I decided I wanted to change the firmware .. I did not do this for the first time so I downloaded the beta Accura SAMBA v2, with ciekowości with UPK.zip. I plugged the phone to upload ZIPA the card and started | drinking heavy digging in UPK.zip CWM.exe shoved and there, not knowing that he will immediately do something. It turned out that he started flashign - now like a brick phone detects omap4430 but after installing the drivers in Device Manager / Ports LG CDMA, there is no serial ports and LGflash Tool does not detect my phone. The system is win xp. Could only service?
(google translate)
did you try putting it in download mode take the battery out hold volume down and power i think then plug the usb in keep holding buttons tell the phone vibrates or device manager finds it.
Which OS are u using(Windows 7 or XP). I bricked the phone multiple times trying to install the wrong CWM onto the phone as the latest version of rom manager did not have the O3D as an option. I tried to recover in Windows 7 and couldn't. Had to be done in Windows XP.
If it is still bricked, let me know and i will forward a link to the recovery page to get the phone back up and running.
Kavir
Prior to obtaining answers the phone sent the unit if the warranty does not include a guarante (phone rooted) back to the topic.
(google translate)
Related
hey everyone yesterday i found out that pantech released an important update for the crossover... it is the Gingerbread update . follow these steps to update your phone...
1. download the updating tool from pantech's website.
2.Run the zip file and follow the instructions...
(HINT:your phone will go into S/W upgrading mode when you plug it in to the computer that's normal just follow the prompts and enjoy )
Root Your Pantech Crossover [P8000] (GingerBread 2.3.6)
Root Your Pantech Crossover [P8000] (GingerBread 2.3.6)
http://forum.xda-developers.com/showthread.php?p=26635332
enquiry
pawaa said:
Root Your Pantech Crossover [P8000] (GingerBread 2.3.6)
http://forum.xda-developers.com/showthread.php?p=26635332
Click to expand...
Click to collapse
do you know how to flash custom rom in pantech p8000.?
Gingerbread update - connection problems
Hey guys, I'm new here and just figured out there's an update for my phone (gingerbread)... Anyways, I've attempted to update my phone, but I've run into a problem. I've been following the steps here from AT&T's website /esupport/article.jsp?sid=KB413936&cv=821#fbid=OhFxMmC2FtH, but I'll lay out what I've been doing for you here, just to make sure I've been doing it right.
1. Install Pantech Upgrade tool on my PC (Windows 8.1 x64)
2. Remove and re-install battery on my phone (not connected to computer at this point so it turns off)
3. Hold down "volume up," "home," and "power buttons to enter "S/W Upgrading" mode
4. Start Pantech Upgrade tool on the computer
5. Connect phone to computer via micro-usb
6. Attempt to connect phone...
#6 is where I have troubles. I believe I've followed all the requisite steps to set the phone up in the right mode, but for some reason the computer won't recognize the device. I've waited 2-3 minutes while plugged in (and set up) and re-tried the connection, but to no avail. I've reset the phone to factory (backed it up first of course) but that didn't seem to help either. Restarting the computer did nothing.
What should I do? Thanks ahead of time
drivers
Hailcanadien said:
Hey guys, I'm new here and just figured out there's an update for my phone (gingerbread)... Anyways, I've attempted to update my phone, but I've run into a problem. I've been following the steps here from AT&T's website /esupport/article.jsp?sid=KB413936&cv=821#fbid=OhFxMmC2FtH, but I'll lay out what I've been doing for you here, just to make sure I've been doing it right.
1. Install Pantech Upgrade tool on my PC (Windows 8.1 x64)
2. Remove and re-install battery on my phone (not connected to computer at this point so it turns off)
3. Hold down "volume up," "home," and "power buttons to enter "S/W Upgrading" mode
4. Start Pantech Upgrade tool on the computer
5. Connect phone to computer via micro-usb
6. Attempt to connect phone...
#6 is where I have troubles. I believe I've followed all the requisite steps to set the phone up in the right mode, but for some reason the computer won't recognize the device. I've waited 2-3 minutes while plugged in (and set up) and re-tried the connection, but to no avail. I've reset the phone to factory (backed it up first of course) but that didn't seem to help either. Restarting the computer did nothing.
What should I do? Thanks ahead of time
Click to expand...
Click to collapse
install pantech pc suite, only need install drivers
Hi I got a problem with my phone. after years of struggling wanting to upgrade it I finally could but deeply regret it. it seems the google play services are so bloated that they take over half the available storage space, not to mention the play store doesn't work (white screen) after it upgrades.
so my question is, is there any way to either downgrade the OS back or prevent the play services and store from upgrading? the defaults seem to work just fine. I dont care about using google's upgraded apps.
alternatively fixing the new play store white screen. I can only get it back to work if I uninstall the upgrades.
ok i need help please , i had gbread on it and installed superoneclick to get root then tried to flash cwm with vipermod. message said out of storage space or something (dont have ext mem only internal)and now phone will not turn on.
have followed this guide http://forum.xda-developers.com/showthread.php?t=1244490 and phone was recognised by omapp but couldnt change the port in device manager and couldnt find a bin to download so i tried to flash a kdz v21a
clicked start on lgflasher but nothing happened so after about 5 mins i cancelled it thinking without the port change it was a waste of time.
now i cant even get omapp to flash up when i connect phone . device manager refreshes but i cant see anything change .
hope thats enough info for some kind person to help.
many thanks in advance
marty
Try this start on step 3 its in the thrill forum but they are the same phone http://forum.xda-developers.com/showthread.php?t=1491870
sent from my acidhazard thrill
marty41 said:
...then tried to flash cwm with vipermod...
marty
Click to expand...
Click to collapse
Where did you get vipermod from? The Transformer Prime forums? That's meant for the TFP and would not have worked with the O3D since it flashes to mmcblk0p4 rather than mmcblk0p. You should have used the flasher here.
Download this, this and this. Extract smartflash.zip, install both driver packages. Then, run Windows Enabler, in the notifications bar, click it and make sure it is set to 'on'.
Now remove your phone's battery and sim card, press volume up and connect your phone to the computer. Hold volume up until it is detected by the computer. It should take no longer than 20 seconds.
Now run B_SmartFlashTool_Extern.exe, go to rom copy d/l, select LGP920_CP.fls for CP bin and LGP920_AP.bin for AP bin. Make sure under communications setup that your phone is connected (verify the com port in device manager) and then click start. If all goes well, you'll have a stock v21D phone again
Thanks for the help guys but i'm not getting a com port when i connect the phone so i don't think i can use any of those methods . or can i
i want to go back to the beginning and see if omapp will detect phone and install drivers but i can uninstall the installer but dont think that will remove the drivers , does anyone know how to do that.(cos i think i messed that bit up )
thanks again
marty
vipermod , i think i followed a link somewhere in the o3d forum where someone said u could use it to flash cwm
so , i uninstalled all lg drivers uninstalled omap installer searched registry for for any mention of omap and deleted (some wouldnt delete ) .
restarted computer (xp by the way )
then installed omap installer and lg drivers and connected phone holding vol up
and................. NOTHING whereas yesterday i had a little icon in the task bar and the opportunity to install omap drivers.
conclusion , phone is dead , i had an oppurtunity to fix it yesterday and i blew it
hope someone tells me i'm wrong but its not looking good
marty
take off battery and just put your usb cable and tell us if it shows omap in your device manager
dont press keys
if i connect phone without battery device manager just refreshes a couple of times but nothing changes with regards to ports doesn't matter if i have vol+ button in power button in or nothing
thanks anyway
marty
am i getting somewhere
update : ok so i'm on a clean install of xp and i connected the phone with vol+ and it wants to install omap4430 drivers. is that good news?
i installed omapinstaller , then the 2 lg drivers ca and ma , then reconnected the phone and went thro omap driver install but still don't have any ports in device manager
is there no way i can force it to flash without it having to think it is connected cause if its recognising it as omap4430 there must be something there
don't want to give up on it too easy , if only i put this much effort into it whilst it was working lol
marty
evening all . new update
tonight i've installed the lg support tool and drivers and found that if i leave my phone connected i occasionally get "TI sample boards" popping up in device manager for a couple of seconds without having to press buttons , unfortunately it doesn't stay on for any longer with buttons pressed.
i was wondering how to force install the "LG CDMA composite usb device " drivers cos its never asking for them as it should according to the tutorial
hope someone can help cos i've seen a few threads with same problem as me
marty
I've looked at the similar threads , to be honest even if one of the suggestions might work , none of the people seem to have the same problem from my understanding.
So apologize ahead of time as i imagine someone has bricked in a similar fashion in some thread buried somewhere.
But have an unlocked P925g lg optimus 3d, got a few days ago.
Last night i rooted just fine , root checker says it was rooted properly.
Then i installed rom manager as i was following manbearpigs post.
When i got to flash clockwork mod , i clicked the button and it looked like it was doing some flashing , but the phone turned off to reboot??
and now when i power on the lg logo appears and then the screen goes funny.
If i try to hold the power down and 3d button , i get a green screen . However i'm very unsure of what to do next.
However when i plug into usb the phone goes black , refuses to turn back on until i take the battery out.
I'd pay someone here if i could , but i'll take any help i can get.
Appreciate any help.
I don't KNOW, but just an idea:
May be your phone is stuck in download mode?
With this latest ICS (original, not ported) my phone shows black screen when in download mode (no message SW UPDATE and something in Korean).
Did you try to plug your phone to PC? Does your comp see it?
From what I read flashing wrong CWM might cause problems...
Also try to read Ressurection thread by xbsa, it helped me couple times
Don't give up!
Sent from my LG-P920 using xda app-developers app
My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.
odanhammer said:
My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.
Click to expand...
Click to collapse
just try the LG flash tool to flash without reinstalling drivers, if it doesn't flash you have to uninstall all LG drivers, reboot your computer, install again LG drivers and flash Bin files using Flash tool, you don't have to flash Bin and fls files at the same time, first Bin file, if there is no network close LG flash, open it again and flash Fls at second time to get the right baseband (sometimes it not necessery to flash this fls files)
or just follow this guide
http://www.technopat.net/forum/android-telefonlari/9128-lg-optimus-3d-ultimate-flash-guide.html
odanhammer said:
My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.
Click to expand...
Click to collapse
To get to download mode you need to keep battery in, remove sim and SD card. Hold vol+ and plug USB cable. You should see message SW UPDATE and some Korean. My phone now doesn't show it, just blank screen. But LG Flash sees it and u can flash bin fls.
Sent from my LG-P920 using xda app-developers app
Remove drivers and use the LGMobile Support Tool to install the drivers, if your phone is connected it should detect it and finish the install process. I believe the P925G is a Rogers device? You might have to select Rogers as your carrier to find the drivers.
Android1993 said:
Remove drivers and use the LGMobile Support Tool to install the drivers, if your phone is connected it should detect it and finish the install process. I believe the P925G is a Rogers device? You might have to select Rogers as your carrier to find the drivers.
Click to expand...
Click to collapse
ok so i've deleted all lg related material from my computer, when i connected the phone to the computer with battery in , nothing happens.
Without battery , it detects automatically , then it continues a loop of picking it up and dropping off .
So i moved to my laptop , attempted to follow the guide kupuku posted, however after getting the went logo on the phone , it never gets past that stage no matter what i do.
I've also tried LG support tool , it doesn't detect my phone on either my computer or laptop , even after installing/reinstalling the proper drivers.
LG does have a live chat which isn't open and the phone number can not be reached from my area.. i imagine its a 1800 number for asia or something as i do live in Canada.
My only other choice is to take the phone down to a guy that can get it out of boot loop for close to what i paided for the phone a few days ago.
Least to say , that option is something i want to do , nor can i afford to do.
once again i apprecaite the help that has been given , and for any that will be given.
edit:
Ok so i got lg mobile support to work by doing recovery and entering my imei number. Its currently at 4% but its been close to an hour and a half. Might restart and see if that works , but my phone is doing the logo boot repeat pattern still , even during this update. so not sure what exactly is happening.
hello,
I hope someone can help me with my AT&T LG Optimus Pro G phone, which I have royally screwed up.
I was experimenting with the cyogen mod and after installation I installed the freegee app and once the cwm recovery was installed, I decided to go into the recovery by holding down up volume and power button.
Once I was in recovery for CWM i couldn't exit out, and the phone constantly booted into recovery after every reboot, even if i took out the battery, and powered it on.
I tried reflashing the cynogen mod through the sd card, and even though I would get success message the phone would still reboot into the cwm recovery.
I started doing research on the internet and i found file exitrecovery.zip that could be used to possibly get the phone out of the cwm recovery.
After installing exitrecovery.zip, I rebooted the phone, and now I have complete black screen. There are no light, no hints the phone is even turning on, and I can't get into recovery( or at least I can't tell). The only thing now is that when i connect the phone to the computer the window tries to install drivers for the device, and eventually prompts to insert a CD for LG drivers. I already have LGUnitedMobileDriver v.3.10.1 connection drivers installed from their website.
Please help, I am really stuck here..... and have no clue what to do. I am fairly new with rooting and modding, and I am extremely miserable.
The phone is still under warranty from LG. Anyone if all else fails, and since the phone has no screen or lights, whether they would replace it?
Attaching the exitrecovery.zip that I used.
sobbing....
babaghanush said:
hello,
I hope someone can help me with my AT&T LG Optimus Pro G phone, which I have royally screwed up.
I was experimenting with the cyogen mod and after installation I installed the freegee app and once the cwm recovery was installed, I decided to go into the recovery by holding down up volume and power button.
Once I was in recovery for CWM i couldn't exit out, and the phone constantly booted into recovery after every reboot, even if i took out the battery, and powered it on.
I tried reflashing the cynogen mod through the sd card, and even though I would get success message the phone would still reboot into the cwm recovery.
I started doing research on the internet and i found file exitrecovery.zip that could be used to possibly get the phone out of the cwm recovery.
After installing exitrecovery.zip, I rebooted the phone, and now I have complete black screen. There are no light, no hints the phone is even turning on, and I can't get into recovery( or at least I can't tell). The only thing now is that when i connect the phone to the computer the window tries to install drivers for the device, and eventually prompts to insert a CD for LG drivers. I already have LGUnitedMobileDriver v.3.10.1 connection drivers installed from their website.
Please help, I am really stuck here..... and have no clue what to do. I am fairly new with rooting and modding, and I am extremely miserable.
The phone is still under warranty from LG. Anyone if all else fails, and since the phone has no screen or lights, whether they would replace it?
Attaching the exitrecovery.zip that I used.
sobbing....
Click to expand...
Click to collapse
Find flow ROM with expansion .exe and try it to sew from a computer.
could you further elaborate please
lykosha said:
Find flow ROM with expansion .exe and try it to sew from a computer.
Click to expand...
Click to collapse
hi, thanks for your reply. Again I very much new to the rooting and android OS tinkering, and nowhere close to an experienced user.
I tried to use google with your information in regards to how to use flow ROM with expansion.exe, but did not get any leads.
I would appreciate if you could elaborate more on this process.
When my phone is connect to the computer via usb is is constantly trying to install drivers. I had already installed LG usb connection drivers in the past and it was successful. It almost seems it tries to install driver yet fails after receiving no input from the phone, and then request LG CD with drivers.
babaghanush said:
hi, thanks for your reply. Again I very much new to the rooting and android OS tinkering, and nowhere close to an experienced user.
I tried to use google with your information in regards to how to use flow ROM with expansion.exe, but did not get any leads.
I would appreciate if you could elaborate more on this process.
When my phone is connect to the computer via usb is is constantly trying to install drivers. I had already installed LG usb connection drivers in the past and it was successful. It almost seems it tries to install driver yet fails after receiving no input from the phone, and then request LG CD with drivers.
Click to expand...
Click to collapse
Try to find driver on the web-site of producer. Set them. Overload a vehicle in Bootloader. In the controller of devices on компе must be determined your device. Then on a computer start sewing - .EXE.
Did you get this problem resolved? I have the exact problem with the exact phone!!!
thank you very much
Hello. I have big problem-
I had the TWRP om my phone with custom rom and all worked fine.
Today i wanted to get my phone back as original so i downloaded original rom.
Started SP flashtools and used android scatter file from original android rom. Everything was fine till the end of downloading (it took like 10 mins! when i got some error : S_DL_GET_DRAM_SETTING_FAIL (5054)
I tried to to the steps again, start SP flashtools, press to download, plug the cable. Heard the sound of connected USB (cable) but immediatelly i hear the disconnect of the cable with phont and i got message:
BROM ERROR: S_FT_DA_NO_RESPONSE (4001)
DA didnt responsne data to flashtools
And now i can not do nothing. When i check device manager, i see USB serial device only. No mtk, no mediatek. I tried some ways how to install the driver but idk. i am failing. I am retard oh god...
Still, i heard that there is still the way to make this phone work because it is mediatek based.
Can you guys please help me?
I am using Windows 10 but i also can use Zorin OS Linux. Windows is default.
Good damn guys i was so sad but i managed to fix the thingy and now my phone is working back again.
As most of ppl what i was able to read so far, had the problem with recognizing phone without battery. PC was not able to recognize it as Mediatek, just some random serial device. Nothing really worked and i was about to ....nvm
But what i tried is, to do NOT remove the battery. I pressed the VOLUME UP button, while i hold it and while battery was inside i started flash tool. Pressed download an dthen while i was holding the button volume UP and with battery in, it suddently was able to find the device and it flashed my phone.
Oh deear i am so happy . Maybe this will help to someone so back again
If your device is not recognized as MEDIATEK device and you need to use SP Flash Tools to flash the ROM, use the following
Remove SIM cards, SD Card
Leave battery in phone
Run sp flash tools and set your settings as you need (load scatter file from your unpacked rom)
Press the download button in SP FLash Tools
Now, still do not remove battery. Press the Volume UP button and hold it
Plug in the USB cable into PC and into Phone while you still holding the volume button
Release the volume button right in moment, when your device is plugged in and found by system (YOu hear the connected sound).
Now i believe, everything works and its flashing your phone
If not. so i was lucky as f....
Great
Thanks, this is great.