Hey guys, I just got my S6 (SM-920I) and went to root it the instant I got home. And that was where the problem all started. I used chainfire's auto-root and flashed it in odin under AP. The log in odin shows the firmware flash was successful but upon reboot my phone stays stuck on the boot logo screen. So I went to un-brick it by downloading the appropriate stock firmware for my phone (G920IDVU1AOD1_G920IOLC1AOD1_XSP.zip) (my phone is the Singapore variant of the 920I). This is the error I got on odin no matter how many tries I did.
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920IDVU1AOD1_G920IOLC1AOD1_G920IDVU1AOD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> cm.bin
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
And now I have no clue on how to fix and restore my phone back to its original state anymore. Help is greatly appreciated thanks!
EDIT: Solved... Just a simple reboot of my PC fixed the problem for me apparently...
Related
Sorry to say, i tried to root Samsung GT-I9300 with help of Odin and CF-Autoroot, but got similar Messages as glenf (http://forum.xda-developers.com/showthread.php?t=2202563) and got stuck - no way to reaktivate handy (stockrom) but could manage to activate downloadmode .
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
.....
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write start!!
<ID:0/004> cache.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I used Odin 3.04 and CF-Auto-Root-m0-m0xx-gti9300.tar.md5 .
I rmoved battery to get into download mode again and tried to use Odin with a stockrom - the same effect.
I had a stockversion 4.3 MAX-I9300XXELLA-20130104192229 and thougt it would work to root - as in thread http://forum.xda-developers.com/showthread.php?t=1957273&page=63.
Anyone who can help me,Samsung is new to me, i did rooting and custom roms on HTC before, never had problems. I did not find a way out.
Regards Manfred
lavgold said:
Sorry to say, i tried to root Samsung GT-I9300 with help of Odin and CF-Autoroot, but got similar Messages as glenf (http://forum.xda-developers.com/showthread.php?t=2202563) and got stuck - no way to reaktivate handy (stockrom) but could manage to activate downloadmode .
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
.....
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write start!!
<ID:0/004> cache.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I used Odin 3.04 and CF-Auto-Root-m0-m0xx-gti9300.tar.md5 .
I rmoved battery to get into download mode again and tried to use Odin with a stockrom - the same effect.
I had a stockversion 4.3 MAX-I9300XXELLA-20130104192229 and thougt it would work to root - as in thread http://forum.xda-developers.com/showthread.php?t=1957273&page=63.
Anyone who can help me,Samsung is new to me, i did rooting and custom roms on HTC before, never had problems. I did not find a way out.
Regards Manfred
Click to expand...
Click to collapse
hi im having a similar problem with my s3 gt-19300.
its not rooted . suddenly it just went dead
and using samsung kies it failes after downloading the os.
using odin i get the following.:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMJ9_I9300VFGGMJ5_I9300BUUGMJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
any help??
Hey guys,
exactly the same Problem here... Tried diffrent USB ports, Odin versions and cables...
<OSM> CF-Auto-Root-m0-m0xx-gti9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> recovery.img
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
The reason I was rooting mainly was being unable to copy files to my phone... wtf. If you have any other solution for that on hand, I couldn't care less about rooting, so shoot
Thanks in Advance
Sorry to hear you're having problems try using Odin 3.07 instead of 3.04 worked for me.
Sent from my D5803 using XDA Free mobile app
Has anyone tried to downgrade a note edge from Android 5.0.1 to Android 4.4.4?
It is currently on N915PVPU2BOC8. I tried flashing N915PVPU1ANK1 downloaded from sammobile. But it fails in ODIN
Below is the log file. Any help will be highly appreciated.
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N915PVPU1ANK1_N915PSPT1ANK1_N915PVPU1ANK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
You cant just odin back to kitkat. The bootloader is the issue. Once you update the bootloader to lollipop, you're stuck. Unless, chainfire would update his mobile odin to be compatible to our devices. Then we would have a shot.
i have used odin several times on my sprint s6 edge (rooted and running on lolipop 5..1.1 )but this time it is failing to re install the firmware and am getting this log ....
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
does anyone knows what is going on and how can i get to re install the firmware ?
Hello,
Have you verified that USB debugging is on? Have you tried a different USB port?
Try posting your question in the forum linked below.
http://forum.xda-developers.com/galaxy-s6-edge/help
The experts there may be able to help. Good luck.
I have this problem i cant reflash it on odin. Ive already rooted the device because when i get this it has a deep sleep issue so i fix it. After i rooted and install twrp recovery it works fine. But after i accidentally rooted again. It stuck up to boot loop t mobile logo.
Now when im flashin it on odin it say fails en recovery mode says.
SW REV. CHECK FAIL. DEVICE: 4 BINARY 3
Here is the log file i get from odin when im flashing a stock firmware on odin
GT-N920T T-mobile
Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920TUVU3DPG1_N920TTMB3DPG1_N920TUVU3DPG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Somebody help me please? For this fix
Hi, I recently fixed my note edge by installing 4.4 kitkat. A few days later I realized it was really slow and so I plugged it in and tried to flash marshmallow stock. This didn't work and now my phone goes automatically to download mode and every time I try to re-flash it it either insta fails or says aboot fused 2 binary 1. Also, I think i got twrp installed because it passed on odin but if I try to boot recovery it Says "Could not do normal boot and ddi: mmc_read failed". Thanks for the help!
https://forum.xda-developers.com/note-4-tmobile/general/ddi-mmcread-failed-boot-error-fix-t3434335
Bordo_Bereli51 said:
https://forum.xda-developers.com/note-4-tmobile/general/ddi-mmcread-failed-boot-error-fix-t3434335
Click to expand...
Click to collapse
Thanks for the link but the files included in the guide are listed for the note 4 so how do I use that in note edge thanks for help
UPDATE
I have got phone into download/ odin mode but still need help as my flash fails in odin\
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
Same thing...
Here's my odin log.
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008>
<ID:0/008> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
P.s I have the AT&T model.
UPDATE
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N915AUCS2DQD1_CL8932341_QB13132575_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N915AUCS2DQD1_CL8932341_QB13132575_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N915AUCS2DQD1_CL8932341_QB13132575_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_N915AATT2DQD1_CL8932341_QB13132575_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> tz.mbn
<ID:0/008> sdi.mbn
<ID:0/008> NON-HLOS.bin
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img.ext4
<ID:0/008> FAIL! (Write)
<OSM> All threads completed. (succeed 0 / failed 1)
It failed half way through on the phone it says
"ODIN : flash write failure"
1) ODIN 3.09
2) Get N915A 5.0.1 Modem
3) Get N915A 6.0.1 Firmware Stock (the AP file)
4) Get N915A 6.0.1 Modem
1)Place phone in DOWNLOAD MODE (volume down + home + power button)
2) Open ODIN 3.09
3) Place file N915A 5.0.1 Modem in CP
4) Place file N915A 6.0.1 Firmware.tar in AP box
5) Once ODIN is finished flashing the files power off your phone and go back into DOWNLOAD MODE, dont boot.
6) Place file N915A 6.0.1 Modem in CP box
7) Once the file is flashed your phone will be mmc error free and you will have a 100% working phone again.
thejug786 said:
Hi, I recently fixed my note edge by installing 4.4 kitkat. A few days later I realized it was really slow and so I plugged it in and tried to flash marshmallow stock. This didn't work and now my phone goes automatically to download mode and every time I try to re-flash it it either insta fails or says aboot fused 2 binary 1. Also, I think i got twrp installed because it passed on odin but if I try to boot recovery it Says "Could not do normal boot and ddi: mmc_read failed". Thanks for the help!
Click to expand...
Click to collapse
Tell me, how could you return to 4.4.4? I also have n915a on marshmallow, but I would like to return to kitkate. Tell me how you did it ??
"A few days later I realized it was really slow" tells us maybe that this is a emmc failure problem
https://www.sammobile.com/forum/showthread.php?t=30686
In this forum, this guy has the same problem like you. He tried different attempts. Even though he flashed succesfully and booted up, his phone was very slow and had freezing problem. A while later he got again the "Could not do normal boot and ddi: mmc_read failed" problem.