Database Info

Feiteng H7100 Bricked

Hello,
I managed to brick my new Feiteng H7100 phone, i flashed wrong rom to it and got a greenish screen when trying to start the phone.
So i formatted the phone in SPFT tool "Format whole flash" and from then it stopped responding, i cant start the phone anymore, and the charging indicator wont light up when charging.
When connecting the phone to try and reflash it the computer recognizes that i have connected the phone to the computer, but flashing doesnt work.
It is the S7180 with 1GB ram.
I hope there is a solution to it and it can be fixed, iam not sure if this can be called had brick or soft brick.
Was very close to throw it out of the window yesterday, but then thought i can give it a chance
Thanks

Have you found a solution to the problem? I have a similar problem. Dead after flash ROM
please help me
Thanks

Mine is dead also
jemmars said:
Have you found a solution to the problem? I have a similar problem. Dead after flash ROM
please help me
Thanks
Click to expand...
Click to collapse
Same mine is completely dead after I flash it - Its not recognized by the originally drivers in windows 7. Showing up as an Unknown Device.

if it is showing up as an device, it isn`t bricked. you need to get the right firmware and flash it again. force install the drivers for the unknown device or take the drivers for Rom you flashed. (e.g. flashed wrong preloader from ZTE to a Star device, need to install ZTE drivers)

While I don't know the specifics of the Feiteng H7100, I've "bricked" many an android phone and tablet. Fortunately it's usually easy to fix.
1) Reboot the device into CWM Recovery Mode (usually by holding power and volume buttons at the same time)
2) Plug it into your computer & run "adb devices" - if you device comes up as a Recovery device, then you're probably home free
3) Run an "adb push newly_downloaded_cyanogenmod_rom.zip /sdcard/" - the data location (/sdcard/ in this example) might vary depending on your device
4) Wipe Cache
5) Install Zip from sdcard and choose your new_rom.zip

Bricked A536

Hello. I have big problem-
I had the TWRP om my phone with custom rom and all worked fine.
Today i wanted to get my phone back as original so i downloaded original rom.
Started SP flashtools and used android scatter file from original android rom. Everything was fine till the end of downloading (it took like 10 mins! when i got some error : S_DL_GET_DRAM_SETTING_FAIL (5054)
I tried to to the steps again, start SP flashtools, press to download, plug the cable. Heard the sound of connected USB (cable) but immediatelly i hear the disconnect of the cable with phont and i got message:
BROM ERROR: S_FT_DA_NO_RESPONSE (4001)
DA didnt responsne data to flashtools
And now i can not do nothing. When i check device manager, i see USB serial device only. No mtk, no mediatek. I tried some ways how to install the driver but idk. i am failing. I am retard oh god...
Still, i heard that there is still the way to make this phone work because it is mediatek based.
Can you guys please help me?
I am using Windows 10 but i also can use Zorin OS Linux. Windows is default.

Good damn guys i was so sad but i managed to fix the thingy and now my phone is working back again.
As most of ppl what i was able to read so far, had the problem with recognizing phone without battery. PC was not able to recognize it as Mediatek, just some random serial device. Nothing really worked and i was about to ....nvm
But what i tried is, to do NOT remove the battery. I pressed the VOLUME UP button, while i hold it and while battery was inside i started flash tool. Pressed download an dthen while i was holding the button volume UP and with battery in, it suddently was able to find the device and it flashed my phone.
Oh deear i am so happy . Maybe this will help to someone so back again
If your device is not recognized as MEDIATEK device and you need to use SP Flash Tools to flash the ROM, use the following
Remove SIM cards, SD Card
Leave battery in phone
Run sp flash tools and set your settings as you need (load scatter file from your unpacked rom)
Press the download button in SP FLash Tools
Now, still do not remove battery. Press the Volume UP button and hold it
Plug in the USB cable into PC and into Phone while you still holding the volume button
Release the volume button right in moment, when your device is plugged in and found by system (YOu hear the connected sound).
Now i believe, everything works and its flashing your phone
If not. so i was lucky as f....

Great
Thanks, this is great.

HELP! Recovering my bricked Mi4

Since Xiaomi and Micro$oft released a public ROM of Windows 10 Mobile for Mi4, the curiosity drives me to try it. But I felt so uncomfortable after successfully installed win10 on my mi4.
So I decided go back to Android roms. But sh*t happened - my mi4 got bricked during the flashing.
Phone won't boot with black screen and no boot options. Holding any buttons (including power button + volume down more than 2 minutes) won't work.
The pc can not recognize a USB device after it is plugged in (in both Windows XP and Windows 8.1).
Then I plug it into my Mac OS X with a VirtualBox of Windows 7 OS inside.
The USB devices shows a unknown device of id 05C6:F006.
I did a lot of googling of 05c6:f006 which seems to be 05c6:9008 and something Qualcomm related.
And the most important thing is to make my computer to recognize it.
So things I need to figure out:
Is my phone hardware damaged or software damaged (hard bricked or soft bricked)?
Do I need to disassemble it?
How can I make my pc to recognize it ?

Please add screenshot of your phone state. Maybe we can determine if its a hardware or software issue

darkmaster566 said:
Please add screenshot of your phone state. Maybe we can determine if its a hardware or software issue
Click to expand...
Click to collapse
My phone was recognized as a USB input device, VID_05C6&PID_F006, seems to be Qualcomm_QHSUSB 9008 related

I have exacly the same probleme here, do you have find any solution ?

If it's getting recognised, we can try flashing another recovery or directly boot into recovery from command prompt by using command fastboot boot recovery.img
Try this and let me know if it works

xiaomi mi4 lte not turn on
darkmaster566 said:
If it's getting recognised, we can try flashing another recovery or directly boot into recovery from command prompt by using command fastboot boot recovery.img
Try this and let me know if it works
Click to expand...
Click to collapse
Good evening. I have a problem with my Xiaomi 4 lte, after trying to return from 6 to android 4.4 android after this tutorial : ]Now the phone does not start, if you stick to connect to PC loaded or red LED flashes once and the computer sounds like something I plugged in but not afiseaja nimicc device. He is charged for 24 hours and not start and MIFLASH program is not found

Mi4w hard brick
darkmaster566 said:
Please add screenshot of your phone state. Maybe we can determine if its a hardware or software issue
Click to expand...
Click to collapse
Hey! I had bymistakely flashed wrong partition and tried flash in miii 6.3.3 ROM....
Now my device is bricked....Whenever i connect to charger the red light blinks....And when connected to pc....The red light comes.....But no drivers come on my pc...Means its to recognising.....Can you help me please????

[SOLVED]Lenovo A536 Hard bricked

Hi, please I need your help. I tried to flash stock ROM but I hard bricked my phone. When I connect phone with computer I'm holding volume up button. In device manager it shows "MediaTek USB Port (COM4)" but after three seconds it disconnect. This is why I can't flash ROM. It's everytime disconnect after three seconds.. Please help me.

Maybe you can try to follow this step :http://www.engineerthink.com/blog/2015/11/how-to-unbrick-hard-bricked-android-phone/
If didnt work,maybe there is a problem in your hardware,try to service your phone to service center.

It didn't work.. Is there a way how to solve hardware problem?

Or trt another ways in this website
http://androidflagship.com/3217-fix-damaged-bricked-android-device
My note 10.1 N8000 have the same problem,i try to fix it,but its hard,so i send my phone to service person,they fix the hardware..

How much did you pay?

Growicek said:
Hi, please I need your help. I tried to flash stock ROM but I hard bricked my phone. When I connect phone with computer I'm holding volume up button. In device manager it shows "MediaTek USB Port (COM4)" but after three seconds it disconnect. This is why I can't flash ROM. It's everytime disconnect after three seconds.. Please help me.
Click to expand...
Click to collapse
What tool are you using to flash the stock firmware .and it will be helpful if you say how exactly you bricked it

I'm using SP Flash Tool for flashing.. I tried to flash stock ROM into my Lenovo A536, when it was done I unplugged phone from computer and tried to power on but there was a problem.. Phone was hard bricked

Growicek said:
I'm using SP Flash Tool for flashing.. I tried to flash stock ROM into my Lenovo A536, when it was done I unplugged phone from computer and tried to power on but there was a problem.. Phone was hard bricked
Click to expand...
Click to collapse
So your saying the flashtool bricked your phone ?
Where did you get the firmware for your phone cuz flash tool can only brick your device if you used firmware not for your phone. Also does your phone shows any sign of life ie vibrate turn on for a sec, bootloop etc...

I don't remember where did I find it.. There is only one sign of phone life. When I connect it with computer, phone connect but only for a while, after a three seconds disconnect.

Growicek said:
I don't remember where did I find it.. There is only one sign of phone life. When I connect it with computer, phone connect but only for a while, after a three seconds disconnect.
Click to expand...
Click to collapse
I know two guys who had this problems.
1) guy took it to service ,they fixed it.
2) installed phone drivers again and tried again and it worked.
If you're confident you have the right firmware load scatter click download and connect your powered off phone without pressing any buttons ,and see if it works.
Anyway I'm narrowing down the cause of the problem to either an incorrect firmware or a sp flash tool version (some version are ****)

Didn't work

Growicek said:
Didn't work
Click to expand...
Click to collapse
Pull out the battery then leave it for 10 min reinsert and see if it boots (give it some time ) .if it doesn't
Or connect your phone to PC(without battery) ,load scatter click download on sp flash tool ,then put in the battery .

First method - didn't work
Second method - device automatically disconnect after three seconds, so SP flash tool says error

Growicek said:
First method - didn't work
Second method - device automatically disconnect after three seconds, so SP flash tool says error
Click to expand...
Click to collapse
What error code?
I bricked my device same as you so I could help you further but my device connected in meta mode and flashed its firmware fine ,so try another USB cord
Ps I've pretty much mentioned all I know about unbricking in this thread so I can't be of further help.https://www.google.co.in/url?sa=t&s...ggeMAA&usg=AFQjCNGkwgZbNQCJFWtm90DM-Mksnzk0dA look this up specifically #9

It didn't work.. Error is: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)

Wow! I did something and then uninstalled driver. When I connected phone, driver automatically installed and now it's not disconnecting, but still can't flash it

Growicek said:
Wow! I did something and then uninstalled driver. When I connected phone, driver automatically installed and now it's not disconnecting, but still can't flash it
Click to expand...
Click to collapse
That's great ,what's the problem now ? Still brom error or download stuck st 0% or any other?

Still same brom error

Growicek said:
Still same brom error
Click to expand...
Click to collapse
Brom error is mostly related to see improper firmware which also explains why you're phone got bricked in the first place .
Try downloading another stock firmware

Man? I love you!!! I tried about four ROMs and the fourth is working!! .. There was a one more problem with flashing again with drivers, idk why but they dissapear, so I installed them again and then tried flash ROM.. Thank you very much! You saved my money!

[Completed] Karbonn sparkle V :android one stock recovery

At first,i want to clear my issue.
I have karbonn sparkle v (NOT ROOTED).this phone got september update and stuck at android is starting,optimizing applications and google logon screen.
Then i decided to factory reset the phone with recovery boot but didnt works.
i thought that may be recovered from installing old update i.e.august or previous..i searched and downloaded the update file and update from sd card as mentioned in some of the XDA posts...didnot work.
at final,i decided to stock recovery using SP flash tool.got stock rom and driver installed as mentioned in XDA post and other videos as well.MTK VCOM driver as well as mobile drivers installed and stock ROM downlaoded..But when i open latest SP flash tool and try to connect to phone.it did not.. it tried all possible ways to connect like removing battery ,or removing and inserting with volume button pressed or other...while connecting without battery ,nothing happens in PC driver list,no sound nothing.Sp flash tool doesnot recognise chip and downloading /flashing could not happened...
i had flashed some phones using same method and while connecting with pressing volume key ,flashing started.
But i this case ,what happened i dont know,device is not connected but charges and same stuck at boot screen and device manager shows SPARKLE V in portable device list.
I hope some help make my phone .

ranjand said:
At first,i want to clear my issue.
I have karbonn sparkle v (NOT ROOTED).this phone got september update and stuck at android is starting,optimizing applications and google logon screen.
Then i decided to factory reset the phone with recovery boot but didnt works.
i thought that may be recovered from installing old update i.e.august or previous..i searched and downloaded the update file and update from sd card as mentioned in some of the XDA posts...didnot work.
at final,i decided to stock recovery using SP flash tool.got stock rom and driver installed as mentioned in XDA post and other videos as well.MTK VCOM driver as well as mobile drivers installed and stock ROM downlaoded..But when i open latest SP flash tool and try to connect to phone.it did not.. it tried all possible ways to connect like removing battery ,or removing and inserting with volume button pressed or other...while connecting without battery ,nothing happens in PC driver list,no sound nothing.Sp flash tool doesnot recognise chip and downloading /flashing could not happened...
i had flashed some phones using same method and while connecting with pressing volume key ,flashing started.
But i this case ,what happened i dont know,device is not connected but charges and same stuck at boot screen and device manager shows SPARKLE V in portable device list.
I hope some help make my phone .
Click to expand...
Click to collapse
Greetings and welcome to assist. It looks like this may be an issue with finding the correct drivers for your phone. I found this post which may help you
https://forum.xda-developers.com/showpost.php?p=68372526&postcount=4
Good Luck
Sawdoctor