Sprint - Issues when downgrading to 4.4.4 - Note Edge Q&A, Help & Troubleshooting

Has anyone tried to downgrade a note edge from Android 5.0.1 to Android 4.4.4?
It is currently on N915PVPU2BOC8. I tried flashing N915PVPU1ANK1 downloaded from sammobile. But it fails in ODIN
Below is the log file. Any help will be highly appreciated.
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N915PVPU1ANK1_N915PSPT1ANK1_N915PVPU1ANK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

You cant just odin back to kitkat. The bootloader is the issue. Once you update the bootloader to lollipop, you're stuck. Unless, chainfire would update his mobile odin to be compatible to our devices. Then we would have a shot.

Related

P6210 update to ICS

Chinese machine used ODIN to flash P6210XXLPL_HOME but failed.
proceed:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6210OXALPL_P6210XXLPL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> cache.img
<ID:0/008> NAND Write Start!!
<ID:0/008> factoryfs.img
<ID:0/008> hidden.img
<ID:0/008> recovery.img
<ID:0/008> Sbl.bin
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
Do i need to patch the bootloader? How?
Thank u!
What exactly do u mean by Chinese machine?
MacZzang said:
What exactly do u mean by Chinese machine?
Click to expand...
Click to collapse
my firmware now is P6210ZCLA1

[SOLVED] Hard-bricked my S6??

Hey guys, I just got my S6 (SM-920I) and went to root it the instant I got home. And that was where the problem all started. I used chainfire's auto-root and flashed it in odin under AP. The log in odin shows the firmware flash was successful but upon reboot my phone stays stuck on the boot logo screen. So I went to un-brick it by downloading the appropriate stock firmware for my phone (G920IDVU1AOD1_G920IOLC1AOD1_XSP.zip) (my phone is the Singapore variant of the 920I). This is the error I got on odin no matter how many tries I did.
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920IDVU1AOD1_G920IOLC1AOD1_G920IDVU1AOD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> cm.bin
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
And now I have no clue on how to fix and restore my phone back to its original state anymore. Help is greatly appreciated thanks!
EDIT: Solved... Just a simple reboot of my PC fixed the problem for me apparently...

Help Me with my phone

Hello
i had installed G920i INDIA 5.1.1 but today i downloaded G920i Trinidad and Tobago 5.1.1 (best firmware) and when i was installing it ODIN says FAIL and i forced device to reboot and it shows to me: error updating firmware, connect device to SmartSwitch.
- i was no downgrading my device in ODIN i dont know why it sayed to me FAIL.. WTF?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920IDVU2COF8_G920IUUB2COF9_G920IDVU2COF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> cm.bin
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img
<ID:0/008> cache.img
<ID:0/008> hidden.img
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
WHAT SHOULD I DO?

[Completed] unable to re install stock firmware on sprint s6 edge

i have used odin several times on my sprint s6 edge (rooted and running on lolipop 5..1.1 )but this time it is failing to re install the firmware and am getting this log ....
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
does anyone knows what is going on and how can i get to re install the firmware ?
Hello,
Have you verified that USB debugging is on? Have you tried a different USB port?
Try posting your question in the forum linked below.
http://forum.xda-developers.com/galaxy-s6-edge/help
The experts there may be able to help. Good luck.

Sm-g920f....g920fxxu2qoi9

My phone build number says G920FXXU2QOI9. would build number G920FXXU2BOG8 work on it??? kinda new to rooting so any help would be appreciated.
tried odin to install original firmware and this is what I got
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU2COH2_G920FBTU2COH3_G920FXXU2COH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008> cache.img
<ID:0/008> cm.bin
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Categories

Resources