[Completed] unable to re install stock firmware on sprint s6 edge - XDA Assist

i have used odin several times on my sprint s6 edge (rooted and running on lolipop 5..1.1 )but this time it is failing to re install the firmware and am getting this log ....
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
does anyone knows what is going on and how can i get to re install the firmware ?

Hello,
Have you verified that USB debugging is on? Have you tried a different USB port?
Try posting your question in the forum linked below.
http://forum.xda-developers.com/galaxy-s6-edge/help
The experts there may be able to help. Good luck.

Related

CF-Auto-Root fail on Galaxy gt-i9300

Sorry to say, i tried to root Samsung GT-I9300 with help of Odin and CF-Autoroot, but got similar Messages as glenf (http://forum.xda-developers.com/showthread.php?t=2202563) and got stuck - no way to reaktivate handy (stockrom) but could manage to activate downloadmode .
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
.....
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write start!!
<ID:0/004> cache.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I used Odin 3.04 and CF-Auto-Root-m0-m0xx-gti9300.tar.md5 .
I rmoved battery to get into download mode again and tried to use Odin with a stockrom - the same effect.
I had a stockversion 4.3 MAX-I9300XXELLA-20130104192229 and thougt it would work to root - as in thread http://forum.xda-developers.com/showthread.php?t=1957273&page=63.
Anyone who can help me,Samsung is new to me, i did rooting and custom roms on HTC before, never had problems. I did not find a way out.
Regards Manfred
lavgold said:
Sorry to say, i tried to root Samsung GT-I9300 with help of Odin and CF-Autoroot, but got similar Messages as glenf (http://forum.xda-developers.com/showthread.php?t=2202563) and got stuck - no way to reaktivate handy (stockrom) but could manage to activate downloadmode .
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
.....
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write start!!
<ID:0/004> cache.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I used Odin 3.04 and CF-Auto-Root-m0-m0xx-gti9300.tar.md5 .
I rmoved battery to get into download mode again and tried to use Odin with a stockrom - the same effect.
I had a stockversion 4.3 MAX-I9300XXELLA-20130104192229 and thougt it would work to root - as in thread http://forum.xda-developers.com/showthread.php?t=1957273&page=63.
Anyone who can help me,Samsung is new to me, i did rooting and custom roms on HTC before, never had problems. I did not find a way out.
Regards Manfred
Click to expand...
Click to collapse
hi im having a similar problem with my s3 gt-19300.
its not rooted . suddenly it just went dead
and using samsung kies it failes after downloading the os.
using odin i get the following.:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMJ9_I9300VFGGMJ5_I9300BUUGMJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
any help??
Hey guys,
exactly the same Problem here... Tried diffrent USB ports, Odin versions and cables...
<OSM> CF-Auto-Root-m0-m0xx-gti9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> recovery.img
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
The reason I was rooting mainly was being unable to copy files to my phone... wtf. If you have any other solution for that on hand, I couldn't care less about rooting, so shoot
Thanks in Advance
Sorry to hear you're having problems try using Odin 3.07 instead of 3.04 worked for me.
Sent from my D5803 using XDA Free mobile app

[SOLVED] Hard-bricked my S6??

Hey guys, I just got my S6 (SM-920I) and went to root it the instant I got home. And that was where the problem all started. I used chainfire's auto-root and flashed it in odin under AP. The log in odin shows the firmware flash was successful but upon reboot my phone stays stuck on the boot logo screen. So I went to un-brick it by downloading the appropriate stock firmware for my phone (G920IDVU1AOD1_G920IOLC1AOD1_XSP.zip) (my phone is the Singapore variant of the 920I). This is the error I got on odin no matter how many tries I did.
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920IDVU1AOD1_G920IOLC1AOD1_G920IDVU1AOD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> cm.bin
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
And now I have no clue on how to fix and restore my phone back to its original state anymore. Help is greatly appreciated thanks!
EDIT: Solved... Just a simple reboot of my PC fixed the problem for me apparently...

Sprint - Issues when downgrading to 4.4.4

Has anyone tried to downgrade a note edge from Android 5.0.1 to Android 4.4.4?
It is currently on N915PVPU2BOC8. I tried flashing N915PVPU1ANK1 downloaded from sammobile. But it fails in ODIN
Below is the log file. Any help will be highly appreciated.
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N915PVPU1ANK1_N915PSPT1ANK1_N915PVPU1ANK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
You cant just odin back to kitkat. The bootloader is the issue. Once you update the bootloader to lollipop, you're stuck. Unless, chainfire would update his mobile odin to be compatible to our devices. Then we would have a shot.

Help Me with my phone

Hello
i had installed G920i INDIA 5.1.1 but today i downloaded G920i Trinidad and Tobago 5.1.1 (best firmware) and when i was installing it ODIN says FAIL and i forced device to reboot and it shows to me: error updating firmware, connect device to SmartSwitch.
- i was no downgrading my device in ODIN i dont know why it sayed to me FAIL.. WTF?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920IDVU2COF8_G920IUUB2COF9_G920IDVU2COF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> cm.bin
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img
<ID:0/008> cache.img
<ID:0/008> hidden.img
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
WHAT SHOULD I DO?

Sm-g920f....g920fxxu2qoi9

My phone build number says G920FXXU2QOI9. would build number G920FXXU2BOG8 work on it??? kinda new to rooting so any help would be appreciated.
tried odin to install original firmware and this is what I got
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU2COH2_G920FBTU2COH3_G920FXXU2COH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008> cache.img
<ID:0/008> cm.bin
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Categories

Resources