Help Me with my phone - Galaxy S6 Q&A, Help & Troubleshooting

Hello
i had installed G920i INDIA 5.1.1 but today i downloaded G920i Trinidad and Tobago 5.1.1 (best firmware) and when i was installing it ODIN says FAIL and i forced device to reboot and it shows to me: error updating firmware, connect device to SmartSwitch.
- i was no downgrading my device in ODIN i dont know why it sayed to me FAIL.. WTF?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920IDVU2COF8_G920IUUB2COF9_G920IDVU2COF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> cm.bin
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img
<ID:0/008> cache.img
<ID:0/008> hidden.img
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
WHAT SHOULD I DO?

Related

P6210 update to ICS

Chinese machine used ODIN to flash P6210XXLPL_HOME but failed.
proceed:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6210OXALPL_P6210XXLPL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> cache.img
<ID:0/008> NAND Write Start!!
<ID:0/008> factoryfs.img
<ID:0/008> hidden.img
<ID:0/008> recovery.img
<ID:0/008> Sbl.bin
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
Do i need to patch the bootloader? How?
Thank u!
What exactly do u mean by Chinese machine?
MacZzang said:
What exactly do u mean by Chinese machine?
Click to expand...
Click to collapse
my firmware now is P6210ZCLA1

Sprint - Issues when downgrading to 4.4.4

Has anyone tried to downgrade a note edge from Android 5.0.1 to Android 4.4.4?
It is currently on N915PVPU2BOC8. I tried flashing N915PVPU1ANK1 downloaded from sammobile. But it fails in ODIN
Below is the log file. Any help will be highly appreciated.
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N915PVPU1ANK1_N915PSPT1ANK1_N915PVPU1ANK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
You cant just odin back to kitkat. The bootloader is the issue. Once you update the bootloader to lollipop, you're stuck. Unless, chainfire would update his mobile odin to be compatible to our devices. Then we would have a shot.

[Completed] unable to re install stock firmware on sprint s6 edge

i have used odin several times on my sprint s6 edge (rooted and running on lolipop 5..1.1 )but this time it is failing to re install the firmware and am getting this log ....
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
does anyone knows what is going on and how can i get to re install the firmware ?
Hello,
Have you verified that USB debugging is on? Have you tried a different USB port?
Try posting your question in the forum linked below.
http://forum.xda-developers.com/galaxy-s6-edge/help
The experts there may be able to help. Good luck.

Sm-g920f....g920fxxu2qoi9

My phone build number says G920FXXU2QOI9. would build number G920FXXU2BOG8 work on it??? kinda new to rooting so any help would be appreciated.
tried odin to install original firmware and this is what I got
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU2COH2_G920FBTU2COH3_G920FXXU2COH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008> cache.img
<ID:0/008> cm.bin
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

How to upadate Nougat to the latest version???

Hello,
i have the DPLT nougat firmware and I want to update to the latest one. The only option is using Odin? Can I do it thru zip file?
I have twrp. Will I nee to put it again, and root, and clean the data partition and everything...?
Thanks
dari-woka said:
Hello,
i have the DPLT nougat firmware and I want to update to the latest one. The only option is using Odin? Can I do it thru zip file?
I have twrp. Will I nee to put it again, and root, and clean the data partition and everything...?
Thanks
Click to expand...
Click to collapse
Check for OTA update first from settings menu If that does not work, flash "HOME_CSC" from the new firmware via Odin and your data should not be affected.
mrd0pe said:
Check for OTA update first from settings menu If that does not work, flash "HOME_CSC" from the new firmware via Odin and your data should not be affected.
Click to expand...
Click to collapse
thanks for the answer, but it does not update the system when I check it on the phone
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1203)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> cache.img
<ID:0/008> hidden.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
dari-woka said:
thanks for the answer, but it does not update the system when I check it on the phone
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1203)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> cache.img
<ID:0/008> hidden.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
My bad, I guess i wrote that reply a little too fast.. It's the AP file you should flash.

Categories

Resources