Hello
I have an android device brand imobile model iq 6.6 when i purchased it and used it for about an hour it started misbehaving by opening apps automatically like browser, wifi,data. i tried to root this device to remove such annoying built in apps and after removing two to three apps i was using fb and device suddenly switched off i tried to turn on but it couldn't turn on it stucks on boot logo and restarts again and again.
I downloaded official rom both in sd update and through cable but i m not succeeded to install. When i try to install through sd card update it starts installation but after some times it gives som error and installation is aborted.
I also tried to install through smart phone upgrade tool but no success when i press volume up and down buttons and connect it to pc it restarts again and again so the process couldn't be started. I also tried sp flash tool but there is no scatter file inside downloaded rom so that process is also fail and thus im not able to recover my phone please help me.
Thanks developers.
Hi there and welcome to XDA.
I didn't find any info related to your problem, sorry. Try searching about that on Google.
You'll have to create an account to post in the main forums if you have any other questions.
Good luck
Related
I have purchased a Chinese HDC Galaxy S5 G9000. It is a dual sim. From the start only face camera works. The first sim card is recognized by cannot place a call with it. When calling it does not dial and then hangs off.
I contacted the Technical service of the company which sold me the phone, and directed me to update ROM and flash tool. Unfortunately their flash tool works only with Windows (which I don't have), and everything is Chinese (which I don't know). I have tried to update the ROM using recovery. In the menu there is an option to update from sdcard. When I use that option and select the new ROM it starts "updating" but after a few seconds I get the message "updating (or operation, not very sure) aborted".
I have tried with ADB (on Ubuntu 12.04). I have succeeded in rooting the phone using fastboot. I have also managed to flash boot.img. But when trying to flash System.img, it takes hours, and at the end I get the message "Failed.... can't find device" or similar. And here I cannot see the device until I remove the phone from the computer and put it again.
I have also tried to update the ROM using ROM manager. But I get the same message: "operation aborted"
Can any one help
Thanks in advance
ishaame said:
I have purchased a Chinese HDC Galaxy S5 G9000. It is a dual sim. From the start only face camera works. The first sim card is recognized by cannot place a call with it. When calling it does not dial and then hangs off.
I contacted the Technical service of the company which sold me the phone, and directed me to update ROM and flash tool. Unfortunately their flash tool works only with Windows (which I don't have), and everything is Chinese (which I don't know). I have tried to update the ROM using recovery. In the menu there is an option to update from sdcard. When I use that option and select the new ROM it starts "updating" but after a few seconds I get the message "updating (or operation, not very sure) aborted".
I have tried with ADB (on Ubuntu 12.04). I have succeeded in rooting the phone using fastboot. I have also managed to flash boot.img. But when trying to flash System.img, it takes hours, and at the end I get the message "Failed.... can't find device" or similar. And here I cannot see the device until I remove the phone from the computer and put it again.
I have also tried to update the ROM using ROM manager. But I get the same message: "operation aborted"
Can any one help
Thanks in advance
Click to expand...
Click to collapse
Hi,
Flashing from recovery is generally not an option
SPFlash tool is available for Linux - I can't post a link but check the forums (thread 2650125) or google it up.
There are heaps of stock and custom RoM's over at needrom dot com .. and most of these have great instructions on how to flash for this phone - Just search for G9000.
Good Luck
I am using micromax a37 bolt and it has only 107MB internal so I rooted it and used Link2sd app for putting every app into sd card and I did it but after doing that I ran into some problem with all apps suddenly stopped and I will end up factory resetting every time. This time I used mounts2sd and I created the startup script and init.d. When I rebooted for mounting the sd card second partition, it booted for more than 10 minutes so I factory resetted it. But after resetting also when I tried to boot, it boots for a long time. So I thought of flashing the stock ROM and I used it with sp flash tool but I get an error S_FT_ENABLE_DRAM_FAIL (4032). Now the phone does not show up anything when I pressed the power button or any combination but when I connect it to my computer it is detected and the sp tool gives same error. During the flash I first tried with a37 stock ROM but second time I wrongly downloaded a37b stock ROM from another site but I got the same error in both cases. I tried different sp flash tool versions. Here is the google drive link to logs folder
https://drive.google.com/file/d/0B0VHdfl5tDqZaC03ZEhTVWQ0RUk/view?usp=sharing
I am making this thread so that any one who are in a similar problem can get solution from someone who gets it. Thank you
Hi,
I can't find anything relevant on XDA for your device and issue, but you can ask for help here,
http://forum.xda-developers.com/android/help
Good luck!
Hello....Few days ago my phone asked for an update without wire....i downloaded it and asked for install so i did...after restarting it stoped work...was the dead android on display...so today i downloaded the sp flash tool and i got a recovery file for my phone and the scatter file...and i tryed to install. Turned few colors on and at the finish sayed something about rom but i didnt read just pressed the ok...then didn't turned on anymore...when i connect it via usb...pop's the sound on and for 1 sec shows up in device mananger and then get off continuously...Can i do something to It? can i bring it back to life?
Hi,
I can't find a relevant thread for your device and issue, but you could ask for help here...http://forum.xda-developers.com/showthread.php?t=2259645
Good luck!
I need Help My Lenovo Yoga tab 3 8 inch (850M) was soft bricked after using superSu me to replace kingsu with SuperSU.
After its finish it was working good until i restarted my device it keeps showing black powered screen with nothing even not the floating home,back bar.
Then i`ve tried to boot into recovery and wipe data and factory reset then i restart my device.
and now it stuck at lenovo logo and not showing anything else.
Then I`ve thought i should download stock rom zip and I`ve already downloaded 2 Stock roms from different sites and i put them into SD card then i have tried to flash it after wiping data but
It also stuck in verifying package data while flashing and i`ve waited about 1 hour with nothing new.
Then I have tried to flash it using ADB update, but it keeps telling cancelled
After all of these trials i thought if i replace the recovery by new recovery it`ll work
but I didn`t find how to access download mode in my tab ( the tab has no hard home button) and i `ve tried booting into download mode using ADB but also failed
Then I found a tool called SP Flash Tool but it needs a scatter loading file which i didn`t find !
I donno what else should I do I need help please
aman_a7med said:
I need Help My Lenovo Yoga tab 3 8 inch (850M) was soft bricked after using superSu me to replace kingsu with SuperSU.
After its finish it was working good until i restarted my device it keeps showing black powered screen with nothing even not the floating home,back bar.
Then i`ve tried to boot into recovery and wipe data and factory reset then i restart my device.
and now it stuck at lenovo logo and not showing anything else.
Then I`ve thought i should download stock rom zip and I`ve already downloaded 2 Stock roms from different sites and i put them into SD card then i have tried to flash it after wiping data but
It also stuck in verifying package data while flashing and i`ve waited about 1 hour with nothing new.
Then I have tried to flash it using ADB update, but it keeps telling cancelled
After all of these trials i thought if i replace the recovery by new recovery it`ll work
but I didn`t find how to access download mode in my tab ( the tab has no hard home button) and i `ve tried booting into download mode using ADB but also failed
Then I found a tool called SP Flash Tool but it needs a scatter loading file which i didn`t find !
I donno what else should I do I need help please
Click to expand...
Click to collapse
Greetings!
Thank you for using XDA Assist.
Please consider posting your question in a friendly ask any question thread found here:
http://forum.xda-developers.com/showthread.php?t=2259645
You'll find expert advice there.
Good luck!
Hi guys, i'm desperately writing this thread after asking for help in the Oppo Community forum without no luck.
I know that this is for R7 Plus but i hope that someone could help me with my beloved R7s.
Months ago i've succefully installed the Project Spectrum ROM and it worked fine until few weeks ago when i noticed a random system slow down, maybe after an automatic app update.
I tryed to uninstall few apps and reboot the phone several times but with no luck.
So i decided to wipe it and reinstall the Color OS following the walkthrough but something went wrong and now my OPPO R7s is in a strange bootloop without recovery and fastboot.
The strange things are these:
- if I press the power button all I can see is the OPPO Logo and the loading dots in slow-mo
- if i connect it directly to a Windows PC it is recognized as a generic "Android" terminal.
- if i connect it to a Windows PC pressing and holding POWER + VOLUME DOWN + VOLUME UP it's recognized as a QHSUSB_BULK
I'm not a noob, neither an engineer, but i've a bit of familiarity with computers and similar things so i've tried to follow this guide:
http://community.oppo.com/en/forum.php?mod=viewthread&tid=48654
Downloading this service repair rom : https://drive.google.com/file/d/0BybDE_sPI3b5cmgtU05fbXNobVU/view (from this related discussion : http://forum.xda-developers.com/r7-plus/help/r7s-service-romqpst-unbrick-t3493377)
Following the guide, when i try to execute MSM8x39Downloadtool.exe selecting the phone model (i've three choices xx080_32G, xx081_32G, xx082_32G - and i don't know which one is the correct one) the phone is not recognized as COM CONNECTED in none of the ports. If I also do the verification, clicking on the top right button, it shows FAILED on system.img file.
Can that be the problem?
I'm stuck guys and i don't know what to do.
Any help will be better then a christmas present
Thanks in advance!!
A.
Download this rom and place it in the internal sd and flash to downgrade from spectrum
https://s3.amazonaws.com/public.opp...d_ColorOS/Specified_ColorOS_R7sf_full_009.zip
kishd said:
Download this rom and place it in the internal sd and flash to downgrade from spectrum
https://s3.amazonaws.com/public.opp...d_ColorOS/Specified_ColorOS_R7sf_full_009.zip
Click to expand...
Click to collapse
Thanks kishd i'll give this a try!
The only thing i'm bit worried about is how to flash from the internal sd without recovery mode and fastboot...
I'll keep you updated!:good:
any news?did you manage to fix?
hello guys
i have a problem with my oppo RS7
it has a hard bricked and stucked on booting and booting..... I only have a MacBook Pro and not windows
is anyone over there that knows exactly how to unbrick it using a Mac ?!