Database Info

[Completed] is my mobile bricked?

My mt6572 smartphone was working fine,but I flashed a ROM of different device EVEN replaced my stock preloader usin SPflashtool.SPflashtool popped up ok.
Now my mobile don't turn on,not go to recovery mode,meta mode,not detected by PC,NO ANY KIND OF SOUND,no change in device manger(i.e no mt65xx preloader...etc),if I install preloader drivers manually it gives error code 10(device cannot start)
Please don't say that "hold volume up+down ,power etc without battery,connect usb and put battery again."
IS my phone dead?but can flashing wrong ROM effect the hardware in someway?

UBAID09 said:
My mt6572 smartphone was working fine,but I flashed a ROM of different device EVEN replaced my stock preloader usin SPflashtool.SPflashtool popped up ok.
Now my mobile don't turn on,not go to recovery mode,meta mode,not detected by PC,NO ANY KIND OF SOUND,no change in device manger(i.e no mt65xx preloader...etc),if I install preloader drivers manually it gives error code 10(device cannot start)
Please don't say that "hold volume up+down ,power etc without battery,connect usb and put battery again."
IS my phone dead?but can flashing wrong ROM effect the hardware in someway?
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. Unfortunately, it does sound like a hard brick to me. You could ask for more opinions here:
Android Q&A, Help & Troubleshooting
Good luck!

Xperia L Bricked, EMMC DL TOOL HELP

I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.

I am not able to post image. Help me. I don't have 10 post count yet.

nik_123 said:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
Click to expand...
Click to collapse
So, you cannot get into flashmode or fastboot? Power off your phone, hold volume up and plug it into your pc without hitting the power button. Do you get any blue led or quick led flash at all? I'm not sure about your device's condition but I can surely try getting you files from my phone.
Try installing flashtool and see if flashtool recognizes your phone at all.

Agent_fabulous said:
So, you cannot get into flashmode or fastboot? Power off your phone, hold volume up and plug it into your pc without hitting the power button. Do you get any blue led or quick led flash at all? I'm not sure about your device's condition but I can surely try getting you files from my phone.
Try installing flashtool and see if flashtool recognizes your phone at all.
Click to expand...
Click to collapse
Only red LED glows while I plug it in PC. Flashtool can not recognize. EMMC tool recognize but can't find/download the files.
I am pretty sure once I get the tool running it will bring back my phone alive.

nik_123 said:
Only red LED glows while I plug it in PC. Flashtool can not recognize. EMMC tool recognize but can't find/download the files.
I am pretty sure once I get the tool running it will bring back my phone alive.
Click to expand...
Click to collapse
Hmm, can QPST find your phone? I'm trying to get a QPST/QCN backup which could be helpful. However, fastboot, flashmode, recovery or device running, I get ports empty. Can anyone help me out here? I can try draining my battery so I have the little phase of the dull red led where the device won't power on until it's a little charged.

Agent_fabulous said:
Hmm, can QPST find your phone? I'm trying to get a QPST/QCN backup which could be helpful. However, fastboot, flashmode, recovery or device running, I get ports empty. Can anyone help me out here? I can try draining my battery so I have the little phase of the dull red led where the device won't power on until it's a little charged.
Click to expand...
Click to collapse
I guess yes, but I don't remember exactly. Switch off your phone and connect may be it should detect.

nik_123 said:
I guess yes, but I don't remember exactly. Switch off your phone and connect may be it should detect.
Click to expand...
Click to collapse
Tried that but it ends up turning on and goes to the charging animation. (Which is after the Sony Logo.) Waiting for my phone to drain

nik_123 said:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
Click to expand...
Click to collapse
Jesus Christ, you installed a ROM without unlocking the bootloader first?... yare yare daze...

stuckbootloader said:
Jesus Christ, you installed a ROM without unlocking the bootloader first?... yare yare daze...
Click to expand...
Click to collapse
I unlocked it but the ROM zip was not flashing through TWRP. After 2-3 tries my phone went full dead. If you can help it will be great.

nik_123 said:
I unlocked it but the ROM zip was not flashing through TWRP. After 2-3 tries my phone went full dead. If you can help it will be great.
Click to expand...
Click to collapse
I'm afraid I can't...

Agent_fabulous said:
Tried that but it ends up turning on and goes to the charging animation. (Which is after the Sony Logo.) Waiting for my phone to drain
Click to expand...
Click to collapse
eh... if your device is showing loading anymation this means charger is loaded.... so no you dont have a hardbrick... try to reach fastbootmode over and over again
Sent from my Xperia T using XDA Free mobile app

SdtBarbarossa said:
eh... if your device is showing loading anymation this means charger is loaded.... so no you dont have a hardbrick... try to reach fastbootmode over and over again
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
My phone is working fine. However, I've no idea how to get a QPST/QCN Backup (which I guess could) help out @nik_123

Agent_fabulous said:
My phone is working fine. However, I've no idea how to get a QPST/QCN Backup (which I guess could) help out @nik_123
Click to expand...
Click to collapse
nope... even if we have a snapdragon... since this is a semcflash device a backup is useless...
Sent from my Xperia T using XDA Free mobile app

Hello sir,
I had the same problem a month ago and I fixed my bricked Xperia L.
Just go to this thread and follow the steps ^^
http://forum.xda-developers.com/showthread.php?t=2695344
The thread says u need to download WMSHUA, but its in chinese language. If you don't know what it means just reply to this and i will translate it.
Good luck!
If it didn't worked, or u need help reply.

[Completed] Potentially Hardbricked phone but PC still detects when plugged in

I think my phone has been hard-bricked, as it will not turn on whatsoever after I installed an xposed framework. However when I plug it into my computer, the USB sound plays, indicating a USB devices has been plugged in. My phone does not show up on ADB or Fastboot however. Does this mean all hope is lost still?
My phone is a Huawei Y625 running on Firmware U43

OrewaHighNoon said:
I think my phone has been hard-bricked, as it will not turn on whatsoever after I installed an xposed framework. However when I plug it into my computer, the USB sound plays, indicating a USB devices has been plugged in. My phone does not show up on ADB or Fastboot however. Does this mean all hope is lost still?
My phone is a Huawei Y625 running on Firmware U43
Click to expand...
Click to collapse
Greetings and welcome to xda, I found this thread here which may fix your issue
http://forum.xda-developers.com/android/help/huawei-y625-u32-hard-brick-problem-t3463940
Good luck
Sawdoctor

sawdoctor said:
Greetings and welcome to xda, I found this thread here which may fix your issue
http://forum.xda-developers.com/android/help/huawei-y625-u32-hard-brick-problem-t3463940
Good luck
Sawdoctor
Click to expand...
Click to collapse
You see, the issue is my phone won't turn on whatsoever.
And that tutorial requires that my phone is powered on to install the flashify apk.

OrewaHighNoon said:
You see, the issue is my phone won't turn on whatsoever.
And that tutorial requires that my phone is powered on to install the flashify apk.
Click to expand...
Click to collapse
I'm sorry about that, I am not familiar with your device. If you ask your question here
http://forum.xda-developers.com/android/help
hopefully the experts there can help you
Good Luck
Sawdoctor

[Completed] my yuphoria 5010 is hard bricked. it neither switch on nor fastboot menu is opening.

i was changing my rom to the stock rom yu5010a. my phone switched off and now it neither switch on nor opens the fastboot loader menu. it is not even charging. i connected my phone via USB with laptop but it is unrecognizable. it is not recognised by the laptop also. i've read articles about qualcomm 9800 mode and other articles too. but my phone is unrecognizable so i am unable to do anything. please help me. tell me in detail what to do to unbrick my phone

XDA Visitor said:
i was changing my rom to the stock rom yu5010a. my phone switched off and now it neither switch on nor opens the fastboot loader menu. it is not even charging. i connected my phone via USB with laptop but it is unrecognizable. it is not recognised by the laptop also. i've read articles about qualcomm 9800 mode and other articles too. but my phone is unrecognizable so i am unable to do anything. please help me. tell me in detail what to do to unbrick my phone
Click to expand...
Click to collapse
Greetings!
Thank you for using XDA Assist.
First, please register an account so you can post in our forums. After that, please have a look at the YUphoria homepage:
http://forum.xda-developers.com/yu-yuphoria
You can post our questions here:
http://forum.xda-developers.com/yu-yuphoria/help
Good luck and welcome to XDA!

Bricked Moto G7 Power

Good day everyone.
I have a Moto G7 Power Ocean blue that got bricked while trying to preform an update. I may have accidentally used a wrong firmware and the phone is totally dead, it doesn't turn on at all. However when I plug the phone to my laptop using USB cable, I hear a connection sound (Chim) from the laptop but there is no drive icon on my computer nor any visual notification that my phone is connected to the laptop.
I have also download the blank flash file from one of the threads on this platform and after an hour there was an error. And nothing happened.
Lastly, I've attampted to rescuing the phone using the LMSA tool from Lenovo and that wasn't successful either. So if anyone is out there who can help, I really appreciate it. Thanks in advance

Solo-Play said:
Good day everyone.
I have a Moto G7 Power Ocean blue that got bricked while trying to preform an update. I may have accidentally used a wrong firmware and the phone is totally dead, it doesn't turn on at all. However when I plug the phone to my laptop using USB cable, I hear a connection sound (Chim) from the laptop but there is no drive icon on my computer nor any visual notification that my phone is connected to the laptop.
I have also download the blank flash file from one of the threads on this platform and after an hour there was an error. And nothing happened.
Lastly, I've attampted to rescuing the phone using the LMSA tool from Lenovo and that wasn't successful either. So if anyone is out there who can help, I really appreciate it. Thanks in advance
Click to expand...
Click to collapse
If you have an identical phone, just clone the partition and image over to the dead phone.
Enjoy the club
Sent from my LG-LS997 using Tapatalk

Unfortunately. I don't have that. I was wondering if there were a step by step tutorial or tool to use to get started with the process.

Solo-Play said:
Unfortunately. I don't have that. I was wondering if there were a step by step tutorial or tool to use to get started with the process.
Click to expand...
Click to collapse
There are many thread how to restore image.
Or just simple to run firehose programmer (download and flash the blankflash) to able restore fastboot first
Sent from my moto g(7) power using Tapatalk

Do you have a link or a website by any chance!

Solo-Play said:
Do you have a link or a website by any chance!
Click to expand...
Click to collapse
Go y telagram for the g7 power there is alot of info there that might help u out good luck

Hello again,
y telagram،, is that a website! I googled it and there was nothing.

Solo-Play said:
Hello again,
y telagram،, is that a website! I googled it and there was nothing.
Click to expand...
Click to collapse
Google Moto g7 power telagram should come up with it.

Solo-Play said:
Hello again,
y telagram،, is that a website! I googled it and there was nothing.
Click to expand...
Click to collapse
It's another walled garden that requires a phone # to register for, you know, "security". And profit!
Include "MotoG7Brasil" or "mG7Power" in the query.
Or, search around here or lolinet to find the correct Blankflash zip.

googleverifysux said:
It's another walled garden that requires a phone # to register for, you know, "security". And profit!
Include "MotoG7Brasil" or "mG7Power" in the query.
Or, search around here or lolinet to find the correct Blankflash zip.
Click to expand...
Click to collapse
Get an wifi number or get an free TextNow num and sign up with that