Leagoo Elite 1 Root/TWRP/SuperUser
I give no guarantee for this to work and take no responsibility for any damage you do to your phone, I have this working 100% on my Leagoo Elite 1 that shipped with version 1013 of firmware.
Installed from Windows 7, I make no claims on other versions of Windows.
REQUIREMENTS:
Functioning brain
ADB Installed correctly (Guides on XDA)
VCOM Drivers (Comes with SP Flash Tool)
SP Flash Tool ( http://spflashtool.com/ )
Stock Rom ( http://www.needrom.com/download/leagoo-elite-1/ )
TWRP Recovery from this post ( http://forum.xda-developers.com/showpost.php?p=63692847&postcount=85 ) (Thanks to yankeeboy)
KingoRoot ( https://www.kingoapp.com/ )
----------------------------------------------------------------------------------------------------------------------------
GUIDE:
Firstly, BACKUP EVERYTHING YOU DO NOT WANT TO LOSE!!!
Flashing any rom will wipe all data from the phone. If there is anything you want to keep, take note of it now and back it all up! If you do not know how to do this, either turn back now, or go find a guide for it.
MAKE SURE YOUR PHONE IS AT LEAST 60% CHARGED SO IT DOES NOT DIE AND BRICK ITSELF WHILE FLASHING
Step 1 - Install/extract all programs mentioned above (ADB, VCOM, SP Flash, KingoRoot) and download Stock Rom and TWRP Recovery. Extract stock rom and twrp recovery from their zip/rar into their own folders.
Step 2 - SETTING UP FOR ROOT
-Open up Sp Flash Tool (flash_tool.exe(run as admin to be safe if applicable))
-Click download tab up the top
-Click Scatter-Loading button
-Navigate to "MT6753_Android_scatter.txt" in the extracted ROM folder
-All sections in the table should fill out with files (If they don't, ensure the rom was extracted properly)
-Turn off your Leagoo Elite 1, disconnect from PC if currently connected and hit the big Download button on SP Flash Tool
-Connect your phone and DO NOT TOUCH ANYTHING UNTIL A GREEN TICK COMES UP FROM SP FLASH TOOL
-Close SP Flash Tool and disconnect phone from PC
-Boot into Android to make sure all is well
Step 3 - PUSHING TWRP RECOVERY TO PHONE
-Open up SP Flash Tool again and it should load up the previous scatter file (If not, simply navigate to the same txt file mentioned in the last section)
-Uncheck all the boxes to make sure you don't reflash the whole Rom
-Click the box underneath LOCATION and across from RECOVERY
-Navigate to the "recovery.img" extracted from the TWRP zip/rar
-Double check the recovery box is the only one checked
-Turn off your Leagoo Elite 1, disconnect from PC if currently connected and hit the big Download button on SP Flash Tool
-Connect your phone and DO NOT TOUCH ANYTHING UNTIL A GREEN TICK COMES UP FROM SP FLASH TOOL
-Close SP Flash Tool and disconnect phone from PC
-Boot into Recovery (Volume Up + Power) to make sure all is well
-Set language if required and reboot back to system (DO NOT INSTALL SUPERSU IF IT ASKS FROM HERE)
Congratulations you now have TWRP Recovery.
Step 4 - ROOT WITH KINGO ROOT
-Connect phone to PC
-Go to phone settings, "General Setting", "About Phone", Tap "Build Number" until it says you are now a developer
-Hit back, go to Developer Options, Turn on USB Debugging and go back to home screen
-Run Kingo Root on PC
-Kingo Root should detect your phone accurately and tell you what to do from here to finish the root
-Wait potentially a VERY long time for everything to install depending on your PC/Internet connection
-If you see a blue app with a tick on your phone screen, then root is good!
-Go to your phone dialer and dial *#*#3646633#*#*
-Swipe right to the "Log and Debugging" tab
-Tap User2Root then Root
-Get "BusyBox" app from Play Store and install busybox (this may not be 100% necessary but makes sure all is installed correctly)
Phone is now rooted, check with any root checker if desired
----------------------------------------------------------------------------------------------------------------------------
From here it is easy to do anything like install Xposed framework and mads etc.
For the Leagoo Elite 1 you will want this version of the framework or a later update of the SDK 22/ARM64 version http://dl-xda.xposed.info/framework/sdk22/arm64/xposed-v86-sdk22-arm64.zip
Just flash using Flash Fire, there are many tutorials for how to do this.
hello, i own a leagoo elite 1 and theres a virus (downloaded via playstore, and grand permitted by mistake) . i used custom recovery to wipe everything, format, flash new rom , etc and virus is still there every time i boot. its a clock wallpaper that comes up and dont let you use touch screen or see behind it.
any idea how to get off this thing?
(i dont even know its name,and no antivirus can even notice it. it was installed as an unroot app via playstore
thanks
Hey mate, sounds like it has made its way into your recovery and is getting through that way. Have you tried using SP Flash Tool to flash a stock rom and stock recovery?
If that doesn't work, or you have tried that already, see if you can reroot, and then freeze the app with Ice Box off the Play Store.
Hope that helps.
hi, thanks for your reply.
i can root , ive done this many times afrer flashing new firmware (stock with stock recovery) to check if virus might be removed, but the main thing is that i dont know the name of virus to remove, or to change its permissions.
i download an unroot tool via playstore. by mistake i gave su permission, and then the phone reboot and stuck in leagoo logo.
after i flash again stock firmware, the virus is always there but i cannot see any app that seems to be the virus....
i root many times via kingoroot without any custom recovery or flashing su via fastboot.
i also yesterday flash custom recovery, and wipe system, and almost everything, but when flashing stock firmware , virus is there.
is there any custom firmware to try?
thanks
---------- Post added at 10:56 AM ---------- Previous post was at 10:46 AM ----------
could you please upload system folders , priv apps folders screenshots (or any screen**** you might think virus might be located, so i can check with my leagoo folders?
please refer to your firmware version so i flash the same and then check.
thanks
Hmmm without knowing which app from the Play Store it was that did this, I don't think I'll be able to help much. If a full flash (system/data/recovery/everything) and wiping dalvik cache etc. hasn't stopped it I'm at a loss for what to do. If you can, try and find the name of the app and I'll look into it
I am using the ROM stated in my guide from NeedRom "X5601_OTD_ELITE_5365U_V1.3.1_S1019-s7yler" direct link to download here: Leagoo Elite 1 ROM V1.3.1 S1019
Try flashing this rom in full if this isn't the one you were using. It works 100% on my phone, no issues at all since install.
i used an "unroot" app (there are two in playstore that comments say that bricked phone) it might be one of them, but theres no unroot app in my phone. its hidden i think...
the rom that you use is a custom one? i have to try a custom one to see if something fix this thing.
i wipe everything, i resize, change format to sd, internal sd, system etc, but its still there.
the only thing that i see in recovery after wipe system, is that i have 3 mb used in system after format system and wipe system. well is there a way to format system via adb ..?
im suspicious about theese three megabytes...
thanks
first of all thank u for instructions on how to instal custom recovery
few months ago i was able to root my phone with kingroot,tried 2 or 3 times before succes
then i did unroot because phone display died and i didnt want to mess with guarantee so i unrooted phone, now when it came back from fixing i didnt manage to root with kingroot even with desktop version, i did everything like u said in instructions and everything is ok but when i try to root, on 75% phone restarts and i get message root failed, i noticed that kingroot app doesnt recognize my phone when i connect it as usb storage but only as mtp device, could that be a problem?
and yeah i managed one time to gain root access when phone restarted, kingo finished his job to 100% and said that it have root access now but when i restart phone it gets stuck on leagoo screen and wont boot.
i entered recovery to try clearind dalvik/cache, phone opened me stock recovery (i flashed philz and it was working when i checked for success) is there anyone who had this issue and how can i fix it, i really need root because of things like cpu control,battery consumption is really big on stand by
for 2400mah battery even a clock is big consumptor
cheers
Edit: cause i did this process few times im not sure that i did that thing with phone dialer code, is it crucial for this. i didnt think it is cause first time i rooted my phone i didnt know about that and it worked for me without it
---------- Post added at 08:16 PM ---------- Previous post was at 07:48 PM ----------
androidenth said:
hi, thanks for your reply.
i can root , ive done this many times afrer flashing new firmware (stock with stock recovery) to check if virus might be removed, but the main thing is that i dont know the name of virus to remove, or to change its permissions.
i download an unroot tool via playstore. by mistake i gave su permission, and then the phone reboot and stuck in leagoo logo.
after i flash again stock firmware, the virus is always there but i cannot see any app that seems to be the virus....
i root many times via kingoroot without any custom recovery or flashing su via fastboot.
i also yesterday flash custom recovery, and wipe system, and almost everything, but when flashing stock firmware , virus is there.
is there any custom firmware to try?
thanks
---------- Post added at 10:56 AM ---------- Previous post was at 10:46 AM ----------
could you please upload system folders , priv apps folders screenshots (or any screen**** you might think virus might be located, so i can check with my leagoo folders?
please refer to your firmware version so i flash the same and then check.
thanks
Click to expand...
Click to collapse
I had similliar issue,I don't know where I downloaded it,app is add contacts.it came out of nowhere when I played game askin g me to install,like when you click on apk file. I found 7 or 8 copies of that apk I cache folder, and deleted them but as soon as I leave that folder new apk appear with same name, later I found two files txt I think,with some numbers and add contact at the end of name and I changed their permission with root explorer, for now I don't have any issues with this app,I can't delete this files but at least I can stop them from working
Anyone else recieved new ota update s160701?
I installed it and still cant get root working without stuck on boot logo, anyone who experience same issue found a working way to root?
skinheadXhc said:
Anyone else recieved new ota update s160701?
I installed it and still cant get root working without stuck on boot logo, anyone who experience same issue found a working way to root?
Click to expand...
Click to collapse
All kind time of day. I apologize in advance for my English. I use a translator. Please help. Some time ago I tried to install root on my phone Leagoo Elite 1. I on XDA forum advised to install the firmware version S1019 I did all the instructions but the phone does not start at all. Not respond to any buttons. I tried to reflash the phone to another firmware version. All versions that I tried just successfully installed but the phone still did not want to run. The only firmware version that ran the phone version S161210. But this version runs very slow. Please give me some advice what should I do?
Hello
I have a leagoo elite 1 and i have a problem with slow charging , i know the phone dosent support fast charge but i dosent mean to charge 3.5 to 4 min 1% , and i want to know if your elite 1 is charging like my elite 1. Any ideas it would help me , and excuse me for my poor englisht but i think you understanding me.
No sound after flashing phone
Hi all,
A couple of days ago I flashed Leagoo Elite 1 with the latest rom. After flashing the phone loudspeaker stopped working. I've downloaded the original rom from Leagoo website (stock rom) and tried to flash the phone again but still don't have sound on loudspeaker.
Just to mention that sound is working when I use the headphones. I guess problem is in problematic firmware.
Any advice how to fix this?
Thanks
Related
hello guy's
i made a custom rom for galaxy pro
deodxed and rooted & init.d support for GB 2.3.6
and we will use galaxy mini cwm 5.0.2.6 (it's work 100%)
and also custom boot.img
How to use cwm?
use odin to flash cwm recovery and boot.img
as one package and don't forget to use BENNETT_v1.0_2.ops
we can't use cwm by volume or home button
Q=UP : T=DOWN : Z=ENTER : POWER=BACK
AND YOU CAN MAKE BACKUP AND RESTORE
to flash the custom rom you have to mount system and cache and data
after flash the rom you have to make wipe data /reset and wipe cache and wipe dalvik cache
Download boot.img
http://www.mediafire.com/file/3uho1syl5z1j1ls/boot.tar.md5
Download custom rom
http://www.mediafire.com/file/z5y85ffo4kf0ce4/GT-B7510.zip
Download recovery
http://www.mediafire.com/file/7s4ompc1m6jpsuc/recovery.tar.md5
i hope galaxy mini devs to help us
sure i'm not Responsible for any damage
this is great!! but im having trouble when flashing recovery
luy991 said:
this is great!! but im having trouble when flashing recovery
Click to expand...
Click to collapse
use odin to flash recovery and use file attachment unrar it
flash as one package
Hi,
Could you please post more info about the rom, like known issues, whats working and whats not, a2sd scripts to use.
Thanks.
any hopes for multitouch????
is this cyanogen mod??
Detailed installation instructions & screenshots plz
Would be great if you could provide detailed installation instructions & ROM info and screenshots please...
Has anyone ever try that rom? No information ,no pictures. Nothing ... Just explanation and download link
success
Hello everyone!
I tried to install cwm-recovery (for Galaxy Mini) and author's firmware and that was successful.
I had:
1. Odin v4.38.
2. Stock firmware (Android 2.3.6) rooted by "universal_gb_root_v19.zip".
3. Installed application "Quick Boot (Reboot)" (You can find in Google Play Store).
I did (my way):
1. Power off phone.
2. Long press "Q"+"Power button" (you will see picture with text "Downloading...").
3. Press button "OPS" and select BENNET file.
4. Press button "BOOT" and select "boot.tar.md5" (you will see error, but it's normal).
5. Press button "One Package" and select "recovery.tar.md5".
6. Select checkbox "One Package".
7. Press button "Start" and wait.
8. Phone will be reboot.
9. Launch on the phone application "Quick Boot" and press "Recovery".
10. Phone will be loaded in "CWM Recovery".
11. You can flash author's firmware "GT-B7510.zip" (WARNING: don't work Wi-Fi after flashing!!!)
gnomba said:
Hello everyone!
I tried to install cwm-recovery (for Galaxy Mini) and author's firmware and that was successful.
I had:
1. Odin v4.38.
2. Stock firmware (Android 2.3.6) rooted by "universal_gb_root_v19.zip".
3. Installed application "Quick Boot (Reboot)" (You can find in Google Play Store).
I did (my way):
1. Power off phone.
2. Long press "Q"+"Power button" (you will see picture with text "Downloading...").
3. Press button "OPS" and select BENNET file.
4. Press button "BOOT" and select "boot.tar.md5" (you will see error, but it's normal).
5. Press button "One Package" and select "recovery.tar.md5".
6. Select checkbox "One Package".
7. Press button "Start" and wait.
8. Phone will be reboot.
9. Launch on the phone application "Quick Boot" and press "Recovery".
10. Phone will be loaded in "CWM Recovery".
11. You can flash author's firmware "GT-B7510.zip" (WARNING: don't work Wi-Fi after flashing!!!)
Click to expand...
Click to collapse
So that means that no more Wifi fr the Galaxy PRO, so is that no worth, is it?
So flashing that ROM, is just a waste coz no more Wifi mmmm I don't know what to do... D:
kevin_uzumaki said:
So that means that no more Wifi fr the Galaxy PRO, so is that no worth, is it?
So flashing that ROM, is just a waste coz no more Wifi mmmm I don't know what to do... D:
Click to expand...
Click to collapse
I just tried author's method. I was interested in installing CWM and possibility installing from CWM.
So...
gnomba said:
I just tried author's method. I was interested in installing CWM and possibility installing from CWM.
Click to expand...
Click to collapse
So you jsut have the CWM and not a Custom ROM you have the offical and is root, I need some help i don't find anything fr this Smartphone, I had already Flask Xperia's and the SGS that I had but this one... I have no idea D:
HELP PLEASE D:
has anyone done this succesfully without any issues?
custom rom flash
gnomba said:
I just tried author's method. I was interested in installing CWM and possibility installing from CWM.
Click to expand...
Click to collapse
cwm is working fine but after following the steps before and after flashing i am not able to acquire root privelages for any root app(titanium backup) please help me with this:crying:
---------- Post added at 01:23 PM ---------- Previous post was at 01:11 PM ----------
malcolm_cg said:
has anyone done this succesfully without any issues?
Click to expand...
Click to collapse
tried but cannot acquire root privelages for titanium backup and other root apps
is the wifi issue fixed yet?
or have you stopped development?
you could always ask for some devs help
gtb-7510
i installed micromax a80 clockmod recovery in my gtb 7510 (galaxy pro)........its installed perfectly but when i re-started my.....phone......then it didn't came in any mode i.e not in download...or even in recovery mode........!
it is in dead condition.......plz tell me what 2 do ...??
because.....i almost tried every thing......but its not getting on....!
rsdanger said:
i installed micromax a80 clockmod recovery in my gtb 7510 (galaxy pro)........its installed perfectly but when i re-started my.....phone......then it didn't came in any mode i.e not in download...or even in recovery mode........!
it is in dead condition.......plz tell me what 2 do ...??
because.....i almost tried every thing......but its not getting on....!
Click to expand...
Click to collapse
1st que.
From where you got the idea to install clockwork mode of MICROMAX mobile into out galaxy pro??
There is 1st rule of flashing that roms,firmwares,recoveries made for some different phone should not be flashed into some different phone you are using.
So remember that from now on.
Now,
Your current problem.
You are sayin that is does not even start right?
If you connect it to charger, does it show battery logo on screen?
Like the logo we see when phone is switched off & we put it in charging?
sent from my samsung galaxy pro GT-B7510 using xda premium
Hi..similar error here can flash the original rom
i kinda screwed up my Galaxy pro too..i flashed a false rom now..i cant even get my battery charging,download mode etc screens..
but when i hold volume dowm + power+ Q keys for 10 seconds..the phone detects on a computer..all i get is samsung CDMA technologies,modem and serial diag port...also samung usb composite port...
Odin detects the com mpping ..when i start to flash..the process gets stuck on setup connection....
adb doesnt detect it...
power +e and power + r also detected on pc..but no display on pc....
how will i restore my phone...its partially detected on pc!!!
essuraj said:
i kinda screwed up my Galaxy pro too..i flashed a false rom now..i cant even get my battery charging,download mode etc screens..
but when i hold volume dowm + power+ Q keys for 10 seconds..the phone detects on a computer..all i get is samsung CDMA technologies,modem and serial diag port...also samung usb composite port...
Odin detects the com mpping ..when i start to flash..the process gets stuck on setup connection....
adb doesnt detect it...
power +e and power + r also detected on pc..but no display on pc....
how will i restore my phone...its partially detected on pc!!!
Click to expand...
Click to collapse
Well, m inclined to think that ur device is bricked...
If odin cant flash the stock firmware, then i think there is very less you can do.
Is your warranty still available?
I mean is your galaxy pro still under 1 year of purchase?
If so, then you can immediatly rush to samsung customer service centre for best solution.
If you want to try something by yourself,
Then there is 1 method.
I read about it long long ago.
So not sure of it.
It was called something like "usg jig" or "jtag"..not sure though..u can google it if you want to search more on it..
Bt my advice would be to go to customer care if it is in 1 yr of purchase..
sent from my samsung galaxy pro GT-B7510 using xda premium
omg.....nothing else is possible?
well im out of warrenty..and the customer care people say they have to replace the whole motherboard whch costs to 3500Rs..
so i gave up...i tried to explain them it was a software issue but they dont understand....
and i thought the jtag was to get into download mode...where can i get that in india??
essuraj said:
well im out of warrenty..and the customer care people say they have to replace the whole motherboard whch costs to 3500Rs..
so i gave up...i tried to explain them it was a software issue but they dont understand....
and i thought the jtag was to get into download mode...where can i get that in india??
Click to expand...
Click to collapse
Ohh, u r from india?
Nice, me too..
Well, 2 of my frends had their phone bricked..but both were in warranty..so they got device replacement/mother-board replacement for free..
N i knw its very hard to find jtag in india..
N also, i agree that though flashing is software issue, customer care ppl nly do mother-board replacement nly..
N somehow that works..
BTW, what exact error you get when you try to flash with odin?
N what are you trying to flash with odin now? Stock firmware right?
Which one?
sent from my samsung galaxy pro GT-B7510 using xda premium
Hi guys, I bought the above phone off Amazon. I found out this very strange device also had a root-enabled kernel out of the box, but my question is about recovery. I want to install CWM as a first choice, if not that, TWRP, but a Google search only tuns up loose references to MTK6589 which is presumably the SoC, but nothing for my specific model. Currently when I reboot to recovery with any root app it shows 'no command' (maybe there is no recovery installed to the recovery partition?) and when entering bootloader mode the device displays what is seen in the attached photo.
I would appreciate any help on getting a working recovery set up on this device.
Thanks!
Attempting
Shinypaper said:
Hi guys, I bought the above phone off Amazon. I found out this very strange device also had a root-enabled kernel out of the box, but my question is about recovery. I want to install CWM as a first choice, if not that, TWRP, but a Google search only tuns up loose references to MTK6589 which is presumably the SoC, but nothing for my specific model. Currently when I reboot to recovery with any root app it shows 'no command' (maybe there is no recovery installed to the recovery partition?) and when entering bootloader mode the device displays what is seen in the attached photo.
I would appreciate any help on getting a working recovery set up on this device.
Thanks!
Click to expand...
Click to collapse
Hi, I also have one of these phones and have been looking at recovery options with little success.
However I have found a set of instructions in the XDA University about porting CWM. (unfortunalty I can't post a link due to being a Noob, but if you Google 'porting cwm' it should be the top result).
I am going to be attempting to do this once I have got my PC set up dual boot for Linux.
Will post back with news on how it's going. Would appreciate any progress you have made about a recovery option.
Regards
Mad.
first, make a backup of your device using mtk droid tools.
if phone isn`t rooted yet, use this tutorial:http://forum.xda-developers.com/showthread.php?t=2332783
for the recovery, you need to unpack your recovery.img, take the kernel zImage and put it in the cwm-recovery. for mt6589 phones, this one should work: http://forum.xda-developers.com/showthread.php?t=2357875
you can unpack/repack your boot.img with this tools:
http://forum.xda-developers.com/showthread.php?t=1587411
after obtaining new recovery.img, flash it through SP flash tool or mobileuncle tools.
Recovery Quirk
Chrizzly, thanks for the pointers, will be checking out the tools tonight.
Found a quirk though, may just be my phone.
I booted into recovery last night and as expected the "no commands" came up, but then I took the back off the phone and a recovery menu appeared. Had options in there like reboot, delete cache, delete delvik cache....
I'm assuming this is the stock recovery.
I tested it again this morning and booting into recovery and then taking the back off the phone made the menu appear!!
Any one else care to test and see if it's a stock thing or just a quirk of my phone.
replied before, my post disappeared.. this isn`t related to your device , this is recovery-typical. it is showing the android first, without a menu. you need to press hardware buttons, to get into the menu( this is device-specific, you need to try that, also buttons on the touch screen, if there are some) this will usually bring you in recovery MENU. think you accidently pressed one of these buttons while opening the device.
CWM Recovery
Sincerely thank you! But not working on i9389 haipai.White screen and then auto-power
ntn8888 said:
Sincerely thank you! But not working on i9389 haipai.White screen and then auto-power
Click to expand...
Click to collapse
Here you are, this is an archive containing my stock haipai i9389 recovery image and another one already patched with CWM
h t t p s : // mega . co . nz / #!4sAlhCaD!L83eOgs3DD0lVAFFlKy470i--zF1BBp4FdSfpIxpoOg
I hope this can be helpfull for you all ...
haipai i9389 CWM
lovelord said:
Here you are, this is an archive containing my stock haipai i9389 recovery image and another one already patched with CWM
h t t p s : // mega . co . nz / #!4sAlhCaD!L83eOgs3DD0lVAFFlKy470i--zF1BBp4FdSfpIxpoOg
I hope this can be helpfull for you all ...
Click to expand...
Click to collapse
Can not open the link that you provided. There are other ways to help?
https://mega.co.nz/#!4sAlhCaD!L83eOgs3DD0lVAFFlKy470i--zF1BBp4FdSfpIxpoOg
Chrizzly:
Re: Stock recovery. Thought it was a button press that got me in first time but I tried it several times and no button worked just pulling the back off. Little puzzled about that but it's something I can live with!!
lovelord:
Re: Files. Thanks for the files, going to try them out as soon as I can!!
Done
I have got CWM working on my i9389 now, there was a few quirks in getting it going.
The method I used was as posted in the MTK Droid Root & Tools thread by rua1.
TIPS
Leave the battery out when doing read back or flash in Flash Tools.
Not mentioned in the instruction is the MTK vcom drivers which you will need and can be found in the Root tutorial posted by Chrizzly a bit further up.
Make sure you read the instructions by rua1 closely and use the images posted as it's not always straight forward.
Last tip pay attention to where MTK tools puts the files it creates, had me stumped for a bit!! I've never been very good at following instructions!!
Hill-Climber said:
I have got CWM working on my i9389 now, there was a few quirks in getting it going.
The method I used was as posted in the MTK Droid Root & Tools thread by rua1.
TIPS
Leave the battery out when doing read back or flash in Flash Tools.
Not mentioned in the instruction is the MTK vcom drivers which you will need and can be found in the Root tutorial posted by Chrizzly a bit further up.
Make sure you read the instructions by rua1 closely and use the images posted as it's not always straight forward.
Last tip pay attention to where MTK tools puts the files it creates, had me stumped for a bit!! I've never been very good at following instructions!!
Click to expand...
Click to collapse
PLease help me i boot looped my haipai i9389 i then got stock rom from needromDOTcom and it gave me white screen boot up. How can i fix this
ian619420 said:
PLease help me i boot looped my haipai i9389 i then got stock rom from needromDOTcom and it gave me white screen boot up. How can i fix this
Click to expand...
Click to collapse
I managed to boot loop mine while messing with a ROM I made (it's not finished yet) but managed to recover by re-flashing using the Flash Tools a back up I had taken just after installing CWM.
Do you have a back up you can flash?
I have just checked mine and even zipped it's still 800MB so I can't email it to you...
...sure if I looked about I could find somewhere to upload it to for you. PM me if you need this!!
The sd holder broke off, can i buy this http://www.amazon.com/gp/offer-list...w?ie=UTF8&condition=new&qid=1379198350&sr=8-1 the galaxy s3 i9300 sd card slot holder and put it on my haipai i9389? or do i need specific haipai i9389 sd card slot holder.
Hello since i decided to help a friend, everything got bad and I don't know why :/
Before this Tipo I rooted/unlocked Boot-loader and changed the ROM of Wildfire S, Nexus One (cyanogen ones).
Today I started to Make this "Tipo" for a friend and that's why is so important for me the phone to work its not mine ( I usually don't make my life so complicated to make someone's phone, why i did it this time).
So It was with official ROM Unrooted and with Locked Boot-loader and I checked it if its possible to
Unlock the boot-loader It was saying Yes.
I Unlocked the Boot-loader following the instructions with "Unlock SE xperia Boot-loaders 1.6" with no problem,
I know because the phone was Reset after the finish.
After that i was able to Root the phone and I had SU privileges already in the phone and
I started to put CWM.
I first Trued with RecoverX I did everything instaling Sony Pc Companion, usb debugging ,unknown sources, busy box installed(SU privilegies) and RecoverX writed me that its installed successfully.
I try to start CWM after the reboot it was not working, I try about 10 times more, it was not working so I searched another way and i found this -
For Tipo and tipo dual users-cwm_tipo_v6.zip for cwm.For TWRP-TWRP_tipo.zip
1 Unzip It using winrar or 7zip.
2 Connect you phone in usb debugging mode to pc
3 Windows users double click on install.bat.
4 Linux users use terminal to run install.sh.
It worked from the first time!
After that I put this ROM and Gapps on the SD Card
[MIRO/TIPO/J][ROM][4.1.2] Jelly Bean Mini Project Release 5
And I Went into Recovery and I Did this
Wipe Data/Factory Reset
Wipe Cache Patriotion
Advance Wipe Dalvic Cache
Install from SD Card and i find the zip archive of the ROM and the Gapps (from the ROM's directory)
I installed first the ROM after that Gapps (from Install from SD)
After that I went to Reboot System Now
(I usually don't make backup I didn't do it this time too but anyway it wont help I think in this case)
I waited the new ROM to load 10-15 Mins and I saw nothing is happening so I google the ROM and
I reeded that the ROM has sometimes that loop which is just loading for hours and nothing is happening (first boot)
So i took the battery off and I trued to go into Recovery, Sadly the recovery is gone ;(
I trued around 20 times to enter recovery with no success
And now I don't know if I'm able to do something ;( No Recovery No ROM The ROM is already above 1 hour loading
Please somebody to help me with something, or at least to tell me its no point there is nothing I can do
and to look how to buy a new phone for my friend
Try SEUS...!
Simlo said:
Hello since i decided to help a friend, everything got bad and I don't know why :/
Before this Tipo I rooted/unlocked Boot-loader and changed the ROM of Wildfire S, Nexus One (cyanogen ones).
Today I started to Make this "Tipo" for a friend and that's why is so important for me the phone to work its not mine ( I usually don't make my life so complicated to make someone's phone, why i did it this time).
So It was with official ROM Unrooted and with Locked Boot-loader and I checked it if its possible to
Unlock the boot-loader It was saying Yes.
I Unlocked the Boot-loader following the instructions with "Unlock SE xperia Boot-loaders 1.6" with no problem,
I know because the phone was Reset after the finish.
After that i was able to Root the phone and I had SU privileges already in the phone and
I started to put CWM.
I first Trued with RecoverX I did everything instaling Sony Pc Companion, usb debugging ,unknown sources, busy box installed(SU privilegies) and RecoverX writed me that its installed successfully.
I try to start CWM after the reboot it was not working, I try about 10 times more, it was not working so I searched another way and i found this -
For Tipo and tipo dual users-cwm_tipo_v6.zip for cwm.For TWRP-TWRP_tipo.zip
1 Unzip It using winrar or 7zip.
2 Connect you phone in usb debugging mode to pc
3 Windows users double click on install.bat.
4 Linux users use terminal to run install.sh.
It worked from the first time!
After that I put this ROM and Gapps on the SD Card
[MIRO/TIPO/J][ROM][4.1.2] Jelly Bean Mini Project Release 5
And I Went into Recovery and I Did this
Wipe Data/Factory Reset
Wipe Cache Patriotion
Advance Wipe Dalvic Cache
Install from SD Card and i find the zip archive of the ROM and the Gapps (from the ROM's directory)
I installed first the ROM after that Gapps (from Install from SD)
After that I went to Reboot System Now
(I usually don't make backup I didn't do it this time too but anyway it wont help I think in this case)
I waited the new ROM to load 10-15 Mins and I saw nothing is happening so I google the ROM and
I reeded that the ROM has sometimes that loop which is just loading for hours and nothing is happening (first boot)
So i took the battery off and I trued to go into Recovery, Sadly the recovery is gone ;(
I trued around 20 times to enter recovery with no success
And now I don't know if I'm able to do something ;( No Recovery No ROM The ROM is already above 1 hour loading
Please somebody to help me with something, or at least to tell me its no point there is nothing I can do
and to look how to buy a new phone for my friend
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=1849170
it has solution to all types of bricked xperia devices.
or
Ever heard about SEUS (Sony Ericsson Update Service) which is used to recover the device back to stock. you can download it in sony website just google it which is named as Update service.
it can help you to unbrick your device.... Try it..:good::good::laugh:
Hit thanks if i helped you..
Recovered
The phone was recovered by Flashtool with a bit problems and difficulties, but its now with sock firmware and working better than, before!
It was the first and the last time I'm flashing phone which is not mine.
Many thanks gulabsameer I hit thanks for u and for the tread u send me to.
Once more many many thanks!
Thats great...!
Simlo said:
The phone was recovered by Flashtool with a bit problems and difficulties, but its now with sock firmware and working better than, before!
It was the first and the last time I'm flashing phone which is not mine.
Many thanks gulabsameer I hit thanks for u and for the tread u send me to.
Once more many many thanks!
Click to expand...
Click to collapse
Thats great. I'm happy that you unbricked your friends device..!
Enjoy..!
I attempted to install a theme package via RomTool and the tablet became stuck on the bootlogo. Tried to go to boot recovery. Istead of the recovery screen I usually get, I received the Factory boot recovery screen. So, I use the clear eMMC choice, still nothing but bootlogo. I can not seem to get the tablet to boot into the OS in any way. Please help. Thanks.
Android Version: 4.2.2
SW Version: ALPS.JB2.MP V1.9
Build Version: MV7A_31D25_422A
ManYical said:
I attempted to install a theme package via RomTool and the tablet became stuck on the bootlogo. Tried to go to boot recovery. Istead of the recovery screen I usually get, I received the Factory boot recovery screen. So, I use the clear eMMC choice, still nothing but bootlogo. I can not seem to get the tablet to boot into the OS in any way. Please help. Thanks.
Android Version: 4.2.2
SW Version: ALPS.JB2.MP V1.9
Build Version: MV7A_31D25_422A
Click to expand...
Click to collapse
This is a known issue of this thing so best stay away from it from now on .
Now can you factory reset your phone ?
BTW this device has mediatek ,right?
I believe that I do. I wasn't able boot to the recovery that i normally had in the past. Instead it went to a boot recovery I had not seen on this tablet before. The only only choice to a possible recovery was to clear the eMMC. I did that. and still am hung up on the boot logo of android.
ManYical said:
I believe that I do. I wasn't able boot to the recovery that i normally had in the past. Instead it went to a boot recovery I had not seen on this tablet before. The only only choice to a possible recovery was to clear the eMMC. I did that. and still am hung up on the boot logo of android.
Click to expand...
Click to collapse
Dang it ,factory reset usually works
Well as a last resort I would flash my stock firmware but this pretty much means you'll lose your data Unless you haven't backed it up.
BTW can you flash your previous recovery and try to access it again .
Also after emmc wipe you gave it enough time at the bootlogo (10-15 min so it can set things up again),right?
I gave it over 2 hours to set itself up.
I admit I am quite challenged when it comes to Android. I hanen't a clue as to flashing the device. I did have enough common sense to do a back-up to external sd-card prior to attempting the theme update. I downloaded and installed the latest XDA tools onto my PC, but I can't make sense of how to use it.
Any help would be most welcomed. Thank you so far though.
ManYical said:
I gave it over 2 hours to set itself up.
I admit I am quite challenged when it comes to Android. I hanen't a clue as to flashing the device. I did have enough common sense to do a back-up to external sd-card prior to attempting the theme update. I downloaded and installed the latest XDA tools onto my PC, but I can't make sense of how to use it.
Any help would be most welcomed. Thank you so far though.
Click to expand...
Click to collapse
Your phone is mediatek .
Things you'll need are sp flash tool PC ,stock firmware of phone (extracted)
1)download the flash tool and open it
2)select scatter loading ,browse through the extracted stock file and select scatter.txt.
3)now click the download
4)power off your phone and plug it PC through USB
5)wait for success notification
Wait a minute have you tried restoring the backup you made .
---------- Post added at 05:45 PM ---------- Previous post was at 05:10 PM ----------
So i looked up some links for your stock firmware and there isn't many .is your phone under warrenty then best try to take it to store.
Please forgive my ignorance. Will please define "stock"?
As in a standard 4.2.2 OS, or an original build for this tablet Verizon built? I bought the tablet on, Amazon and have no carrier.
Also, with tablet stuck In boot.... when I plug it in via usb, my PC reognises that it is my tablet, yet shows no evidence other than the device manager. Does the application you mention have ability to access my device in it's current state?
How would I go about restoring the back up?
ManYical said:
Please forgive my ignorance. Will please define "stock"?
As in a standard 4.2.2 OS, or an original build for this tablet Verizon built? I bought the tablet on, Amazon and have no carrier.
Also, with tablet stuck In boot.... when I plug it in via usb, my PC reognises that it is my tablet, yet shows no evidence other than the device manager. Does the application you mention have ability to access my device in it's current state?
Click to expand...
Click to collapse
Yes the tool works if your PC can recognise your device. But the stock (pretty much the standard os you had when it was bought) is pretty much difficult to get
---------- Post added at 06:13 PM ---------- Previous post was at 05:56 PM ----------
Can you tell me the extension type (eg .zip .jpeg) of the backup you made .its in your SD card right .so try to tell me the extension type by getting SD card in PC via memory card reader or putting it in another phone
---------- Post added at 06:23 PM ---------- Previous post was at 06:13 PM ----------
I hope its an .md5 file ,its late night here I'll get back to you in the morning .due to non availability of stock firmware(good if you can find it) your backup(if its .md5) is functional way of getting your phone back . you also need mtkdroid tools for this .
The file extension is .backup. I am looking for a decompiler. Then I convert to .md5. We shall see.
ManYical said:
The file extension is .ask. I am looking for a decompiler. Then I convert to .md5. We shall see.
Click to expand...
Click to collapse
Okay . if you get the .md5 file ,there's an option to to prepare blocks for sp flash tool in mtkdroid tools. Then choose the .md5 file and wait for mtkdroid tools to finish.
Now in sp flash tool chooses scatter loading and choose the scatter text prepared by droid tools
Uncheck cache,userdata and most importantly preloader.
Click download in sp tool and now plug your completely powered of phone to PC via USB .wait for success notification.
Ok. I broke down and bought another QMV7A off of Amazon. Screen is in "MEH" condition, big deal. Bottom line.... I have a Samsung Galaxy Light that I am willing to brick. I need help with getting whatever is needed from the incoming QMV7A, so that I may breathe life into boot-trapped other Ellipsis.
I would like to use Samsung as guineapig in my hopefully learning something. I was successful in in getting the tablet back to the recovery menu I am use to using RomTool (must thank that developer....must thank that developer), and was also able to restore 'USER' settings. My backup was NOT OF OS. Huh....
With my settings I did get my dancing Android boot back instead of Verizon's. Now it is stuck there. NIIIIIICE !!
After reading and reading, I still can't figure out how to get a scatter text, or for that matter, what the help is it? I digress....
I need to learn on the Samsung what to do to my QMV7A.
Please assist in the attempted surgery on my Galaxy so that I may bring back my missing toy...errrr...tool...yeah...
In advance, thanks for all the assistance so far by Qwerty. And a hopeful blessing to any other that may teach me what NOT to do.
ManYical
Okay i have a really big problem with my phone ( Huawei y7 prime 2017 TRT-L21a )
How the Problem Started :
the phone was working very fine while rooted and unlocked , didnt face any problem at all and once it happened that i decided to install Xposed framework and modules , i did install the latest and the most suitable for phone version yet no modules appeared so i had to go into twrp to install modules and stuff , i noticed that the phone couldnt boot and went into bootloop problem , had to format factory but ACCIDENTLY erased ALL data including SYSTEM , P.s im not a noob with root stuff , The Major problem showed up i Couldnt even get Past The sign of * ur phone is unlocked , OS is booting * , so i went on surfing the internet for answer and solutions but it was all invain for complete 30 hours without sleeping and having a heart attack !.... every time i proceed i find problems Like FRP LOCKED and USB DEBUGGING LOCKED and ADB DEVICE NOT SHOWN . UNABLE TO ENTER RECOVERY MOD , etc......
i ve Tried every thing and followed every video instructions , also xda developers instructions , And many websites .
i downloaded all compatible dload (update.app) zips and everything but i couldnt install them as they reach 5% and get stuck and the phone then reboots in loops
So now , 1) i dont have OS
2) no USB DEBUG
3) no FRP unlocked
4) no TWRP or Recovery ( the erecovery stucks at 61% and then reboot loops )
5) i have only got fastboot state and written on it phone unlocked.
So The Fix i need and i really have a big hope that it will fix it which is :
1) a way to unlock USB DEBUGGING for my bricked phone using Pc which i didnt find all over the internet
2) a way to install TWRP recovery using Pc (but not the ordinary method ) i need it to be installed through dload
3) ALL MY OS FILES STOCK ( RECOVERY - BOOT - SYSTEM and others )
Whoever find me a solution , i will be in his debt for a life time as im really Got nothing to do for it , im literally useless rn
MANY THANKS IN ADVANCE.