I am using micromax a37 bolt and it has only 107MB internal so I rooted it and used Link2sd app for putting every app into sd card and I did it but after doing that I ran into some problem with all apps suddenly stopped and I will end up factory resetting every time. This time I used mounts2sd and I created the startup script and init.d. When I rebooted for mounting the sd card second partition, it booted for more than 10 minutes so I factory resetted it. But after resetting also when I tried to boot, it boots for a long time. So I thought of flashing the stock ROM and I used it with sp flash tool but I get an error S_FT_ENABLE_DRAM_FAIL (4032). Now the phone does not show up anything when I pressed the power button or any combination but when I connect it to my computer it is detected and the sp tool gives same error. During the flash I first tried with a37 stock ROM but second time I wrongly downloaded a37b stock ROM from another site but I got the same error in both cases. I tried different sp flash tool versions. Here is the google drive link to logs folder
https://drive.google.com/file/d/0B0VHdfl5tDqZaC03ZEhTVWQ0RUk/view?usp=sharing
I am making this thread so that any one who are in a similar problem can get solution from someone who gets it. Thank you
Hi,
I can't find anything relevant on XDA for your device and issue, but you can ask for help here,
http://forum.xda-developers.com/android/help
Good luck!
Related
I am sorry if this is the wrong group for this topic to discuss, I created the account for this specific problem I am having. If am wrong then please do guide me in the right direction.
So, I have a S4 mini Clone from mediatek first of all I am confused about the model. When I used the system info app it said hardware - 6572 and something else was there it said 6589_wet so what is the correct number to follow.
Now, the problem is that I rooted that device using MTKDroid and I guess I didnt chosed a right option for recovery. One day after rooting I restarted the device and it fell into bootloop then I went for recovery menu and tried to wipe partition cache and even wipe user data. It didn't work. Then, I copied the recovery backup file from my computer (which MTKDroid creates) to microSD card and tried to recover from sdcard. Even that didnt work, then I used another method which involves formatting using SPflash, even that didnt work I guess the scatter file was corrputed because SPflash sent an error message saying " the load and target are inconsistent " and the bar turned red.
Anyone with same problem got solved or anybody having any solution or even the correct rom for my device, I'd appreciate the help.
Kingtopkt072 ROM needed
Hi
Thanks for the great job done on your website.
My KingtopKt072 MT6572 is bricked, and I’ve been unsuccesfully looking for it all over Internet. Can someone please save my phone by sending me a link to download and recover my device? It’s got 512 RAM and it’s dual sim.
Thank you.
abhinavnain said:
I am sorry if this is the wrong group for this topic to discuss, I created the account for this specific problem I am having. If am wrong then please do guide me in the right direction.
So, I have a S4 mini Clone from mediatek first of all I am confused about the model. When I used the system info app it said hardware - 6572 and something else was there it said 6589_wet so what is the correct number to follow.
Now, the problem is that I rooted that device using MTKDroid and I guess I didnt chosed a right option for recovery. One day after rooting I restarted the device and it fell into bootloop then I went for recovery menu and tried to wipe partition cache and even wipe user data. It didn't work. Then, I copied the recovery backup file from my computer (which MTKDroid creates) to microSD card and tried to recover from sdcard. Even that didnt work, then I used another method which involves formatting using SPflash, even that didnt work I guess the scatter file was corrputed because SPflash sent an error message saying " the load and target are inconsistent " and the bar turned red.
Anyone with same problem got solved or anybody having any solution or even the correct rom for my device, I'd appreciate the help.
Click to expand...
Click to collapse
Hey abhinavnain, did you find an answer to your question?
Hello everyone this is my first post on this forum.Greetings to everyone!
I have Lenovo A536 android 4.4 smartphone rooted with Kingroot app
I tried to update vibeUi this morning despite the warning of rooted device:angel:.Update failed and i removed the battery when screen stopped cause device didnt turn off from power button
>Phone now enters only Boot recovery menu and reaches till lenovo logo.The phone doesnt recognise SD Card
I tryed to wipe data/factory defaults and cache so far from boot recovery menu.The other options didnt work.
>Tried so far stock roms A536_S175_150105_ROW
, A536_S147_140910_ROW with Smart Phone Flash Tool a
nd Sp Flash Tool without any luck.Also Installed SDK Tools with 4.4.2 and run through CMD line
but commands wont respond.(trying adb bridge)
Please provide me with info explain me with details what should i do, because i am total amateur using
android tools.I know it was dumb to do those things to phone so i am paying the price now (The warranty of the phone is on if i messed it badly).
Thanks in advance.
AndroidNoobUser said:
Hello everyone this is my first post on this forum.Greetings to everyone!
I have Lenovo A536 android 4.4 smartphone rooted with Kingroot app
I tried to update vibeUi this morning despite the warning of rooted device:angel:.Update failed and i removed the battery when screen stopped cause device didnt turn off from power button
>Phone now enters only Boot recovery menu and reaches till lenovo logo.The phone doesnt recognise SD Card
I tryed to wipe data/factory defaults and cache so far from boot recovery menu.The other options didnt work.
>Tried so far stock roms A536_S175_150105_ROW
, A536_S147_140910_ROW with Smart Phone Flash Tool a
nd Sp Flash Tool without any luck.Also Installed SDK Tools with 4.4.2 and run through CMD line
but commands wont respond.(trying adb bridge)
Please provide me with info explain me with details what should i do, because i am total amateur using
android tools.I know it was dumb to do those things to phone so i am paying the price now (The warranty of the phone is on if i messed it badly).
Thanks in advance.
Click to expand...
Click to collapse
Hi,
Thank you for using XDA assist
There is no dedicated forum for your device. However there is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get the expert's help
Good luck.
Hello guys,
I am in a really difficult situation here and i really need your help,
I am the owner of a Lenovo Vibe shot Z90a40. This phone had initially a chinese rom so i flashed a s240 ROW rom without any problems and it was just fine. Yesterday i found that there was an android 6 update (OTA) so i choosed YES (bad choice). The rom was downloaded, installed and when the phone rebooted it turned of by itself.
I powered it on again, stays in initial screen for 1 sec then vibrates for 2-3 secs and it shutdowns again.
So i tried to flash the previous rom again FAIL
the internal storage says write protected so flash (with Miflash generate a write protect error), i cannot access adb because the phone doesn't boot, cant use the sdfuse method (update from internal storage) because i cannot write anything to internal memmory and when i try to update through sd at about 50% says update fail.
I have tried every rom availiable no luck. I can see the internal partitions on my pc but can't access them.
Basically the problem is the write protection on internal storage.
I would really apreciate any advice,
Thanks in advance
Jimakosk said:
Hello guys,
I am in a really difficult situation here and i really need your help,
I am the owner of a Lenovo Vibe shot Z90a40. This phone had initially a chinese rom so i flashed a s240 ROW rom without any problems and it was just fine. Yesterday i found that there was an android 6 update (OTA) so i choosed YES (bad choice). The rom was downloaded, installed and when the phone rebooted it turned of by itself.
I powered it on again, stays in initial screen for 1 sec then vibrates for 2-3 secs and it shutdowns again.
So i tried to flash the previous rom again FAIL
the internal storage says write protected so flash (with Miflash generate a write protect error), i cannot access adb because the phone doesn't boot, cant use the sdfuse method (update from internal storage) because i cannot write anything to internal memmory and when i try to update through sd at about 50% says update fail.
I have tried every rom availiable no luck. I can see the internal partitions on my pc but can't access them.
Basically the problem is the write protection on internal storage.
I would really apreciate any advice,
Thanks in advance
Click to expand...
Click to collapse
Hi,
I couldn't find much information about your device here except this thread
Lenovo Z90-7 (VIBE SHOT) - International (ROW) ROM, multilanguage, GAPPS
Try posting your query there. Experts there may be able to assist you.
Good luck
Art Vanderlay
XDA Assist
I need Help My Lenovo Yoga tab 3 8 inch (850M) was soft bricked after using superSu me to replace kingsu with SuperSU.
After its finish it was working good until i restarted my device it keeps showing black powered screen with nothing even not the floating home,back bar.
Then i`ve tried to boot into recovery and wipe data and factory reset then i restart my device.
and now it stuck at lenovo logo and not showing anything else.
Then I`ve thought i should download stock rom zip and I`ve already downloaded 2 Stock roms from different sites and i put them into SD card then i have tried to flash it after wiping data but
It also stuck in verifying package data while flashing and i`ve waited about 1 hour with nothing new.
Then I have tried to flash it using ADB update, but it keeps telling cancelled
After all of these trials i thought if i replace the recovery by new recovery it`ll work
but I didn`t find how to access download mode in my tab ( the tab has no hard home button) and i `ve tried booting into download mode using ADB but also failed
Then I found a tool called SP Flash Tool but it needs a scatter loading file which i didn`t find !
I donno what else should I do I need help please
aman_a7med said:
I need Help My Lenovo Yoga tab 3 8 inch (850M) was soft bricked after using superSu me to replace kingsu with SuperSU.
After its finish it was working good until i restarted my device it keeps showing black powered screen with nothing even not the floating home,back bar.
Then i`ve tried to boot into recovery and wipe data and factory reset then i restart my device.
and now it stuck at lenovo logo and not showing anything else.
Then I`ve thought i should download stock rom zip and I`ve already downloaded 2 Stock roms from different sites and i put them into SD card then i have tried to flash it after wiping data but
It also stuck in verifying package data while flashing and i`ve waited about 1 hour with nothing new.
Then I have tried to flash it using ADB update, but it keeps telling cancelled
After all of these trials i thought if i replace the recovery by new recovery it`ll work
but I didn`t find how to access download mode in my tab ( the tab has no hard home button) and i `ve tried booting into download mode using ADB but also failed
Then I found a tool called SP Flash Tool but it needs a scatter loading file which i didn`t find !
I donno what else should I do I need help please
Click to expand...
Click to collapse
Greetings!
Thank you for using XDA Assist.
Please consider posting your question in a friendly ask any question thread found here:
http://forum.xda-developers.com/showthread.php?t=2259645
You'll find expert advice there.
Good luck!
Hello
I have an android device brand imobile model iq 6.6 when i purchased it and used it for about an hour it started misbehaving by opening apps automatically like browser, wifi,data. i tried to root this device to remove such annoying built in apps and after removing two to three apps i was using fb and device suddenly switched off i tried to turn on but it couldn't turn on it stucks on boot logo and restarts again and again.
I downloaded official rom both in sd update and through cable but i m not succeeded to install. When i try to install through sd card update it starts installation but after some times it gives som error and installation is aborted.
I also tried to install through smart phone upgrade tool but no success when i press volume up and down buttons and connect it to pc it restarts again and again so the process couldn't be started. I also tried sp flash tool but there is no scatter file inside downloaded rom so that process is also fail and thus im not able to recover my phone please help me.
Thanks developers.
Hi there and welcome to XDA.
I didn't find any info related to your problem, sorry. Try searching about that on Google.
You'll have to create an account to post in the main forums if you have any other questions.
Good luck