Database Info

UBISLATE 7C+ Stock Rom and Flash Tool

Hello Everyone Sorry for Delay i was out of City so... thats why.. i was not able to share or update it..
So now wait is over i got Ubislate 7c+ Full Stock ROM from Datawind office and Livesuit to flash. So now you can try to build custom rom and can try other rom's and can test it..
Here is the UBISlate Datawind Stock ROm
Click Here to Download UBISLATE 7C+ Stock Rom
Click here to download LiveSuit Flasher
Step by Step Guide
1. Put Your Ubislate off means complete power off
2. Run Livesuite
3. Select/Open UBI Slate stock Img File
4. Plug oneside of Data cable to computer only to computer not with Tablet (rember)
5. Now keep pressing and holding Volume up+ button and now attach data cable with tablet ( UBISLATE)
6. Now Popup of live suite will say Yes and again Yes press yes both times and ... release the volume up+ button
7. Now update will start.... wait for 5 min
8. 100% up gradation complete
:good:Now enjoy your UBISLATE ONCE AGAIN ENJOY
Enjoy Just

Uploaded or not?
What Happend Brother ,,uploading complete or not?

What a good news you got!
Now if you're telling us all truth, and this is original firmware, then this device is now un-brickable. In case of bootloop, we can go to flash mode with some pin and key combination and flash back to stock. And in case bootloader failed to load (hard brick), this device automatically goes to flash mode (kinda fail safe) and we can get back our working device. This is all because of Allwinner A13 board. It's not a work of Datawind.
Another thing is that, I can start development, because I know there way to recover back.
I hope you really got the firmware and you'll upload it soon.
Thank you.

Hello Friends for those with stuck on android n forgotten password
TRY >> http://j.gs/205J
it helped me
n please comment if it helps u to
ENJOY

ubislate 7c + rom
simars said:
Hello Every...
So now wait is over i got Ubislate 7c+ Full Stock ROM from Datawind office and Livesuit to flash. So now you can try to build custom rom and can try other rom's and can test it..
Here is the UBISlate Datawind Stock ROm
Uploading Please wait it will take 1 Hour around 240Mb
Enjoy Just
Click to expand...
Click to collapse
Where is your upload man???
Have you uploaded or not?
I got same problem, device is not booting only datawind logo
on the screen. I told about it to datawind, they said that they
Will send me link for rom zip, I asked "device is not booting then
How to possible to insert zip file into device "
they told " card should be formatted where zip pasted, then you
Can use that file "
But they didn't send me any mail in 24 hours.
Info for developer .....thanks

ahirwar said:
Where is your upload man???
Have you uploaded or not?
I got same problem, device is not booting only datawind logo
on the screen. I told about it to datawind, they said that they
Will send me link for rom zip, I asked "device is not booting then
How to possible to insert zip file into device "
they told " card should be formatted where zip pasted, then you
Can use that file "
But they didn't send me any mail in 24 hours.
Info for developer .....thanks
Click to expand...
Click to collapse
yea there are 2 way for flashing
one is flashing using livesuite (this is flashed with fone off-in download mode)
second is by recovery software
just do as instructed in my link or wait for the datawind to send u the file n flash it using livesuite
*NOTE* u should know that tab can connect to pc when the tab is stuck on loading image *

fkardame said:
yea there are 2 way for flashing
one is flashing using livesuite (this is flashed with fone off-in download mode)
second is by recovery software
just do as instructed in my link or wait for the datawind to send u the file n flash it using livesuite
*NOTE* u should know that tab can connect to pc when the tab is stuck on loading image *
Click to expand...
Click to collapse
Have you got any rom for ubislate 7c + ???
If you have .... where is it?

ahirwar said:
Have you got any rom for ubislate 7c + ???
If you have .... where is it?
Click to expand...
Click to collapse
as i said go to this link >>> http://j.gs/205J
n read it n do as it says

fkardame said:
as i said go to this link >>> http://j.gs/205J
n read it n do as it says
Click to expand...
Click to collapse
I want to say something to you, first your link
Is not working, second if you really know
About android then you should give real
link. Third this forum not for your advertising
This is for development so no need to put
advertise link, only put direct link ok Mr.

See here: http://forum.xda-developers.com/showpost.php?p=39546159&postcount=116
That person reported to got stock firmware along with proper instruction to make a bootable SDCard.
Direct Link for the firmware: https://www.dropbox.com/sh/aywf02dd0y2qp2k/Ao2v2JZxvC
Edit: That's original Stock firmware for Ubislate7C+, see explanation here: http://forum.xda-developers.com/showpost.php?p=39623084&postcount=130

ahirwar said:
I want to say something to you, first your link
Is not working, second if you really know
About android then you should give real
link. Third this forum not for your advertising
This is for development so no need to put
advertise link, only put direct link ok Mr.
Click to expand...
Click to collapse
try this >>> http://fkardame.blogspot.in/p/ubislate-7c.html
or find on ur own
enjoy n learn to request not order

callingmedic911 said:
See here: http://forum.xda-developers.com/showpost.php?p=39546159&postcount=116
That person reported to got stock firmware along with proper instruction to make a bootable SDCard.
Direct Link for the firmware: https://www.dropbox.com/sh/aywf02dd0y2qp2k/Ao2v2JZxvC
Edit: That's original Stock firmware for Ubislate7C+, see explanation here: http://forum.xda-developers.com/showpost.php?p=39623084&postcount=130
Click to expand...
Click to collapse
thanks brother for helping me.
I would like to ask one question
Is that original firmware? Because its name is
Wifi8188 something.
.

ahirwar said:
thanks brother for helping me.
I would like to ask one question
Is that original firmware? Because its name is
Wifi8188 something.
.
Click to expand...
Click to collapse
Yes, that is original firmware for Ubislate7C+, please read my explanation (I have explained and proved that is stock firmware). Also, after flashing that file, you will have no longer Datawind's pre-installed (All sh*ty apps, so nothing to worry about).
That name looks weird because, it was automatically generated by compiler according to boards/configuration/driver etc, and looks like Datawind didn't had time to rename that file.
BTW Flash it, you'll have no problems.

callingmedic911 said:
Yes, that is original firmware for Ubislate7C+, please read my explanation (I have explained and proved that is stock firmware). Also, after flashing that file, you will have no longer Datawind's pre-installed (All sh*ty apps, so nothing to worry about).
That name looks weird because, it was automatically generated by compiler according to boards/configuration/driver etc, and looks like Datawind didn't had time to rename that file.
BTW Flash it, you'll have no problems.
Click to expand...
Click to collapse
Phoenixcard not working it stuck after burn MBR.
any suggestion????

ahirwar said:
Phoenixcard not working it stuck after burn MBR.
any suggestion????
Click to expand...
Click to collapse
u can use livesuite n flash that img file u got from the dropbox directly
1. install livesuite drivers
2. open livesuite n select that file u got .
3. press n hold vol down button n insert the usb cable n keep pressing power button till u get warning on ur comp screen
4. press yes n yes
5. it will start flashing
Simple Done
n for ur information that 8188 means it has wifi of rtl8188 n if in case u have rtl 8150 then ur wifi wont work
so try to make a backup of ur device using cwm recovery

Updating Please Wait for 10 Mins
simars said:
Hello Every...
So now wait is over i got Ubislate 7c+ Full Stock ROM from Datawind office and Livesuit to flash. So now you can try to build custom rom and can try other rom's and can test it..
Here is the UBISlate Datawind Stock ROm
Uploading Please wait it will take 1 Hour around 240Mb
Enjoy Just
Click to expand...
Click to collapse
Updating Dear Please wait for 10 mins more

fkardame said:
u can use livesuite n flash that img file u got from the dropbox directly
1. install livesuite drivers
2. open livesuite n select that file u got .
3. press n hold vol down button n insert the usb cable n keep pressing power button till u get warning on ur comp screen
4. press yes n yes
5. it will start flashing
Simple Done
n for ur information that 8188 means it has wifi of rtl8188 n if in case u have rtl 8150 then ur wifi wont work
so try to make a backup of ur device using cwm recovery
Click to expand...
Click to collapse
Boss please give me livesuit and cwm recovery link.
And instruction for install cwm recovery .
I installed successfully stock rom via phoenixcard.
Thanks in advance

ahirwar said:
Phoenixcard not working it stuck after burn MBR.
any suggestion????
Click to expand...
Click to collapse
What is the size of your SDCard? And how're you connecting your SDCard to your PC?
---------- Post added at 09:06 PM ---------- Previous post was at 08:56 PM ----------
fkardame said:
if in case u have rtl 8150 then ur wifi wont work
Click to expand...
Click to collapse
How can same device model have different WiFi boards?

callingmedic911 said:
What is the size of your SDCard? And how're you connecting your SDCard to your PC?
---------- Post added at 09:06 PM ---------- Previous post was at 08:56 PM ----------
How can same device model have different WiFi boards?
Click to expand...
Click to collapse
it does have coz its made with few different manufacturers coz the quantity ordered is very high
so it depends on the manufacturer .. what drivers n hardware they use
but the base is all the same like it has allwinner a13 processor
n allwinner13 support 3 different touchpanel drivers too
n 2 wlan driver n 3-4 sensor drivers n 2 diff camera driver
so all the best with using the file
i had one ubislate without sim i almost downloaded 44 flash files n got the right one finally
coz in some touch was not working in some camera in some sensor
but finally got the right file... thats what my experience says
take care n be safe before flashing as u can take the backup of ur device before flashing the given file
---------- Post added at 01:16 PM ---------- Previous post was at 01:10 PM ----------
ahirwar said:
Boss please give me livesuit and cwm recovery link.
And instruction for install cwm recovery .
I installed successfully stock rom via phoenixcard.
Thanks in advance
Click to expand...
Click to collapse
livesuite link >>> http://j.gs/2184 (Skip ad)
cwm recovery link >>> http://j.gs/205Z(skip ad)
n method to
Method:
1: Connect the tab to pc n install driver
2: Start the tab n activate usb debugg in tur tab
3: Flash Cwm recovery by clicking recovery for ics and follow the instruction
4: Click reboot to recovery.

ubislate 7c+
adb is not working in ubislate 7c+ ,
Already installed sdk adb in my pc. But adb not recognized
Ubislate 7c+ . Datawind don't care about customer problem.
it stucks on datawind logo

[Q] Micromax a35

On my micromax a35 Bolt(rooted) apps are crashing frequently. The crash error does not come up but the app restarts suddenly while opening someting, like the Gallery app- after opening certain pictures it will restart and went back to starting page...
Someone told me to clear my Rom Cache but I dont know how since the stock recovery does not have the function..And custom recovery is not available for my device.. Please help me!!:crying:

This phone has a very low ram available so many app crash and slow down the phone..
---------- Post added at 07:52 PM ---------- Previous post was at 07:49 PM ----------
Hey recovery is available for your phone...
follow this.. http://forum.xda-developers.com/showthread.php?t=2191328
press thanks if i helped..

problems with cwm
hey brother
i have rooted the phone and successfully flashed cwm...but :
1. the cwm cant boot manually...i have to boot it from rom manager
2. i cant take nandroid backup....it bricks d damn device every time i try..
3. i have even tried reflashing it...same results...help me dude...

[Q] Not able to get the main screen post flashing

Hello Everyone,
Please let me know the procedure of getting main screen for Glaxy Ace Plus. I have performed the clock mode recovery which is got successfully installed, now when I am trying to get into main screen, it shows the menu of recovery....
Please help me on this.
Thanks..
Samir:silly:

samir_k007 said:
Hello Everyone,
Please let me know the procedure of getting main screen for Glaxy Ace Plus. I have performed the clock mode recovery which is got successfully installed, now when I am trying to get into main screen, it shows the menu of recovery....
Please help me on this.
Thanks..
Samir:silly:
Click to expand...
Click to collapse
pls explain in detail what you are trying to say !!
ohhk
i somewhat got what you are trying to say
your phone is going in recovery mode on start
it is a bootloop situation
download twrp recovery
or latest cwm
and the issue will be gone
---------- Post added at 05:39 PM ---------- Previous post was at 05:37 PM ----------
samir_k007 said:
Hello Everyone,
Please let me know the procedure of getting main screen for Glaxy Ace Plus. I have performed the clock mode recovery which is got successfully installed, now when I am trying to get into main screen, it shows the menu of recovery....
Please help me on this.
Thanks..
Samir:silly:
Click to expand...
Click to collapse
link for twrp
flash this in odin !!!

samir_k007 said:
Hello Everyone,
Please let me know the procedure of getting main screen for Glaxy Ace Plus. I have performed the clock mode recovery which is got successfully installed, now when I am trying to get into main screen, it shows the menu of recovery....
Please help me on this.
Thanks..
Samir:silly:
Click to expand...
Click to collapse
I'm assuming that you got recoceryloop , the phone always boots into CWM Recovery.
Re-flash Stock ROM with ODIN .Re-root your phone , instead of CWM , install TWRP (given by vickyg.coolest , above^)
And you're free .(at least this is the method I did in this case)
Sent from my GT-S7500 using xda premium

Go here
http://forum.xda-developers.com/showthread.php?t=2361078
Choose any one method
Follow the instructions
Done
sent by typing by my fingers

[Hi, can you provide me the link to download the setup....
Thanks,
Samir

samir_k007 said:
[Hi, can you provide me the link to download the setup....
Thanks,
Samir
Click to expand...
Click to collapse
Which setup?
The odin setup link is already in the link i have given you
Check it out
sent by typing by my fingers

[Guide] How to Unbrick Micromax Canvas 2 Plus A110Q

Hi everyone, this is a guide that help you to unbrick Micromax Canvas 2 Plus A110Q.
Follow all the steps carefully
1. Download the stock rom v1 from here . Do not download stock rom v2 from anywhere, that rom contain many bugs.
2. Download sp flash tools form here. (tool needed for flashing rom on the device)
3. Download USB drivers from here
Now you need to install the usb preloader drivers you just downlaoded.
To install the drivers:-
1.Extract the USB drivers.rar file.
2.Switch off your phone
3.Open device manager(search for "Device Manager") or click on computer properties , then device manager..
4.Connect your phone in OFF state
5.There will be a device named "mt65xx preloader" which will be there for some seconds.
You need to be quick at this. As soon as it is displayed, right click and click update driver.
Browse manually the files from usb drivers you extracted.
NOTE: THIS METHOD WILL NOT WORK ON WINDOWS 8
Now, if you are using windows 8 do this to install the drivers:
1. Dwonlaod the usb driver.rar file.
2. Hover pointer to Top Right corner of your screen, choose Settings from sidebar
3.Click last option "Change PC Settings"
4.Select "General"
5.Scroll to end and find "Restart Now" under "Advanced Startup". PC Will be in troubleshoot mode now
6.Once screen is back, select option "Troubleshoot"
7.Select "Advanced Options"
8.Select "Startup Settings"
9.Select "Restart"
Now important step. There will be several options to select from. You need to select "Option 7". For this press "7" key from number pad.
After your PC starts, follow above steps.
10. Choose the win 7 file from usb drivers.rar file to install drivers on windows 8 .
Now,
4. Extract ROM and Flash Tool
5. Open Flash_tool.exe from SP_FLASH Tools.
6.Select "Scatter-loading" and select "MT6589_Android_scatter_emmc.txt" from ROM folder
7.Select "Download" option, it will search for phone now.(if does not detect your phone pull the battery out and put it in again.)
8.Switch OFF the phone.
9.Connect it with USB (in OFF state only) (proper divers must be installed as said above)
10.If all goes well you'll see data transfer. At the end there will be Green Circle in middle of screen which means ROM is flashed.(don't panic if there is no green circle just let it work for 10 minutes and unplug your phone from computer.)
11.Remove phone, Switch it ON.

Thanks
Thanks for this guide. I think I bricked my Canvas2+. So I'm trying this now.

I tried this and it worked. Successfully unbricked my phone.
Sent from my IQ446 Magic using Tapatalk

supersapien said:
Thanks for this guide. I think I bricked my Canvas2+. So I'm trying this now.
Click to expand...
Click to collapse
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
---------- Post added at 10:39 AM ---------- Previous post was at 10:25 AM ----------
rahulbasu2013 said:
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
Click to expand...
Click to collapse
I rooted my phone using "Framaroot app" by Boromir exploit and also installed Superuser.
Using ROM Toolbox pro, I changed the system font on my device.
But when I tried to revert to the system font, the phone wont turn on; (I also forgot to take a Nandroid backup)
The phone gets stuck at the boot logo.
I can enter recovery mode, and I also factory reset my phone, wiped cache, etc, but its of no use (first it turns on and then after the boot logo animation, nothing happens....)
Is my phone bricked????
Please help.......

rahulbasu2013 said:
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
---------- Post added at 10:39 AM ---------- Previous post was at 10:25 AM ----------
I rooted my phone using "Framaroot app" by Boromir exploit and also installed Superuser.
Using ROM Toolbox pro, I changed the system font on my device.
But when I tried to revert to the system font, the phone wont turn on; (I also forgot to take a Nandroid backup)
The phone gets stuck at the boot logo.
I can enter recovery mode, and I also factory reset my phone, wiped cache, etc, but its of no use (first it turns on and then after the boot logo animation, nothing happens....)
Is my phone bricked????
Please help.......
Click to expand...
Click to collapse
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.

supersapien said:
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
Click to expand...
Click to collapse
ok thanks...

rahulbasu2013 said:
ok thanks...
Click to expand...
Click to collapse
There is a thanks button

Plz help
supersapien said:
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
Click to expand...
Click to collapse
hey bro i also have same problem and my phone everytime stuck on bootloop but i am out of town now so is there any to flash stock rom using cwm
Thanks in advance

Plz
Samuel117 said:
hey bro i also have same problem and my phone everytime stuck on bootloop but i am out of town now so is there any to flash stock rom using cwm
Thanks in advance
Click to expand...
Click to collapse
Not any reply plz reply guys i need help

Hey I'm using Windows 8.1 pro... so any help?????
---------- Post added at 09:34 PM ---------- Previous post was at 09:30 PM ----------
Samuel117 said:
Not any reply plz reply guys i need help
Click to expand...
Click to collapse
How did you get into that problem?????
and can you describe in detail?

Using fastboot
rahulbasu2013 said:
Hey I'm using Windows 8.1 pro... so any help?????
---------- Post added at 09:34 PM ---------- Previous post was at 09:30 PM ----------
How did you get into that problem?????
and can you describe in detail?
Click to expand...
Click to collapse
i tried fastboot but not any keys work when i tried to go back so i remove my phone battery and when i put battery again and tried to switch on it stucked on bootlogo

Samuel117 said:
i tried fastboot but not any keys work when i tried to go back so i remove my phone battery and when i put battery again and tried to switch on it stucked on bootlogo
Click to expand...
Click to collapse
did you try the unbricking guide??? did that help??

No
rahulbasu2013 said:
did you try the unbricking guide??? did that help??
Click to expand...
Click to collapse
cant able to use those step out of town now not have pc here

It didn't Work.
I did everything correctly, the green circle appeared, still stuck on bootloop. HELP PLZ.

bluetooth not working
hey guyz i have installed custom rom lewa os5 in my canvas a110q, every things works fine but bluetooth is not working. is it rom problem or something else. is there any solution for this? kindly reply me [email protected] thnx.

anyone helpme frnds
i installed kitkat rom and now my phone is gets bugging when i lock phn it wont unlock again display was not coming
what i want to do???????????

sai teja badri said:
i installed kitkat rom and now my phone is gets bugging when i lock phn it wont unlock again display was not coming
what i want to do???????????
Click to expand...
Click to collapse
Flash v1 and then flash any rom or uboot.bin of v1 via sp tools
Sent from my C2305 using Tapatalk

guyz it cnat detect my phone on device manager....
in other devices in device manager...it shows micromax a110q and the phone just boots ....
plz help

What happened is that, i haven't rooted my phone yet and out of no where it goes into bootloop.
I followed all the steps from installing the drivers - till getting the green circle, but no success
Can you please help me?

Will it help ?
I have the same problem on Phone stuck on boot up....
I Never did any rooting/other software updates to my mobile.
The Problem started when a message like "some XYZ process has stopped"
I clicked OK but the message came 1 after the other many times so I though of rebooting mobile.... I gave reboot option and the problem raised and the phone never did start up. I tried factory reset but still the same........A friend suggested me this But i still want to confirm is it harmless to use this and is this the proper technique for my problem ?
Please Help Me....

help !! samsung tab 4 t230 root update

hello i do a root to my tab4 sm-t230 by kingo root somthing like that
I did an update from the device via the Settings
but no from the root
now the update try to install
Suddenly, the machine shows Android dead
and restarting And repeats the action again
i try to do hard reset but nothing happend
the only that i can to do i downloding by press power button and down
what can i do now
thnks

yaniv134 said:
hello i do a root to my tab4 sm-t230 by kingo root somthing like that
I did an update from the device via the Settings
but no from the root
now the update try to install
Suddenly, the machine shows Android dead
and restarting And repeats the action again
i try to do hard reset but nothing happend
the only that i can to do i downloding by press power button and down
what can i do now
thnks
Click to expand...
Click to collapse
Hi yaniv.Look,try to find stock rom for your device.If you find stock rom,flash it with Odin.That probably can help you.
---------- Post added at 03:55 PM ---------- Previous post was at 03:25 PM ----------
StefanBuljic said:
Hi yaniv.Look,try to find stock rom for your device.If you find stock rom,flash it with Odin.That probably can help you.
Click to expand...
Click to collapse
Ok,I find something.
Stock Rom:
http://www.androidayos.com/galaxy-tab-4-stock-firmware/
Odin:
https://mega.nz/#!nZoThZ5a!TrPzLGDrtQJSmJfH8UkOFAkfc9wSLl_lPhrVusQoRJ8
There is a full guide
http://www.androidayos.com/unroot-galaxy-tab-4-7-0-stock-firmware/
DON'T WORY ABOUT USB DRIVERS.IT'S NOT NECESSARY.
You lose all files doing this.
Thats it.
Read the guide necessarily!!!