Sorry to say, i tried to root Samsung GT-I9300 with help of Odin and CF-Autoroot, but got similar Messages as glenf (http://forum.xda-developers.com/showthread.php?t=2202563) and got stuck - no way to reaktivate handy (stockrom) but could manage to activate downloadmode .
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
.....
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write start!!
<ID:0/004> cache.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I used Odin 3.04 and CF-Auto-Root-m0-m0xx-gti9300.tar.md5 .
I rmoved battery to get into download mode again and tried to use Odin with a stockrom - the same effect.
I had a stockversion 4.3 MAX-I9300XXELLA-20130104192229 and thougt it would work to root - as in thread http://forum.xda-developers.com/showthread.php?t=1957273&page=63.
Anyone who can help me,Samsung is new to me, i did rooting and custom roms on HTC before, never had problems. I did not find a way out.
Regards Manfred
lavgold said:
Sorry to say, i tried to root Samsung GT-I9300 with help of Odin and CF-Autoroot, but got similar Messages as glenf (http://forum.xda-developers.com/showthread.php?t=2202563) and got stuck - no way to reaktivate handy (stockrom) but could manage to activate downloadmode .
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
.....
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write start!!
<ID:0/004> cache.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I used Odin 3.04 and CF-Auto-Root-m0-m0xx-gti9300.tar.md5 .
I rmoved battery to get into download mode again and tried to use Odin with a stockrom - the same effect.
I had a stockversion 4.3 MAX-I9300XXELLA-20130104192229 and thougt it would work to root - as in thread http://forum.xda-developers.com/showthread.php?t=1957273&page=63.
Anyone who can help me,Samsung is new to me, i did rooting and custom roms on HTC before, never had problems. I did not find a way out.
Regards Manfred
Click to expand...
Click to collapse
hi im having a similar problem with my s3 gt-19300.
its not rooted . suddenly it just went dead
and using samsung kies it failes after downloading the os.
using odin i get the following.:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMJ9_I9300VFGGMJ5_I9300BUUGMJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
any help??
Hey guys,
exactly the same Problem here... Tried diffrent USB ports, Odin versions and cables...
<OSM> CF-Auto-Root-m0-m0xx-gti9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> recovery.img
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
The reason I was rooting mainly was being unable to copy files to my phone... wtf. If you have any other solution for that on hand, I couldn't care less about rooting, so shoot
Thanks in Advance
Sorry to hear you're having problems try using Odin 3.07 instead of 3.04 worked for me.
Sent from my D5803 using XDA Free mobile app
Related
i tried flashing the latest DPBK bootloader via odin but it failed for some reason and now my s6 edge is softbricked. i tried flashing the latest 6.0.1 firmware from sammobile and it also failed. i cant flash anything via odin right now it just fails every try
can someone maybe help ?
got the bootloader and stuff from here:
http://forum.xda-developers.com/showpost.php?p=65588632&postcount=2578
here is the log
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU3DPB8_G925FVFG3DPB8_G925FXXU3DPB8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Hi All
I have tried to install several 6.01.1 roms, but odin keep being a pain in the neck.
Odin simply fails when it's trying to write to nand.
I have tried 4 different cables on 2 different PC, both with updated USB drivers.
What is wrong here ?
I have attached odin log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> cm.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
You've need a PIT file
DavideRodeo said:
You've need a PIT file
Click to expand...
Click to collapse
Where do i get such one ?
Which is the firmware?
DavideRodeo said:
Which is the firmware?
Click to expand...
Click to collapse
But it's a custom rom from this forum I'm going to install. There is not mentioned anything about using a pit file.
Custom rom? with odin?
Yup. It seems like it 's need when you go between 5.1.1 to 6.0.1. Have tried to install through TWRP, but the phone never starts up.
Did you try to rescue it via Smart Switch?
jchusted said:
Hi All
I have tried to install several 6.01.1 roms, but odin keep being a pain in the neck.
Odin simply fails when it's trying to write to nand.
I have tried 4 different cables on 2 different PC, both with updated USB drivers.
What is wrong here ?
I have attached odin log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> cm.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It's getting failed because the firmware which you are trying to flash is not compatible with your phone, that's not the issue with your pc or usb cables
Hi all,
I have Samsung Galaxy S6 G920F . I am trying to unroot my phone back to its factory settings. I downloaded the fimware and odin however i am getting below error message once i press the start in ODIN. I really dont have any idea what is going on. I tried different USB cables, frimware but didnt work out. Any help is highly appreciated . These are what i am getting ;
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> G920FXXU1AODE_G920FOXE1AODE_G920FXXU1AODE_HOME.tar .md5 is valid.
is this version of firmware lower than the one curently instaled.
i had similar problem
it appears that is was on portugal firmware G920FXXS4DPG2_G920FOXX3DPD1_TPH (latest update of 109MB) and was trying to downgrade to G920FXXU3DPDP_G920FOXX3DPD1_TWO ,and was getting error ''cm sw rev check fail device 4 binary 3''
and smart switch failed because my it was trying TWO_CRO with lower verion.
Hey guys, thats probaly the wrong place to ask for help, however I got really stuck with Odin3.
I tried to install a custon rom, which I downloaded from sammobile.com, but when I try to flash my phone I get this error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Maybe it's important to know that my phone has currently no OS running, well at least TWRP says that.
I tried 3 different Roms, but nothing seems to work.
I also tried Smart Switch but it does not work either.
I tried it on 2 PC's with the original cable, with other cables and in every Port my PC has.
Thank you for everyone who wwants to help!
its stock rom not custom
have you tried with newer version of Odin?
the latest should be 3.12.3
Hi,
I was wondering if someone could assist me on the issue im having. First i tried rooting Samsung gt-s7275b and failed completely and got stuck in odin mode, Then i tried downloading the stock firmware using this site samsung-firmware.org/es/download/Galaxy__Ace__3__LTE__-South__America-__/0963/COM/S7275BUBUAMJ2/S7275BUWAAMK1/ and extracted when i try to upload it thought pda on version 3.07 i get fail, then i tried 3.12.7 and i get unsupported dev on the phone. Now im not sure if what i download is the correct firmware. Not sure what to do
This is the error
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7275BUBUAMJ2_S7275BUWAAMK1_S7275BUBUAMJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Thank you