Database Info

Successfully Rooted Ubislate 7ci and installed ClockWorkMod

ROOTING your Ubislate 7ci
DO IT AT YOUR OWN RISK. You could brick your tablet and of course your guarantee will be void
I found this awesome guide in http://forum.xda-developers.com/member.php?u=517426, updated by baudi, I followed the steps to install the adb driver in my laptop and my Ubislate showed up in adb prompt
If windows cannot install driver automatically, choose the option to select it from a directory and point it to the Android SDK.
I did not use the unlockroot.com option though, I used the attached file, with instructions from http://forum.xda-developers.com/showthread.php?t=1929822
It worked for me and I have a rooted Ubislate 7ci. DO IT AT YOUR OWN RISK. You could brick your tablet and of course your guarantee will be void

ClockWorkMod recovery working
I have used the attached file to install ClockWorkMod recovery. As always, DO IT AT YOUR OWN RISK. You could brick your tablet.
This is not custom written for Ubisate 7ci. This is CWM recovery provided for A13 tablets, which works in Ubislate, since the kernel is similar / same. PLEASE NOTE, since Ubisate 7ci does not have a hardware back button, we cannot use it effectively.
VOL INCREASE - UP
VOL DECREASE - DOWN
POWER - SELECT
After performing the required action, for example backup, press VOL DECREASE and POWER at the same time to shutdown the tablet.

Can you tell me the kernel version and other hardware of your device , i have 7c+ and looking for working CWM recovery so if same will work for me that would be great. Otherwise if you have any recovery detail about 7C+ then please share... I dont even know how to boot into recovery

srinivask82 said:
I have used the attached file to install ClockWorkMod recovery. As always, DO IT AT YOUR OWN RISK. You could brick your tablet.
This is not custom written for Ubisate 7ci. This is CWM recovery provided for A13 tablets, which works in Ubislate, since the kernel is similar / same. PLEASE NOTE, since Ubisate 7ci does not have a hardware back button, we cannot use it effectively.
VOL INCREASE - UP
VOL DECREASE - DOWN
POWER - SELECT
After performing the required action, for example backup, press VOL DECREASE and POWER at the same time to shutdown the tablet.
Click to expand...
Click to collapse
will it work on 7c+ ?

srinivask82 said:
I have used the attached file to install ClockWorkMod recovery. As always, DO IT AT YOUR OWN RISK. You could brick your tablet.
This is not custom written for Ubisate 7ci. This is CWM recovery provided for A13 tablets, which works in Ubislate, since the kernel is similar / same. PLEASE NOTE, since Ubisate 7ci does not have a hardware back button, we cannot use it effectively.
VOL INCREASE - UP
VOL DECREASE - DOWN
POWER - SELECT
After performing the required action, for example backup, press VOL DECREASE and POWER at the same time to shutdown the tablet.
Click to expand...
Click to collapse
will this work on ubislate 7c+ ?"

utsav17 said:
will this work on ubislate 7c+ ?"
Click to expand...
Click to collapse
Anybody? Will this work for Ubislate 7C+?

nitin.chobhe said:
Anybody? Will this work for Ubislate 7C+?
Click to expand...
Click to collapse
There are lot of threads to root 7C+ (Gingerbread). I am not sure this will work, this is tested only in ICS.

Re: Successfully Rooted Ubislate 7ci
Can you please post links? I searched a lot but couldn't find even a single one.
Thanks in advance...
Sent from my Nexus 4 using xda app-developers app

nitin.chobhe said:
Can you please post links? I searched a lot but couldn't find even a single one.
Thanks in advance...
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I got Ubislate 7+ and 7C+ confused. Sorry about that
Ubislate 7C+ shares the same specs as 7Ci other than the GPRS module, so this root should work, in theory. As always, use it at your discretion

nitin.chobhe said:
Can you please post links? I searched a lot but couldn't find even a single one.
Thanks in advance...
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
srinivask82 said:
I got Ubislate 7+ and 7C+ confused. Sorry about that
Ubislate 7C+ shares the same specs as 7Ci other than the GPRS module, so this root should work, in theory. As always, use it at your discretion
Click to expand...
Click to collapse
Guys If you dont mind can you please install SuperSu or Root Checker App from Play Store And check your Tab is already rooted... because i got 2 7C+ and both are rooted and overclocked...
Please check and confirm...

shubhdeep99 said:
Guys If you dont mind can you please install SuperSu or Root Checker App from Play Store And check your Tab is already rooted... because i got 2 7C+ and both are rooted and overclocked...
Please check and confirm...
Click to expand...
Click to collapse
That is a great tip. I heard few other generic Chinese devices coming as unlocked. Thanks for the info.
From your signature it seems that you are a pro, can you please start working on Jellybean for Ubislate 7C*?

srinivask82 said:
That is a great tip. I heard few other generic Chinese devices coming as unlocked. Thanks for the info.
From your signature it seems that you are a pro, can you please start working on Jellybean for Ubislate 7C*?
Click to expand...
Click to collapse
We can start bro but we dont have any backup for recover from bootloop and also over Boot loader is locked so we can not use CWM recovery... But we still can do maythings if Datawind provide us Firmware(Rom) of Ubislate 7C+ and also flashing tool of same firmware for backup for our device. As i heard somewhere that our device is based on allwinner (a chines mobile maker co.) and its chipset never bricked so we can do lots of thing if they support us...
So just push datawind to give us firmware of our tab ... just contact them by phone, mail and ask for this...
Edit:- Have you checked your tab is rooted or not?

shubhdeep99 said:
We can start bro but we dont have any backup for recover from bootloop and also over Boot loader is locked so we can not use CWM recovery... But we still can do maythings if Datawind provide us Firmware(Rom) of Ubislate 7C+ and also flashing tool of same firmware for backup for our device. As i heard somewhere that our device is based on allwinner (a chines mobile maker co.) and its chipset never bricked so we can do lots of thing if they support us...
So just push datawind to give us firmware of our tab ... just contact them by phone, mail and ask for this...
Edit:- Have you checked your tab is rooted or not?
Click to expand...
Click to collapse
I rooted my tab using the process which I have written above, so no way to know whether it was rooted before. Also, I have installed CWM recovery in my 7Ci, It worked with one major flaw, Cannot go back in menu (since the CWM designed was not for this tab and 7Ci does not have a physical back button). I used this CWM to take a backup and Since it cannot comeout, I kept on pressing Vol down and power key till my tab shutdown.
ClockWorkMod recovery working
FY - I should have stopped here, but went too far and installed CWM touch and screwed my TAB, now it is in bootloop. I have even tried draining the battery, still no luck.

srinivask82 said:
I rooted my tab using the process which I have written above, so no way to know whether it was rooted before. Also, I have installed CWM recovery in my 7Ci, It worked with one major flaw, Cannot go back in menu (since the CWM designed was not for this tab and 7Ci does not have a physical back button). I used this CWM to take a backup and Since it cannot comeout, I kept on pressing Vol down and power key till my tab shutdown.
ClockWorkMod recovery working
FY - I should have stopped here, but went too far and installed CWM touch and screwed my TAB, now it is in bootloop. I have even tried draining the battery, still no luck.
Click to expand...
Click to collapse
Thanks for sharing.. sucks that you're stuck in a boot loop though. :-/
I have CWM working on my Ubislate 7C+ as of now.

Cyber-Logic said:
Thanks for sharing.. sucks that you're stuck in a boot loop though. :-/
I have CWM working on my Ubislate 7C+ as of now.
Click to expand...
Click to collapse
What?
Really Can you give me the link of that CWM Recovery?

shubhdeep99 said:
What?
Really Can you give me the link of that CWM Recovery?
Click to expand...
Click to collapse
Lol, it's the same one which was posted here!
See my post here, I tried all this about an hour ago:
http://forum.xda-developers.com/showthread.php?t=2161965&page=4
I used the link posted by Utsav17.

shubhdeep99 said:
We can start bro but we dont have any backup for recover from bootloop and also over Boot loader is locked so we can not use CWM recovery... But we still can do maythings if Datawind provide us Firmware(Rom) of Ubislate 7C+ and also flashing tool of same firmware for backup for our device. As i heard somewhere that our device is based on allwinner (a chines mobile maker co.) and its chipset never bricked so we can do lots of thing if they support us...
So just push datawind to give us firmware of our tab ... just contact them by phone, mail and ask for this...
Edit:- Have you checked your tab is rooted or not?
Click to expand...
Click to collapse
Hi shubhdeep99,
What all things one needs to start working on JB for Ubislate 7C+? Now as CWM recovery is working with this tab can you please start working on it? Let us know if you need any help regarding this.
Thanks!
Nitin
---------- Post added at 09:50 PM ---------- Previous post was at 09:49 PM ----------
shubhdeep99 said:
Guys If you dont mind can you please install SuperSu or Root Checker App from Play Store And check your Tab is already rooted... because i got 2 7C+ and both are rooted and overclocked...
Please check and confirm...
Click to expand...
Click to collapse
Installed SuperSu and it says that the tablet is rooted. You were right this tab is pre-rooted...

Multiple users reported success
I soft bricked my Ubislate 7Ci by installing incompatible recovery, got it fixed thru datawind tech support (They fixed and sent it in few days :victory
I rooted again using this procedure and it worked again. I have tested twice :good:

srinivask82 said:
I have used the attached file to install ClockWorkMod recovery. As always, DO IT AT YOUR OWN RISK. You could brick your tablet.
This is not custom written for Ubisate 7ci. This is CWM recovery provided for A13 tablets, which works in Ubislate, since the kernel is similar / same. PLEASE NOTE, since Ubisate 7ci does not have a hardware back button, we cannot use it effectively.
VOL INCREASE - UP
VOL DECREASE - DOWN
POWER - SELECT
After performing the required action, for example backup, press VOL DECREASE and POWER at the same time to shutdown the tablet.
Click to expand...
Click to collapse
I have installed this recovery it works but there is no key combination to go recovery mode when tab is off.
We can go when tab is on.
Second thing we can't use backup if tab is not booted, we can use backup via cwm recovery only.
Right?

CWM Recovery
ahirwar said:
I have installed this recovery it works but there is no key combination to go recovery mode when tab is off.
We can go when tab is on.
Second thing we can't use backup if tab is not booted, we can use backup via cwm recovery only.
Right?
Click to expand...
Click to collapse
You can press the VOL UP button (keep on pressing) and press the power button. Keep on pressing both buttons till you enter recovery. If the CWM installation is not proper you will get the default recovery which is not working well in Ubislate.
The only thing which is not possible in CWM in 7Ci is going back thru the menu. I always long press the power button to shut the tablet down after I finish my work in CWM and turn the table ON in the usual way. It always works for me.
PS: Taking a backup should be the first thing you do, It had saved me quite a few times.

UBISLATE 7C+ Stock Rom and Flash Tool

Hello Everyone Sorry for Delay i was out of City so... thats why.. i was not able to share or update it..
So now wait is over i got Ubislate 7c+ Full Stock ROM from Datawind office and Livesuit to flash. So now you can try to build custom rom and can try other rom's and can test it..
Here is the UBISlate Datawind Stock ROm
Click Here to Download UBISLATE 7C+ Stock Rom
Click here to download LiveSuit Flasher
Step by Step Guide
1. Put Your Ubislate off means complete power off
2. Run Livesuite
3. Select/Open UBI Slate stock Img File
4. Plug oneside of Data cable to computer only to computer not with Tablet (rember)
5. Now keep pressing and holding Volume up+ button and now attach data cable with tablet ( UBISLATE)
6. Now Popup of live suite will say Yes and again Yes press yes both times and ... release the volume up+ button
7. Now update will start.... wait for 5 min
8. 100% up gradation complete
:good:Now enjoy your UBISLATE ONCE AGAIN ENJOY
Enjoy Just

Uploaded or not?
What Happend Brother ,,uploading complete or not?

What a good news you got!
Now if you're telling us all truth, and this is original firmware, then this device is now un-brickable. In case of bootloop, we can go to flash mode with some pin and key combination and flash back to stock. And in case bootloader failed to load (hard brick), this device automatically goes to flash mode (kinda fail safe) and we can get back our working device. This is all because of Allwinner A13 board. It's not a work of Datawind.
Another thing is that, I can start development, because I know there way to recover back.
I hope you really got the firmware and you'll upload it soon.
Thank you.

Hello Friends for those with stuck on android n forgotten password
TRY >> http://j.gs/205J
it helped me
n please comment if it helps u to
ENJOY

ubislate 7c + rom
simars said:
Hello Every...
So now wait is over i got Ubislate 7c+ Full Stock ROM from Datawind office and Livesuit to flash. So now you can try to build custom rom and can try other rom's and can test it..
Here is the UBISlate Datawind Stock ROm
Uploading Please wait it will take 1 Hour around 240Mb
Enjoy Just
Click to expand...
Click to collapse
Where is your upload man???
Have you uploaded or not?
I got same problem, device is not booting only datawind logo
on the screen. I told about it to datawind, they said that they
Will send me link for rom zip, I asked "device is not booting then
How to possible to insert zip file into device "
they told " card should be formatted where zip pasted, then you
Can use that file "
But they didn't send me any mail in 24 hours.
Info for developer .....thanks

ahirwar said:
Where is your upload man???
Have you uploaded or not?
I got same problem, device is not booting only datawind logo
on the screen. I told about it to datawind, they said that they
Will send me link for rom zip, I asked "device is not booting then
How to possible to insert zip file into device "
they told " card should be formatted where zip pasted, then you
Can use that file "
But they didn't send me any mail in 24 hours.
Info for developer .....thanks
Click to expand...
Click to collapse
yea there are 2 way for flashing
one is flashing using livesuite (this is flashed with fone off-in download mode)
second is by recovery software
just do as instructed in my link or wait for the datawind to send u the file n flash it using livesuite
*NOTE* u should know that tab can connect to pc when the tab is stuck on loading image *

fkardame said:
yea there are 2 way for flashing
one is flashing using livesuite (this is flashed with fone off-in download mode)
second is by recovery software
just do as instructed in my link or wait for the datawind to send u the file n flash it using livesuite
*NOTE* u should know that tab can connect to pc when the tab is stuck on loading image *
Click to expand...
Click to collapse
Have you got any rom for ubislate 7c + ???
If you have .... where is it?

ahirwar said:
Have you got any rom for ubislate 7c + ???
If you have .... where is it?
Click to expand...
Click to collapse
as i said go to this link >>> http://j.gs/205J
n read it n do as it says

fkardame said:
as i said go to this link >>> http://j.gs/205J
n read it n do as it says
Click to expand...
Click to collapse
I want to say something to you, first your link
Is not working, second if you really know
About android then you should give real
link. Third this forum not for your advertising
This is for development so no need to put
advertise link, only put direct link ok Mr.

See here: http://forum.xda-developers.com/showpost.php?p=39546159&postcount=116
That person reported to got stock firmware along with proper instruction to make a bootable SDCard.
Direct Link for the firmware: https://www.dropbox.com/sh/aywf02dd0y2qp2k/Ao2v2JZxvC
Edit: That's original Stock firmware for Ubislate7C+, see explanation here: http://forum.xda-developers.com/showpost.php?p=39623084&postcount=130

ahirwar said:
I want to say something to you, first your link
Is not working, second if you really know
About android then you should give real
link. Third this forum not for your advertising
This is for development so no need to put
advertise link, only put direct link ok Mr.
Click to expand...
Click to collapse
try this >>> http://fkardame.blogspot.in/p/ubislate-7c.html
or find on ur own
enjoy n learn to request not order

callingmedic911 said:
See here: http://forum.xda-developers.com/showpost.php?p=39546159&postcount=116
That person reported to got stock firmware along with proper instruction to make a bootable SDCard.
Direct Link for the firmware: https://www.dropbox.com/sh/aywf02dd0y2qp2k/Ao2v2JZxvC
Edit: That's original Stock firmware for Ubislate7C+, see explanation here: http://forum.xda-developers.com/showpost.php?p=39623084&postcount=130
Click to expand...
Click to collapse
thanks brother for helping me.
I would like to ask one question
Is that original firmware? Because its name is
Wifi8188 something.
.

ahirwar said:
thanks brother for helping me.
I would like to ask one question
Is that original firmware? Because its name is
Wifi8188 something.
.
Click to expand...
Click to collapse
Yes, that is original firmware for Ubislate7C+, please read my explanation (I have explained and proved that is stock firmware). Also, after flashing that file, you will have no longer Datawind's pre-installed (All sh*ty apps, so nothing to worry about).
That name looks weird because, it was automatically generated by compiler according to boards/configuration/driver etc, and looks like Datawind didn't had time to rename that file.
BTW Flash it, you'll have no problems.

callingmedic911 said:
Yes, that is original firmware for Ubislate7C+, please read my explanation (I have explained and proved that is stock firmware). Also, after flashing that file, you will have no longer Datawind's pre-installed (All sh*ty apps, so nothing to worry about).
That name looks weird because, it was automatically generated by compiler according to boards/configuration/driver etc, and looks like Datawind didn't had time to rename that file.
BTW Flash it, you'll have no problems.
Click to expand...
Click to collapse
Phoenixcard not working it stuck after burn MBR.
any suggestion????

ahirwar said:
Phoenixcard not working it stuck after burn MBR.
any suggestion????
Click to expand...
Click to collapse
u can use livesuite n flash that img file u got from the dropbox directly
1. install livesuite drivers
2. open livesuite n select that file u got .
3. press n hold vol down button n insert the usb cable n keep pressing power button till u get warning on ur comp screen
4. press yes n yes
5. it will start flashing
Simple Done
n for ur information that 8188 means it has wifi of rtl8188 n if in case u have rtl 8150 then ur wifi wont work
so try to make a backup of ur device using cwm recovery

Updating Please Wait for 10 Mins
simars said:
Hello Every...
So now wait is over i got Ubislate 7c+ Full Stock ROM from Datawind office and Livesuit to flash. So now you can try to build custom rom and can try other rom's and can test it..
Here is the UBISlate Datawind Stock ROm
Uploading Please wait it will take 1 Hour around 240Mb
Enjoy Just
Click to expand...
Click to collapse
Updating Dear Please wait for 10 mins more

fkardame said:
u can use livesuite n flash that img file u got from the dropbox directly
1. install livesuite drivers
2. open livesuite n select that file u got .
3. press n hold vol down button n insert the usb cable n keep pressing power button till u get warning on ur comp screen
4. press yes n yes
5. it will start flashing
Simple Done
n for ur information that 8188 means it has wifi of rtl8188 n if in case u have rtl 8150 then ur wifi wont work
so try to make a backup of ur device using cwm recovery
Click to expand...
Click to collapse
Boss please give me livesuit and cwm recovery link.
And instruction for install cwm recovery .
I installed successfully stock rom via phoenixcard.
Thanks in advance

ahirwar said:
Phoenixcard not working it stuck after burn MBR.
any suggestion????
Click to expand...
Click to collapse
What is the size of your SDCard? And how're you connecting your SDCard to your PC?
---------- Post added at 09:06 PM ---------- Previous post was at 08:56 PM ----------
fkardame said:
if in case u have rtl 8150 then ur wifi wont work
Click to expand...
Click to collapse
How can same device model have different WiFi boards?

callingmedic911 said:
What is the size of your SDCard? And how're you connecting your SDCard to your PC?
---------- Post added at 09:06 PM ---------- Previous post was at 08:56 PM ----------
How can same device model have different WiFi boards?
Click to expand...
Click to collapse
it does have coz its made with few different manufacturers coz the quantity ordered is very high
so it depends on the manufacturer .. what drivers n hardware they use
but the base is all the same like it has allwinner a13 processor
n allwinner13 support 3 different touchpanel drivers too
n 2 wlan driver n 3-4 sensor drivers n 2 diff camera driver
so all the best with using the file
i had one ubislate without sim i almost downloaded 44 flash files n got the right one finally
coz in some touch was not working in some camera in some sensor
but finally got the right file... thats what my experience says
take care n be safe before flashing as u can take the backup of ur device before flashing the given file
---------- Post added at 01:16 PM ---------- Previous post was at 01:10 PM ----------
ahirwar said:
Boss please give me livesuit and cwm recovery link.
And instruction for install cwm recovery .
I installed successfully stock rom via phoenixcard.
Thanks in advance
Click to expand...
Click to collapse
livesuite link >>> http://j.gs/2184 (Skip ad)
cwm recovery link >>> http://j.gs/205Z(skip ad)
n method to
Method:
1: Connect the tab to pc n install driver
2: Start the tab n activate usb debugg in tur tab
3: Flash Cwm recovery by clicking recovery for ics and follow the instruction
4: Click reboot to recovery.

ubislate 7c+
adb is not working in ubislate 7c+ ,
Already installed sdk adb in my pc. But adb not recognized
Ubislate 7c+ . Datawind don't care about customer problem.
it stucks on datawind logo

[Guide] How to Unbrick Micromax Canvas 2 Plus A110Q

Hi everyone, this is a guide that help you to unbrick Micromax Canvas 2 Plus A110Q.
Follow all the steps carefully
1. Download the stock rom v1 from here . Do not download stock rom v2 from anywhere, that rom contain many bugs.
2. Download sp flash tools form here. (tool needed for flashing rom on the device)
3. Download USB drivers from here
Now you need to install the usb preloader drivers you just downlaoded.
To install the drivers:-
1.Extract the USB drivers.rar file.
2.Switch off your phone
3.Open device manager(search for "Device Manager") or click on computer properties , then device manager..
4.Connect your phone in OFF state
5.There will be a device named "mt65xx preloader" which will be there for some seconds.
You need to be quick at this. As soon as it is displayed, right click and click update driver.
Browse manually the files from usb drivers you extracted.
NOTE: THIS METHOD WILL NOT WORK ON WINDOWS 8
Now, if you are using windows 8 do this to install the drivers:
1. Dwonlaod the usb driver.rar file.
2. Hover pointer to Top Right corner of your screen, choose Settings from sidebar
3.Click last option "Change PC Settings"
4.Select "General"
5.Scroll to end and find "Restart Now" under "Advanced Startup". PC Will be in troubleshoot mode now
6.Once screen is back, select option "Troubleshoot"
7.Select "Advanced Options"
8.Select "Startup Settings"
9.Select "Restart"
Now important step. There will be several options to select from. You need to select "Option 7". For this press "7" key from number pad.
After your PC starts, follow above steps.
10. Choose the win 7 file from usb drivers.rar file to install drivers on windows 8 .
Now,
4. Extract ROM and Flash Tool
5. Open Flash_tool.exe from SP_FLASH Tools.
6.Select "Scatter-loading" and select "MT6589_Android_scatter_emmc.txt" from ROM folder
7.Select "Download" option, it will search for phone now.(if does not detect your phone pull the battery out and put it in again.)
8.Switch OFF the phone.
9.Connect it with USB (in OFF state only) (proper divers must be installed as said above)
10.If all goes well you'll see data transfer. At the end there will be Green Circle in middle of screen which means ROM is flashed.(don't panic if there is no green circle just let it work for 10 minutes and unplug your phone from computer.)
11.Remove phone, Switch it ON.

Thanks
Thanks for this guide. I think I bricked my Canvas2+. So I'm trying this now.

I tried this and it worked. Successfully unbricked my phone.
Sent from my IQ446 Magic using Tapatalk

supersapien said:
Thanks for this guide. I think I bricked my Canvas2+. So I'm trying this now.
Click to expand...
Click to collapse
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
---------- Post added at 10:39 AM ---------- Previous post was at 10:25 AM ----------
rahulbasu2013 said:
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
Click to expand...
Click to collapse
I rooted my phone using "Framaroot app" by Boromir exploit and also installed Superuser.
Using ROM Toolbox pro, I changed the system font on my device.
But when I tried to revert to the system font, the phone wont turn on; (I also forgot to take a Nandroid backup)
The phone gets stuck at the boot logo.
I can enter recovery mode, and I also factory reset my phone, wiped cache, etc, but its of no use (first it turns on and then after the boot logo animation, nothing happens....)
Is my phone bricked????
Please help.......

rahulbasu2013 said:
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
---------- Post added at 10:39 AM ---------- Previous post was at 10:25 AM ----------
I rooted my phone using "Framaroot app" by Boromir exploit and also installed Superuser.
Using ROM Toolbox pro, I changed the system font on my device.
But when I tried to revert to the system font, the phone wont turn on; (I also forgot to take a Nandroid backup)
The phone gets stuck at the boot logo.
I can enter recovery mode, and I also factory reset my phone, wiped cache, etc, but its of no use (first it turns on and then after the boot logo animation, nothing happens....)
Is my phone bricked????
Please help.......
Click to expand...
Click to collapse
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.

supersapien said:
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
Click to expand...
Click to collapse
ok thanks...

rahulbasu2013 said:
ok thanks...
Click to expand...
Click to collapse
There is a thanks button

Plz help
supersapien said:
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
Click to expand...
Click to collapse
hey bro i also have same problem and my phone everytime stuck on bootloop but i am out of town now so is there any to flash stock rom using cwm
Thanks in advance

Plz
Samuel117 said:
hey bro i also have same problem and my phone everytime stuck on bootloop but i am out of town now so is there any to flash stock rom using cwm
Thanks in advance
Click to expand...
Click to collapse
Not any reply plz reply guys i need help

Hey I'm using Windows 8.1 pro... so any help?????
---------- Post added at 09:34 PM ---------- Previous post was at 09:30 PM ----------
Samuel117 said:
Not any reply plz reply guys i need help
Click to expand...
Click to collapse
How did you get into that problem?????
and can you describe in detail?

Using fastboot
rahulbasu2013 said:
Hey I'm using Windows 8.1 pro... so any help?????
---------- Post added at 09:34 PM ---------- Previous post was at 09:30 PM ----------
How did you get into that problem?????
and can you describe in detail?
Click to expand...
Click to collapse
i tried fastboot but not any keys work when i tried to go back so i remove my phone battery and when i put battery again and tried to switch on it stucked on bootlogo

Samuel117 said:
i tried fastboot but not any keys work when i tried to go back so i remove my phone battery and when i put battery again and tried to switch on it stucked on bootlogo
Click to expand...
Click to collapse
did you try the unbricking guide??? did that help??

No
rahulbasu2013 said:
did you try the unbricking guide??? did that help??
Click to expand...
Click to collapse
cant able to use those step out of town now not have pc here

It didn't Work.
I did everything correctly, the green circle appeared, still stuck on bootloop. HELP PLZ.

bluetooth not working
hey guyz i have installed custom rom lewa os5 in my canvas a110q, every things works fine but bluetooth is not working. is it rom problem or something else. is there any solution for this? kindly reply me [email protected] thnx.

anyone helpme frnds
i installed kitkat rom and now my phone is gets bugging when i lock phn it wont unlock again display was not coming
what i want to do???????????

sai teja badri said:
i installed kitkat rom and now my phone is gets bugging when i lock phn it wont unlock again display was not coming
what i want to do???????????
Click to expand...
Click to collapse
Flash v1 and then flash any rom or uboot.bin of v1 via sp tools
Sent from my C2305 using Tapatalk

guyz it cnat detect my phone on device manager....
in other devices in device manager...it shows micromax a110q and the phone just boots ....
plz help

What happened is that, i haven't rooted my phone yet and out of no where it goes into bootloop.
I followed all the steps from installing the drivers - till getting the green circle, but no success
Can you please help me?

Will it help ?
I have the same problem on Phone stuck on boot up....
I Never did any rooting/other software updates to my mobile.
The Problem started when a message like "some XYZ process has stopped"
I clicked OK but the message came 1 after the other many times so I though of rebooting mobile.... I gave reboot option and the problem raised and the phone never did start up. I tried factory reset but still the same........A friend suggested me this But i still want to confirm is it harmless to use this and is this the proper technique for my problem ?
Please Help Me....

[Q] Please Help, Samsung grand quattro gt-i8552 stuck in CWM Recovery

Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks

sturkish said:
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
Click to expand...
Click to collapse
Can you boot into download/odin mode?

Hi I have the solution !!!
sturkish said:
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
Click to expand...
Click to collapse
Download this file
Code:
https://www.mediafire.com/?2dkdp5etfa9g2by
copy this file to your sd card..
then boot your phone normally and it will go into cwm mode as you mentioned ...
Select apply update zip from sd card...
Select the file you downloaded...
If it prompts select yes.... Your phone will boot into normall mode....
If you want all your contacts and smses backup you can do this by mobogenie software...
Hope it helps... if not message me... And dont forget to press thnx..

Yes
Kobro said:
Can you boot into download/odin mode?
Click to expand...
Click to collapse
Yes i can go to downloading mode but unfortunately odin can`t detect my phone.

Thanks Buddy
Thank you So much, let me give it a shot and let you know

sturkish said:
Yes i can go to downloading mode but unfortunately odin can`t detect my phone.
Click to expand...
Click to collapse
Then maybe its a driver problem? try downloading "samsung drivers for mobile phones", maybe that will let you get into odin and flash a stock rom.

Cant enter cwm recovery
Anyone can help me,i cant enter cwm recovery even though i press volume up + power + home button.If anyone have any idea tell me pls!!! thx alot!!!:crying:

OP Junior said:
Anyone can help me,i cant enter cwm recovery even though i press volume up + power + home button.If anyone have any idea tell me pls!!! thx alot!!!:crying:
Click to expand...
Click to collapse
wrong procedure bro..
power+home+vol up..hold them together and when phone vibrates then leave the power button but keep on holding the volume up and home button..you will go into you recovery. .
hit thanks ..it will motivate me..dont hesitate..
---------- Post added at 11:29 AM ---------- Previous post was at 11:24 AM ----------
sturkish said:
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
Click to expand...
Click to collapse
hey..just do one more thing in addition with all the things you have done
reflash cwm recovery using odin..but this time tick on auto reboot option..
n u r done!
if it worked please let me know..
and press thanks bro it will motivate me to help out severel peoples who messed up with their phone..

i 8552 stucks on samsung logo
hello all of u i done all as well as u tell above but now i face another problem while i reeboot the set it stucks on samsung logo & mtp drivers are not installing on my system . so due to mtp not installed odin is not working odin i am showing screen shoots of odin
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
after this it is doing nothing
please help me what to do

solution dint work
hi i tried with the file uv mentioned in the mediafire . but still im stuck in cwm mode .. when ever i boot it takes me to cwm mode ... please help ....

solution
gthm.dman said:
hi i tried with the file uv mentioned in the mediafire . but still im stuck in cwm mode .. when ever i boot it takes me to cwm mode ... please help ....
Click to expand...
Click to collapse
im good in English but i can help you, will dont use "reset to bootloader" using CWM, using "volume down+home+power" after the release power and while still holding volume down+home when you got in bootloader now connect your device in ODIN 3.07 it will detected now, change your recovery.tar.md5 using odin, i hope it will work

Didn't work!
archr3d said:
im good in English but i can help you, will dont use "reset to bootloader" using CWM, using "volume down+home+power" after the release power and while still holding volume down+home when you got in bootloader now connect your device in ODIN 3.07 it will detected now, change your recovery.tar.md5 using odin, i hope it will work
Click to expand...
Click to collapse
It's not working...
See.. The phone is booting directly to the CWM recovery..
ADB is working fine... I tested few commands using the cmd prompt and everything was fine..
After the phone enters Downloading mode,Odin couldn't recognize it...
I think Its because the Samsung Mobile USB CDC Composite Device divers are not properly installed in my PC ...
I tried everything to install it but I keep getting the "This device cannot start .Code 10" error...
So,Let me know how to fix this error...And that will solve the problem,I guess..
Thanks.

hello developers,
I have rooted mu samsung galaxy grand quattro. After that I have restored the system to factory reset. And from that time my system is in only CWM recovery. I have shown my phone in the service center as well. Those people are helpless. I guess my OS is missing. Please help me out.
And Thanks a Lot for this wonderful community and your endless support.

Legit Solution
sturkish said:
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
Click to expand...
Click to collapse
Hi there,
I just recently experienced this nightmare where I tried to factory reset my GT-I8552 and all went wrong. As u menioned,my device too got stuck into cwm recovery mode 6.0.4.5.
I searched the whole internet but to no avail. then i thought that my cwm might hv curropted or damaged.So i downloaded the stock cwm for GT-I8552 and flashed it using odin and say what..... my device booted normally!!
Hope this helps!
Currently i cannot send u the link but u can find the stock cwm for gt-i8552 from google!
 @parth3399

swapnilsj said:
hello developers,
I have rooted mu samsung galaxy grand quattro. After that I have restored the system to factory reset. And from that time my system is in only CWM recovery. I have shown my phone in the service center as well. Those people are helpless. I guess my OS is missing. Please help me out.
And Thanks a Lot for this wonderful community and your endless support.
Click to expand...
Click to collapse
Flash the cwm compactible to ur device using odin.... Worked for me !

I have also same issue and still stuck with this... please help..
bbsankarreddy said:
It's not working...
See.. The phone is booting directly to the CWM recovery..
ADB is working fine... I tested few commands using the cmd prompt and everything was fine..
After the phone enters Downloading mode,Odin couldn't recognize it...
I think Its because the Samsung Mobile USB CDC Composite Device divers are not properly installed in my PC ...
I tried everything to install it but I keep getting the "This device cannot start .Code 10" error...
So,Let me know how to fix this error...And that will solve the problem,I guess..
Thanks.
Click to expand...
Click to collapse
:
i have also same issue and i'm still stuck with this... please help .. i have install lot of drivers but the device did not detect in odin mode... need solution please

this helped me.
forum.xda-developers.com/showthread.php?t=2494471

Hi. I fixed mine by flashing cwm again but this time by ticking the Auto Reboot.

same problem here could you find any solution??
bbsankarreddy said:
It's not working...
See.. The phone is booting directly to the CWM recovery..
ADB is working fine... I tested few commands using the cmd prompt and everything was fine..
After the phone enters Downloading mode,Odin couldn't recognize it...
I think Its because the Samsung Mobile USB CDC Composite Device divers are not properly installed in my PC ...
I tried everything to install it but I keep getting the "This device cannot start .Code 10" error...
So,Let me know how to fix this error...And that will solve the problem,I guess..
Thanks.
Click to expand...
Click to collapse
hey, I am also facing with exact same issue, as I had cosmic ROM installed when i did factory reset from inside ROM it has stuck in bootloop in CWM and not even ODIN is able to recongnize it. I have tried lots of CDC drivers too, it recognizes my phone as LEmobile... I am stuck quite badly please help!!!!!!!!!!!!!!!!!!

heelp!
me too

Leagoo Elite 1 (MTK 6753) Root/TWRP/SuperUser

Leagoo Elite 1 Root/TWRP/SuperUser
I give no guarantee for this to work and take no responsibility for any damage you do to your phone, I have this working 100% on my Leagoo Elite 1 that shipped with version 1013 of firmware.
Installed from Windows 7, I make no claims on other versions of Windows.
REQUIREMENTS:
Functioning brain
ADB Installed correctly (Guides on XDA)
VCOM Drivers (Comes with SP Flash Tool)
SP Flash Tool ( http://spflashtool.com/ )
Stock Rom ( http://www.needrom.com/download/leagoo-elite-1/ )
TWRP Recovery from this post ( http://forum.xda-developers.com/showpost.php?p=63692847&postcount=85 ) (Thanks to yankeeboy)
KingoRoot ( https://www.kingoapp.com/ )
----------------------------------------------------------------------------------------------------------------------------
GUIDE:
Firstly, BACKUP EVERYTHING YOU DO NOT WANT TO LOSE!!!
Flashing any rom will wipe all data from the phone. If there is anything you want to keep, take note of it now and back it all up! If you do not know how to do this, either turn back now, or go find a guide for it.
MAKE SURE YOUR PHONE IS AT LEAST 60% CHARGED SO IT DOES NOT DIE AND BRICK ITSELF WHILE FLASHING
Step 1 - Install/extract all programs mentioned above (ADB, VCOM, SP Flash, KingoRoot) and download Stock Rom and TWRP Recovery. Extract stock rom and twrp recovery from their zip/rar into their own folders.
Step 2 - SETTING UP FOR ROOT
-Open up Sp Flash Tool (flash_tool.exe(run as admin to be safe if applicable))
-Click download tab up the top
-Click Scatter-Loading button
-Navigate to "MT6753_Android_scatter.txt" in the extracted ROM folder
-All sections in the table should fill out with files (If they don't, ensure the rom was extracted properly)
-Turn off your Leagoo Elite 1, disconnect from PC if currently connected and hit the big Download button on SP Flash Tool
-Connect your phone and DO NOT TOUCH ANYTHING UNTIL A GREEN TICK COMES UP FROM SP FLASH TOOL
-Close SP Flash Tool and disconnect phone from PC
-Boot into Android to make sure all is well
Step 3 - PUSHING TWRP RECOVERY TO PHONE
-Open up SP Flash Tool again and it should load up the previous scatter file (If not, simply navigate to the same txt file mentioned in the last section)
-Uncheck all the boxes to make sure you don't reflash the whole Rom
-Click the box underneath LOCATION and across from RECOVERY
-Navigate to the "recovery.img" extracted from the TWRP zip/rar
-Double check the recovery box is the only one checked
-Turn off your Leagoo Elite 1, disconnect from PC if currently connected and hit the big Download button on SP Flash Tool
-Connect your phone and DO NOT TOUCH ANYTHING UNTIL A GREEN TICK COMES UP FROM SP FLASH TOOL
-Close SP Flash Tool and disconnect phone from PC
-Boot into Recovery (Volume Up + Power) to make sure all is well
-Set language if required and reboot back to system (DO NOT INSTALL SUPERSU IF IT ASKS FROM HERE)
Congratulations you now have TWRP Recovery.
Step 4 - ROOT WITH KINGO ROOT
-Connect phone to PC
-Go to phone settings, "General Setting", "About Phone", Tap "Build Number" until it says you are now a developer
-Hit back, go to Developer Options, Turn on USB Debugging and go back to home screen
-Run Kingo Root on PC
-Kingo Root should detect your phone accurately and tell you what to do from here to finish the root
-Wait potentially a VERY long time for everything to install depending on your PC/Internet connection
-If you see a blue app with a tick on your phone screen, then root is good!
-Go to your phone dialer and dial *#*#3646633#*#*
-Swipe right to the "Log and Debugging" tab
-Tap User2Root then Root
-Get "BusyBox" app from Play Store and install busybox (this may not be 100% necessary but makes sure all is installed correctly)
Phone is now rooted, check with any root checker if desired
----------------------------------------------------------------------------------------------------------------------------
From here it is easy to do anything like install Xposed framework and mads etc.
For the Leagoo Elite 1 you will want this version of the framework or a later update of the SDK 22/ARM64 version http://dl-xda.xposed.info/framework/sdk22/arm64/xposed-v86-sdk22-arm64.zip
Just flash using Flash Fire, there are many tutorials for how to do this.

hello, i own a leagoo elite 1 and theres a virus (downloaded via playstore, and grand permitted by mistake) . i used custom recovery to wipe everything, format, flash new rom , etc and virus is still there every time i boot. its a clock wallpaper that comes up and dont let you use touch screen or see behind it.
any idea how to get off this thing?
(i dont even know its name,and no antivirus can even notice it. it was installed as an unroot app via playstore
thanks

Hey mate, sounds like it has made its way into your recovery and is getting through that way. Have you tried using SP Flash Tool to flash a stock rom and stock recovery?
If that doesn't work, or you have tried that already, see if you can reroot, and then freeze the app with Ice Box off the Play Store.
Hope that helps.

hi, thanks for your reply.
i can root , ive done this many times afrer flashing new firmware (stock with stock recovery) to check if virus might be removed, but the main thing is that i dont know the name of virus to remove, or to change its permissions.
i download an unroot tool via playstore. by mistake i gave su permission, and then the phone reboot and stuck in leagoo logo.
after i flash again stock firmware, the virus is always there but i cannot see any app that seems to be the virus....
i root many times via kingoroot without any custom recovery or flashing su via fastboot.
i also yesterday flash custom recovery, and wipe system, and almost everything, but when flashing stock firmware , virus is there.
is there any custom firmware to try?
thanks
---------- Post added at 10:56 AM ---------- Previous post was at 10:46 AM ----------
could you please upload system folders , priv apps folders screenshots (or any screen**** you might think virus might be located, so i can check with my leagoo folders?
please refer to your firmware version so i flash the same and then check.
thanks

Hmmm without knowing which app from the Play Store it was that did this, I don't think I'll be able to help much. If a full flash (system/data/recovery/everything) and wiping dalvik cache etc. hasn't stopped it I'm at a loss for what to do. If you can, try and find the name of the app and I'll look into it
I am using the ROM stated in my guide from NeedRom "X5601_OTD_ELITE_5365U_V1.3.1_S1019-s7yler" direct link to download here: Leagoo Elite 1 ROM V1.3.1 S1019
Try flashing this rom in full if this isn't the one you were using. It works 100% on my phone, no issues at all since install.

i used an "unroot" app (there are two in playstore that comments say that bricked phone) it might be one of them, but theres no unroot app in my phone. its hidden i think...
the rom that you use is a custom one? i have to try a custom one to see if something fix this thing.
i wipe everything, i resize, change format to sd, internal sd, system etc, but its still there.
the only thing that i see in recovery after wipe system, is that i have 3 mb used in system after format system and wipe system. well is there a way to format system via adb ..?
im suspicious about theese three megabytes...
thanks

first of all thank u for instructions on how to instal custom recovery
few months ago i was able to root my phone with kingroot,tried 2 or 3 times before succes
then i did unroot because phone display died and i didnt want to mess with guarantee so i unrooted phone, now when it came back from fixing i didnt manage to root with kingroot even with desktop version, i did everything like u said in instructions and everything is ok but when i try to root, on 75% phone restarts and i get message root failed, i noticed that kingroot app doesnt recognize my phone when i connect it as usb storage but only as mtp device, could that be a problem?
and yeah i managed one time to gain root access when phone restarted, kingo finished his job to 100% and said that it have root access now but when i restart phone it gets stuck on leagoo screen and wont boot.
i entered recovery to try clearind dalvik/cache, phone opened me stock recovery (i flashed philz and it was working when i checked for success) is there anyone who had this issue and how can i fix it, i really need root because of things like cpu control,battery consumption is really big on stand by
for 2400mah battery even a clock is big consumptor
cheers
Edit: cause i did this process few times im not sure that i did that thing with phone dialer code, is it crucial for this. i didnt think it is cause first time i rooted my phone i didnt know about that and it worked for me without it
---------- Post added at 08:16 PM ---------- Previous post was at 07:48 PM ----------
androidenth said:
hi, thanks for your reply.
i can root , ive done this many times afrer flashing new firmware (stock with stock recovery) to check if virus might be removed, but the main thing is that i dont know the name of virus to remove, or to change its permissions.
i download an unroot tool via playstore. by mistake i gave su permission, and then the phone reboot and stuck in leagoo logo.
after i flash again stock firmware, the virus is always there but i cannot see any app that seems to be the virus....
i root many times via kingoroot without any custom recovery or flashing su via fastboot.
i also yesterday flash custom recovery, and wipe system, and almost everything, but when flashing stock firmware , virus is there.
is there any custom firmware to try?
thanks
---------- Post added at 10:56 AM ---------- Previous post was at 10:46 AM ----------
could you please upload system folders , priv apps folders screenshots (or any screen**** you might think virus might be located, so i can check with my leagoo folders?
please refer to your firmware version so i flash the same and then check.
thanks
Click to expand...
Click to collapse
I had similliar issue,I don't know where I downloaded it,app is add contacts.it came out of nowhere when I played game askin g me to install,like when you click on apk file. I found 7 or 8 copies of that apk I cache folder, and deleted them but as soon as I leave that folder new apk appear with same name, later I found two files txt I think,with some numbers and add contact at the end of name and I changed their permission with root explorer, for now I don't have any issues with this app,I can't delete this files but at least I can stop them from working

Anyone else recieved new ota update s160701?
I installed it and still cant get root working without stuck on boot logo, anyone who experience same issue found a working way to root?

skinheadXhc said:
Anyone else recieved new ota update s160701?
I installed it and still cant get root working without stuck on boot logo, anyone who experience same issue found a working way to root?
Click to expand...
Click to collapse
All kind time of day. I apologize in advance for my English. I use a translator. Please help. Some time ago I tried to install root on my phone Leagoo Elite 1. I on XDA forum advised to install the firmware version S1019 I did all the instructions but the phone does not start at all. Not respond to any buttons. I tried to reflash the phone to another firmware version. All versions that I tried just successfully installed but the phone still did not want to run. The only firmware version that ran the phone version S161210. But this version runs very slow. Please give me some advice what should I do?

Hello
I have a leagoo elite 1 and i have a problem with slow charging , i know the phone dosent support fast charge but i dosent mean to charge 3.5 to 4 min 1% , and i want to know if your elite 1 is charging like my elite 1. Any ideas it would help me , and excuse me for my poor englisht but i think you understanding me.

No sound after flashing phone
Hi all,
A couple of days ago I flashed Leagoo Elite 1 with the latest rom. After flashing the phone loudspeaker stopped working. I've downloaded the original rom from Leagoo website (stock rom) and tried to flash the phone again but still don't have sound on loudspeaker.
Just to mention that sound is working when I use the headphones. I guess problem is in problematic firmware.
Any advice how to fix this?
Thanks