Hello. I have big problem-
I had the TWRP om my phone with custom rom and all worked fine.
Today i wanted to get my phone back as original so i downloaded original rom.
Started SP flashtools and used android scatter file from original android rom. Everything was fine till the end of downloading (it took like 10 mins! when i got some error : S_DL_GET_DRAM_SETTING_FAIL (5054)
I tried to to the steps again, start SP flashtools, press to download, plug the cable. Heard the sound of connected USB (cable) but immediatelly i hear the disconnect of the cable with phont and i got message:
BROM ERROR: S_FT_DA_NO_RESPONSE (4001)
DA didnt responsne data to flashtools
And now i can not do nothing. When i check device manager, i see USB serial device only. No mtk, no mediatek. I tried some ways how to install the driver but idk. i am failing. I am retard oh god...
Still, i heard that there is still the way to make this phone work because it is mediatek based.
Can you guys please help me?
I am using Windows 10 but i also can use Zorin OS Linux. Windows is default.
Good damn guys i was so sad but i managed to fix the thingy and now my phone is working back again.
As most of ppl what i was able to read so far, had the problem with recognizing phone without battery. PC was not able to recognize it as Mediatek, just some random serial device. Nothing really worked and i was about to ....nvm
But what i tried is, to do NOT remove the battery. I pressed the VOLUME UP button, while i hold it and while battery was inside i started flash tool. Pressed download an dthen while i was holding the button volume UP and with battery in, it suddently was able to find the device and it flashed my phone.
Oh deear i am so happy . Maybe this will help to someone so back again
If your device is not recognized as MEDIATEK device and you need to use SP Flash Tools to flash the ROM, use the following
Remove SIM cards, SD Card
Leave battery in phone
Run sp flash tools and set your settings as you need (load scatter file from your unpacked rom)
Press the download button in SP FLash Tools
Now, still do not remove battery. Press the Volume UP button and hold it
Plug in the USB cable into PC and into Phone while you still holding the volume button
Release the volume button right in moment, when your device is plugged in and found by system (YOu hear the connected sound).
Now i believe, everything works and its flashing your phone
If not. so i was lucky as f....
Great
Thanks, this is great.
Related
I decided I wanted to change the firmware .. I did not do this for the first time so I downloaded the beta Accura SAMBA v2, with ciekowoĊci with UPK.zip. I plugged the phone to upload ZIPA the card and started | drinking heavy digging in UPK.zip CWM.exe shoved and there, not knowing that he will immediately do something. It turned out that he started flashign - now like a brick phone detects omap4430 but after installing the drivers in Device Manager / Ports LG CDMA, there is no serial ports and LGflash Tool does not detect my phone. The system is win xp. Could only service?
(google translate)
did you try putting it in download mode take the battery out hold volume down and power i think then plug the usb in keep holding buttons tell the phone vibrates or device manager finds it.
Which OS are u using(Windows 7 or XP). I bricked the phone multiple times trying to install the wrong CWM onto the phone as the latest version of rom manager did not have the O3D as an option. I tried to recover in Windows 7 and couldn't. Had to be done in Windows XP.
If it is still bricked, let me know and i will forward a link to the recovery page to get the phone back up and running.
Kavir
Prior to obtaining answers the phone sent the unit if the warranty does not include a guarante (phone rooted) back to the topic.
(google translate)
On instalation with kdz file show me KDz Error and i ll removed a battery in emergency mode....And now my phone won't turn on..
Help me....
hard bricked my LG Optimus One when i remove a battery after kdz error..
my phone can't Connect on PC i have instaled USb drivers properly....After removed a battery in kdz error on emergency mode phone won't turn
There is an emergency mode you can try as long as you have the software on your computer to flash factory settings on to your phone.
Toemergency mode:
1) Take out the battery
2) Have a usb cable already connected to the computer.
3) Hold the power button + volume up + back button AND then connect the usb while holding those buttons
Yellow screen will appear with the words emergency mode in the middle.
At this point, do some forum searching, find some kind of stock image file and LG program to flash stock system on to the phone.
**I DONT OWN THIS DEVICE** but i had a few cases and this should work for you too
...........
ThatLatinGuy said:
There is an emergency mode you can try as long as you have the software on your computer to flash factory settings on to your phone.
Toemergency mode:
1) Take out the battery
2) Have a usb cable already connected to the computer.
3) Hold the power button + volume up + back button AND then connect the usb while holding those buttons
Yellow screen will appear with the words emergency mode in the middle.
At this point, do some forum searching, find some kind of stock image file and LG program to flash stock system on to the phone.
**I DONT OWN THIS DEVICE** but i had a few cases and this should work for you too
Click to expand...
Click to collapse
Thanks Buudy for this but is no worked i do it that....my phone still won't turn on
My PC don't a find any usb cable from the phone..in the device menager in PORTS show me UKNOWN USB !
i can't connect a phone on PC
i have several android softwares...
i think a instalation is not complete on my phone and i wanna find some TOOL program for Clean a not completed instalation...
maybe in the phone hardware is broken processor...but i don't sure for that... .
Give me some tool for clean a not completed instaltion.... BC wipe is a for parchase 20$ Some FREE if u Know...
Or something other instruction for a connect phone to the PC...
Sorry for bad english.... :laugh:
Deki1231 said:
Thanks Buudy for this but is no worked i do it that....my phone still won't turn on
My PC don't a find any usb cable from the phone..in the device menager in PORTS show me UKNOWN USB !
i can't connect a phone on PC
i have several android softwares...
i think a instalation is not complete on my phone and i wanna find some TOOL program for Clean a not completed instalation...
maybe in the phone hardware is broken processor...but i don't sure for that... .
Give me some tool for clean a not completed instaltion.... BC wipe is a for parchase 20$ Some FREE if u Know...
Or something other instruction for a connect phone to the PC...
Sorry for bad english.... :laugh:
Click to expand...
Click to collapse
Your device is hard-bricked. Your only bet in LG. Go to LG and tell them you turned it off, and now it doesn't start up
That thing happened to my phone a year ago. You can't do nothing at home. Go to a service.
------------------
Sent from my LG-P500 using xda-developers app
Android 2.3.7
Cyanogen Mod 7.2
Can u Plz tell Whr I can download stock rom for lg optimus one in Kdz format
Sent from my GT-I9082 using Tapatalk 2
Hi, please I need your help. I tried to flash stock ROM but I hard bricked my phone. When I connect phone with computer I'm holding volume up button. In device manager it shows "MediaTek USB Port (COM4)" but after three seconds it disconnect. This is why I can't flash ROM. It's everytime disconnect after three seconds.. Please help me.
Maybe you can try to follow this step :http://www.engineerthink.com/blog/2015/11/how-to-unbrick-hard-bricked-android-phone/
If didnt work,maybe there is a problem in your hardware,try to service your phone to service center.
It didn't work.. Is there a way how to solve hardware problem?
Or trt another ways in this website
http://androidflagship.com/3217-fix-damaged-bricked-android-device
My note 10.1 N8000 have the same problem,i try to fix it,but its hard,so i send my phone to service person,they fix the hardware..
How much did you pay?
Growicek said:
Hi, please I need your help. I tried to flash stock ROM but I hard bricked my phone. When I connect phone with computer I'm holding volume up button. In device manager it shows "MediaTek USB Port (COM4)" but after three seconds it disconnect. This is why I can't flash ROM. It's everytime disconnect after three seconds.. Please help me.
Click to expand...
Click to collapse
What tool are you using to flash the stock firmware .and it will be helpful if you say how exactly you bricked it
I'm using SP Flash Tool for flashing.. I tried to flash stock ROM into my Lenovo A536, when it was done I unplugged phone from computer and tried to power on but there was a problem.. Phone was hard bricked
Growicek said:
I'm using SP Flash Tool for flashing.. I tried to flash stock ROM into my Lenovo A536, when it was done I unplugged phone from computer and tried to power on but there was a problem.. Phone was hard bricked
Click to expand...
Click to collapse
So your saying the flashtool bricked your phone ?
Where did you get the firmware for your phone cuz flash tool can only brick your device if you used firmware not for your phone. Also does your phone shows any sign of life ie vibrate turn on for a sec, bootloop etc...
I don't remember where did I find it.. There is only one sign of phone life. When I connect it with computer, phone connect but only for a while, after a three seconds disconnect.
Growicek said:
I don't remember where did I find it.. There is only one sign of phone life. When I connect it with computer, phone connect but only for a while, after a three seconds disconnect.
Click to expand...
Click to collapse
I know two guys who had this problems.
1) guy took it to service ,they fixed it.
2) installed phone drivers again and tried again and it worked.
If you're confident you have the right firmware load scatter click download and connect your powered off phone without pressing any buttons ,and see if it works.
Anyway I'm narrowing down the cause of the problem to either an incorrect firmware or a sp flash tool version (some version are ****)
Didn't work
Growicek said:
Didn't work
Click to expand...
Click to collapse
Pull out the battery then leave it for 10 min reinsert and see if it boots (give it some time ) .if it doesn't
Or connect your phone to PC(without battery) ,load scatter click download on sp flash tool ,then put in the battery .
First method - didn't work
Second method - device automatically disconnect after three seconds, so SP flash tool says error
Growicek said:
First method - didn't work
Second method - device automatically disconnect after three seconds, so SP flash tool says error
Click to expand...
Click to collapse
What error code?
I bricked my device same as you so I could help you further but my device connected in meta mode and flashed its firmware fine ,so try another USB cord
Ps I've pretty much mentioned all I know about unbricking in this thread so I can't be of further help.https://www.google.co.in/url?sa=t&s...ggeMAA&usg=AFQjCNGkwgZbNQCJFWtm90DM-Mksnzk0dA look this up specifically #9
It didn't work.. Error is: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
Wow! I did something and then uninstalled driver. When I connected phone, driver automatically installed and now it's not disconnecting, but still can't flash it
Growicek said:
Wow! I did something and then uninstalled driver. When I connected phone, driver automatically installed and now it's not disconnecting, but still can't flash it
Click to expand...
Click to collapse
That's great ,what's the problem now ? Still brom error or download stuck st 0% or any other?
Still same brom error
Growicek said:
Still same brom error
Click to expand...
Click to collapse
Brom error is mostly related to see improper firmware which also explains why you're phone got bricked in the first place .
Try downloading another stock firmware
Man? I love you!!! I tried about four ROMs and the fourth is working!! .. There was a one more problem with flashing again with drivers, idk why but they dissapear, so I installed them again and then tried flash ROM.. Thank you very much! You saved my money!
Hello XDA Members!
I have a problem, i have an Lenovo A2010-a which has a bootloop, and i try to fix it.
I found this video on YouTube www youtube com/watch?v=a06g3r3I88Y (Sorry for the removing of the dots but the forum doesn't let me put the link after 10 posts, i hope i will not be warned for that) which presents how to flash the Stock ROM with SP Flash Tool and with provided link for all the stuff you need to flash it.
So let's go, i downloaded the RAR from the link which has MTK Drivers, The Stock ROM and the SP Flash Tool v5 itself.
I installed the drivers, opened SP Flash Tool with Run as Administrator, put the Scatter file from the ROM and pressed Download, then i put the USB cable on the phone turned off pressing Volume DOWN, then i saw the computer recognized the phone and the process was about to begin, it finished Download DA and now the problem occurs, the Download Boot Loader is stuck at 0% and then after 2 minutes of waiting it gives me an error: S_FT_DOWNLOAD_FAIL (4008)
The SP Flash Tool Version is v5.1516 and the MTK Drivers are installed
I don't know what to do to make it work, the phone's battery is charged 99%, The Drivers are installed, i redownloaded the file with the rom and the drivers but it seems to just not work. I want to say that i don't have the Original USB Cable for the phone but i think it doesn't matter, and also i put the USB cable in other USB Ports but it still doesn't work.
Sorry for my English, i hope i will get a fix for that, Thanks in advance!
Stinray said:
Hello XDA Members!
I have a problem, i have an Lenovo A2010-a which has a bootloop, and i try to fix it.
I found this video on YouTube www youtube com/watch?v=a06g3r3I88Y (Sorry for the removing of the dots but the forum doesn't let me put the link after 10 posts, i hope i will not be warned for that) which presents how to flash the Stock ROM with SP Flash Tool and with provided link for all the stuff you need to flash it.
So let's go, i downloaded the RAR from the link which has MTK Drivers, The Stock ROM and the SP Flash Tool v5 itself.
I installed the drivers, opened SP Flash Tool with Run as Administrator, put the Scatter file from the ROM and pressed Download, then i put the USB cable on the phone turned off pressing Volume DOWN, then i saw the computer recognized the phone and the process was about to begin, it finished Download DA and now the problem occurs, the Download Boot Loader is stuck at 0% and then after 2 minutes of waiting it gives me an error: S_FT_DOWNLOAD_FAIL (4008)
The SP Flash Tool Version is v5.1516 and the MTK Drivers are installed
I don't know what to do to make it work, the phone's battery is charged 99%, The Drivers are installed, i redownloaded the file with the rom and the drivers but it seems to just not work. I want to say that i don't have the Original USB Cable for the phone but i think it doesn't matter, and also i put the USB cable in other USB Ports but it still doesn't work.
Sorry for my English, i hope i will get a fix for that, Thanks in advance!
Click to expand...
Click to collapse
try remove the battery and start the download BEFORE your phone is connected to the computer. when your phone is connected, press volume buttons to aid detection by your computer. the download should start.
i had the same phone which i tried to recover but it was unpredictable after reflashing; it could sometimes finish booting and go to the OS but everything stopped and crashed immediately... or it would not boot at all (stuck at Lenovo logo or the second animated logo). after many times attempting to recover, i gave up, junked it, and bought another phone.
Stinray said:
Hello XDA Members!
I have a problem, i have an Lenovo A2010-a which has a bootloop, and i try to fix it.
I found this video on YouTube www youtube com/watch?v=a06g3r3I88Y (Sorry for the removing of the dots but the forum doesn't let me put the link after 10 posts, i hope i will not be warned for that) which presents how to flash the Stock ROM with SP Flash Tool and with provided link for all the stuff you need to flash it.
So let's go, i downloaded the RAR from the link which has MTK Drivers, The Stock ROM and the SP Flash Tool v5 itself.
I installed the drivers, opened SP Flash Tool with Run as Administrator, put the Scatter file from the ROM and pressed Download, then i put the USB cable on the phone turned off pressing Volume DOWN, then i saw the computer recognized the phone and the process was about to begin, it finished Download DA and now the problem occurs, the Download Boot Loader is stuck at 0% and then after 2 minutes of waiting it gives me an error: S_FT_DOWNLOAD_FAIL (4008)
The SP Flash Tool Version is v5.1516 and the MTK Drivers are installed
I don't know what to do to make it work, the phone's battery is charged 99%, The Drivers are installed, i redownloaded the file with the rom and the drivers but it seems to just not work. I want to say that i don't have the Original USB Cable for the phone but i think it doesn't matter, and also i put the USB cable in other USB Ports but it still doesn't work.
Sorry for my English, i hope i will get a fix for that, Thanks in advance!
Click to expand...
Click to collapse
Is easy to fix it just open the back cover of the phone and solder a wire from gnd to kpcolo reflash the rom and then unsolder the wire is always working on a2010
Hello,
After unlocking the bootloader and installing TWRP on my OUKITEL K6000 Plus I was trying to install madOS, but unfortunately my phone went into Orange State bootloop. I could not enter fastboot anymore, and at some point even Recovery stopped to work. My phone was almost dead. I was looking for solutions but actually there was no clear guide how to revive a patient. I found that many people have similar issue so when I finally managed to resurrect my K6000 with original stock ROM I decided to share my solution.
Here's the fix:
1. Google for 'Techprolonged MediaTek MT65xx USB VCOM Drivers'. Using the guide you will find install MediaTek DA USB VCOM Port Drivers via Device Manager (step 5). Do this even if you already previously installed MediaTek USB VCOM Drivers. This is very important to install this DA version of drivers, otherwise you may have problems with uploading stock ROM via SP Flash Tool.
2. Install SP Flash Tool if you don't have it yet. You can find it easily with google.
3. Download original stock K6000 Plus ROM V6.0. You can find it easily on needrom website (NOTE: you have to create an account on needrom if you don't have it yet). Unpack it.
4. Launch SP Flash Tool, go to Options->Option... in Connection settings change USB speed to Full speed and Battery to with battery. Close Option window.
5. In SP Flash Tool go to Download tab, click on choose right next to Scatter-loading file field, navigate to the folder where you unpacked previously downloaded stock K6000 Plus ROM V6.0. Open MT6750_Android_scatter.txt file.
6. In open menu choose Download Only if it's not selected by default. All fields below should have tick enabled. I mean for 'preloader', for 'recovery', etc...
7. Unplug your phone from PC if it's connected. Shut down your phone by clicking and holding for approx 10 secs ALL THREE BUTTONS: VOL UP + VOL DOWN + POWER. If you do this properly, your phone should not self-boot into Orange State anymore.
8. In SP Flash Tool click Download icon (the one with green arrow), all the fields should become inactive.
9. Using one hand only click and hold at the same time VOL UP + POWER button.
10. Now, while you still hold these buttons, you have to connect your phone to PC (plug in micro USB cable into your phone). VERY IMPORTANT: If you have STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003) error after you connect it means you don't have DA version of MediaTek driver properly installed (step no. 1).
11. Your phone should start to flash up and you should see the progress in SP Flash Tool status bar. You can release VOL UP and POWER button now. The process may take long time, for me it was more than 1 hour. The longest part was flashing up the [system]. The good thing is you can observe the progress during whole process.
12. When flashing process is end you will see a small window with the information about completion. Now you can unplug your phone, and launch it with POWER button. You should still see the Orange State message but right after that your phone should boot up into normal mode with freshly uploaded original stock ROM. Congratulations!
Hopefully this will also fix your K6000 Plus and maybe even other models.
I'm really sorry I don't provide any direct links, but I haven't posted 10 posts yet and my XDA account is still limited.
Regards,
Slavedriver
Please help I have error 4032 (BROM ERROR S_FT_ENABLE_DRAM_FAIL)
1. Google for 'Techprolonged MediaTek MT65xx USB VCOM Drivers'. Using the guide you will find install MediaTek DA USB VCOM Port Drivers via Device Manager (step 5). Do this even if you already previously installed MediaTek USB VCOM Drivers. This is very important to install this DA version of drivers, otherwise you may have problems with uploading stock ROM via SP Flash Tool.
this should solve that
STATUS_BROM_CMD_SEND_DA_FAIL
persists even after installing correct drivers?
Solution: Choose
Download Agent as DA-PL in SP flash tools. And follow the same guide.
Thank you so much for this post, just saved an Oukitel K6000 Plus. Just finished process, rebooting normally for first use. It's been stressfull hours, what a relieve.
slavedriver83 said:
9. Using one hand only click and hold at the same time VOL UP + POWER button.
10. Now, while you still hold these buttons, you have to connect your phone to PC (plug in micro USB cable into your phone). VERY IMPORTANT: If
Click to expand...
Click to collapse
this helped me a lot with my ulefone armor 2, thanks
Fixed the orange state, thanks a lot for this guide.
Do you think I shall try again to upgrade to Android 8 anymore?
slavedriver83 said:
9. Using one hand only click and hold at the same time VOL UP + POWER button.
Click to expand...
Click to collapse
Thank you very much for the advice
I thought I put my phone in the trash when I read this.
But in point 9 I had to push only the VOL UP if I press the two buttons, the AP returns an error.
You saved mine as well, slavedriver!
And it is a Teclast Tpad A10S!
I had given it up.
Thanks a lot!
It works also on U20 plus. I had to select DA_SWSEC as Download Agent. Thank you so much!
Guide worked Perfectly for me.
My mobile was bricked in the same Bootloop. The guide worked perfectly for me. Thanks a lot for useful and detailed help.
I understand this thread is almost 1 year old. I tried this procedure and everything went well. The only problem the phone does not boot. It does turn on but nothing comes up. No boot menu no logo just a few flickering lights and a very dark background. Does anyone have any ideas?
OK6000 Plus
pvkid said:
I understand this thread is almost 1 year old. I tried this procedure and everything went well. The only problem the phone does not boot. It does turn on but nothing comes up. No boot menu no logo just a few flickering lights and a very dark background. Does anyone have any ideas?
OK6000 Plus
Click to expand...
Click to collapse
Tried this guide but SP shows the following messagge "STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060005) " (so it doesn't end with 3 but with 5)
Pyandroid said:
1. Google for 'Techprolonged MediaTek MT65xx USB VCOM Drivers'. Using the guide you will find install MediaTek DA USB VCOM Port Drivers via Device Manager (step 5). Do this even if you already previously installed MediaTek USB VCOM Drivers. This is very important to install this DA version of drivers, otherwise you may have problems with uploading stock ROM via SP Flash Tool.
this should solve that
Click to expand...
Click to collapse
Bro I got a different error just looks like:
ERROR STATUS_SEC_AUTH_FILE_NEEDED (0xc0030012)
Please help me out...I use "tecno spark 4 kc2"
slavedriver83 said:
Hello,
After unlocking the bootloader and installing TWRP on my OUKITEL K6000 Plus I was trying to install madOS, but unfortunately my phone went into Orange State bootloop. I could not enter fastboot anymore, and at some point even Recovery stopped to work. My phone was almost dead. I was looking for solutions but actually there was no clear guide how to revive a patient. I found that many people have similar issue so when I finally managed to resurrect my K6000 with original stock ROM I decided to share my solution.
Here's the fix:
1. Google for 'Techprolonged MediaTek MT65xx USB VCOM Drivers'. Using the guide you will find install MediaTek DA USB VCOM Port Drivers via Device Manager (step 5). Do this even if you already previously installed MediaTek USB VCOM Drivers. This is very important to install this DA version of drivers, otherwise you may have problems with uploading stock ROM via SP Flash Tool.
2. Install SP Flash Tool if you don't have it yet. You can find it easily with google.
3. Download original stock K6000 Plus ROM V6.0. You can find it easily on needrom website (NOTE: you have to create an account on needrom if you don't have it yet). Unpack it.
4. Launch SP Flash Tool, go to Options->Option... in Connection settings change USB speed to Full speed and Battery to with battery. Close Option window.
5. In SP Flash Tool go to Download tab, click on choose right next to Scatter-loading file field, navigate to the folder where you unpacked previously downloaded stock K6000 Plus ROM V6.0. Open MT6750_Android_scatter.txt file.
6. In open menu choose Download Only if it's not selected by default. All fields below should have tick enabled. I mean for 'preloader', for 'recovery', etc...
7. Unplug your phone from PC if it's connected. Shut down your phone by clicking and holding for approx 10 secs ALL THREE BUTTONS: VOL UP + VOL DOWN + POWER. If you do this properly, your phone should not self-boot into Orange State anymore.
8. In SP Flash Tool click Download icon (the one with green arrow), all the fields should become inactive.
9. Using one hand only click and hold at the same time VOL UP + POWER button.
10. Now, while you still hold these buttons, you have to connect your phone to PC (plug in micro USB cable into your phone). VERY IMPORTANT: If you have STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003) error after you connect it means you don't have DA version of MediaTek driver properly installed (step no. 1).
11. Your phone should start to flash up and you should see the progress in SP Flash Tool status bar. You can release VOL UP and POWER button now. The process may take long time, for me it was more than 1 hour. The longest part was flashing up the [system]. The good thing is you can observe the progress during whole process.
12. When flashing process is end you will see a small window with the information about completion. Now you can unplug your phone, and launch it with POWER button. You should still see the Orange State message but right after that your phone should boot up into normal mode with freshly uploaded original stock ROM. Congratulations!
Hopefully this will also fix your K6000 Plus and maybe even other models.
I'm really sorry I don't provide any direct links, but I haven't posted 10 posts yet and my XDA account is still limited.
Regards,
Slavedriver
Click to expand...
Click to collapse
Solution?
for:
ERROR STATUS_SEC_AUTH_FILE_NEEDED (0xc0030012)
"Tecno spark 4 kc2"
slavedriver83 said:
Hello,
After unlocking the bootloader and installing TWRP on my OUKITEL K6000 Plus I was trying to install madOS, but unfortunately my phone went into Orange State bootloop. I could not enter fastboot anymore, and at some point even Recovery stopped to work. My phone was almost dead. I was looking for solutions but actually there was no clear guide how to revive a patient. I found that many people have similar issue so when I finally managed to resurrect my K6000 with original stock ROM I decided to share my solution.
Here's the fix:
1. Google for 'Techprolonged MediaTek MT65xx USB VCOM Drivers'. Using the guide you will find install MediaTek DA USB VCOM Port Drivers via Device Manager (step 5). Do this even if you already previously installed MediaTek USB VCOM Drivers. This is very important to install this DA version of drivers, otherwise you may have problems with uploading stock ROM via SP Flash Tool.
2. Install SP Flash Tool if you don't have it yet. You can find it easily with google.
3. Download original stock K6000 Plus ROM V6.0. You can find it easily on needrom website (NOTE: you have to create an account on needrom if you don't have it yet). Unpack it.
4. Launch SP Flash Tool, go to Options->Option... in Connection settings change USB speed to Full speed and Battery to with battery. Close Option window.
5. In SP Flash Tool go to Download tab, click on choose right next to Scatter-loading file field, navigate to the folder where you unpacked previously downloaded stock K6000 Plus ROM V6.0. Open MT6750_Android_scatter.txt file.
6. In open menu choose Download Only if it's not selected by default. All fields below should have tick enabled. I mean for 'preloader', for 'recovery', etc...
7. Unplug your phone from PC if it's connected. Shut down your phone by clicking and holding for approx 10 secs ALL THREE BUTTONS: VOL UP + VOL DOWN + POWER. If you do this properly, your phone should not self-boot into Orange State anymore.
8. In SP Flash Tool click Download icon (the one with green arrow), all the fields should become inactive.
9. Using one hand only click and hold at the same time VOL UP + POWER button.
10. Now, while you still hold these buttons, you have to connect your phone to PC (plug in micro USB cable into your phone). VERY IMPORTANT: If you have STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003) error after you connect it means you don't have DA version of MediaTek driver properly installed (step no. 1).
11. Your phone should start to flash up and you should see the progress in SP Flash Tool status bar. You can release VOL UP and POWER button now. The process may take long time, for me it was more than 1 hour. The longest part was flashing up the [system]. The good thing is you can observe the progress during whole process.
12. When flashing process is end you will see a small window with the information about completion. Now you can unplug your phone, and launch it with POWER button. You should still see the Orange State message but right after that your phone should boot up into normal mode with freshly uploaded original stock ROM. Congratulations!
Hopefully this will also fix your K6000 Plus and maybe even other models.
I'm really sorry I don't provide any direct links, but I haven't posted 10 posts yet and my XDA account is still limited.
Regards,
Slavedriver
Click to expand...
Click to collapse
Hi, do I need my phone to be rooted to do this.
I unlocked bootloader in my gionee f205 from fastboot and now it is in orange state bootloop.
I haven't rooted my phone before doing it.