ROOTING your Ubislate 7ci
DO IT AT YOUR OWN RISK. You could brick your tablet and of course your guarantee will be void
I found this awesome guide in http://forum.xda-developers.com/member.php?u=517426, updated by baudi, I followed the steps to install the adb driver in my laptop and my Ubislate showed up in adb prompt
If windows cannot install driver automatically, choose the option to select it from a directory and point it to the Android SDK.
I did not use the unlockroot.com option though, I used the attached file, with instructions from http://forum.xda-developers.com/showthread.php?t=1929822
It worked for me and I have a rooted Ubislate 7ci. DO IT AT YOUR OWN RISK. You could brick your tablet and of course your guarantee will be void
ClockWorkMod recovery working
I have used the attached file to install ClockWorkMod recovery. As always, DO IT AT YOUR OWN RISK. You could brick your tablet.
This is not custom written for Ubisate 7ci. This is CWM recovery provided for A13 tablets, which works in Ubislate, since the kernel is similar / same. PLEASE NOTE, since Ubisate 7ci does not have a hardware back button, we cannot use it effectively.
VOL INCREASE - UP
VOL DECREASE - DOWN
POWER - SELECT
After performing the required action, for example backup, press VOL DECREASE and POWER at the same time to shutdown the tablet.
Can you tell me the kernel version and other hardware of your device , i have 7c+ and looking for working CWM recovery so if same will work for me that would be great. Otherwise if you have any recovery detail about 7C+ then please share... I dont even know how to boot into recovery
srinivask82 said:
I have used the attached file to install ClockWorkMod recovery. As always, DO IT AT YOUR OWN RISK. You could brick your tablet.
This is not custom written for Ubisate 7ci. This is CWM recovery provided for A13 tablets, which works in Ubislate, since the kernel is similar / same. PLEASE NOTE, since Ubisate 7ci does not have a hardware back button, we cannot use it effectively.
VOL INCREASE - UP
VOL DECREASE - DOWN
POWER - SELECT
After performing the required action, for example backup, press VOL DECREASE and POWER at the same time to shutdown the tablet.
Click to expand...
Click to collapse
will it work on 7c+ ?
srinivask82 said:
I have used the attached file to install ClockWorkMod recovery. As always, DO IT AT YOUR OWN RISK. You could brick your tablet.
This is not custom written for Ubisate 7ci. This is CWM recovery provided for A13 tablets, which works in Ubislate, since the kernel is similar / same. PLEASE NOTE, since Ubisate 7ci does not have a hardware back button, we cannot use it effectively.
VOL INCREASE - UP
VOL DECREASE - DOWN
POWER - SELECT
After performing the required action, for example backup, press VOL DECREASE and POWER at the same time to shutdown the tablet.
Click to expand...
Click to collapse
will this work on ubislate 7c+ ?"
utsav17 said:
will this work on ubislate 7c+ ?"
Click to expand...
Click to collapse
Anybody? Will this work for Ubislate 7C+?
nitin.chobhe said:
Anybody? Will this work for Ubislate 7C+?
Click to expand...
Click to collapse
There are lot of threads to root 7C+ (Gingerbread). I am not sure this will work, this is tested only in ICS.
Re: Successfully Rooted Ubislate 7ci
Can you please post links? I searched a lot but couldn't find even a single one.
Thanks in advance...
Sent from my Nexus 4 using xda app-developers app
nitin.chobhe said:
Can you please post links? I searched a lot but couldn't find even a single one.
Thanks in advance...
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I got Ubislate 7+ and 7C+ confused. Sorry about that
Ubislate 7C+ shares the same specs as 7Ci other than the GPRS module, so this root should work, in theory. As always, use it at your discretion
nitin.chobhe said:
Can you please post links? I searched a lot but couldn't find even a single one.
Thanks in advance...
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
srinivask82 said:
I got Ubislate 7+ and 7C+ confused. Sorry about that
Ubislate 7C+ shares the same specs as 7Ci other than the GPRS module, so this root should work, in theory. As always, use it at your discretion
Click to expand...
Click to collapse
Guys If you dont mind can you please install SuperSu or Root Checker App from Play Store And check your Tab is already rooted... because i got 2 7C+ and both are rooted and overclocked...
Please check and confirm...
shubhdeep99 said:
Guys If you dont mind can you please install SuperSu or Root Checker App from Play Store And check your Tab is already rooted... because i got 2 7C+ and both are rooted and overclocked...
Please check and confirm...
Click to expand...
Click to collapse
That is a great tip. I heard few other generic Chinese devices coming as unlocked. Thanks for the info.
From your signature it seems that you are a pro, can you please start working on Jellybean for Ubislate 7C*?
srinivask82 said:
That is a great tip. I heard few other generic Chinese devices coming as unlocked. Thanks for the info.
From your signature it seems that you are a pro, can you please start working on Jellybean for Ubislate 7C*?
Click to expand...
Click to collapse
We can start bro but we dont have any backup for recover from bootloop and also over Boot loader is locked so we can not use CWM recovery... But we still can do maythings if Datawind provide us Firmware(Rom) of Ubislate 7C+ and also flashing tool of same firmware for backup for our device. As i heard somewhere that our device is based on allwinner (a chines mobile maker co.) and its chipset never bricked so we can do lots of thing if they support us...
So just push datawind to give us firmware of our tab ... just contact them by phone, mail and ask for this...
Edit:- Have you checked your tab is rooted or not?
shubhdeep99 said:
We can start bro but we dont have any backup for recover from bootloop and also over Boot loader is locked so we can not use CWM recovery... But we still can do maythings if Datawind provide us Firmware(Rom) of Ubislate 7C+ and also flashing tool of same firmware for backup for our device. As i heard somewhere that our device is based on allwinner (a chines mobile maker co.) and its chipset never bricked so we can do lots of thing if they support us...
So just push datawind to give us firmware of our tab ... just contact them by phone, mail and ask for this...
Edit:- Have you checked your tab is rooted or not?
Click to expand...
Click to collapse
I rooted my tab using the process which I have written above, so no way to know whether it was rooted before. Also, I have installed CWM recovery in my 7Ci, It worked with one major flaw, Cannot go back in menu (since the CWM designed was not for this tab and 7Ci does not have a physical back button). I used this CWM to take a backup and Since it cannot comeout, I kept on pressing Vol down and power key till my tab shutdown.
ClockWorkMod recovery working
FY - I should have stopped here, but went too far and installed CWM touch and screwed my TAB, now it is in bootloop. I have even tried draining the battery, still no luck.
srinivask82 said:
I rooted my tab using the process which I have written above, so no way to know whether it was rooted before. Also, I have installed CWM recovery in my 7Ci, It worked with one major flaw, Cannot go back in menu (since the CWM designed was not for this tab and 7Ci does not have a physical back button). I used this CWM to take a backup and Since it cannot comeout, I kept on pressing Vol down and power key till my tab shutdown.
ClockWorkMod recovery working
FY - I should have stopped here, but went too far and installed CWM touch and screwed my TAB, now it is in bootloop. I have even tried draining the battery, still no luck.
Click to expand...
Click to collapse
Thanks for sharing.. sucks that you're stuck in a boot loop though. :-/
I have CWM working on my Ubislate 7C+ as of now.
Cyber-Logic said:
Thanks for sharing.. sucks that you're stuck in a boot loop though. :-/
I have CWM working on my Ubislate 7C+ as of now.
Click to expand...
Click to collapse
What?
Really Can you give me the link of that CWM Recovery?
shubhdeep99 said:
What?
Really Can you give me the link of that CWM Recovery?
Click to expand...
Click to collapse
Lol, it's the same one which was posted here!
See my post here, I tried all this about an hour ago:
http://forum.xda-developers.com/showthread.php?t=2161965&page=4
I used the link posted by Utsav17.
shubhdeep99 said:
We can start bro but we dont have any backup for recover from bootloop and also over Boot loader is locked so we can not use CWM recovery... But we still can do maythings if Datawind provide us Firmware(Rom) of Ubislate 7C+ and also flashing tool of same firmware for backup for our device. As i heard somewhere that our device is based on allwinner (a chines mobile maker co.) and its chipset never bricked so we can do lots of thing if they support us...
So just push datawind to give us firmware of our tab ... just contact them by phone, mail and ask for this...
Edit:- Have you checked your tab is rooted or not?
Click to expand...
Click to collapse
Hi shubhdeep99,
What all things one needs to start working on JB for Ubislate 7C+? Now as CWM recovery is working with this tab can you please start working on it? Let us know if you need any help regarding this.
Thanks!
Nitin
---------- Post added at 09:50 PM ---------- Previous post was at 09:49 PM ----------
shubhdeep99 said:
Guys If you dont mind can you please install SuperSu or Root Checker App from Play Store And check your Tab is already rooted... because i got 2 7C+ and both are rooted and overclocked...
Please check and confirm...
Click to expand...
Click to collapse
Installed SuperSu and it says that the tablet is rooted. You were right this tab is pre-rooted...
Multiple users reported success
I soft bricked my Ubislate 7Ci by installing incompatible recovery, got it fixed thru datawind tech support (They fixed and sent it in few days :victory
I rooted again using this procedure and it worked again. I have tested twice :good:
srinivask82 said:
I have used the attached file to install ClockWorkMod recovery. As always, DO IT AT YOUR OWN RISK. You could brick your tablet.
This is not custom written for Ubisate 7ci. This is CWM recovery provided for A13 tablets, which works in Ubislate, since the kernel is similar / same. PLEASE NOTE, since Ubisate 7ci does not have a hardware back button, we cannot use it effectively.
VOL INCREASE - UP
VOL DECREASE - DOWN
POWER - SELECT
After performing the required action, for example backup, press VOL DECREASE and POWER at the same time to shutdown the tablet.
Click to expand...
Click to collapse
I have installed this recovery it works but there is no key combination to go recovery mode when tab is off.
We can go when tab is on.
Second thing we can't use backup if tab is not booted, we can use backup via cwm recovery only.
Right?
CWM Recovery
ahirwar said:
I have installed this recovery it works but there is no key combination to go recovery mode when tab is off.
We can go when tab is on.
Second thing we can't use backup if tab is not booted, we can use backup via cwm recovery only.
Right?
Click to expand...
Click to collapse
You can press the VOL UP button (keep on pressing) and press the power button. Keep on pressing both buttons till you enter recovery. If the CWM installation is not proper you will get the default recovery which is not working well in Ubislate.
The only thing which is not possible in CWM in 7Ci is going back thru the menu. I always long press the power button to shut the tablet down after I finish my work in CWM and turn the table ON in the usual way. It always works for me.
PS: Taking a backup should be the first thing you do, It had saved me quite a few times.
Related
hello guy's
i made a custom rom for galaxy pro
deodxed and rooted & init.d support for GB 2.3.6
and we will use galaxy mini cwm 5.0.2.6 (it's work 100%)
and also custom boot.img
How to use cwm?
use odin to flash cwm recovery and boot.img
as one package and don't forget to use BENNETT_v1.0_2.ops
we can't use cwm by volume or home button
Q=UP : T=DOWN : Z=ENTER : POWER=BACK
AND YOU CAN MAKE BACKUP AND RESTORE
to flash the custom rom you have to mount system and cache and data
after flash the rom you have to make wipe data /reset and wipe cache and wipe dalvik cache
Download boot.img
http://www.mediafire.com/file/3uho1syl5z1j1ls/boot.tar.md5
Download custom rom
http://www.mediafire.com/file/z5y85ffo4kf0ce4/GT-B7510.zip
Download recovery
http://www.mediafire.com/file/7s4ompc1m6jpsuc/recovery.tar.md5
i hope galaxy mini devs to help us
sure i'm not Responsible for any damage
this is great!! but im having trouble when flashing recovery
luy991 said:
this is great!! but im having trouble when flashing recovery
Click to expand...
Click to collapse
use odin to flash recovery and use file attachment unrar it
flash as one package
Hi,
Could you please post more info about the rom, like known issues, whats working and whats not, a2sd scripts to use.
Thanks.
any hopes for multitouch????
is this cyanogen mod??
Detailed installation instructions & screenshots plz
Would be great if you could provide detailed installation instructions & ROM info and screenshots please...
Has anyone ever try that rom? No information ,no pictures. Nothing ... Just explanation and download link
success
Hello everyone!
I tried to install cwm-recovery (for Galaxy Mini) and author's firmware and that was successful.
I had:
1. Odin v4.38.
2. Stock firmware (Android 2.3.6) rooted by "universal_gb_root_v19.zip".
3. Installed application "Quick Boot (Reboot)" (You can find in Google Play Store).
I did (my way):
1. Power off phone.
2. Long press "Q"+"Power button" (you will see picture with text "Downloading...").
3. Press button "OPS" and select BENNET file.
4. Press button "BOOT" and select "boot.tar.md5" (you will see error, but it's normal).
5. Press button "One Package" and select "recovery.tar.md5".
6. Select checkbox "One Package".
7. Press button "Start" and wait.
8. Phone will be reboot.
9. Launch on the phone application "Quick Boot" and press "Recovery".
10. Phone will be loaded in "CWM Recovery".
11. You can flash author's firmware "GT-B7510.zip" (WARNING: don't work Wi-Fi after flashing!!!)
gnomba said:
Hello everyone!
I tried to install cwm-recovery (for Galaxy Mini) and author's firmware and that was successful.
I had:
1. Odin v4.38.
2. Stock firmware (Android 2.3.6) rooted by "universal_gb_root_v19.zip".
3. Installed application "Quick Boot (Reboot)" (You can find in Google Play Store).
I did (my way):
1. Power off phone.
2. Long press "Q"+"Power button" (you will see picture with text "Downloading...").
3. Press button "OPS" and select BENNET file.
4. Press button "BOOT" and select "boot.tar.md5" (you will see error, but it's normal).
5. Press button "One Package" and select "recovery.tar.md5".
6. Select checkbox "One Package".
7. Press button "Start" and wait.
8. Phone will be reboot.
9. Launch on the phone application "Quick Boot" and press "Recovery".
10. Phone will be loaded in "CWM Recovery".
11. You can flash author's firmware "GT-B7510.zip" (WARNING: don't work Wi-Fi after flashing!!!)
Click to expand...
Click to collapse
So that means that no more Wifi fr the Galaxy PRO, so is that no worth, is it?
So flashing that ROM, is just a waste coz no more Wifi mmmm I don't know what to do... D:
kevin_uzumaki said:
So that means that no more Wifi fr the Galaxy PRO, so is that no worth, is it?
So flashing that ROM, is just a waste coz no more Wifi mmmm I don't know what to do... D:
Click to expand...
Click to collapse
I just tried author's method. I was interested in installing CWM and possibility installing from CWM.
So...
gnomba said:
I just tried author's method. I was interested in installing CWM and possibility installing from CWM.
Click to expand...
Click to collapse
So you jsut have the CWM and not a Custom ROM you have the offical and is root, I need some help i don't find anything fr this Smartphone, I had already Flask Xperia's and the SGS that I had but this one... I have no idea D:
HELP PLEASE D:
has anyone done this succesfully without any issues?
custom rom flash
gnomba said:
I just tried author's method. I was interested in installing CWM and possibility installing from CWM.
Click to expand...
Click to collapse
cwm is working fine but after following the steps before and after flashing i am not able to acquire root privelages for any root app(titanium backup) please help me with this:crying:
---------- Post added at 01:23 PM ---------- Previous post was at 01:11 PM ----------
malcolm_cg said:
has anyone done this succesfully without any issues?
Click to expand...
Click to collapse
tried but cannot acquire root privelages for titanium backup and other root apps
is the wifi issue fixed yet?
or have you stopped development?
you could always ask for some devs help
gtb-7510
i installed micromax a80 clockmod recovery in my gtb 7510 (galaxy pro)........its installed perfectly but when i re-started my.....phone......then it didn't came in any mode i.e not in download...or even in recovery mode........!
it is in dead condition.......plz tell me what 2 do ...??
because.....i almost tried every thing......but its not getting on....!
rsdanger said:
i installed micromax a80 clockmod recovery in my gtb 7510 (galaxy pro)........its installed perfectly but when i re-started my.....phone......then it didn't came in any mode i.e not in download...or even in recovery mode........!
it is in dead condition.......plz tell me what 2 do ...??
because.....i almost tried every thing......but its not getting on....!
Click to expand...
Click to collapse
1st que.
From where you got the idea to install clockwork mode of MICROMAX mobile into out galaxy pro??
There is 1st rule of flashing that roms,firmwares,recoveries made for some different phone should not be flashed into some different phone you are using.
So remember that from now on.
Now,
Your current problem.
You are sayin that is does not even start right?
If you connect it to charger, does it show battery logo on screen?
Like the logo we see when phone is switched off & we put it in charging?
sent from my samsung galaxy pro GT-B7510 using xda premium
Hi..similar error here can flash the original rom
i kinda screwed up my Galaxy pro too..i flashed a false rom now..i cant even get my battery charging,download mode etc screens..
but when i hold volume dowm + power+ Q keys for 10 seconds..the phone detects on a computer..all i get is samsung CDMA technologies,modem and serial diag port...also samung usb composite port...
Odin detects the com mpping ..when i start to flash..the process gets stuck on setup connection....
adb doesnt detect it...
power +e and power + r also detected on pc..but no display on pc....
how will i restore my phone...its partially detected on pc!!!
essuraj said:
i kinda screwed up my Galaxy pro too..i flashed a false rom now..i cant even get my battery charging,download mode etc screens..
but when i hold volume dowm + power+ Q keys for 10 seconds..the phone detects on a computer..all i get is samsung CDMA technologies,modem and serial diag port...also samung usb composite port...
Odin detects the com mpping ..when i start to flash..the process gets stuck on setup connection....
adb doesnt detect it...
power +e and power + r also detected on pc..but no display on pc....
how will i restore my phone...its partially detected on pc!!!
Click to expand...
Click to collapse
Well, m inclined to think that ur device is bricked...
If odin cant flash the stock firmware, then i think there is very less you can do.
Is your warranty still available?
I mean is your galaxy pro still under 1 year of purchase?
If so, then you can immediatly rush to samsung customer service centre for best solution.
If you want to try something by yourself,
Then there is 1 method.
I read about it long long ago.
So not sure of it.
It was called something like "usg jig" or "jtag"..not sure though..u can google it if you want to search more on it..
Bt my advice would be to go to customer care if it is in 1 yr of purchase..
sent from my samsung galaxy pro GT-B7510 using xda premium
omg.....nothing else is possible?
well im out of warrenty..and the customer care people say they have to replace the whole motherboard whch costs to 3500Rs..
so i gave up...i tried to explain them it was a software issue but they dont understand....
and i thought the jtag was to get into download mode...where can i get that in india??
essuraj said:
well im out of warrenty..and the customer care people say they have to replace the whole motherboard whch costs to 3500Rs..
so i gave up...i tried to explain them it was a software issue but they dont understand....
and i thought the jtag was to get into download mode...where can i get that in india??
Click to expand...
Click to collapse
Ohh, u r from india?
Nice, me too..
Well, 2 of my frends had their phone bricked..but both were in warranty..so they got device replacement/mother-board replacement for free..
N i knw its very hard to find jtag in india..
N also, i agree that though flashing is software issue, customer care ppl nly do mother-board replacement nly..
N somehow that works..
BTW, what exact error you get when you try to flash with odin?
N what are you trying to flash with odin now? Stock firmware right?
Which one?
sent from my samsung galaxy pro GT-B7510 using xda premium
Hello guys first all of all just forthe info Allwinner A10 tablet cant be hard bricked! You can always flash a livesuit.img and restore your tab back! We dont have the original liveusit.img of the tab but i manage to get back on stock with few steps and this method is confirmed and tested!!
Requirements -
ADB Drivers ( http://www.4shared.com/rar/NY7NE6wm/ADB_Drivers.html )
USB Mouse
Little Brain
Note : If you have CWM installed onyur tab you can simply Restore from your restored backup if you dont have one here it is
http://www.4shared.com/rar/t3ycEEpk/2012-09-25114926.html
Step 1 : - Download the software called Livesuit you can easily google it and find it but here's treat for you!
http://www.yarvik.com/userfiles/yarvikfirmware/YarvikLiveSuit.zip
Step 2 : - Download this image http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img
Step 3 : - Extract Livesuit software and open Livesuit.exe -- > Whataver pop-ups come just click no! -- > Click on select image and browse to the downloaded TAB461 .img and leave the software as it is
Step 4 : - Now connect your tablet ( make sure it is turned off not in recovery or something , you can do this by holding power button for long ) to the pc/laptop by holding back button! as soon as you attach usb , while holding back button press 'power' button 10 times repeatedly!
Wait and a pop up will come Click 'YES' 2 times it will take 2 mins to flash the image and u will soon boot up!
Step 5 :- Touch wont work on this image! So connect your wired mouse with OTG cable and install CWM and then the backup! as described below
http://www.facebook.com/l.php?u=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1906247&h=xAQG1BrKz
If having any problem comment below! i will solve it!
If u like my work....just hit THANKS
In spite of installing the adb drivers my device does not show please help
if i want to use this process to root my funbook P275, without back button, will it work?
Wifi not working..
after un brick my micromax P500..
wifi not working..
i thing wifi driver is missing.. plsssss help.....
---------- Post added at 02:18 PM ---------- Previous post was at 01:39 PM ----------
pls help bro....
plsss help....
hi bro.. i bricked my funbook pro.. and now i recover it but my wifi driver is missing.. now wifi is not working..
do u give me a idea where i got micromax P500 wifi driver..
Plss help.....
please help...!!!!
I too unbricked my funbook p500 ....
but after that my wifi is not working ..... i trid many rom but am not able to use wifi
pls help......
IMG of working P500 (without wifi problems)
cool.gautam said:
Hello guys first all of all just forthe info Allwinner A10 tablet cant be hard bricked! You can always flash a livesuit.img and restore your tab back! We dont have the original liveusit.img of the tab but i manage to get back on stock with few steps and this method is confirmed and tested!!
Requirements -
ADB Drivers ( http://www.4shared.com/rar/NY7NE6wm/ADB_Drivers.html )
USB Mouse
Little Brain
Note : If you have CWM installed onyur tab you can simply Restore from your restored backup if you dont have one here it is
http://www.4shared.com/rar/t3ycEEpk/2012-09-25114926.html
Step 1 : - Download the software called Livesuit you can easily google it and find it but here's treat for you!
http://www.yarvik.com/userfiles/yarvikfirmware/YarvikLiveSuit.zip
Step 2 : - Download this image http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img
Step 3 : - Extract Livesuit software and open Livesuit.exe -- > Whataver pop-ups come just click no! -- > Click on select image and browse to the downloaded TAB461 .img and leave the software as it is
Step 4 : - Now connect your tablet ( make sure it is turned off not in recovery or something , you can do this by holding power button for long ) to the pc/laptop by holding back button! as soon as you attach usb , while holding back button press 'power' button 10 times repeatedly!
Wait and a pop up will come Click 'YES' 2 times it will take 2 mins to flash the image and u will soon boot up!
Step 5 :- Touch wont work on this image! So connect your wired mouse with OTG cable and install CWM and then the backup! as described below
http://www.facebook.com/l.php?u=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1906247&h=xAQG1BrKz
If having any problem comment below! i will solve it!
If u like my work....just hit THANKS
Click to expand...
Click to collapse
Excuse me for asking big thing, but can you make a IMG file from your (or anyone) working funbookPro.
The livesuit wiped something related to wifi while using Yarvik image file. Since then the wifi isn't working. I managed to turn it on using some other Stock firmwares but its not able to get the IP address. ( tried http://www.curtisint.com/html/CustService/Manuals/PRO_PLT1044_FIRMWARE.ZIP, http://smartpad.mediacomeurope.it/Prodotti/Download.aspx?XRC=M-MP1010I and many other stock firmwares). Unless the source stock firmware is flashed seems the wifi is not going to work. Even the backup provided by you is unable to bring back the wifi. funbookpro is using some wifi chip which isn't present in most of the tablets. I've been struggling to get it back from few days. downloaded many Gigs still no luk
Thanks in advance.
---------- Post added at 02:04 PM ---------- Previous post was at 01:56 PM ----------
oh btw anyone who bricked their funbookpro can use the following firmwares with livesuit till we get an official firmware
Most of the firmwares wipe out the internal SD card. use only if u dont care about internal SD or if it is being shown as damaged.
The following are the images that worked for me..
http://www.kocaso.com/firmware/M1062_01.exe
http://www.curtisint.com/html/CustService/Manuals/PRO_PLT1044_FIRMWARE.ZIP
http://smartpad.mediacomeurope.it/Prodotti/Download.aspx?XRC=M-MP1010I
http://www.mediacomeurope.it/ZeusInc/PressRoom/Documents/1010i.zip
http://smartpad.mediacomeurope.it/Prodotti/Download.aspx?XRC=M-MP1010I
Some have problem while restoring the backup given by Gautam.
FunBook Pro similar firmware with other 3g dongles working (try this only on bricked)
M1062_01.exe This firmware is working great. I've tried couple of 3G dongles they are working fine. Screw photon + :laugh:
The downside is unable to use other updates like PowerTab_JB_V2_by_Joby. It just freezes at cyanogenmod logo. Oh yeah!!! it wipes out the Internal SD card as well. Still the firmware isn't a perfect match.
Touch screen not working
After unbricking, touch is not working, any ideas? Thanks
naneraja said:
After unbricking, touch is not working, any ideas? Thanks
Click to expand...
Click to collapse
Follow the step5 from the main post by cool.gautam
matrixbluestar said:
Follow the step5 from the main post by cool.gautam
Click to expand...
Click to collapse
Works now after reinstalling the backup. Thanks for the help
micromax p500
i have installed cwm recovery but nothing works in it no button works except power button and mouse is also not working and touch is also not working
please help.................
Hello Everyone Sorry for Delay i was out of City so... thats why.. i was not able to share or update it..
So now wait is over i got Ubislate 7c+ Full Stock ROM from Datawind office and Livesuit to flash. So now you can try to build custom rom and can try other rom's and can test it..
Here is the UBISlate Datawind Stock ROm
Click Here to Download UBISLATE 7C+ Stock Rom
Click here to download LiveSuit Flasher
Step by Step Guide
1. Put Your Ubislate off means complete power off
2. Run Livesuite
3. Select/Open UBI Slate stock Img File
4. Plug oneside of Data cable to computer only to computer not with Tablet (rember)
5. Now keep pressing and holding Volume up+ button and now attach data cable with tablet ( UBISLATE)
6. Now Popup of live suite will say Yes and again Yes press yes both times and ... release the volume up+ button
7. Now update will start.... wait for 5 min
8. 100% up gradation complete
:good:Now enjoy your UBISLATE ONCE AGAIN ENJOY
Enjoy Just
Uploaded or not?
What Happend Brother ,,uploading complete or not?
What a good news you got!
Now if you're telling us all truth, and this is original firmware, then this device is now un-brickable. In case of bootloop, we can go to flash mode with some pin and key combination and flash back to stock. And in case bootloader failed to load (hard brick), this device automatically goes to flash mode (kinda fail safe) and we can get back our working device. This is all because of Allwinner A13 board. It's not a work of Datawind.
Another thing is that, I can start development, because I know there way to recover back.
I hope you really got the firmware and you'll upload it soon.
Thank you.
Hello Friends for those with stuck on android n forgotten password
TRY >> http://j.gs/205J
it helped me
n please comment if it helps u to
ENJOY
ubislate 7c + rom
simars said:
Hello Every...
So now wait is over i got Ubislate 7c+ Full Stock ROM from Datawind office and Livesuit to flash. So now you can try to build custom rom and can try other rom's and can test it..
Here is the UBISlate Datawind Stock ROm
Uploading Please wait it will take 1 Hour around 240Mb
Enjoy Just
Click to expand...
Click to collapse
Where is your upload man???
Have you uploaded or not?
I got same problem, device is not booting only datawind logo
on the screen. I told about it to datawind, they said that they
Will send me link for rom zip, I asked "device is not booting then
How to possible to insert zip file into device "
they told " card should be formatted where zip pasted, then you
Can use that file "
But they didn't send me any mail in 24 hours.
Info for developer .....thanks
ahirwar said:
Where is your upload man???
Have you uploaded or not?
I got same problem, device is not booting only datawind logo
on the screen. I told about it to datawind, they said that they
Will send me link for rom zip, I asked "device is not booting then
How to possible to insert zip file into device "
they told " card should be formatted where zip pasted, then you
Can use that file "
But they didn't send me any mail in 24 hours.
Info for developer .....thanks
Click to expand...
Click to collapse
yea there are 2 way for flashing
one is flashing using livesuite (this is flashed with fone off-in download mode)
second is by recovery software
just do as instructed in my link or wait for the datawind to send u the file n flash it using livesuite
*NOTE* u should know that tab can connect to pc when the tab is stuck on loading image *
fkardame said:
yea there are 2 way for flashing
one is flashing using livesuite (this is flashed with fone off-in download mode)
second is by recovery software
just do as instructed in my link or wait for the datawind to send u the file n flash it using livesuite
*NOTE* u should know that tab can connect to pc when the tab is stuck on loading image *
Click to expand...
Click to collapse
Have you got any rom for ubislate 7c + ???
If you have .... where is it?
ahirwar said:
Have you got any rom for ubislate 7c + ???
If you have .... where is it?
Click to expand...
Click to collapse
as i said go to this link >>> http://j.gs/205J
n read it n do as it says
fkardame said:
as i said go to this link >>> http://j.gs/205J
n read it n do as it says
Click to expand...
Click to collapse
I want to say something to you, first your link
Is not working, second if you really know
About android then you should give real
link. Third this forum not for your advertising
This is for development so no need to put
advertise link, only put direct link ok Mr.
See here: http://forum.xda-developers.com/showpost.php?p=39546159&postcount=116
That person reported to got stock firmware along with proper instruction to make a bootable SDCard.
Direct Link for the firmware: https://www.dropbox.com/sh/aywf02dd0y2qp2k/Ao2v2JZxvC
Edit: That's original Stock firmware for Ubislate7C+, see explanation here: http://forum.xda-developers.com/showpost.php?p=39623084&postcount=130
ahirwar said:
I want to say something to you, first your link
Is not working, second if you really know
About android then you should give real
link. Third this forum not for your advertising
This is for development so no need to put
advertise link, only put direct link ok Mr.
Click to expand...
Click to collapse
try this >>> http://fkardame.blogspot.in/p/ubislate-7c.html
or find on ur own
enjoy n learn to request not order
callingmedic911 said:
See here: http://forum.xda-developers.com/showpost.php?p=39546159&postcount=116
That person reported to got stock firmware along with proper instruction to make a bootable SDCard.
Direct Link for the firmware: https://www.dropbox.com/sh/aywf02dd0y2qp2k/Ao2v2JZxvC
Edit: That's original Stock firmware for Ubislate7C+, see explanation here: http://forum.xda-developers.com/showpost.php?p=39623084&postcount=130
Click to expand...
Click to collapse
thanks brother for helping me.
I would like to ask one question
Is that original firmware? Because its name is
Wifi8188 something.
.
ahirwar said:
thanks brother for helping me.
I would like to ask one question
Is that original firmware? Because its name is
Wifi8188 something.
.
Click to expand...
Click to collapse
Yes, that is original firmware for Ubislate7C+, please read my explanation (I have explained and proved that is stock firmware). Also, after flashing that file, you will have no longer Datawind's pre-installed (All sh*ty apps, so nothing to worry about).
That name looks weird because, it was automatically generated by compiler according to boards/configuration/driver etc, and looks like Datawind didn't had time to rename that file.
BTW Flash it, you'll have no problems.
callingmedic911 said:
Yes, that is original firmware for Ubislate7C+, please read my explanation (I have explained and proved that is stock firmware). Also, after flashing that file, you will have no longer Datawind's pre-installed (All sh*ty apps, so nothing to worry about).
That name looks weird because, it was automatically generated by compiler according to boards/configuration/driver etc, and looks like Datawind didn't had time to rename that file.
BTW Flash it, you'll have no problems.
Click to expand...
Click to collapse
Phoenixcard not working it stuck after burn MBR.
any suggestion????
ahirwar said:
Phoenixcard not working it stuck after burn MBR.
any suggestion????
Click to expand...
Click to collapse
u can use livesuite n flash that img file u got from the dropbox directly
1. install livesuite drivers
2. open livesuite n select that file u got .
3. press n hold vol down button n insert the usb cable n keep pressing power button till u get warning on ur comp screen
4. press yes n yes
5. it will start flashing
Simple Done
n for ur information that 8188 means it has wifi of rtl8188 n if in case u have rtl 8150 then ur wifi wont work
so try to make a backup of ur device using cwm recovery
Updating Please Wait for 10 Mins
simars said:
Hello Every...
So now wait is over i got Ubislate 7c+ Full Stock ROM from Datawind office and Livesuit to flash. So now you can try to build custom rom and can try other rom's and can test it..
Here is the UBISlate Datawind Stock ROm
Uploading Please wait it will take 1 Hour around 240Mb
Enjoy Just
Click to expand...
Click to collapse
Updating Dear Please wait for 10 mins more
fkardame said:
u can use livesuite n flash that img file u got from the dropbox directly
1. install livesuite drivers
2. open livesuite n select that file u got .
3. press n hold vol down button n insert the usb cable n keep pressing power button till u get warning on ur comp screen
4. press yes n yes
5. it will start flashing
Simple Done
n for ur information that 8188 means it has wifi of rtl8188 n if in case u have rtl 8150 then ur wifi wont work
so try to make a backup of ur device using cwm recovery
Click to expand...
Click to collapse
Boss please give me livesuit and cwm recovery link.
And instruction for install cwm recovery .
I installed successfully stock rom via phoenixcard.
Thanks in advance
ahirwar said:
Phoenixcard not working it stuck after burn MBR.
any suggestion????
Click to expand...
Click to collapse
What is the size of your SDCard? And how're you connecting your SDCard to your PC?
---------- Post added at 09:06 PM ---------- Previous post was at 08:56 PM ----------
fkardame said:
if in case u have rtl 8150 then ur wifi wont work
Click to expand...
Click to collapse
How can same device model have different WiFi boards?
callingmedic911 said:
What is the size of your SDCard? And how're you connecting your SDCard to your PC?
---------- Post added at 09:06 PM ---------- Previous post was at 08:56 PM ----------
How can same device model have different WiFi boards?
Click to expand...
Click to collapse
it does have coz its made with few different manufacturers coz the quantity ordered is very high
so it depends on the manufacturer .. what drivers n hardware they use
but the base is all the same like it has allwinner a13 processor
n allwinner13 support 3 different touchpanel drivers too
n 2 wlan driver n 3-4 sensor drivers n 2 diff camera driver
so all the best with using the file
i had one ubislate without sim i almost downloaded 44 flash files n got the right one finally
coz in some touch was not working in some camera in some sensor
but finally got the right file... thats what my experience says
take care n be safe before flashing as u can take the backup of ur device before flashing the given file
---------- Post added at 01:16 PM ---------- Previous post was at 01:10 PM ----------
ahirwar said:
Boss please give me livesuit and cwm recovery link.
And instruction for install cwm recovery .
I installed successfully stock rom via phoenixcard.
Thanks in advance
Click to expand...
Click to collapse
livesuite link >>> http://j.gs/2184 (Skip ad)
cwm recovery link >>> http://j.gs/205Z(skip ad)
n method to
Method:
1: Connect the tab to pc n install driver
2: Start the tab n activate usb debugg in tur tab
3: Flash Cwm recovery by clicking recovery for ics and follow the instruction
4: Click reboot to recovery.
ubislate 7c+
adb is not working in ubislate 7c+ ,
Already installed sdk adb in my pc. But adb not recognized
Ubislate 7c+ . Datawind don't care about customer problem.
it stucks on datawind logo
i have a chinese tablet 9.7" with android 4.0.4. i have installed titanium backup it shows status that device is rooted but the prob is that i cant found cwm for my tablet i have tried rom manager also but no luck.
bcause tablet restart after every five to 10 min and very slow also.
here is all details plz give me link to good rom and cwm and all other which i needed.
Name.
Apex IPS pro
MOdel No.
S5
Android Version
4.0.4
Baseband version.
1.4rc3.
kernel version
3.0.8+
[email protected] #2
i have found cwm and install it through teminal emulator and install cyanogen mod 10 after enter in cwm i have wipe/factory reset and install CM10 rom and reboot but after that my chinense tablet wont show any thind just showing balck screen i tried to enter in cwm but nothing will appear i press tha power button lcd suddenly off and again black screen will appear what should i do plz help
Build No.
03F2-P1-H1-H01-AH40-20120708T
plz help
i have found cwm and install it through teminal emulator and install cyanogen mod 10 after enter in cwm i have wipe/factory reset and install CM10 rom and reboot but after that my chinense tablet wont show any thind just showing balck screen i tried to enter in cwm but nothing will appear i press tha power button lcd suddenly off and again black screen will appear what should i do plz help
thanks in advance
Do you want to wipe data?
Try it on setting in the mobile only.
Do you want to wipe dalvik-cache, then do it through rom manager.
Wiping is easy, why do u want to do it through cwm only????
Ur tab doesn't have all hardware support i feel...
It's bricked... If you want to enjoy custom ROMs and kernels, at least get a device that is supported.
display
sanjaykumar.sanjay69 said:
Do you want to wipe data?
Try it on setting in the mobile only.
Do you want to wipe dalvik-cache, then do it through rom manager.
Wiping is easy, why do u want to do it through cwm only????
Ur tab doesn't have all hardware support i feel...
Click to expand...
Click to collapse
it doesnt show display only black screen will appear after i power on or i plug in charger only bright black screen... how to wipe i cant see any thing.
plz help
Lim Wee Huat said:
It's bricked... If you want to enjoy custom ROMs and kernels, at least get a device that is supported.
Click to expand...
Click to collapse
yes you are right sir... i have sony ericsson arc s also it had a problem like this and it stuck on boot loop i found sony updator and update my phone so i want to ask that any tool that update android or to restore my orignal firmware... i have backup my rom with cwm and that is present in sdcard but how can i restore that because tablet doesnt display.
help plz
i have try live suit but it always show yellow exclamation mark when i connect the tablet and i also not find the correct firmware for my tablet .....
its not bricked sir coz i have read in many forums that allwinner a10 chipset is practically unbrickable
what should i do any onew plz help me
looks like your tablet is having Allwinner A10 BOXCHIP CPU.
Do you have the original stock .img ROM( not the cwm backup) ?
if yes then press the power button for about 10-15 secs to switch it off then connect it to PC and try to flash it with livesuit tool.
have you look on needrom.com if have the rom for you ?
nooooooooooooooo
shadab007g said:
looks like your tablet is having Allwinner A10 BOXCHIP CPU.
Do you have the original stock .img ROM( not the cwm backup) ?
if yes then press the power button for about 10-15 secs to switch it off then connect it to PC and try to flash it with livesuit tool.
Click to expand...
Click to collapse
no i dont have stock firmware thats the problem i have find on many sites but no luck manufacturer have a site but there are too many models of named S5 what to do
Souled62 said:
have you look on needrom.com if have the rom for you ?
Click to expand...
Click to collapse
there is no rom for my tab actually i dont know what shoud i type to search the correct rom for my tab i have searced cortex A8 rom and boxchip firmware etc etc, with cortex A8 rom that i have livesuit show always yellow exclamation mark
ubaidbhatti said:
no i dont have stock firmware thats the problem i have find on many sites but no luck manufacturer have a site but there are too many models of named S5 what to do
Click to expand...
Click to collapse
ok.... can you provide me the full info of your tablet?
pm me.... lets talk there.
Try a factory reset or you could simply try a root program and try un rooting it then rooting it back cause my phone was slow after root but I tried again and it worked like a charm (back up before formating)
DoNt FeEd ThE tRoLls !
(PrOhOpEr) <------ I own !
Please thank me it only takes a click or two!
i have flashed wrong rom and my tab dosent show any display then how can i factory reset when i cant see any thing
I am having the same issue, I am trying to revive a Chinese "vigo" 7 in tablet for kicks.
I get the boot screen and when I plug it into my win 7 PC I can see a drive like icon but I cant access it .
Livesuite just complains about nothing needs updating when I try that.
7" 5-Point Capacitive Touch Screen
Boxchip A10 1.2Ghz Cortex A8
Android 4.0 w 4GB Memory and 512MB RAM
Micro SD (Upto 32GB)
HDMI, Headphone Socket, Mini USB
Wireless N w Front Camera
Supports most Video and Audio formats
Li-ion battery 3000mAH
I can get it to the boot and splash screen but thats it, I can see windows is trying to load it but the drivers dont seem to be there but there is no complaint from windows either and nothing in the Device manager.
I have Livesuit here and installed but it cant see the tablet. Windows shows 2 new "drives" when I plug the tablet into my PC but I cant access them.
Any thoughts?
TIA
Hi guys, I bought the above phone off Amazon. I found out this very strange device also had a root-enabled kernel out of the box, but my question is about recovery. I want to install CWM as a first choice, if not that, TWRP, but a Google search only tuns up loose references to MTK6589 which is presumably the SoC, but nothing for my specific model. Currently when I reboot to recovery with any root app it shows 'no command' (maybe there is no recovery installed to the recovery partition?) and when entering bootloader mode the device displays what is seen in the attached photo.
I would appreciate any help on getting a working recovery set up on this device.
Thanks!
Attempting
Shinypaper said:
Hi guys, I bought the above phone off Amazon. I found out this very strange device also had a root-enabled kernel out of the box, but my question is about recovery. I want to install CWM as a first choice, if not that, TWRP, but a Google search only tuns up loose references to MTK6589 which is presumably the SoC, but nothing for my specific model. Currently when I reboot to recovery with any root app it shows 'no command' (maybe there is no recovery installed to the recovery partition?) and when entering bootloader mode the device displays what is seen in the attached photo.
I would appreciate any help on getting a working recovery set up on this device.
Thanks!
Click to expand...
Click to collapse
Hi, I also have one of these phones and have been looking at recovery options with little success.
However I have found a set of instructions in the XDA University about porting CWM. (unfortunalty I can't post a link due to being a Noob, but if you Google 'porting cwm' it should be the top result).
I am going to be attempting to do this once I have got my PC set up dual boot for Linux.
Will post back with news on how it's going. Would appreciate any progress you have made about a recovery option.
Regards
Mad.
first, make a backup of your device using mtk droid tools.
if phone isn`t rooted yet, use this tutorial:http://forum.xda-developers.com/showthread.php?t=2332783
for the recovery, you need to unpack your recovery.img, take the kernel zImage and put it in the cwm-recovery. for mt6589 phones, this one should work: http://forum.xda-developers.com/showthread.php?t=2357875
you can unpack/repack your boot.img with this tools:
http://forum.xda-developers.com/showthread.php?t=1587411
after obtaining new recovery.img, flash it through SP flash tool or mobileuncle tools.
Recovery Quirk
Chrizzly, thanks for the pointers, will be checking out the tools tonight.
Found a quirk though, may just be my phone.
I booted into recovery last night and as expected the "no commands" came up, but then I took the back off the phone and a recovery menu appeared. Had options in there like reboot, delete cache, delete delvik cache....
I'm assuming this is the stock recovery.
I tested it again this morning and booting into recovery and then taking the back off the phone made the menu appear!!
Any one else care to test and see if it's a stock thing or just a quirk of my phone.
replied before, my post disappeared.. this isn`t related to your device , this is recovery-typical. it is showing the android first, without a menu. you need to press hardware buttons, to get into the menu( this is device-specific, you need to try that, also buttons on the touch screen, if there are some) this will usually bring you in recovery MENU. think you accidently pressed one of these buttons while opening the device.
CWM Recovery
Sincerely thank you! But not working on i9389 haipai.White screen and then auto-power
ntn8888 said:
Sincerely thank you! But not working on i9389 haipai.White screen and then auto-power
Click to expand...
Click to collapse
Here you are, this is an archive containing my stock haipai i9389 recovery image and another one already patched with CWM
h t t p s : // mega . co . nz / #!4sAlhCaD!L83eOgs3DD0lVAFFlKy470i--zF1BBp4FdSfpIxpoOg
I hope this can be helpfull for you all ...
haipai i9389 CWM
lovelord said:
Here you are, this is an archive containing my stock haipai i9389 recovery image and another one already patched with CWM
h t t p s : // mega . co . nz / #!4sAlhCaD!L83eOgs3DD0lVAFFlKy470i--zF1BBp4FdSfpIxpoOg
I hope this can be helpfull for you all ...
Click to expand...
Click to collapse
Can not open the link that you provided. There are other ways to help?
https://mega.co.nz/#!4sAlhCaD!L83eOgs3DD0lVAFFlKy470i--zF1BBp4FdSfpIxpoOg
Chrizzly:
Re: Stock recovery. Thought it was a button press that got me in first time but I tried it several times and no button worked just pulling the back off. Little puzzled about that but it's something I can live with!!
lovelord:
Re: Files. Thanks for the files, going to try them out as soon as I can!!
Done
I have got CWM working on my i9389 now, there was a few quirks in getting it going.
The method I used was as posted in the MTK Droid Root & Tools thread by rua1.
TIPS
Leave the battery out when doing read back or flash in Flash Tools.
Not mentioned in the instruction is the MTK vcom drivers which you will need and can be found in the Root tutorial posted by Chrizzly a bit further up.
Make sure you read the instructions by rua1 closely and use the images posted as it's not always straight forward.
Last tip pay attention to where MTK tools puts the files it creates, had me stumped for a bit!! I've never been very good at following instructions!!
Hill-Climber said:
I have got CWM working on my i9389 now, there was a few quirks in getting it going.
The method I used was as posted in the MTK Droid Root & Tools thread by rua1.
TIPS
Leave the battery out when doing read back or flash in Flash Tools.
Not mentioned in the instruction is the MTK vcom drivers which you will need and can be found in the Root tutorial posted by Chrizzly a bit further up.
Make sure you read the instructions by rua1 closely and use the images posted as it's not always straight forward.
Last tip pay attention to where MTK tools puts the files it creates, had me stumped for a bit!! I've never been very good at following instructions!!
Click to expand...
Click to collapse
PLease help me i boot looped my haipai i9389 i then got stock rom from needromDOTcom and it gave me white screen boot up. How can i fix this
ian619420 said:
PLease help me i boot looped my haipai i9389 i then got stock rom from needromDOTcom and it gave me white screen boot up. How can i fix this
Click to expand...
Click to collapse
I managed to boot loop mine while messing with a ROM I made (it's not finished yet) but managed to recover by re-flashing using the Flash Tools a back up I had taken just after installing CWM.
Do you have a back up you can flash?
I have just checked mine and even zipped it's still 800MB so I can't email it to you...
...sure if I looked about I could find somewhere to upload it to for you. PM me if you need this!!
The sd holder broke off, can i buy this http://www.amazon.com/gp/offer-list...w?ie=UTF8&condition=new&qid=1379198350&sr=8-1 the galaxy s3 i9300 sd card slot holder and put it on my haipai i9389? or do i need specific haipai i9389 sd card slot holder.