Hello Everyone Sorry for Delay i was out of City so... thats why.. i was not able to share or update it..
So now wait is over i got Ubislate 7c+ Full Stock ROM from Datawind office and Livesuit to flash. So now you can try to build custom rom and can try other rom's and can test it..
Here is the UBISlate Datawind Stock ROm
Click Here to Download UBISLATE 7C+ Stock Rom
Click here to download LiveSuit Flasher
Step by Step Guide
1. Put Your Ubislate off means complete power off
2. Run Livesuite
3. Select/Open UBI Slate stock Img File
4. Plug oneside of Data cable to computer only to computer not with Tablet (rember)
5. Now keep pressing and holding Volume up+ button and now attach data cable with tablet ( UBISLATE)
6. Now Popup of live suite will say Yes and again Yes press yes both times and ... release the volume up+ button
7. Now update will start.... wait for 5 min
8. 100% up gradation complete
:good:Now enjoy your UBISLATE ONCE AGAIN ENJOY
Enjoy Just
Uploaded or not?
What Happend Brother ,,uploading complete or not?
What a good news you got!
Now if you're telling us all truth, and this is original firmware, then this device is now un-brickable. In case of bootloop, we can go to flash mode with some pin and key combination and flash back to stock. And in case bootloader failed to load (hard brick), this device automatically goes to flash mode (kinda fail safe) and we can get back our working device. This is all because of Allwinner A13 board. It's not a work of Datawind.
Another thing is that, I can start development, because I know there way to recover back.
I hope you really got the firmware and you'll upload it soon.
Thank you.
Hello Friends for those with stuck on android n forgotten password
TRY >> http://j.gs/205J
it helped me
n please comment if it helps u to
ENJOY
ubislate 7c + rom
simars said:
Hello Every...
So now wait is over i got Ubislate 7c+ Full Stock ROM from Datawind office and Livesuit to flash. So now you can try to build custom rom and can try other rom's and can test it..
Here is the UBISlate Datawind Stock ROm
Uploading Please wait it will take 1 Hour around 240Mb
Enjoy Just
Click to expand...
Click to collapse
Where is your upload man???
Have you uploaded or not?
I got same problem, device is not booting only datawind logo
on the screen. I told about it to datawind, they said that they
Will send me link for rom zip, I asked "device is not booting then
How to possible to insert zip file into device "
they told " card should be formatted where zip pasted, then you
Can use that file "
But they didn't send me any mail in 24 hours.
Info for developer .....thanks
ahirwar said:
Where is your upload man???
Have you uploaded or not?
I got same problem, device is not booting only datawind logo
on the screen. I told about it to datawind, they said that they
Will send me link for rom zip, I asked "device is not booting then
How to possible to insert zip file into device "
they told " card should be formatted where zip pasted, then you
Can use that file "
But they didn't send me any mail in 24 hours.
Info for developer .....thanks
Click to expand...
Click to collapse
yea there are 2 way for flashing
one is flashing using livesuite (this is flashed with fone off-in download mode)
second is by recovery software
just do as instructed in my link or wait for the datawind to send u the file n flash it using livesuite
*NOTE* u should know that tab can connect to pc when the tab is stuck on loading image *
fkardame said:
yea there are 2 way for flashing
one is flashing using livesuite (this is flashed with fone off-in download mode)
second is by recovery software
just do as instructed in my link or wait for the datawind to send u the file n flash it using livesuite
*NOTE* u should know that tab can connect to pc when the tab is stuck on loading image *
Click to expand...
Click to collapse
Have you got any rom for ubislate 7c + ???
If you have .... where is it?
ahirwar said:
Have you got any rom for ubislate 7c + ???
If you have .... where is it?
Click to expand...
Click to collapse
as i said go to this link >>> http://j.gs/205J
n read it n do as it says
fkardame said:
as i said go to this link >>> http://j.gs/205J
n read it n do as it says
Click to expand...
Click to collapse
I want to say something to you, first your link
Is not working, second if you really know
About android then you should give real
link. Third this forum not for your advertising
This is for development so no need to put
advertise link, only put direct link ok Mr.
See here: http://forum.xda-developers.com/showpost.php?p=39546159&postcount=116
That person reported to got stock firmware along with proper instruction to make a bootable SDCard.
Direct Link for the firmware: https://www.dropbox.com/sh/aywf02dd0y2qp2k/Ao2v2JZxvC
Edit: That's original Stock firmware for Ubislate7C+, see explanation here: http://forum.xda-developers.com/showpost.php?p=39623084&postcount=130
ahirwar said:
I want to say something to you, first your link
Is not working, second if you really know
About android then you should give real
link. Third this forum not for your advertising
This is for development so no need to put
advertise link, only put direct link ok Mr.
Click to expand...
Click to collapse
try this >>> http://fkardame.blogspot.in/p/ubislate-7c.html
or find on ur own
enjoy n learn to request not order
callingmedic911 said:
See here: http://forum.xda-developers.com/showpost.php?p=39546159&postcount=116
That person reported to got stock firmware along with proper instruction to make a bootable SDCard.
Direct Link for the firmware: https://www.dropbox.com/sh/aywf02dd0y2qp2k/Ao2v2JZxvC
Edit: That's original Stock firmware for Ubislate7C+, see explanation here: http://forum.xda-developers.com/showpost.php?p=39623084&postcount=130
Click to expand...
Click to collapse
thanks brother for helping me.
I would like to ask one question
Is that original firmware? Because its name is
Wifi8188 something.
.
ahirwar said:
thanks brother for helping me.
I would like to ask one question
Is that original firmware? Because its name is
Wifi8188 something.
.
Click to expand...
Click to collapse
Yes, that is original firmware for Ubislate7C+, please read my explanation (I have explained and proved that is stock firmware). Also, after flashing that file, you will have no longer Datawind's pre-installed (All sh*ty apps, so nothing to worry about).
That name looks weird because, it was automatically generated by compiler according to boards/configuration/driver etc, and looks like Datawind didn't had time to rename that file.
BTW Flash it, you'll have no problems.
callingmedic911 said:
Yes, that is original firmware for Ubislate7C+, please read my explanation (I have explained and proved that is stock firmware). Also, after flashing that file, you will have no longer Datawind's pre-installed (All sh*ty apps, so nothing to worry about).
That name looks weird because, it was automatically generated by compiler according to boards/configuration/driver etc, and looks like Datawind didn't had time to rename that file.
BTW Flash it, you'll have no problems.
Click to expand...
Click to collapse
Phoenixcard not working it stuck after burn MBR.
any suggestion????
ahirwar said:
Phoenixcard not working it stuck after burn MBR.
any suggestion????
Click to expand...
Click to collapse
u can use livesuite n flash that img file u got from the dropbox directly
1. install livesuite drivers
2. open livesuite n select that file u got .
3. press n hold vol down button n insert the usb cable n keep pressing power button till u get warning on ur comp screen
4. press yes n yes
5. it will start flashing
Simple Done
n for ur information that 8188 means it has wifi of rtl8188 n if in case u have rtl 8150 then ur wifi wont work
so try to make a backup of ur device using cwm recovery
Updating Please Wait for 10 Mins
simars said:
Hello Every...
So now wait is over i got Ubislate 7c+ Full Stock ROM from Datawind office and Livesuit to flash. So now you can try to build custom rom and can try other rom's and can test it..
Here is the UBISlate Datawind Stock ROm
Uploading Please wait it will take 1 Hour around 240Mb
Enjoy Just
Click to expand...
Click to collapse
Updating Dear Please wait for 10 mins more
fkardame said:
u can use livesuite n flash that img file u got from the dropbox directly
1. install livesuite drivers
2. open livesuite n select that file u got .
3. press n hold vol down button n insert the usb cable n keep pressing power button till u get warning on ur comp screen
4. press yes n yes
5. it will start flashing
Simple Done
n for ur information that 8188 means it has wifi of rtl8188 n if in case u have rtl 8150 then ur wifi wont work
so try to make a backup of ur device using cwm recovery
Click to expand...
Click to collapse
Boss please give me livesuit and cwm recovery link.
And instruction for install cwm recovery .
I installed successfully stock rom via phoenixcard.
Thanks in advance
ahirwar said:
Phoenixcard not working it stuck after burn MBR.
any suggestion????
Click to expand...
Click to collapse
What is the size of your SDCard? And how're you connecting your SDCard to your PC?
---------- Post added at 09:06 PM ---------- Previous post was at 08:56 PM ----------
fkardame said:
if in case u have rtl 8150 then ur wifi wont work
Click to expand...
Click to collapse
How can same device model have different WiFi boards?
callingmedic911 said:
What is the size of your SDCard? And how're you connecting your SDCard to your PC?
---------- Post added at 09:06 PM ---------- Previous post was at 08:56 PM ----------
How can same device model have different WiFi boards?
Click to expand...
Click to collapse
it does have coz its made with few different manufacturers coz the quantity ordered is very high
so it depends on the manufacturer .. what drivers n hardware they use
but the base is all the same like it has allwinner a13 processor
n allwinner13 support 3 different touchpanel drivers too
n 2 wlan driver n 3-4 sensor drivers n 2 diff camera driver
so all the best with using the file
i had one ubislate without sim i almost downloaded 44 flash files n got the right one finally
coz in some touch was not working in some camera in some sensor
but finally got the right file... thats what my experience says
take care n be safe before flashing as u can take the backup of ur device before flashing the given file
---------- Post added at 01:16 PM ---------- Previous post was at 01:10 PM ----------
ahirwar said:
Boss please give me livesuit and cwm recovery link.
And instruction for install cwm recovery .
I installed successfully stock rom via phoenixcard.
Thanks in advance
Click to expand...
Click to collapse
livesuite link >>> http://j.gs/2184 (Skip ad)
cwm recovery link >>> http://j.gs/205Z(skip ad)
n method to
Method:
1: Connect the tab to pc n install driver
2: Start the tab n activate usb debugg in tur tab
3: Flash Cwm recovery by clicking recovery for ics and follow the instruction
4: Click reboot to recovery.
ubislate 7c+
adb is not working in ubislate 7c+ ,
Already installed sdk adb in my pc. But adb not recognized
Ubislate 7c+ . Datawind don't care about customer problem.
it stucks on datawind logo
Related
hello guy's
i made a custom rom for galaxy pro
deodxed and rooted & init.d support for GB 2.3.6
and we will use galaxy mini cwm 5.0.2.6 (it's work 100%)
and also custom boot.img
How to use cwm?
use odin to flash cwm recovery and boot.img
as one package and don't forget to use BENNETT_v1.0_2.ops
we can't use cwm by volume or home button
Q=UP : T=DOWN : Z=ENTER : POWER=BACK
AND YOU CAN MAKE BACKUP AND RESTORE
to flash the custom rom you have to mount system and cache and data
after flash the rom you have to make wipe data /reset and wipe cache and wipe dalvik cache
Download boot.img
http://www.mediafire.com/file/3uho1syl5z1j1ls/boot.tar.md5
Download custom rom
http://www.mediafire.com/file/z5y85ffo4kf0ce4/GT-B7510.zip
Download recovery
http://www.mediafire.com/file/7s4ompc1m6jpsuc/recovery.tar.md5
i hope galaxy mini devs to help us
sure i'm not Responsible for any damage
this is great!! but im having trouble when flashing recovery
luy991 said:
this is great!! but im having trouble when flashing recovery
Click to expand...
Click to collapse
use odin to flash recovery and use file attachment unrar it
flash as one package
Hi,
Could you please post more info about the rom, like known issues, whats working and whats not, a2sd scripts to use.
Thanks.
any hopes for multitouch????
is this cyanogen mod??
Detailed installation instructions & screenshots plz
Would be great if you could provide detailed installation instructions & ROM info and screenshots please...
Has anyone ever try that rom? No information ,no pictures. Nothing ... Just explanation and download link
success
Hello everyone!
I tried to install cwm-recovery (for Galaxy Mini) and author's firmware and that was successful.
I had:
1. Odin v4.38.
2. Stock firmware (Android 2.3.6) rooted by "universal_gb_root_v19.zip".
3. Installed application "Quick Boot (Reboot)" (You can find in Google Play Store).
I did (my way):
1. Power off phone.
2. Long press "Q"+"Power button" (you will see picture with text "Downloading...").
3. Press button "OPS" and select BENNET file.
4. Press button "BOOT" and select "boot.tar.md5" (you will see error, but it's normal).
5. Press button "One Package" and select "recovery.tar.md5".
6. Select checkbox "One Package".
7. Press button "Start" and wait.
8. Phone will be reboot.
9. Launch on the phone application "Quick Boot" and press "Recovery".
10. Phone will be loaded in "CWM Recovery".
11. You can flash author's firmware "GT-B7510.zip" (WARNING: don't work Wi-Fi after flashing!!!)
gnomba said:
Hello everyone!
I tried to install cwm-recovery (for Galaxy Mini) and author's firmware and that was successful.
I had:
1. Odin v4.38.
2. Stock firmware (Android 2.3.6) rooted by "universal_gb_root_v19.zip".
3. Installed application "Quick Boot (Reboot)" (You can find in Google Play Store).
I did (my way):
1. Power off phone.
2. Long press "Q"+"Power button" (you will see picture with text "Downloading...").
3. Press button "OPS" and select BENNET file.
4. Press button "BOOT" and select "boot.tar.md5" (you will see error, but it's normal).
5. Press button "One Package" and select "recovery.tar.md5".
6. Select checkbox "One Package".
7. Press button "Start" and wait.
8. Phone will be reboot.
9. Launch on the phone application "Quick Boot" and press "Recovery".
10. Phone will be loaded in "CWM Recovery".
11. You can flash author's firmware "GT-B7510.zip" (WARNING: don't work Wi-Fi after flashing!!!)
Click to expand...
Click to collapse
So that means that no more Wifi fr the Galaxy PRO, so is that no worth, is it?
So flashing that ROM, is just a waste coz no more Wifi mmmm I don't know what to do... D:
kevin_uzumaki said:
So that means that no more Wifi fr the Galaxy PRO, so is that no worth, is it?
So flashing that ROM, is just a waste coz no more Wifi mmmm I don't know what to do... D:
Click to expand...
Click to collapse
I just tried author's method. I was interested in installing CWM and possibility installing from CWM.
So...
gnomba said:
I just tried author's method. I was interested in installing CWM and possibility installing from CWM.
Click to expand...
Click to collapse
So you jsut have the CWM and not a Custom ROM you have the offical and is root, I need some help i don't find anything fr this Smartphone, I had already Flask Xperia's and the SGS that I had but this one... I have no idea D:
HELP PLEASE D:
has anyone done this succesfully without any issues?
custom rom flash
gnomba said:
I just tried author's method. I was interested in installing CWM and possibility installing from CWM.
Click to expand...
Click to collapse
cwm is working fine but after following the steps before and after flashing i am not able to acquire root privelages for any root app(titanium backup) please help me with this:crying:
---------- Post added at 01:23 PM ---------- Previous post was at 01:11 PM ----------
malcolm_cg said:
has anyone done this succesfully without any issues?
Click to expand...
Click to collapse
tried but cannot acquire root privelages for titanium backup and other root apps
is the wifi issue fixed yet?
or have you stopped development?
you could always ask for some devs help
gtb-7510
i installed micromax a80 clockmod recovery in my gtb 7510 (galaxy pro)........its installed perfectly but when i re-started my.....phone......then it didn't came in any mode i.e not in download...or even in recovery mode........!
it is in dead condition.......plz tell me what 2 do ...??
because.....i almost tried every thing......but its not getting on....!
rsdanger said:
i installed micromax a80 clockmod recovery in my gtb 7510 (galaxy pro)........its installed perfectly but when i re-started my.....phone......then it didn't came in any mode i.e not in download...or even in recovery mode........!
it is in dead condition.......plz tell me what 2 do ...??
because.....i almost tried every thing......but its not getting on....!
Click to expand...
Click to collapse
1st que.
From where you got the idea to install clockwork mode of MICROMAX mobile into out galaxy pro??
There is 1st rule of flashing that roms,firmwares,recoveries made for some different phone should not be flashed into some different phone you are using.
So remember that from now on.
Now,
Your current problem.
You are sayin that is does not even start right?
If you connect it to charger, does it show battery logo on screen?
Like the logo we see when phone is switched off & we put it in charging?
sent from my samsung galaxy pro GT-B7510 using xda premium
Hi..similar error here can flash the original rom
i kinda screwed up my Galaxy pro too..i flashed a false rom now..i cant even get my battery charging,download mode etc screens..
but when i hold volume dowm + power+ Q keys for 10 seconds..the phone detects on a computer..all i get is samsung CDMA technologies,modem and serial diag port...also samung usb composite port...
Odin detects the com mpping ..when i start to flash..the process gets stuck on setup connection....
adb doesnt detect it...
power +e and power + r also detected on pc..but no display on pc....
how will i restore my phone...its partially detected on pc!!!
essuraj said:
i kinda screwed up my Galaxy pro too..i flashed a false rom now..i cant even get my battery charging,download mode etc screens..
but when i hold volume dowm + power+ Q keys for 10 seconds..the phone detects on a computer..all i get is samsung CDMA technologies,modem and serial diag port...also samung usb composite port...
Odin detects the com mpping ..when i start to flash..the process gets stuck on setup connection....
adb doesnt detect it...
power +e and power + r also detected on pc..but no display on pc....
how will i restore my phone...its partially detected on pc!!!
Click to expand...
Click to collapse
Well, m inclined to think that ur device is bricked...
If odin cant flash the stock firmware, then i think there is very less you can do.
Is your warranty still available?
I mean is your galaxy pro still under 1 year of purchase?
If so, then you can immediatly rush to samsung customer service centre for best solution.
If you want to try something by yourself,
Then there is 1 method.
I read about it long long ago.
So not sure of it.
It was called something like "usg jig" or "jtag"..not sure though..u can google it if you want to search more on it..
Bt my advice would be to go to customer care if it is in 1 yr of purchase..
sent from my samsung galaxy pro GT-B7510 using xda premium
omg.....nothing else is possible?
well im out of warrenty..and the customer care people say they have to replace the whole motherboard whch costs to 3500Rs..
so i gave up...i tried to explain them it was a software issue but they dont understand....
and i thought the jtag was to get into download mode...where can i get that in india??
essuraj said:
well im out of warrenty..and the customer care people say they have to replace the whole motherboard whch costs to 3500Rs..
so i gave up...i tried to explain them it was a software issue but they dont understand....
and i thought the jtag was to get into download mode...where can i get that in india??
Click to expand...
Click to collapse
Ohh, u r from india?
Nice, me too..
Well, 2 of my frends had their phone bricked..but both were in warranty..so they got device replacement/mother-board replacement for free..
N i knw its very hard to find jtag in india..
N also, i agree that though flashing is software issue, customer care ppl nly do mother-board replacement nly..
N somehow that works..
BTW, what exact error you get when you try to flash with odin?
N what are you trying to flash with odin now? Stock firmware right?
Which one?
sent from my samsung galaxy pro GT-B7510 using xda premium
Hello guys first all of all just forthe info Allwinner A10 tablet cant be hard bricked! You can always flash a livesuit.img and restore your tab back! We dont have the original liveusit.img of the tab but i manage to get back on stock with few steps and this method is confirmed and tested!!
Requirements -
ADB Drivers ( http://www.4shared.com/rar/NY7NE6wm/ADB_Drivers.html )
USB Mouse
Little Brain
Note : If you have CWM installed onyur tab you can simply Restore from your restored backup if you dont have one here it is
http://www.4shared.com/rar/t3ycEEpk/2012-09-25114926.html
Step 1 : - Download the software called Livesuit you can easily google it and find it but here's treat for you!
http://www.yarvik.com/userfiles/yarvikfirmware/YarvikLiveSuit.zip
Step 2 : - Download this image http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img
Step 3 : - Extract Livesuit software and open Livesuit.exe -- > Whataver pop-ups come just click no! -- > Click on select image and browse to the downloaded TAB461 .img and leave the software as it is
Step 4 : - Now connect your tablet ( make sure it is turned off not in recovery or something , you can do this by holding power button for long ) to the pc/laptop by holding back button! as soon as you attach usb , while holding back button press 'power' button 10 times repeatedly!
Wait and a pop up will come Click 'YES' 2 times it will take 2 mins to flash the image and u will soon boot up!
Step 5 :- Touch wont work on this image! So connect your wired mouse with OTG cable and install CWM and then the backup! as described below
http://www.facebook.com/l.php?u=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1906247&h=xAQG1BrKz
If having any problem comment below! i will solve it!
If u like my work....just hit THANKS
In spite of installing the adb drivers my device does not show please help
if i want to use this process to root my funbook P275, without back button, will it work?
Wifi not working..
after un brick my micromax P500..
wifi not working..
i thing wifi driver is missing.. plsssss help.....
---------- Post added at 02:18 PM ---------- Previous post was at 01:39 PM ----------
pls help bro....
plsss help....
hi bro.. i bricked my funbook pro.. and now i recover it but my wifi driver is missing.. now wifi is not working..
do u give me a idea where i got micromax P500 wifi driver..
Plss help.....
please help...!!!!
I too unbricked my funbook p500 ....
but after that my wifi is not working ..... i trid many rom but am not able to use wifi
pls help......
IMG of working P500 (without wifi problems)
cool.gautam said:
Hello guys first all of all just forthe info Allwinner A10 tablet cant be hard bricked! You can always flash a livesuit.img and restore your tab back! We dont have the original liveusit.img of the tab but i manage to get back on stock with few steps and this method is confirmed and tested!!
Requirements -
ADB Drivers ( http://www.4shared.com/rar/NY7NE6wm/ADB_Drivers.html )
USB Mouse
Little Brain
Note : If you have CWM installed onyur tab you can simply Restore from your restored backup if you dont have one here it is
http://www.4shared.com/rar/t3ycEEpk/2012-09-25114926.html
Step 1 : - Download the software called Livesuit you can easily google it and find it but here's treat for you!
http://www.yarvik.com/userfiles/yarvikfirmware/YarvikLiveSuit.zip
Step 2 : - Download this image http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img
Step 3 : - Extract Livesuit software and open Livesuit.exe -- > Whataver pop-ups come just click no! -- > Click on select image and browse to the downloaded TAB461 .img and leave the software as it is
Step 4 : - Now connect your tablet ( make sure it is turned off not in recovery or something , you can do this by holding power button for long ) to the pc/laptop by holding back button! as soon as you attach usb , while holding back button press 'power' button 10 times repeatedly!
Wait and a pop up will come Click 'YES' 2 times it will take 2 mins to flash the image and u will soon boot up!
Step 5 :- Touch wont work on this image! So connect your wired mouse with OTG cable and install CWM and then the backup! as described below
http://www.facebook.com/l.php?u=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1906247&h=xAQG1BrKz
If having any problem comment below! i will solve it!
If u like my work....just hit THANKS
Click to expand...
Click to collapse
Excuse me for asking big thing, but can you make a IMG file from your (or anyone) working funbookPro.
The livesuit wiped something related to wifi while using Yarvik image file. Since then the wifi isn't working. I managed to turn it on using some other Stock firmwares but its not able to get the IP address. ( tried http://www.curtisint.com/html/CustService/Manuals/PRO_PLT1044_FIRMWARE.ZIP, http://smartpad.mediacomeurope.it/Prodotti/Download.aspx?XRC=M-MP1010I and many other stock firmwares). Unless the source stock firmware is flashed seems the wifi is not going to work. Even the backup provided by you is unable to bring back the wifi. funbookpro is using some wifi chip which isn't present in most of the tablets. I've been struggling to get it back from few days. downloaded many Gigs still no luk
Thanks in advance.
---------- Post added at 02:04 PM ---------- Previous post was at 01:56 PM ----------
oh btw anyone who bricked their funbookpro can use the following firmwares with livesuit till we get an official firmware
Most of the firmwares wipe out the internal SD card. use only if u dont care about internal SD or if it is being shown as damaged.
The following are the images that worked for me..
http://www.kocaso.com/firmware/M1062_01.exe
http://www.curtisint.com/html/CustService/Manuals/PRO_PLT1044_FIRMWARE.ZIP
http://smartpad.mediacomeurope.it/Prodotti/Download.aspx?XRC=M-MP1010I
http://www.mediacomeurope.it/ZeusInc/PressRoom/Documents/1010i.zip
http://smartpad.mediacomeurope.it/Prodotti/Download.aspx?XRC=M-MP1010I
Some have problem while restoring the backup given by Gautam.
FunBook Pro similar firmware with other 3g dongles working (try this only on bricked)
M1062_01.exe This firmware is working great. I've tried couple of 3G dongles they are working fine. Screw photon + :laugh:
The downside is unable to use other updates like PowerTab_JB_V2_by_Joby. It just freezes at cyanogenmod logo. Oh yeah!!! it wipes out the Internal SD card as well. Still the firmware isn't a perfect match.
Touch screen not working
After unbricking, touch is not working, any ideas? Thanks
naneraja said:
After unbricking, touch is not working, any ideas? Thanks
Click to expand...
Click to collapse
Follow the step5 from the main post by cool.gautam
matrixbluestar said:
Follow the step5 from the main post by cool.gautam
Click to expand...
Click to collapse
Works now after reinstalling the backup. Thanks for the help
micromax p500
i have installed cwm recovery but nothing works in it no button works except power button and mouse is also not working and touch is also not working
please help.................
Hi everyone, this is a guide that help you to unbrick Micromax Canvas 2 Plus A110Q.
Follow all the steps carefully
1. Download the stock rom v1 from here . Do not download stock rom v2 from anywhere, that rom contain many bugs.
2. Download sp flash tools form here. (tool needed for flashing rom on the device)
3. Download USB drivers from here
Now you need to install the usb preloader drivers you just downlaoded.
To install the drivers:-
1.Extract the USB drivers.rar file.
2.Switch off your phone
3.Open device manager(search for "Device Manager") or click on computer properties , then device manager..
4.Connect your phone in OFF state
5.There will be a device named "mt65xx preloader" which will be there for some seconds.
You need to be quick at this. As soon as it is displayed, right click and click update driver.
Browse manually the files from usb drivers you extracted.
NOTE: THIS METHOD WILL NOT WORK ON WINDOWS 8
Now, if you are using windows 8 do this to install the drivers:
1. Dwonlaod the usb driver.rar file.
2. Hover pointer to Top Right corner of your screen, choose Settings from sidebar
3.Click last option "Change PC Settings"
4.Select "General"
5.Scroll to end and find "Restart Now" under "Advanced Startup". PC Will be in troubleshoot mode now
6.Once screen is back, select option "Troubleshoot"
7.Select "Advanced Options"
8.Select "Startup Settings"
9.Select "Restart"
Now important step. There will be several options to select from. You need to select "Option 7". For this press "7" key from number pad.
After your PC starts, follow above steps.
10. Choose the win 7 file from usb drivers.rar file to install drivers on windows 8 .
Now,
4. Extract ROM and Flash Tool
5. Open Flash_tool.exe from SP_FLASH Tools.
6.Select "Scatter-loading" and select "MT6589_Android_scatter_emmc.txt" from ROM folder
7.Select "Download" option, it will search for phone now.(if does not detect your phone pull the battery out and put it in again.)
8.Switch OFF the phone.
9.Connect it with USB (in OFF state only) (proper divers must be installed as said above)
10.If all goes well you'll see data transfer. At the end there will be Green Circle in middle of screen which means ROM is flashed.(don't panic if there is no green circle just let it work for 10 minutes and unplug your phone from computer.)
11.Remove phone, Switch it ON.
Thanks
Thanks for this guide. I think I bricked my Canvas2+. So I'm trying this now.
I tried this and it worked. Successfully unbricked my phone.
Sent from my IQ446 Magic using Tapatalk
supersapien said:
Thanks for this guide. I think I bricked my Canvas2+. So I'm trying this now.
Click to expand...
Click to collapse
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
---------- Post added at 10:39 AM ---------- Previous post was at 10:25 AM ----------
rahulbasu2013 said:
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
Click to expand...
Click to collapse
I rooted my phone using "Framaroot app" by Boromir exploit and also installed Superuser.
Using ROM Toolbox pro, I changed the system font on my device.
But when I tried to revert to the system font, the phone wont turn on; (I also forgot to take a Nandroid backup)
The phone gets stuck at the boot logo.
I can enter recovery mode, and I also factory reset my phone, wiped cache, etc, but its of no use (first it turns on and then after the boot logo animation, nothing happens....)
Is my phone bricked????
Please help.......
rahulbasu2013 said:
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
---------- Post added at 10:39 AM ---------- Previous post was at 10:25 AM ----------
I rooted my phone using "Framaroot app" by Boromir exploit and also installed Superuser.
Using ROM Toolbox pro, I changed the system font on my device.
But when I tried to revert to the system font, the phone wont turn on; (I also forgot to take a Nandroid backup)
The phone gets stuck at the boot logo.
I can enter recovery mode, and I also factory reset my phone, wiped cache, etc, but its of no use (first it turns on and then after the boot logo animation, nothing happens....)
Is my phone bricked????
Please help.......
Click to expand...
Click to collapse
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
supersapien said:
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
Click to expand...
Click to collapse
ok thanks...
rahulbasu2013 said:
ok thanks...
Click to expand...
Click to collapse
There is a thanks button
Plz help
supersapien said:
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
Click to expand...
Click to collapse
hey bro i also have same problem and my phone everytime stuck on bootloop but i am out of town now so is there any to flash stock rom using cwm
Thanks in advance
Plz
Samuel117 said:
hey bro i also have same problem and my phone everytime stuck on bootloop but i am out of town now so is there any to flash stock rom using cwm
Thanks in advance
Click to expand...
Click to collapse
Not any reply plz reply guys i need help
Hey I'm using Windows 8.1 pro... so any help?????
---------- Post added at 09:34 PM ---------- Previous post was at 09:30 PM ----------
Samuel117 said:
Not any reply plz reply guys i need help
Click to expand...
Click to collapse
How did you get into that problem?????
and can you describe in detail?
Using fastboot
rahulbasu2013 said:
Hey I'm using Windows 8.1 pro... so any help?????
---------- Post added at 09:34 PM ---------- Previous post was at 09:30 PM ----------
How did you get into that problem?????
and can you describe in detail?
Click to expand...
Click to collapse
i tried fastboot but not any keys work when i tried to go back so i remove my phone battery and when i put battery again and tried to switch on it stucked on bootlogo
Samuel117 said:
i tried fastboot but not any keys work when i tried to go back so i remove my phone battery and when i put battery again and tried to switch on it stucked on bootlogo
Click to expand...
Click to collapse
did you try the unbricking guide??? did that help??
No
rahulbasu2013 said:
did you try the unbricking guide??? did that help??
Click to expand...
Click to collapse
cant able to use those step out of town now not have pc here
It didn't Work.
I did everything correctly, the green circle appeared, still stuck on bootloop. HELP PLZ.
bluetooth not working
hey guyz i have installed custom rom lewa os5 in my canvas a110q, every things works fine but bluetooth is not working. is it rom problem or something else. is there any solution for this? kindly reply me [email protected] thnx.
anyone helpme frnds
i installed kitkat rom and now my phone is gets bugging when i lock phn it wont unlock again display was not coming
what i want to do???????????
sai teja badri said:
i installed kitkat rom and now my phone is gets bugging when i lock phn it wont unlock again display was not coming
what i want to do???????????
Click to expand...
Click to collapse
Flash v1 and then flash any rom or uboot.bin of v1 via sp tools
Sent from my C2305 using Tapatalk
guyz it cnat detect my phone on device manager....
in other devices in device manager...it shows micromax a110q and the phone just boots ....
plz help
What happened is that, i haven't rooted my phone yet and out of no where it goes into bootloop.
I followed all the steps from installing the drivers - till getting the green circle, but no success
Can you please help me?
Will it help ?
I have the same problem on Phone stuck on boot up....
I Never did any rooting/other software updates to my mobile.
The Problem started when a message like "some XYZ process has stopped"
I clicked OK but the message came 1 after the other many times so I though of rebooting mobile.... I gave reboot option and the problem raised and the phone never did start up. I tried factory reset but still the same........A friend suggested me this But i still want to confirm is it harmless to use this and is this the proper technique for my problem ?
Please Help Me....
Hey, can someone tell me if i can find a rom for huawei ascend y210d (y210 - 0200)? and a link if is posible.
I have now a viettel rom and is not working very fine, is crushig, i need a new rom pls somebody... a link or .... something
cilig said:
Hey, can someone tell me if i can find a rom for huawei ascend y210d (y210 - 0200)? and a link if is posible.
I have now a viettel rom and is not working very fine, is crushig, i need a new rom pls somebody... a link or .... something
Click to expand...
Click to collapse
http://www.android-hilfe.de/root-cu...nmod-10-1-u8666e-entwicklung-eingestellt.html
a ROM for Huawei ascend y210-0200
to all developers out there someone plz help me on my huawei ascend y2010-0200 phone coz it crashes all of my system app and user app .. i cannot open my phone and stock on logo .. plz help how to recover and repair my phone .. huhuhu T_T
Can you enter recovery mode?
Via [email protected]
same device
IceTe said:
Can you enter recovery mode?
Via [email protected]
Click to expand...
Click to collapse
Hi. Have the same device. But it's almost dead. No recowery((. ( Was updating via update.app on sd card but missed the sing that it's for my modification of model.
So now it's just flashes lights and connects too PC as some two ports. One is in download mode I think, QPST telling so.. athor I think for some backups.. But I don't know what to do about this ports.. even can't find native firmware.
Simple question is. can I somhow install recowery thru update.app file? Phone is still processing this file, becouse it creates update.log, but with error (maybe if original fw then it just helps, but I still can not find it) or where I can download or even buy native firmware updater?
Maybe is some software that can help thru PC? QPST is powerfull but I miss much knolage(((((((((
Appreciate help
cilig said:
Hey, can someone tell me if i can find a rom for huawei ascend y210d (y210 - 0200)? and a link if is posible.
I have now a viettel rom and is not working very fine, is crushig, i need a new rom pls somebody... a link or .... something
Click to expand...
Click to collapse
https://www.dropbox.com/s/xcmmed4kmn90lry/Y210D stock firmware B869.7z?dl=0
here you are bro my CWM backup of version B869 for Y210D..Also here bro is my other things dumped stock recovery img for this phone flash it with fastboot https://www.dropbox.com/s/a2pltlxuse3sfpo/recovery210d.img?dl=0 also here are my bro adb and fastboot drivers for huawei if this ones dont work just install with kingoroot https://www.dropbox.com/s/37mn5bnkkg4fuh6/Huawei-ADB-FastBootdrivers.zip?dl=0
And use minimal adb and fastboot to do flashing with fastboot..To go into fastboot mode use this first disable fastboot in settings then turn off phone.remove bat,after 5 sec reinsert bat and then turn on phone and when huawei shows release power button and press and hold volume down for 10sec-whatever you think best then connect to pc phone with usb cable and to go to recovery do "adb reboot recovery" from adb or just do same as for fastboot but with pressing volume up instead of volume down button or power up with holding both power and volume up i really dont know but somehow figured out.But before all you know for sure that when youre restoring cwm backup you need to put into "sdcard/clockworkmod/backup" folder from that zip file when you unpack it you will find this folder with date in name and just put it there..And then before doing restore make sure you did wipe data,wipe catche,dalvik catche and format only sistem partition..Here is also https://www.dropbox.com/s/jygfnjygepl2jzd/cwm-oneclick-install.zip?dl=0 cwm recovery for this device
engineeravp said:
Hi. Have the same device. But it's almost dead. No recowery((. ( Was updating via update.app on sd card but missed the sing that it's for my modification of model.
So now it's just flashes lights and connects too PC as some two ports. One is in download mode I think, QPST telling so.. athor I think for some backups.. But I don't know what to do about this ports.. even can't find native firmware.
Simple question is. can I somhow install recowery thru update.app file? Phone is still processing this file, becouse it creates update.log, but with error (maybe if original fw then it just helps, but I still can not find it) or where I can download or even buy native firmware updater?
Maybe is some software that can help thru PC? QPST is powerfull but I miss much knolage(((((((((
Appreciate help
Click to expand...
Click to collapse
i got the same problem. is there any solution by now? please help..
Hi friends !
Encountred WhiteScreen Erros while Rooting your s7262 ??
Dont WOrry ! We have SImple and Working Solution for you
AIM : fixing WhiteScreen Errors on s7262
Things we will need:
(attached at the end of post)
file 1: whitefixS7262.rar location : PC
file 2 : ODIN307.zip Location : PC
**Make sure you have USB drivers installed**
Instructions:
STEP 1 :
a:Put Your phone in download Mode by pressing Volume Down +Home+Power key simultaneously.
b: Press Volume UP when Warning screen appears
STEP 2:
a: Extract ODIN307.ZIP and Run Odin 307.exe as Administrator (by right click > Run As> Administrator)
b: Extract whitefixS7262.rar you will get file BOOTSPL_S7262XXUAMJ3.tar
c: Connect Phone with PC
d:Click on PDA select[COLOR="SeaGreen)"] BOOTSPL_S7262XXUAMJ3.tar [/COLOR]
e: Click START !!
f: You will see message PASS !!
Your Phone WIll Be Rebooted Automatically and whitescreen error will not be occured
for latest and tested tutorial on How to Root Samsung star pro duos s7262 Go to : Rooting Guide for Samsung Star pro duos s7262
Press Thanx if i helped you
If you encountered any problem , Reply Here with full error message
S7262 Totally black screen.Internal sound after one of the two files in the zip .
Remove the fist file.After BOOTSPL_S7262XXUAMJ3.tar, still white screen when trying recovery.
After going stock, everything ok but "e:missing bitmap icon_att_fota_installing" when in recovery.
WTF !!! I flashed the tar file and the phone just died.. This is no fix, please do not use these files...
S7262 bricked
This is Bogus. Help me. First I flashed BOOTSPL_S7262XXUAMJ3 as mentioned, then lot of grey lines started coming on the screen instead of Samsung pro GT S 7262. Then I used odin and flashed the other file which came out of whitefixS7262.rar that is BOOTSPL_S7262JVUANB2.tar. After flashing the second file, my phone just bricked. None of the buttons are working now, neither the phone is getting booted, nor I can go to download mode or any mode. PLEASE HELP AS MY PHONE IS BRICKED AFTER DOING THIS.
zeetherocker said:
WTF !!! I flashed the tar file and the phone just died.. This is no fix, please do not use these files...
Click to expand...
Click to collapse
please help me if you fixed the problem, I too followed the tutorial and my phone is dead, I cant even enter into download mode
---------- Post added at 05:07 AM ---------- Previous post was at 05:05 AM ----------
I just flashed your file, Now I get a white screen on all modes, I cant even enter into download mode after flashing the file given you, please help me
Chandradev said:
please help me if you fixed the problem, I too followed the tutorial and my phone is dead, I cant even enter into download mode
---------- Post added at 05:07 AM ---------- Previous post was at 05:05 AM ----------
I just flashed your file, Now I get a white screen on all modes, I cant even enter into download mode after flashing the file given you, please help me
Click to expand...
Click to collapse
I did fix it. It was a long time back and I don't remember all that well. But from what I can recall, the phone is actually functional only the display does blank. So imagine that your display is broken and try to boot into download mode. once you are confident enough that you are in the download mode press vol up and then it should show up on Odin. after this point you just need to flash the stock files. I know I'm late in replying but if you still have the problem, this should help
---------- Post added at 10:19 PM ---------- Previous post was at 10:12 PM ----------
jai2061 said:
This is Bogus. Help me. First I flashed BOOTSPL_S7262XXUAMJ3 as mentioned, then lot of grey lines started coming on the screen instead of Samsung pro GT S 7262. Then I used odin and flashed the other file which came out of whitefixS7262.rar that is BOOTSPL_S7262JVUANB2.tar. After flashing the second file, my phone just bricked. None of the buttons are working now, neither the phone is getting booted, nor I can go to download mode or any mode. PLEASE HELP AS MY PHONE IS BRICKED AFTER DOING THIS.
Click to expand...
Click to collapse
check my post below
this file is really working
thanks
zeetherocker said:
WTF !!! I flashed the tar file and the phone just died.. This is no fix, please do not use these files...
Click to expand...
Click to collapse
Thish is WORK!!!!!!!!!!!!!!
Flashing ***AMJ3 & wipe Factory reset after wipe Cash Partition
Hello everyone I'm new to Androids world.My curiosity to customize my stock android landed me in XDA site.I have flashed a cwm recovery in my Samsung GT s 7262 recently but I ended up in white light screen on my recovery.After continous searching for solution I reached a YouTube video of LogansDroid video (link updated) How to fix white screen in Samsung Galaxy star dated Nov 21, 2016) about fixing white screen.In description of video link is provided for cwm recovery to fix white screen yesterday I flashed the zip using Odin 3 & to my surprise I was able to get cwm recovery instead of white screen.Guys give a try u may also be able to fix ur device problem. Don't blame me for anything that happens to ur device.If u r ready to risk u may also gain solution to ur problem.Guys sorry for not able to attach the recovery tar file in that link that's y I have clearly written the videos title so that u can find it easily.I tried to attach the file but it says this cannot be done.Happy Flashing.
don`t work
give life to ur dead phone
i too used this in odin but my mobile got dead
very bad people do post these type of wrong files. if u dont know then please dont post anything in this forum rather u sit calm.
after flashing i got white screen and it is not going to nor recovery mode nor download mode.
even it doesnt power up with samsung logo.
atlast i tried to do with usb dongle jig but failed . i didnt got any help from that jig. money wasted
but atlast i gave life to my samsung gts7262 without using any mechanical steps lyk using Riff box jtag.
i done it with my computer and with odin.
soo if u wanna know how to gv life to ur dead phone then reply to my message i may help you.
Help
subratmunnu said:
i too used this in odin but my mobile got dead
very bad people do post these type of wrong files. if u dont know then please dont post anything in this forum rather u sit calm.
after flashing i got white screen and it is not going to nor recovery mode nor download mode.
even it doesnt power up with samsung logo.
atlast i tried to do with usb dongle jig but failed . i didnt got any help from that jig. money wasted
but atlast i gave life to my samsung gts7262 without using any mechanical steps lyk using Riff box jtag.
i done it with my computer and with odin.
soo if u wanna know how to gv life to ur dead phone then reply to my message i may help you.
Click to expand...
Click to collapse
BRO i have same problem please help me.
[email protected] said:
BRO i have same problem please help me.
Click to expand...
Click to collapse
Pls pls give me the solution i need ur help
subratmunnu said:
i too used this in odin but my mobile got dead
very bad people do post these type of wrong files. if u dont know then please dont post anything in this forum rather u sit calm.
after flashing i got white screen and it is not going to nor recovery mode nor download mode.
even it doesnt power up with samsung logo.
atlast i tried to do with usb dongle jig but failed . i didnt got any help from that jig. money wasted
but atlast i gave life to my samsung gts7262 without using any mechanical steps lyk using Riff box jtag.
i done it with my computer and with odin.
soo if u wanna know how to gv life to ur dead phone then reply to my message i may help you.
Click to expand...
Click to collapse
can u help me with dead phone , this son of b***** posted wrong files and phone got dead,
انا اعلم ان ذلك الحل متاخرا جدا لكننى قمت بنفس الشىء الان ولقد ظهرت الشاشة البيضاء فجربت الملف التانى اختفت الشاشة البيضاء واصبحت الشاشة سوداء
والحل كالتالى
1- اولاقم بتنزيل السوفت وير الاصلى للهاتف
2- تاكد من شحن الهاتف ضعه فقط ع الشاحن واتركه حتى لو نصف ساعة
3-قم بنزع البطارية
4- اضغط ع مفتاح الطاقة+ ومفتاح خفض الصوت+ ومفتاح الرئيسية
5- اضغط مرة اخرى على مفتاح خفض الصوت
6- افتح برنامج اودين كمسئول ثم تاكد من اتصال الهاتف بجهازك الكمبيوتر
7-ضع الروم فى المكان المخصص له pda
8- قم بالضغط على كلمة ابدء
9-انتظر حتى يتم الاكتمال وسوف يعمل الهاتف بشكل طبيعى
اعتذر عن ضعفى فى اللغة الانجليزية يمكنكم الترجمة وسوف اترجم لكم ولكن ببعض الاخطاء اللغوية
i will translate it and i`m sorry because i`m not good in english
to solve this problem
1- download the stock room
2-unplug the battery
3- plug battery and press power+volume down+home buttom
4- press volume down and plug the data cable
5-run odin and put the stock room in pda
6-press start and wait to finish
7- the mobile will start normal