Hey, can someone tell me if i can find a rom for huawei ascend y210d (y210 - 0200)? and a link if is posible.
I have now a viettel rom and is not working very fine, is crushig, i need a new rom pls somebody... a link or .... something
cilig said:
Hey, can someone tell me if i can find a rom for huawei ascend y210d (y210 - 0200)? and a link if is posible.
I have now a viettel rom and is not working very fine, is crushig, i need a new rom pls somebody... a link or .... something
Click to expand...
Click to collapse
http://www.android-hilfe.de/root-cu...nmod-10-1-u8666e-entwicklung-eingestellt.html
a ROM for Huawei ascend y210-0200
to all developers out there someone plz help me on my huawei ascend y2010-0200 phone coz it crashes all of my system app and user app .. i cannot open my phone and stock on logo .. plz help how to recover and repair my phone .. huhuhu T_T
Can you enter recovery mode?
Via [email protected]
same device
IceTe said:
Can you enter recovery mode?
Via [email protected]
Click to expand...
Click to collapse
Hi. Have the same device. But it's almost dead. No recowery((. ( Was updating via update.app on sd card but missed the sing that it's for my modification of model.
So now it's just flashes lights and connects too PC as some two ports. One is in download mode I think, QPST telling so.. athor I think for some backups.. But I don't know what to do about this ports.. even can't find native firmware.
Simple question is. can I somhow install recowery thru update.app file? Phone is still processing this file, becouse it creates update.log, but with error (maybe if original fw then it just helps, but I still can not find it) or where I can download or even buy native firmware updater?
Maybe is some software that can help thru PC? QPST is powerfull but I miss much knolage(((((((((
Appreciate help
cilig said:
Hey, can someone tell me if i can find a rom for huawei ascend y210d (y210 - 0200)? and a link if is posible.
I have now a viettel rom and is not working very fine, is crushig, i need a new rom pls somebody... a link or .... something
Click to expand...
Click to collapse
https://www.dropbox.com/s/xcmmed4kmn90lry/Y210D stock firmware B869.7z?dl=0
here you are bro my CWM backup of version B869 for Y210D..Also here bro is my other things dumped stock recovery img for this phone flash it with fastboot https://www.dropbox.com/s/a2pltlxuse3sfpo/recovery210d.img?dl=0 also here are my bro adb and fastboot drivers for huawei if this ones dont work just install with kingoroot https://www.dropbox.com/s/37mn5bnkkg4fuh6/Huawei-ADB-FastBootdrivers.zip?dl=0
And use minimal adb and fastboot to do flashing with fastboot..To go into fastboot mode use this first disable fastboot in settings then turn off phone.remove bat,after 5 sec reinsert bat and then turn on phone and when huawei shows release power button and press and hold volume down for 10sec-whatever you think best then connect to pc phone with usb cable and to go to recovery do "adb reboot recovery" from adb or just do same as for fastboot but with pressing volume up instead of volume down button or power up with holding both power and volume up i really dont know but somehow figured out.But before all you know for sure that when youre restoring cwm backup you need to put into "sdcard/clockworkmod/backup" folder from that zip file when you unpack it you will find this folder with date in name and just put it there..And then before doing restore make sure you did wipe data,wipe catche,dalvik catche and format only sistem partition..Here is also https://www.dropbox.com/s/jygfnjygepl2jzd/cwm-oneclick-install.zip?dl=0 cwm recovery for this device
engineeravp said:
Hi. Have the same device. But it's almost dead. No recowery((. ( Was updating via update.app on sd card but missed the sing that it's for my modification of model.
So now it's just flashes lights and connects too PC as some two ports. One is in download mode I think, QPST telling so.. athor I think for some backups.. But I don't know what to do about this ports.. even can't find native firmware.
Simple question is. can I somhow install recowery thru update.app file? Phone is still processing this file, becouse it creates update.log, but with error (maybe if original fw then it just helps, but I still can not find it) or where I can download or even buy native firmware updater?
Maybe is some software that can help thru PC? QPST is powerfull but I miss much knolage(((((((((
Appreciate help
Click to expand...
Click to collapse
i got the same problem. is there any solution by now? please help..
Related
Hello Everyone Sorry for Delay i was out of City so... thats why.. i was not able to share or update it..
So now wait is over i got Ubislate 7c+ Full Stock ROM from Datawind office and Livesuit to flash. So now you can try to build custom rom and can try other rom's and can test it..
Here is the UBISlate Datawind Stock ROm
Click Here to Download UBISLATE 7C+ Stock Rom
Click here to download LiveSuit Flasher
Step by Step Guide
1. Put Your Ubislate off means complete power off
2. Run Livesuite
3. Select/Open UBI Slate stock Img File
4. Plug oneside of Data cable to computer only to computer not with Tablet (rember)
5. Now keep pressing and holding Volume up+ button and now attach data cable with tablet ( UBISLATE)
6. Now Popup of live suite will say Yes and again Yes press yes both times and ... release the volume up+ button
7. Now update will start.... wait for 5 min
8. 100% up gradation complete
:good:Now enjoy your UBISLATE ONCE AGAIN ENJOY
Enjoy Just
Uploaded or not?
What Happend Brother ,,uploading complete or not?
What a good news you got!
Now if you're telling us all truth, and this is original firmware, then this device is now un-brickable. In case of bootloop, we can go to flash mode with some pin and key combination and flash back to stock. And in case bootloader failed to load (hard brick), this device automatically goes to flash mode (kinda fail safe) and we can get back our working device. This is all because of Allwinner A13 board. It's not a work of Datawind.
Another thing is that, I can start development, because I know there way to recover back.
I hope you really got the firmware and you'll upload it soon.
Thank you.
Hello Friends for those with stuck on android n forgotten password
TRY >> http://j.gs/205J
it helped me
n please comment if it helps u to
ENJOY
ubislate 7c + rom
simars said:
Hello Every...
So now wait is over i got Ubislate 7c+ Full Stock ROM from Datawind office and Livesuit to flash. So now you can try to build custom rom and can try other rom's and can test it..
Here is the UBISlate Datawind Stock ROm
Uploading Please wait it will take 1 Hour around 240Mb
Enjoy Just
Click to expand...
Click to collapse
Where is your upload man???
Have you uploaded or not?
I got same problem, device is not booting only datawind logo
on the screen. I told about it to datawind, they said that they
Will send me link for rom zip, I asked "device is not booting then
How to possible to insert zip file into device "
they told " card should be formatted where zip pasted, then you
Can use that file "
But they didn't send me any mail in 24 hours.
Info for developer .....thanks
ahirwar said:
Where is your upload man???
Have you uploaded or not?
I got same problem, device is not booting only datawind logo
on the screen. I told about it to datawind, they said that they
Will send me link for rom zip, I asked "device is not booting then
How to possible to insert zip file into device "
they told " card should be formatted where zip pasted, then you
Can use that file "
But they didn't send me any mail in 24 hours.
Info for developer .....thanks
Click to expand...
Click to collapse
yea there are 2 way for flashing
one is flashing using livesuite (this is flashed with fone off-in download mode)
second is by recovery software
just do as instructed in my link or wait for the datawind to send u the file n flash it using livesuite
*NOTE* u should know that tab can connect to pc when the tab is stuck on loading image *
fkardame said:
yea there are 2 way for flashing
one is flashing using livesuite (this is flashed with fone off-in download mode)
second is by recovery software
just do as instructed in my link or wait for the datawind to send u the file n flash it using livesuite
*NOTE* u should know that tab can connect to pc when the tab is stuck on loading image *
Click to expand...
Click to collapse
Have you got any rom for ubislate 7c + ???
If you have .... where is it?
ahirwar said:
Have you got any rom for ubislate 7c + ???
If you have .... where is it?
Click to expand...
Click to collapse
as i said go to this link >>> http://j.gs/205J
n read it n do as it says
fkardame said:
as i said go to this link >>> http://j.gs/205J
n read it n do as it says
Click to expand...
Click to collapse
I want to say something to you, first your link
Is not working, second if you really know
About android then you should give real
link. Third this forum not for your advertising
This is for development so no need to put
advertise link, only put direct link ok Mr.
See here: http://forum.xda-developers.com/showpost.php?p=39546159&postcount=116
That person reported to got stock firmware along with proper instruction to make a bootable SDCard.
Direct Link for the firmware: https://www.dropbox.com/sh/aywf02dd0y2qp2k/Ao2v2JZxvC
Edit: That's original Stock firmware for Ubislate7C+, see explanation here: http://forum.xda-developers.com/showpost.php?p=39623084&postcount=130
ahirwar said:
I want to say something to you, first your link
Is not working, second if you really know
About android then you should give real
link. Third this forum not for your advertising
This is for development so no need to put
advertise link, only put direct link ok Mr.
Click to expand...
Click to collapse
try this >>> http://fkardame.blogspot.in/p/ubislate-7c.html
or find on ur own
enjoy n learn to request not order
callingmedic911 said:
See here: http://forum.xda-developers.com/showpost.php?p=39546159&postcount=116
That person reported to got stock firmware along with proper instruction to make a bootable SDCard.
Direct Link for the firmware: https://www.dropbox.com/sh/aywf02dd0y2qp2k/Ao2v2JZxvC
Edit: That's original Stock firmware for Ubislate7C+, see explanation here: http://forum.xda-developers.com/showpost.php?p=39623084&postcount=130
Click to expand...
Click to collapse
thanks brother for helping me.
I would like to ask one question
Is that original firmware? Because its name is
Wifi8188 something.
.
ahirwar said:
thanks brother for helping me.
I would like to ask one question
Is that original firmware? Because its name is
Wifi8188 something.
.
Click to expand...
Click to collapse
Yes, that is original firmware for Ubislate7C+, please read my explanation (I have explained and proved that is stock firmware). Also, after flashing that file, you will have no longer Datawind's pre-installed (All sh*ty apps, so nothing to worry about).
That name looks weird because, it was automatically generated by compiler according to boards/configuration/driver etc, and looks like Datawind didn't had time to rename that file.
BTW Flash it, you'll have no problems.
callingmedic911 said:
Yes, that is original firmware for Ubislate7C+, please read my explanation (I have explained and proved that is stock firmware). Also, after flashing that file, you will have no longer Datawind's pre-installed (All sh*ty apps, so nothing to worry about).
That name looks weird because, it was automatically generated by compiler according to boards/configuration/driver etc, and looks like Datawind didn't had time to rename that file.
BTW Flash it, you'll have no problems.
Click to expand...
Click to collapse
Phoenixcard not working it stuck after burn MBR.
any suggestion????
ahirwar said:
Phoenixcard not working it stuck after burn MBR.
any suggestion????
Click to expand...
Click to collapse
u can use livesuite n flash that img file u got from the dropbox directly
1. install livesuite drivers
2. open livesuite n select that file u got .
3. press n hold vol down button n insert the usb cable n keep pressing power button till u get warning on ur comp screen
4. press yes n yes
5. it will start flashing
Simple Done
n for ur information that 8188 means it has wifi of rtl8188 n if in case u have rtl 8150 then ur wifi wont work
so try to make a backup of ur device using cwm recovery
Updating Please Wait for 10 Mins
simars said:
Hello Every...
So now wait is over i got Ubislate 7c+ Full Stock ROM from Datawind office and Livesuit to flash. So now you can try to build custom rom and can try other rom's and can test it..
Here is the UBISlate Datawind Stock ROm
Uploading Please wait it will take 1 Hour around 240Mb
Enjoy Just
Click to expand...
Click to collapse
Updating Dear Please wait for 10 mins more
fkardame said:
u can use livesuite n flash that img file u got from the dropbox directly
1. install livesuite drivers
2. open livesuite n select that file u got .
3. press n hold vol down button n insert the usb cable n keep pressing power button till u get warning on ur comp screen
4. press yes n yes
5. it will start flashing
Simple Done
n for ur information that 8188 means it has wifi of rtl8188 n if in case u have rtl 8150 then ur wifi wont work
so try to make a backup of ur device using cwm recovery
Click to expand...
Click to collapse
Boss please give me livesuit and cwm recovery link.
And instruction for install cwm recovery .
I installed successfully stock rom via phoenixcard.
Thanks in advance
ahirwar said:
Phoenixcard not working it stuck after burn MBR.
any suggestion????
Click to expand...
Click to collapse
What is the size of your SDCard? And how're you connecting your SDCard to your PC?
---------- Post added at 09:06 PM ---------- Previous post was at 08:56 PM ----------
fkardame said:
if in case u have rtl 8150 then ur wifi wont work
Click to expand...
Click to collapse
How can same device model have different WiFi boards?
callingmedic911 said:
What is the size of your SDCard? And how're you connecting your SDCard to your PC?
---------- Post added at 09:06 PM ---------- Previous post was at 08:56 PM ----------
How can same device model have different WiFi boards?
Click to expand...
Click to collapse
it does have coz its made with few different manufacturers coz the quantity ordered is very high
so it depends on the manufacturer .. what drivers n hardware they use
but the base is all the same like it has allwinner a13 processor
n allwinner13 support 3 different touchpanel drivers too
n 2 wlan driver n 3-4 sensor drivers n 2 diff camera driver
so all the best with using the file
i had one ubislate without sim i almost downloaded 44 flash files n got the right one finally
coz in some touch was not working in some camera in some sensor
but finally got the right file... thats what my experience says
take care n be safe before flashing as u can take the backup of ur device before flashing the given file
---------- Post added at 01:16 PM ---------- Previous post was at 01:10 PM ----------
ahirwar said:
Boss please give me livesuit and cwm recovery link.
And instruction for install cwm recovery .
I installed successfully stock rom via phoenixcard.
Thanks in advance
Click to expand...
Click to collapse
livesuite link >>> http://j.gs/2184 (Skip ad)
cwm recovery link >>> http://j.gs/205Z(skip ad)
n method to
Method:
1: Connect the tab to pc n install driver
2: Start the tab n activate usb debugg in tur tab
3: Flash Cwm recovery by clicking recovery for ics and follow the instruction
4: Click reboot to recovery.
ubislate 7c+
adb is not working in ubislate 7c+ ,
Already installed sdk adb in my pc. But adb not recognized
Ubislate 7c+ . Datawind don't care about customer problem.
it stucks on datawind logo
Firstly.....
Download the firmware from this link ... It is official firmware...
hihonor.in/support/downloads
Sorry for the inconvienience in link...
Im still a newbie..
Its around 902mb....
Then charge it... An hour of charging would be fyn....
Now take out the sd card and connect it to your pc...
Extract the downladed firmare..
Copy only "dload" folder into your sd card..
.Dont place it inside any folder just in the sd card...
Reinsert the sd card into your phone...
Now
Boot the phone by pressing vol up + vol down + power key...
It will boot into Huawei Recovery....
Now sit back and relax it will install the firmware...
Tested by me on honor 4x indian version ....
Firmware is android 4.4.4 ..
Build number is L04 V100R001C900B130..
Note:
1) Make sure u have copied dload folder to sd card......
2) Make sure u have enough juice in the phone....
PS : Just got out of a bootloop
Any questions :what: ..Just ask...
Its working fine
i try your method,
its working fine, i update my phone.
i have problem to instal Xposed in huawei honor 4x.
if i instal my android is creasing "rebooting many times".:crying::crying::crying:
pls help me to solved
Note: i try "WSM Tools" i got same problem my android is creasing "rebooting many times".
As of now.. Dont try xposed.... There's nt much support.. We just have to wait... Even I want to root and install xposed.. Bt nt much support I think it would be wise to wait.. Happy to help...
my honor 4x fastboot&rescue mode is lpcked...wat to do ???
Maverick M4a1 said:
Firstly.....
Download the firmware from this link ... It is official firmware...
hihonor.in/support/downloads
Sorry for the inconvienience in link...
Im still a newbie..
Its around 902mb....
Then charge it... An hour of charging would be fyn....
Now take out the sd card and connect it to your pc...
Extract the downladed firmare..
Copy only "dload" folder into your sd card..
.Dont place it inside any folder just in the sd card...
Reinsert the sd card into your phone...
Now
Boot the phone by pressing vol up + vol down + power key...
It will boot into Huawei Recovery....
Now sit back and relax it will install the firmware...
Tested by me on honor 4x indian version ....
Firmware is android 4.4.4 ..
Build number is L04 V100R001C900B130..
Note:
1) Make sure u have copied dload folder to sd card......
2) Make sure u have enough juice in the phone....
PS : Just got out of a bootloop
Any questions :what: ..Just ask...
Click to expand...
Click to collapse
i tries to unlock my phone bt it is locked...and i dont wrk with my phone...pls help me
rajakali8800 said:
i tries to unlock my phone bt it is locked...and i dont wrk with my phone...pls help me
Click to expand...
Click to collapse
i am unable to boot into my recovery
so what can i do
4x ubrick method
I seriously have no idea, if your method will work or not cuz my 4x been dead since few months, got stucked at welcome logo. Tried all firmwares upto 6.0.x ,, tried through "update via sd card" method in recovery, but none worked. Will reply back if my 4x gets back to life.
---------- Post added at 08:08 AM ---------- Previous post was at 08:01 AM ----------
Thank yoi so much, tried your method and it definitely worked. But the link for downloading is broken.please fix it for future purposes. But hey thanks anyway
vol up + vol down + power key...
when i do it my phone turn on and stuck on HONOR LOGO nothing happening after that.
its not turning on in recovery mod...
and fastboot & resque mode is locked what should i do now?
I have same problem.Please anyone can help me how to unlock the device from fastboot
I have same problem.Please anyone can help me how to unlock the device from fastboot & rescue mode.
gaurajsinh said:
vol up + vol down + power key...
when i do it my phone turn on and stuck on HONOR LOGO nothing happening after that.
its not turning on in recovery mod...
and fastboot & resque mode is locked what should i do now?
Click to expand...
Click to collapse
I have tried to install a wrong custom ROM in my Huawei Honor Holly U19 smartphone. And after that it is not booting in any ways. I have tried to resolve it according to costumer care representative of Huawei (that download holly update.zip file, put it in sd card in a folder named "dload" and press vol+,vol-, and power button simultaneously.) but it not work. I have corrupted my phone internal memory in this way(perhaps). I have also tried SP_Flash_tool but it shows BROM ERROR:S_FT_DA_NO_RESPONSE(4001) DA didn't send response data to Flash Tool! How to fix this problem? Please help me!
Be patient and wait for official updates ☺
52_mohamed_ismail said:
Be patient and wait for official updates ☺
Click to expand...
Click to collapse
seriously? thanks for trying to help, but you really shouldn't unless you know what your saying.
your answer is not even close to a fix for this. its very possible it is unfixable actually, depending on what exactly was flashed, most likely perma bricked.
Yeah you killed it. Not to mention I would avoid flashing devices from China based oem. Something always goes wrong g
Raghuvanshmani said:
I have tried to install a wrong custom ROM in my Huawei Honor Holly U19 smartphone. And after that it is not booting in any ways. I have tried to resolve it according to costumer care representative of Huawei (that download holly update.zip file, put it in sd card in a folder named "dload" and press vol+,vol-, and power button simultaneously.) but it not work. I have corrupted my phone internal memory in this way(perhaps). I have also tried SP_Flash_tool but it shows BROM ERROR:S_FT_DA_NO_RESPONSE(4001) DA didn't send response data to Flash Tool! How to fix this problem? Please help me!
Click to expand...
Click to collapse
try to find the right rom on google or here on xda then....flash it using sp flash tool
and click the option download and format you will lose your imei but it's easy to fixed
iam srry i can't post links here cuz i'am a new member
Raghuvanshmani said:
I have tried to install a wrong custom ROM in my Huawei Honor Holly U19 smartphone. And after that it is not booting in any ways. I have tried to resolve it according to costumer care representative of Huawei (that download holly update.zip file, put it in sd card in a folder named "dload" and press vol+,vol-, and power button simultaneously.) but it not work. I have corrupted my phone internal memory in this way(perhaps). I have also tried SP_Flash_tool but it shows BROM ERROR:S_FT_DA_NO_RESPONSE(4001) DA didn't send response data to Flash Tool! How to fix this problem? Please help me!
Click to expand...
Click to collapse
Maybe a solution here... It seems the instructions for sp flash tool differ a little from what I saw.good luck
HELP
my mate 7 in bootloop i haven't unlock botloader, i can access to recovery mode (stock) and fastboot mode only, i try to unlock boot loader on the site of HUAWEI without success it always said 'this HUAWEI ID has not been used on this device for more than 14 ays'
how can i fix this problem help me please
Thanks a lot.
hi guys no one helps me???
please help i haven't found solution
after long time searching the web and googling try chinese web sites and other english forums, sending mails in english chinese.... NOTHING RIEN NADA
i'm so disappointed my phone still not working and i'm so frustrated to see that no one gives me an answer!!!?
Here in the türkish Forum is your solution
http://turkpda.com/konu/huawei-ascend-mate-7-bootloader-kilit-kodu-alma-yeni-yoentem.1137/
http://turkpda.com/konu/huawei-ascend-mate-7-bootloader-kilidini-acma.876/
so, was your problem solved?
Skorpi58 said:
Here in the türkish Forum is your solution
http://turkpda.com/konu/huawei-ascend-mate-7-bootloader-kilit-kodu-alma-yeni-yoentem.1137/
http://turkpda.com/konu/huawei-ascend-mate-7-bootloader-kilidini-acma.876/
Click to expand...
Click to collapse
i have read the thread in english, in french (using google translate) but i didnt understand my phone doesnt boot, so how can i install kingroot.apk or honortuner.apk ???
my big problem is that i used my phone with HUAWEI-ID for only 3 three days so i can't have yhe unlock code from huawei official website :crying:
smich_ayane said:
i have read the thread in english, in french (using google translate) but i didnt understand my phone doesnt boot, so how can i install kingroot.apk or honortuner.apk ???
my big problem is that i used my phone with HUAWEI-ID for only 3 three days so i can't have yhe unlock code from huawei official website :crying:
Click to expand...
Click to collapse
if you can't open your device it's a big problem
try this
if bootloader never unlocked before.......
try download last version hisuite 4.0 and connect phone to laptop via usb .... keeping
press down values and power together until you see fastboot mode
in hisuite click SYSTEM RECOVERY let hisuite complete flash rom automatically
xda-luffy said:
if bootloader never unlocked before.......
try download last version hisuite 4.0 and connect phone to laptop via usb .... keeping
press down values and power together until you see fastboot mode
in hisuite click SYSTEM RECOVERY let hisuite complete flash rom automatically
Click to expand...
Click to collapse
where the link for hisuite 4.0?
orly1001 said:
where the link for hisuite 4.0?
Click to expand...
Click to collapse
m.huawei.com/zamobile/consumer/support/search/index.htm?proid=Jazz-TL10&proKey=Mobile%20Phones/Smartphones/Jazz-TL10
xda-luffy said:
m.huawei.com/zamobile/consumer/support/search/index.htm?proid=Jazz-TL10&proKey=Mobile%20Phones/Smartphones/Jazz-TL10
Click to expand...
Click to collapse
hisuite cannot detect my HAM 7,it is in fasboot recover mode and below is phone locked written in green color,TIA
orly1001 said:
hisuite cannot detect my HAM 7,it is in fasboot recover mode and below is phone locked written in green color,TIA
Click to expand...
Click to collapse
hisute must be detected HAM 7 ... try again and click SYSTEM RECOVERY >>>>>>>after a few seconds click RESUME button
if that not help must be find a way to unlock bootloader and flash system.img boot.img recovery.img in the same you are version damaged
xda-luffy said:
hisute must be detected HAM 7 ... try again and click SYSTEM RECOVERY >>>>>>>after a few seconds click RESUME button
if that not help must be find a way to unlock bootloader and flash system.img boot.img recovery.img in the same you are version damaged
Click to expand...
Click to collapse
how?please help even i will pay you just to to work my mobile again. my mobile show below of android logo is phone locked and rescue mode enter.
---------- Post added at 04:29 PM ---------- Previous post was at 04:26 PM ----------
xda-luffy said:
hisute must be detected HAM 7 ... try again and click SYSTEM RECOVERY >>>>>>>after a few seconds click RESUME button
if that not help must be find a way to unlock bootloader and flash system.img boot.img recovery.img in the same you are version damaged
Click to expand...
Click to collapse
after i click resume button shows recover and when i click recover it show your device is not supported for system recovery
Same problem here
There is no solution to this problem. I hope that if Huawei launches the official Marshmallow firmware, then we would be able to rectify this problems.. Otherwise I tried a lot but no results.. Best of Luck...
If u find any solution.. plz do let me know...
smich_ayane said:
HELP
my mate 7 in bootloop i haven't unlock botloader, i can access to recovery mode (stock) and fastboot mode only, i try to unlock boot loader on the site of HUAWEI without success it always said 'this HUAWEI ID has not been used on this device for more than 14 ays'
how can i fix this problem help me please
Thanks a lot.
Click to expand...
Click to collapse
For information "one-key recovery" method throw hisuite 4.0 needs unlock bootloader i have already try it without result so if some one have another idea he's welcome
This is exactly my problem, where i had flashed the update of Marshmallow, and it seems it wasn't correct. Now it is on boot loop and can't recover in fastboot. there should be a solution !! surprised even i can't shut it down, did they think about these kind of problems?
I have same problem
someone help me
how can I obtain unlock code??!!!!!!
Big_lord said:
I have same problem
someone help me
how can I obtain unlock code??!!!!!!
Click to expand...
Click to collapse
i have a simple solution. Lunch Hisuite. connect your phone to the system with cable. Hold power + vol up + vol down botton all at the sample time. Phone will vibrate, and will show huawei logo. now, let go of the three bottons. Huawei software update will lunch automatically and will start download...
oserib said:
i have a simple solution. Lunch Hisuite. connect your phone to the system with cable. Hold power + vol up + vol down botton all at the sample time. Phone will vibrate, and will show huawei logo. now, let go of the three bottons. Huawei software update will lunch automatically and will start download...
Click to expand...
Click to collapse
it's not worked
Get bootloader unlock code from dc-unlocker.com. it costs you 4 euro.
Sent from my JAZZ using XDA Free mobile app
Hi, I have a great problem: after installing the TWRP recovery 3.1.0 in my Oukitel U22, my system has disappeared and when I restart the phone starts in recovery mode. How can I reinstall a ROM (unroot) or a LineageOS, with TWRP? Thank you very much and best regards, Rino.
I use Fedora GNU/Linux OS
you must when phone is off mode and connect to usb . not in recovery mode.
spflash tool use .
U22 Oukitel Roundhouse Flying HeadACHE! FOR ROUTE 666
tmp5121 said:
you must when phone is off mode and connect to usb . not in recovery mode.
spflash tool use .
Click to expand...
Click to collapse
Hi, ive been trying for a long time with failure after failure with Magisk TWRP an now looked up a way using spflash (cant find firmware * as android 7 doesnt work with commandlines anymore for root??? i dont know enough to know why or whats what... but i would rly rly rly love AND Greatly APPRECIATE Some help with rooting this android 7 U22 oukitel ... Anyone..someone Plz PLZ PLLLLLLZZZZZ HELP ME ROOT THIS THING! ... * ... Everytime i want to do something like otg for example it seems i need root.. when i had it on my old phone i did not REALISE HOW MUCH I MISS IT *:'( .... ANYHELP RLY APPRECIATED! XDA SAVE ME FROM THIS KILLER ROUNDABOUT HEADACHE LOL!