapse
Not any reply plz reply guys i need help
Hey I'm using Windows 8.1 pro... so any help?????
---------- Post added at 09:34 PM ---------- Previous post was at 09:30 PM ----------
Samuel117 said:
Not any reply plz reply guys i need help
Click to expand...
Click to collapse
How did you get into that problem?????
and can you describe in detail?
Using fastboot
rahulbasu2013 said:
Hey I'm using Windows 8.1 pro... so any help?????
---------- Post added at 09:34 PM ---------- Previous post was at 09:30 PM ----------
How did you get into that problem?????
and can you describe in detail?
Click to expand...
Click to collapse
i tried fastboot but not any keys work when i tried to go back so i remove my phone battery and when i put battery again and tried to switch on it stucked on bootlogo
Samuel117 said:
i tried fastboot but not any keys work when i tried to go back so i remove my phone battery and when i put battery again and tried to switch on it stucked on bootlogo
Click to expand...
Click to collapse
did you try the unbricking guide??? did that help??
No
rahulbasu2013 said:
did you try the unbricking guide??? did that help??
Click to expand...
Click to collapse
cant able to use those step out of town now not have pc here
It didn't Work.
I did everything correctly, the green circle appeared, still stuck on bootloop. HELP PLZ.
bluetooth not working
hey guyz i have installed custom rom lewa os5 in my canvas a110q, every things works fine but bluetooth is not working. is it rom problem or something else. is there any solution for this? kindly reply me [email protected] thnx.
anyone helpme frnds
i installed kitkat rom and now my phone is gets bugging when i lock phn it wont unlock again display was not coming
what i want to do???????????
sai teja badri said:
i installed kitkat rom and now my phone is gets bugging when i lock phn it wont unlock again display was not coming
what i want to do???????????
Click to expand...
Click to collapse
Flash v1 and then flash any rom or uboot.bin of v1 via sp tools
Sent from my C2305 using Tapatalk
guyz it cnat detect my phone on device manager....
in other devices in device manager...it shows micromax a110q and the phone just boots ....
plz help
What happened is that, i haven't rooted my phone yet and out of no where it goes into bootloop.
I followed all the steps from installing the drivers - till getting the green circle, but no success
Can you please help me?
Will it help ?
I have the same problem on Phone stuck on boot up....
I Never did any rooting/other software updates to my mobile.
The Problem started when a message like "some XYZ process has stopped"
I clicked OK but the message came 1 after the other many times so I though of rebooting mobile.... I gave reboot option and the problem raised and the phone never did start up. I tried factory reset but still the same........A friend suggested me this But i still want to confirm is it harmless to use this and is this the proper technique for my problem ?
Please Help Me....
Related
hello guy's
i made a custom rom for galaxy pro
deodxed and rooted & init.d support for GB 2.3.6
and we will use galaxy mini cwm 5.0.2.6 (it's work 100%)
and also custom boot.img
How to use cwm?
use odin to flash cwm recovery and boot.img
as one package and don't forget to use BENNETT_v1.0_2.ops
we can't use cwm by volume or home button
Q=UP : T=DOWN : Z=ENTER : POWER=BACK
AND YOU CAN MAKE BACKUP AND RESTORE
to flash the custom rom you have to mount system and cache and data
after flash the rom you have to make wipe data /reset and wipe cache and wipe dalvik cache
Download boot.img
http://www.mediafire.com/file/3uho1syl5z1j1ls/boot.tar.md5
Download custom rom
http://www.mediafire.com/file/z5y85ffo4kf0ce4/GT-B7510.zip
Download recovery
http://www.mediafire.com/file/7s4ompc1m6jpsuc/recovery.tar.md5
i hope galaxy mini devs to help us
sure i'm not Responsible for any damage
this is great!! but im having trouble when flashing recovery
luy991 said:
this is great!! but im having trouble when flashing recovery
Click to expand...
Click to collapse
use odin to flash recovery and use file attachment unrar it
flash as one package
Hi,
Could you please post more info about the rom, like known issues, whats working and whats not, a2sd scripts to use.
Thanks.
any hopes for multitouch????
is this cyanogen mod??
Detailed installation instructions & screenshots plz
Would be great if you could provide detailed installation instructions & ROM info and screenshots please...
Has anyone ever try that rom? No information ,no pictures. Nothing ... Just explanation and download link
success
Hello everyone!
I tried to install cwm-recovery (for Galaxy Mini) and author's firmware and that was successful.
I had:
1. Odin v4.38.
2. Stock firmware (Android 2.3.6) rooted by "universal_gb_root_v19.zip".
3. Installed application "Quick Boot (Reboot)" (You can find in Google Play Store).
I did (my way):
1. Power off phone.
2. Long press "Q"+"Power button" (you will see picture with text "Downloading...").
3. Press button "OPS" and select BENNET file.
4. Press button "BOOT" and select "boot.tar.md5" (you will see error, but it's normal).
5. Press button "One Package" and select "recovery.tar.md5".
6. Select checkbox "One Package".
7. Press button "Start" and wait.
8. Phone will be reboot.
9. Launch on the phone application "Quick Boot" and press "Recovery".
10. Phone will be loaded in "CWM Recovery".
11. You can flash author's firmware "GT-B7510.zip" (WARNING: don't work Wi-Fi after flashing!!!)
gnomba said:
Hello everyone!
I tried to install cwm-recovery (for Galaxy Mini) and author's firmware and that was successful.
I had:
1. Odin v4.38.
2. Stock firmware (Android 2.3.6) rooted by "universal_gb_root_v19.zip".
3. Installed application "Quick Boot (Reboot)" (You can find in Google Play Store).
I did (my way):
1. Power off phone.
2. Long press "Q"+"Power button" (you will see picture with text "Downloading...").
3. Press button "OPS" and select BENNET file.
4. Press button "BOOT" and select "boot.tar.md5" (you will see error, but it's normal).
5. Press button "One Package" and select "recovery.tar.md5".
6. Select checkbox "One Package".
7. Press button "Start" and wait.
8. Phone will be reboot.
9. Launch on the phone application "Quick Boot" and press "Recovery".
10. Phone will be loaded in "CWM Recovery".
11. You can flash author's firmware "GT-B7510.zip" (WARNING: don't work Wi-Fi after flashing!!!)
Click to expand...
Click to collapse
So that means that no more Wifi fr the Galaxy PRO, so is that no worth, is it?
So flashing that ROM, is just a waste coz no more Wifi mmmm I don't know what to do... D:
kevin_uzumaki said:
So that means that no more Wifi fr the Galaxy PRO, so is that no worth, is it?
So flashing that ROM, is just a waste coz no more Wifi mmmm I don't know what to do... D:
Click to expand...
Click to collapse
I just tried author's method. I was interested in installing CWM and possibility installing from CWM.
So...
gnomba said:
I just tried author's method. I was interested in installing CWM and possibility installing from CWM.
Click to expand...
Click to collapse
So you jsut have the CWM and not a Custom ROM you have the offical and is root, I need some help i don't find anything fr this Smartphone, I had already Flask Xperia's and the SGS that I had but this one... I have no idea D:
HELP PLEASE D:
has anyone done this succesfully without any issues?
custom rom flash
gnomba said:
I just tried author's method. I was interested in installing CWM and possibility installing from CWM.
Click to expand...
Click to collapse
cwm is working fine but after following the steps before and after flashing i am not able to acquire root privelages for any root app(titanium backup) please help me with this:crying:
---------- Post added at 01:23 PM ---------- Previous post was at 01:11 PM ----------
malcolm_cg said:
has anyone done this succesfully without any issues?
Click to expand...
Click to collapse
tried but cannot acquire root privelages for titanium backup and other root apps
is the wifi issue fixed yet?
or have you stopped development?
you could always ask for some devs help
gtb-7510
i installed micromax a80 clockmod recovery in my gtb 7510 (galaxy pro)........its installed perfectly but when i re-started my.....phone......then it didn't came in any mode i.e not in download...or even in recovery mode........!
it is in dead condition.......plz tell me what 2 do ...??
because.....i almost tried every thing......but its not getting on....!
rsdanger said:
i installed micromax a80 clockmod recovery in my gtb 7510 (galaxy pro)........its installed perfectly but when i re-started my.....phone......then it didn't came in any mode i.e not in download...or even in recovery mode........!
it is in dead condition.......plz tell me what 2 do ...??
because.....i almost tried every thing......but its not getting on....!
Click to expand...
Click to collapse
1st que.
From where you got the idea to install clockwork mode of MICROMAX mobile into out galaxy pro??
There is 1st rule of flashing that roms,firmwares,recoveries made for some different phone should not be flashed into some different phone you are using.
So remember that from now on.
Now,
Your current problem.
You are sayin that is does not even start right?
If you connect it to charger, does it show battery logo on screen?
Like the logo we see when phone is switched off & we put it in charging?
sent from my samsung galaxy pro GT-B7510 using xda premium
Hi..similar error here can flash the original rom
i kinda screwed up my Galaxy pro too..i flashed a false rom now..i cant even get my battery charging,download mode etc screens..
but when i hold volume dowm + power+ Q keys for 10 seconds..the phone detects on a computer..all i get is samsung CDMA technologies,modem and serial diag port...also samung usb composite port...
Odin detects the com mpping ..when i start to flash..the process gets stuck on setup connection....
adb doesnt detect it...
power +e and power + r also detected on pc..but no display on pc....
how will i restore my phone...its partially detected on pc!!!
essuraj said:
i kinda screwed up my Galaxy pro too..i flashed a false rom now..i cant even get my battery charging,download mode etc screens..
but when i hold volume dowm + power+ Q keys for 10 seconds..the phone detects on a computer..all i get is samsung CDMA technologies,modem and serial diag port...also samung usb composite port...
Odin detects the com mpping ..when i start to flash..the process gets stuck on setup connection....
adb doesnt detect it...
power +e and power + r also detected on pc..but no display on pc....
how will i restore my phone...its partially detected on pc!!!
Click to expand...
Click to collapse
Well, m inclined to think that ur device is bricked...
If odin cant flash the stock firmware, then i think there is very less you can do.
Is your warranty still available?
I mean is your galaxy pro still under 1 year of purchase?
If so, then you can immediatly rush to samsung customer service centre for best solution.
If you want to try something by yourself,
Then there is 1 method.
I read about it long long ago.
So not sure of it.
It was called something like "usg jig" or "jtag"..not sure though..u can google it if you want to search more on it..
Bt my advice would be to go to customer care if it is in 1 yr of purchase..
sent from my samsung galaxy pro GT-B7510 using xda premium
omg.....nothing else is possible?
well im out of warrenty..and the customer care people say they have to replace the whole motherboard whch costs to 3500Rs..
so i gave up...i tried to explain them it was a software issue but they dont understand....
and i thought the jtag was to get into download mode...where can i get that in india??
essuraj said:
well im out of warrenty..and the customer care people say they have to replace the whole motherboard whch costs to 3500Rs..
so i gave up...i tried to explain them it was a software issue but they dont understand....
and i thought the jtag was to get into download mode...where can i get that in india??
Click to expand...
Click to collapse
Ohh, u r from india?
Nice, me too..
Well, 2 of my frends had their phone bricked..but both were in warranty..so they got device replacement/mother-board replacement for free..
N i knw its very hard to find jtag in india..
N also, i agree that though flashing is software issue, customer care ppl nly do mother-board replacement nly..
N somehow that works..
BTW, what exact error you get when you try to flash with odin?
N what are you trying to flash with odin now? Stock firmware right?
Which one?
sent from my samsung galaxy pro GT-B7510 using xda premium
Hello guys first all of all just forthe info Allwinner A10 tablet cant be hard bricked! You can always flash a livesuit.img and restore your tab back! We dont have the original liveusit.img of the tab but i manage to get back on stock with few steps and this method is confirmed and tested!!
Requirements -
ADB Drivers ( http://www.4shared.com/rar/NY7NE6wm/ADB_Drivers.html )
USB Mouse
Little Brain
Note : If you have CWM installed onyur tab you can simply Restore from your restored backup if you dont have one here it is
http://www.4shared.com/rar/t3ycEEpk/2012-09-25114926.html
Step 1 : - Download the software called Livesuit you can easily google it and find it but here's treat for you!
http://www.yarvik.com/userfiles/yarvikfirmware/YarvikLiveSuit.zip
Step 2 : - Download this image http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img
Step 3 : - Extract Livesuit software and open Livesuit.exe -- > Whataver pop-ups come just click no! -- > Click on select image and browse to the downloaded TAB461 .img and leave the software as it is
Step 4 : - Now connect your tablet ( make sure it is turned off not in recovery or something , you can do this by holding power button for long ) to the pc/laptop by holding back button! as soon as you attach usb , while holding back button press 'power' button 10 times repeatedly!
Wait and a pop up will come Click 'YES' 2 times it will take 2 mins to flash the image and u will soon boot up!
Step 5 :- Touch wont work on this image! So connect your wired mouse with OTG cable and install CWM and then the backup! as described below
http://www.facebook.com/l.php?u=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1906247&h=xAQG1BrKz
If having any problem comment below! i will solve it!
If u like my work....just hit THANKS
In spite of installing the adb drivers my device does not show please help
if i want to use this process to root my funbook P275, without back button, will it work?
Wifi not working..
after un brick my micromax P500..
wifi not working..
i thing wifi driver is missing.. plsssss help.....
---------- Post added at 02:18 PM ---------- Previous post was at 01:39 PM ----------
pls help bro....
plsss help....
hi bro.. i bricked my funbook pro.. and now i recover it but my wifi driver is missing.. now wifi is not working..
do u give me a idea where i got micromax P500 wifi driver..
Plss help.....
please help...!!!!
I too unbricked my funbook p500 ....
but after that my wifi is not working ..... i trid many rom but am not able to use wifi
pls help......
IMG of working P500 (without wifi problems)
cool.gautam said:
Hello guys first all of all just forthe info Allwinner A10 tablet cant be hard bricked! You can always flash a livesuit.img and restore your tab back! We dont have the original liveusit.img of the tab but i manage to get back on stock with few steps and this method is confirmed and tested!!
Requirements -
ADB Drivers ( http://www.4shared.com/rar/NY7NE6wm/ADB_Drivers.html )
USB Mouse
Little Brain
Note : If you have CWM installed onyur tab you can simply Restore from your restored backup if you dont have one here it is
http://www.4shared.com/rar/t3ycEEpk/2012-09-25114926.html
Step 1 : - Download the software called Livesuit you can easily google it and find it but here's treat for you!
http://www.yarvik.com/userfiles/yarvikfirmware/YarvikLiveSuit.zip
Step 2 : - Download this image http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img
Step 3 : - Extract Livesuit software and open Livesuit.exe -- > Whataver pop-ups come just click no! -- > Click on select image and browse to the downloaded TAB461 .img and leave the software as it is
Step 4 : - Now connect your tablet ( make sure it is turned off not in recovery or something , you can do this by holding power button for long ) to the pc/laptop by holding back button! as soon as you attach usb , while holding back button press 'power' button 10 times repeatedly!
Wait and a pop up will come Click 'YES' 2 times it will take 2 mins to flash the image and u will soon boot up!
Step 5 :- Touch wont work on this image! So connect your wired mouse with OTG cable and install CWM and then the backup! as described below
http://www.facebook.com/l.php?u=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1906247&h=xAQG1BrKz
If having any problem comment below! i will solve it!
If u like my work....just hit THANKS
Click to expand...
Click to collapse
Excuse me for asking big thing, but can you make a IMG file from your (or anyone) working funbookPro.
The livesuit wiped something related to wifi while using Yarvik image file. Since then the wifi isn't working. I managed to turn it on using some other Stock firmwares but its not able to get the IP address. ( tried http://www.curtisint.com/html/CustService/Manuals/PRO_PLT1044_FIRMWARE.ZIP, http://smartpad.mediacomeurope.it/Prodotti/Download.aspx?XRC=M-MP1010I and many other stock firmwares). Unless the source stock firmware is flashed seems the wifi is not going to work. Even the backup provided by you is unable to bring back the wifi. funbookpro is using some wifi chip which isn't present in most of the tablets. I've been struggling to get it back from few days. downloaded many Gigs still no luk
Thanks in advance.
---------- Post added at 02:04 PM ---------- Previous post was at 01:56 PM ----------
oh btw anyone who bricked their funbookpro can use the following firmwares with livesuit till we get an official firmware
Most of the firmwares wipe out the internal SD card. use only if u dont care about internal SD or if it is being shown as damaged.
The following are the images that worked for me..
http://www.kocaso.com/firmware/M1062_01.exe
http://www.curtisint.com/html/CustService/Manuals/PRO_PLT1044_FIRMWARE.ZIP
http://smartpad.mediacomeurope.it/Prodotti/Download.aspx?XRC=M-MP1010I
http://www.mediacomeurope.it/ZeusInc/PressRoom/Documents/1010i.zip
http://smartpad.mediacomeurope.it/Prodotti/Download.aspx?XRC=M-MP1010I
Some have problem while restoring the backup given by Gautam.
FunBook Pro similar firmware with other 3g dongles working (try this only on bricked)
M1062_01.exe This firmware is working great. I've tried couple of 3G dongles they are working fine. Screw photon + :laugh:
The downside is unable to use other updates like PowerTab_JB_V2_by_Joby. It just freezes at cyanogenmod logo. Oh yeah!!! it wipes out the Internal SD card as well. Still the firmware isn't a perfect match.
Touch screen not working
After unbricking, touch is not working, any ideas? Thanks
naneraja said:
After unbricking, touch is not working, any ideas? Thanks
Click to expand...
Click to collapse
Follow the step5 from the main post by cool.gautam
matrixbluestar said:
Follow the step5 from the main post by cool.gautam
Click to expand...
Click to collapse
Works now after reinstalling the backup. Thanks for the help
micromax p500
i have installed cwm recovery but nothing works in it no button works except power button and mouse is also not working and touch is also not working
please help.................
hey there..i need some serious help!!! my micromax a110 is not working:crying::crying: it so happened that my cell suddenly got switched off..n den when i tried to switch it on it didnt start. just the starting screen appears and then it goes dead..then again the starting screen appears and it goes dead:crying::crying::crying:..please help me!!!! someone??? anyone???
try getting into recovery (vol + or - and pwr) and make a full wipe. if it will not power on, try flashing a new firmware. make sure you got the right one!
if u have cwm added then try to go to recovery n flash any custom rom of C2
if not then
Flash Stock rom using Sp tool it will Solve ur problem
dewdrops said:
hey there..i need some serious help!!! my micromax a110 is not working:crying::crying: it so happened that my cell suddenly got switched off..n den when i tried to switch it on it didnt start. just the starting screen appears and then it goes dead..then again the starting screen appears and it goes dead:crying::crying::crying:..please help me!!!! someone??? anyone???
Click to expand...
Click to collapse
I think it's out of charge, just plug in the charger and see what happens..
yog12 said:
if u have cwm added then try to go to recovery n flash any custom rom of C2
if not then
Flash Stock rom using Sp tool it will Solve ur problem
Click to expand...
Click to collapse
i tried doing that but thats not working...can you please tell me the procedure?
Lets Start
dewdrops said:
i tried doing that but thats not working...can you please tell me the procedure?
Click to expand...
Click to collapse
1)Install Drivers.
2)Open SP tool
3)Select 'Android Scatter file' inside ROM folder.
4)Click Firmware->Upgrade Button.
5)Connect Phone{Switched off} to PC via USB Cable.
6If everythings right,Flashing will proceed..
7)Wait till It finishes..A green ring is displayed on completion..
8))Now Close SP tool..Remove Phone from PC..
9)Switch ON the phone...It is successfully Flashed...:laugh:
I also face same problem some time when I make Factory or DRM reset
Green Android Robo with rotating frame
Start again and again. No switch off .. No effect after remove battery..
Only 1 solution "Do flash with SP Tool"
dewdrops said:
i tried doing that but thats not working...can you please tell me the procedure?
Click to expand...
Click to collapse
Hey no worries.. just follow my dis thread 'unbrick bricked canvas 2' :thumbup:
Link: http://forum.xda-developers.com/showthread.php?t=2376667
hit thx if i helped...
ok first thing is my english is bad
- i have root my device via farma root with super SU
- today i install android kitkat them available on google play(first option in serach list for kitkat theme)
- after installation nothing happend and don't show open button on that page of google play.
- so i just restart my phone (without uninstalling that theme)
- when its starting it stuck on "CANVAS MAGNUS" logo screen
- i wait for 20 mins but it don't get start
- then i did factry reset from (by pressing power + vol. up buttons)
- still same problem
please give some solution. my phone is in warrenty periodes
K!!nG said:
ok first thing is my english is bad
- i have root my device via farma root with super SU
- today i install android kitkat them available on google play(first option in serach list for kitkat theme)
- after installation nothing happend and don't show open button on that page of google play.
- so i just restart my phone (without uninstalling that theme)
- when its starting it stuck on "CANVAS MAGNUS" logo screen
- i wait for 20 mins but it don't get start
- then i did factry reset from (by pressing power + vol. up buttons)
- still same problem
please give some solution. my phone is in warrenty periodes
Click to expand...
Click to collapse
Flash stock rom using sp tool or use CWM/TWRP to install any other custom rom. It will solve your problem.
Siddhesh.K15 said:
Flash stock rom using sp tool or use CWM/TWRP to install any other custom rom. It will solve your problem.
Click to expand...
Click to collapse
Use this!
Just one click!
ridelight said:
Use this!
Just one click!
Click to expand...
Click to collapse
@ridelight where is the link?
http://forum.xda-developers.com/canvas-magnus/development/micromax-stock-install-one-click-t2758619
Siddhesh.K15 said:
Flash stock rom using sp tool or use CWM/TWRP to install any other custom rom. It will solve your problem.
Click to expand...
Click to collapse
Thanx for solution..
It works gr8 .
Btw.
what is CWM/TWRP??
ridelight said:
http://forum.xda-developers.com/canvas-magnus/development/micromax-stock-install-one-click-t2758619
Click to expand...
Click to collapse
Thnx for stom rom
But its not original
I want original if i get my warrenty back
K!!nG said:
Thanx for solution..
It works gr8 .
Btw.
what is CWM/TWRP??
Click to expand...
Click to collapse
Cwm &Twrp are the custom recoveries using which we can install different custom roms, mods and any which requires root and that's available in zip format can be installed using Cwm\Twrp. And don't just say thanks hit thanks button also , it won't cost you
---------- Post added at 07:45 PM ---------- Previous post was at 07:44 PM ----------
K!!nG said:
Thnx for stom rom
But its not original
I want original if i get my warrenty back
Click to expand...
Click to collapse
Download official rom from this site LINK
Siddhesh.K15 said:
Cwm &Twrp are the custom recoveries using which we can install different custom roms, mods and any which requires root and that's available in zip format can be installed using Cwm\Twrp. And don't just say thanks hit thanks button also , it won't cost you
---------- Post added at 07:45 PM ---------- Previous post was at 07:44 PM ----------
Download official rom from this site
Click to expand...
Click to collapse
Thnx for link but it say File busy
And ask for premium id
i m not a richy rich for premium id's
But thnx for link
And
I can't hit thnx twice in single post i think so.
Its the original rom, only bootlogo chenged by me, the rom is the stock one.
---------- Post added at 09:27 AM ---------- Previous post was at 09:26 AM ----------
Chang rom wiont void hardware warranty
@K!!nG
The link i gave u before is often busy coz of server load.
Dont know what are you saying about "Thanks" but here is the working link of stock rom tested ok
https://drive.google.com/uc?id=0B_nouTN5y1w7S0pGZDVmd2h6S0k
Sent from my Micromax A117 using XDA Premium 4 mobile app
same problem
when i have done a full reset and then tried to restore the applications of my smartphone with the help of titanium backup the problem of hanging on boot screen have arouse on my phone.
will stock ROM will help me in my case too.
reply please, since i am in urgent need of my smartphone.
Try Sp tooling
Have u try SP tooling...it will work 100% bro:good:
thanks
Sek her said:
Have u try SP tooling...it will work 100% bro:good:
Click to expand...
Click to collapse
the custom rom worked perfectly:laugh::laugh:
same problem
K!!nG said:
ok first thing is my english is bad
- i have root my device via farma root with super SU
- today i install android kitkat them available on google play(first option in serach list for kitkat theme)
- after installation nothing happend and don't show open button on that page of google play.
- so i just restart my phone (without uninstalling that theme)
- when its starting it stuck on "CANVAS MAGNUS" logo screen
- i wait for 20 mins but it don't get start
- then i did factry reset from (by pressing power + vol. up buttons)
- still same problem
please give some solution. my phone is in warrenty periodes
Click to expand...
Click to collapse
helo dear,
I did the same. I go to Recovery option and do REBOOT without doing anything. After that it struck on welcome screen. Unfortunately USB Debugging is not ON. Screen hang on with logo CANVAS MAGNUS.
How can i get rid of this problem. pls reply
---------- Post added at 01:06 PM ---------- Previous post was at 12:41 PM ----------
Dear all
my canvas magnus screen hangs on CANVAS MAGNUS logo when starts. Unfortunately USB Debugging is OFF.
This haapened when i rooted my phone and the go to System recovery (volume=power), then i REBOOT my phone.
After that it is getting struck of when logo comes on screen.
pls tell how can i solve this problem. Waiting keenly as i am not able to use my phone.
It is better to flash stock ROM using SP Tools. If you dont know the process, then search about SP Tools and flashing instructions in XDA.
Hello, I am new on XDA Forums and I have a problem and I am sure that XDA Developers will help me,
Yesterday I rooted my LG G Pro Lite Dual D686 Android 4.4.2 by VRoot then I replaced the Chinese Superuser with English SuperSu, anyway I installed fonts program and while setting a font my phone shutted down suddenly, I trying to reboot, it stucks on the logo screen
some people says its called bootloop or android brick I don't know.. all what I want is fixing my problem at home and not going to anywhere because if my parents knew, it will be the end of my life, I tried to go to recovery mode by holding down volume button and power button and when the logo appears I reset the power button then select and hold it again, it asked me if I want to reset settings, I said yes and reseted my settings but still the problem occurs.
If you have a solution please inform me about it, waiting for your answers.
Have you tried flashing a new stock ROM ?
By kdz of course.
Sent from my SM-N910C using XDA Free mobile app
---------- Post added at 01:40 PM ---------- Previous post was at 01:28 PM ----------
Fouad Hamdy said:
Hello, I am new on XDA Forums and I have a problem and I am sure that XDA Developers will help me,
Yesterday I rooted my LG G Pro Lite Dual D686 Android 4.4.2 by VRoot then I replaced the Chinese Superuser with English SuperSu, anyway I installed fonts program and while setting a font my phone shutted down suddenly, I trying to reboot, it stucks on the logo screen
some people says its called bootloop or android brick I don't know.. all what I want is fixing my problem at home and not going to anywhere because if my parents knew, it will be the end of my life, I tried to go to recovery mode by holding down volume button and power button and when the logo appears I reset the power button then select and hold it again, it asked me if I want to reset settings, I said yes and reseted my settings but still the problem occurs.
If you have a solution please inform me about it, waiting for your answers.
Click to expand...
Click to collapse
Go HERE !!! you might fix your phone.
http://forum.xda-developers.com/showthread.php?t=2594480
Rohan El Matador said:
Have you tried flashing a new stock ROM ?
By kdz of course.
Sent from my SM-N910C using XDA Free mobile app
Click to expand...
Click to collapse
I actually don't understand what is flashing a new stock ROM and what is ROM..
please tell me what is it and tell me the steps of how to do it.
I succeed in entering the download mode on my LG G Pro
but the drivers doesn't install on my computer, I already installed LGUnitedMobileDrivers but I still cannot see my mobile disk on the computer..
Fouad Hamdy said:
I succeed in entering the download mode on my LG G Pro
but the drivers doesn't install on my computer, I already installed LGUnitedMobileDrivers but I still cannot see my mobile disk on the computer..
Click to expand...
Click to collapse
Wait im writing the steps be patient beccause i'm searching for the links.
Fouad Hamdy said:
Where and how to download my mobile kdz file?
also what shall I select in the flashtool? Normal Flash or CSE flash
Click to expand...
Click to collapse
Step 1 : Dowload LG United Drivers >> http://www.mediafire.com/download/8...981MAN38AP22_ML_WHQL_Ver_3.8.1(0)_4.9.8.1.zip
Install it.
Step 2 : Download LG Mobile Support Tool >> https://docs.google.com/file/d/0B0nq1tbSSc_gRk5ObE1ucm1SSHM/edit?pli=1
Extract it.
Step 3 : Choose your kdz file to download here >> http://www.lg-phone-firmware.com/index.php?id_mod=38
If you were using v10 baseband choose v10
If v20 choose v20
Choose according to your country or the nearest country.
Note : do not extract the kdz file or it will break the file.
Step 4 : Put your LG G Pro lite into Emergency Mode by switching it off,
After the phone is off then hold the Volume Down or Up ( I dnt rememnber so try only one either Up Or Down. Your screen will be yellow an says emrgency mode ) wait for the drivers to finish loading on your if doing it for the first time.
After that open The Kdz Updater file you extracted in step 2.
Then Run KDZ_FW_UPD as administrator.
See the screenshot below.
If there is error msg at the end forget it.
The program will stop responding its normal wait for it
and if it says close program close it.
Reboot your phone manually.
Else
If their is no error msg your phone will restart normally.
Note : Im not responsible for any damage. Its on your own risk. Just trying to help you.
If you follow these steps properly everything will work fine.
Hope it helped.
Rohan El Matador said:
Step 1 : Dowload LG United Drivers >>
Install it.
Step 2 : Download LG Mobile Support Tool >>
Extract it.
Step 3 : Choose your kdz file to download here >>
If you were using v10 baseband choose v10
If v20 choose v20
Choose according to your country or the nearest country.
Note : do not extract the kdz file or it will break the file.
Step 4 : Put your LG G Pro lite into Emergency Mode by switching it off,
After the phone is off then hold the Volume Down or Up ( I dnt rememnber so try only one either Up Or Down. Your screen will be yellow an says emrgency mode ) wait for the drivers to finish loading on your if doing it for the first time.
After that open The Kdz Updater file you extracted in step 2.
Then Run KDZ_FW_UPD as administrator.
See the screenshot below.
If there is error msg at the end forget it.
The program will stop responding its normal wait for it
and if it says close program close it.
Reboot your phone manually.
Else
If their is no error msg your phone will restart normally.
Note : Im not responsible for any damage. Its on your own risk. Just trying to help you.
If you follow these steps properly everything will work fine.
Hope it helped.
Click to expand...
Click to collapse
What is V10 and V20? and wtf is baseband, explain please.
Anybody please help!
IN THIS HUGE SITE/FORUM THERE IS NO ANY PERSON TO HELP?
I downloaded V20B
but as you said, it gives me program stopped working error, I rebooted my mobile and started download mod (emergency mode doesn't work..) but still gives me the error, I am using the LGFlashTool in the topic u provided at the first, I used ur program but gives error too even when I reboot
REMEMBER, MY PHONE DOESN'T EVEN OPEN, ITS STUCK ON THE LOGO SCREEN (BRICKED)
Forget aboutd baseband. Do you remember what firmware your phone was using. In the "about device" v20(A,B....) or v10(A,B....). If you know it tell me.Otherwise i wont be able to help you.
Sent from my SM-N910C using XDA Free mobile app
---------- Post added at 08:18 PM ---------- Previous post was at 07:46 PM ----------
Fouad Hamdy said:
What is V10 and V20? and wtf is baseband, explain please.
Click to expand...
Click to collapse
i made a mistake.
v10 and v20 are the firmware versions of your phone.
baseband consist of radio and mobile signal that enables you to communicate.
---------- Post added at 08:32 PM ---------- Previous post was at 08:18 PM ----------
Fouad Hamdy said:
I downloaded V20B
but as you said, it gives me program stopped working error, I rebooted my mobile and started download mod (emergency mode doesn't work..) but still gives me the error, I am using the LGFlashTool in the topic u provided at the first, I used ur program but gives error too even when I reboot
REMEMBER, MY PHONE DOESN'T EVEN OPEN, ITS STUCK ON THE LOGO SCREEN (BRICKED)
Click to expand...
Click to collapse
I forget to mention in step 4. After turning off the phone remove the battery. The hold volume down key and conect the usb cable in your pc first and then to your phone. Do not release the volume down key until you get emergency mode.
After updrage the pc program will crash and it will dispaly close program dialog.
close it and remove your usb and insert your baterry.
Now your phone should boot up. It will take some time plz be patient.