I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
I am not able to post image. Help me. I don't have 10 post count yet.
nik_123 said:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
Click to expand...
Click to collapse
So, you cannot get into flashmode or fastboot? Power off your phone, hold volume up and plug it into your pc without hitting the power button. Do you get any blue led or quick led flash at all? I'm not sure about your device's condition but I can surely try getting you files from my phone.
Try installing flashtool and see if flashtool recognizes your phone at all.
Agent_fabulous said:
So, you cannot get into flashmode or fastboot? Power off your phone, hold volume up and plug it into your pc without hitting the power button. Do you get any blue led or quick led flash at all? I'm not sure about your device's condition but I can surely try getting you files from my phone.
Try installing flashtool and see if flashtool recognizes your phone at all.
Click to expand...
Click to collapse
Only red LED glows while I plug it in PC. Flashtool can not recognize. EMMC tool recognize but can't find/download the files.
I am pretty sure once I get the tool running it will bring back my phone alive.
nik_123 said:
Only red LED glows while I plug it in PC. Flashtool can not recognize. EMMC tool recognize but can't find/download the files.
I am pretty sure once I get the tool running it will bring back my phone alive.
Click to expand...
Click to collapse
Hmm, can QPST find your phone? I'm trying to get a QPST/QCN backup which could be helpful. However, fastboot, flashmode, recovery or device running, I get ports empty. Can anyone help me out here? I can try draining my battery so I have the little phase of the dull red led where the device won't power on until it's a little charged.
Agent_fabulous said:
Hmm, can QPST find your phone? I'm trying to get a QPST/QCN backup which could be helpful. However, fastboot, flashmode, recovery or device running, I get ports empty. Can anyone help me out here? I can try draining my battery so I have the little phase of the dull red led where the device won't power on until it's a little charged.
Click to expand...
Click to collapse
I guess yes, but I don't remember exactly. Switch off your phone and connect may be it should detect.
nik_123 said:
I guess yes, but I don't remember exactly. Switch off your phone and connect may be it should detect.
Click to expand...
Click to collapse
Tried that but it ends up turning on and goes to the charging animation. (Which is after the Sony Logo.) Waiting for my phone to drain
nik_123 said:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
Click to expand...
Click to collapse
Jesus Christ, you installed a ROM without unlocking the bootloader first?... yare yare daze...
stuckbootloader said:
Jesus Christ, you installed a ROM without unlocking the bootloader first?... yare yare daze...
Click to expand...
Click to collapse
I unlocked it but the ROM zip was not flashing through TWRP. After 2-3 tries my phone went full dead. If you can help it will be great.
nik_123 said:
I unlocked it but the ROM zip was not flashing through TWRP. After 2-3 tries my phone went full dead. If you can help it will be great.
Click to expand...
Click to collapse
I'm afraid I can't...
Agent_fabulous said:
Tried that but it ends up turning on and goes to the charging animation. (Which is after the Sony Logo.) Waiting for my phone to drain
Click to expand...
Click to collapse
eh... if your device is showing loading anymation this means charger is loaded.... so no you dont have a hardbrick... try to reach fastbootmode over and over again
Sent from my Xperia T using XDA Free mobile app
SdtBarbarossa said:
eh... if your device is showing loading anymation this means charger is loaded.... so no you dont have a hardbrick... try to reach fastbootmode over and over again
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
My phone is working fine. However, I've no idea how to get a QPST/QCN Backup (which I guess could) help out @nik_123
Agent_fabulous said:
My phone is working fine. However, I've no idea how to get a QPST/QCN Backup (which I guess could) help out @nik_123
Click to expand...
Click to collapse
nope... even if we have a snapdragon... since this is a semcflash device a backup is useless...
Sent from my Xperia T using XDA Free mobile app
Hello sir,
I had the same problem a month ago and I fixed my bricked Xperia L.
Just go to this thread and follow the steps ^^
http://forum.xda-developers.com/showthread.php?t=2695344
The thread says u need to download WMSHUA, but its in chinese language. If you don't know what it means just reply to this and i will translate it.
Good luck!
If it didn't worked, or u need help reply.
Related
I tried this mod
http://forum.xda-developers.com/showpost.php?p=45573975&postcount=30
Everything was successful but to my mistake I formatted the 4GB(Original internal) and now I can't mount it so I restarted the phone and now the phone is in this state/ Please guys I need help
Did you try formating the original 4Gb inside CWM ?
damian01211 said:
Did you try formating the original 4Gb inside CWM ?
Click to expand...
Click to collapse
I dont have CWM. The phone doesn't turn either
Even into fastboot ? Try putting phone into flashboot, flash a kernel that have a cwm in and try formating.
damian01211 said:
Even into fastboot ? Try putting phone into flashboot, flash a kernel that have a cwm in and try formating.
Click to expand...
Click to collapse
bootloader is still locked as of now. But there is no response in either volume up or volume down
It's look like that is a hard brick ;/, maybe some one come up with something to fix but I'm out. For me it's look like a hard brick.
oh my do you think if I brought it to service center, they will detect that I have rooted the phone and had vold.fstab changed?
Don't think so, as the phone doesn't turn even respond to any thing. They might change the motherboard. Just try saying to them that this happend when during charing. You just left phone for the night to charge and on the morning phone was out. But are you sure that SUS doesn't recognise the phone ? If they do not belive you might pay for the motherboard.
I Have unlocked bootloader on xperia l. The mobile is hardbirck and sent to the service of sony. You have a problem with the repair because unlock the bootloader?I bought it 25 days ago.
damian01211 said:
Don't think so, as the phone doesn't turn even respond to any thing. They might change the motherboard. Just try saying to them that this happend when during charing. You just left phone for the night to charge and on the morning phone was out. But are you sure that SUS doesn't recognise the phone ? If they do not belive you might pay for the motherboard.
Click to expand...
Click to collapse
Flashtool doesn't recognize the phone, no device appears in device manager after plugging the phone while holding down volume - button
The phone was not unlocked. I just tried swapping internal with external
Finally the phone has been changed the same day. It has been replaced with a new one because sony can't see why
Do you think I won't have problem that I unlocked the bootloader and sent to the repair service (Reason Hardbrick)? I just told them that closed and did not open and wait for reply in 10 days. The mobile I have one month...
amnher said:
I tried this mod
http://forum.xda-developers.com/showpost.php?p=45573975&postcount=30
Everything was successful but to my mistake I formatted the 4GB(Original internal) and now I can't mount it so I restarted the phone and now the phone is in this state/ Please guys I need help
Click to expand...
Click to collapse
i have the same problem & i don't have warranty anymore
my device is detected as QUALCOMM QLOADER and the only program recognize it is QPST but the problem is that it requires files i can't find online
such as :
-flash programmer file name
-boot image
-load xml def
-load patch def
or simply a QCN Dump file instead of all this
any help would be appreciated ... thanks in advance :good:
francois90 said:
i have the same problem & i don't have warranty anymore
my device is detected as QUALCOMM QLOADER and the only program recognize it is QPST but the problem is that it requires files i can't find online
such as :
-flash programmer file name
-boot image
-load xml def
-load patch def
or simply a QCN Dump file instead of all this
any help would be appreciated ... thanks in advance :good:
Click to expand...
Click to collapse
read this...http://forum.xda-developers.com/show...t=1468791.... ..u can PM him...hope this helps....
mohit378 said:
read this...http://forum.xda-developers.com/show...t=1468791.... ..u can PM him...hope this helps....
Click to expand...
Click to collapse
thanks man but Invalid Forum specified. This can happen for a variety of reasons-- most likely because the thread or post you are trying to view has been moved or deleted. Please return to the forum home and browse for another similiar post.
http://forum.xda-developers.com/showthread.php?t=1468791
try this..
amnher said:
Finally the phone has been changed the same day. It has been replaced with a new one because sony can't see why
Click to expand...
Click to collapse
you are lucky
Phone Replaced
amnher said:
Finally the phone has been changed the same day. It has been replaced with a new one because sony can't see why
Click to expand...
Click to collapse
What did you told them? Im having the same problem!
Maxissc said:
What did you told them? Im having the same problem!
Click to expand...
Click to collapse
I just told them it suddenly died
Sent from my C2105 using xda app-developers app
phone wont turn on
i rooted my xperia l using VROOT after that i installed this http://forum.xda-developers.com/showthread.php?t=2598697
now my phone wont start, its stuck on black screen
Kindly Help me,
I was Flashing my Z3 by Flash Tool , i accidently select D6646 ftf file instead *of D6616 ftf , during flashing Flash Tool gives error at Kernal.sin and Phone goes Down,
No Soft or Hard Reset Work,
NO Flashmood / Fastboot Mood work ,
Flash Tool only Show
'Device connected with USB debugging off
19/021/2017 07:21:01 - INFO *- For 2011 devices line, be sure you are not in MTP mode
and Device Manager Shows SOMC Flash Drive,
When Connect By press Vol Down button and Attach USB Cable, USB not Recognized Error Shows*on Windows 7
I have TA backup from Flash Tool ( ie T1 and T2 ) before flashing in case of Partition break, where as
I realize its kernel brokeup
Kindly Plese Guide me what can I do to live my phone back
are you sure fastboot mode doesnt work? just power off and press vol+ and power if led is blue then you are is fastboot mode. then try to flash kernel.sin in adb command with pc . cheers
Yes sir sureonly red led show just for 2 3 sec n then goes off flash tool shows debugging mode off .. i disconnect battery to completly shut off phone after that i connect n same probelm
https://forum.xda-developers.com/showthread.php?t=2646405
xkeita said:
https://forum.xda-developers.com/showthread.php?t=2646405
Click to expand...
Click to collapse
ihad used that trick after whole day research , I can conclude S1tools does not support 2012 upgrade model, I received error as ID HASH IS NOT SUPPORTED,
however my bootloder is unlocked, and I hav unlocked code also, and also phone is rooted ,
Yes this could work for us as we still doesn't have the preloader dump.
AFAIK there is not unbricking way for now.
Somewhere I read that pc companion could work with Q9008. Also worth to try with emma.
I want working on this to finalize the unbricking guide but will not be soon as I need my device for the rom port. When done I will work on this unbricking.
Also it is not a kernel problem. Your flash replaced s1 bootloader with a wrong one.
Good luck a be patient
What about this: https://forum.xda-developers.com/showthread.php?t=1849170 ?
nailyk said:
Yes this could work for us as we still doesn't have the preloader dump.
AFAIK there is not unbricking way for now.
Somewhere I read that pc companion could work with Q9008. Also worth to try with emma.
I want working on this to finalize the unbricking guide but will not be soon as I need my device for the rom port. When done I will work on this unbricking.
Also it is not a kernel problem. Your flash replaced s1 bootloader with a wrong one.
Good luck a be patient
What about this: https://forum.xda-developers.com/showthread.php?t=1849170 ?
Click to expand...
Click to collapse
Thankq sir, for your reply so if its s1 bootloader then is it possible to bring my phone again live will u guide me what the next thing should i do
talharais said:
Thankq sir, for your reply so if its s1 bootloader then is it possible to bring my phone again live will u guide me what the next thing should i do
Click to expand...
Click to collapse
Sorry for confusing :s
I think, today, there is no way.
You can try with the official emma flash tool or pc companion but I really doubt.
nailyk said:
Sorry for confusing :s
I think, today, there is no way.
You can try with the official emma flash tool or pc companion but I really doubt.
Click to expand...
Click to collapse
Ohhh , sir i have TA backup still cant do anything and also charging also doesnot solve problem as mention in one of the xda thread
https://forum.xda-developers.com/showthread.php?t=1849170&page=1
talharais said:
Ohhh , sir i have TA backup still cant do anything and also charging also doesnot solve problem as mention in one of the xda thread
https://forum.xda-developers.com/showthread.php?t=1849170&page=1
Click to expand...
Click to collapse
Not related with TA backup for now. You change your bootloader with a wrong one.
It is almost like if you flash the wrong bios on your mother board. You can't flash it again until someone find an 'electronic' way.
Give a try with pc companion or emma.
nailyk said:
Not related with TA backup for now. You change your bootloader with a wrong one.
It is almost like if you flash the wrong bios on your mother board. You can't flash it again until someone find an 'electronic' way.
Give a try with pc companion or emma.
Click to expand...
Click to collapse
Pc companion is not reconize the fevice actually i explain what i idid,
I was flashing d6616 by flash tool
Firstly i unlock bootloder by sony , through unlock code they email then i rooted the device by kingo root n then flash accidently i chosse d6646 rom instead of d6616 rom then during flashing flashtool gives error at kernal.sin and after that device goesoff
When i plug into the pc it reconize my device as SOMC Flash device andflash tool gives dubugging off
Thats was the whole senrio by which my device brick so after whole story i really disappointed to know that my device is just use for paper weight... :crying:
I downloaded the emma after install it desnot show any usb device
You own a d6616? It have unlockable bootloader :s
Send it to repair center. No other choice.
And yes it is confusing, it say bootloader unlock after the fastboot command but it is not true.
@blackhawk_LA made some posts about D6616. Maybe he could help you.
I just post here to announce you the bad new your device is hardly softbricked.
nailyk said:
You own a d6616? It have unlockable bootloader :s
Send it to repair center. No other choice.
And yes it is confusing, it say bootloader unlock after the fastboot command but it is not true.
@blackhawk_LA made some posts about D6616. Maybe he could help you.
I just post here to announce you the bad new your device is hardly softbricked.
Click to expand...
Click to collapse
Service status shows unlock bootloader to yes.. well very thankful for you reply means there is no way to unbrick my phone
talharais said:
Service status shows unlock bootloader to yes.. well very thankful for you reply means there is no way to unbrick my phone
Click to expand...
Click to collapse
Keep an eye on https://forum.xda-developers.com/z3/devs-only/unbricking-d6603-t3365262
I just brick my device too so will try to make some progress on it
nailyk said:
Keep an eye on https://forum.xda-developers.com/z3/devs-only/unbricking-d6603-t3365262
I just brick my device too so will try to make some progress on it
Click to expand...
Click to collapse
Tanks buddy I am watching your thread, and also let me know when done,
Hi, I decided to post it here because it seems that anything I post on Xperia Ion forum is not read, it is inactive.
I already searched everywhere and I'm loosing my hopes. I'm trying to revive an Xperia Ion and this is what I get:
When I plug the phone in the wall charger the red led turns on for some minutes and then turns off.
The same happens when I plug on PC, when the led turns off it is detected as "Somc flash device" in windows device manager and this shows in flashtool:
INFO - Device connected with USB debugging off
INFO - For 2011 devices line, be sure you are not in MTP mode
Nothing changes if I plug in pc with volume + or - pressed, it don't goes into fastboot or flashmode.
I hope you could help me. Thanks
dude i have the same problem as yours i have a z3 d6643 and i made a mistake when downloading the kernal the device loads normal flash mode and flashtools working! power button + volume down runs twrp but it no longer starts at sony black screen someone please help!
evilhedrox said:
Hi, I decided to post it here because it seems that anything I post on Xperia Ion forum is not read, it is inactive.
I already searched everywhere and I'm loosing my hopes. I'm trying to revive an Xperia Ion and this is what I get:
When I plug the phone in the wall charger the red led turns on for some minutes and then turns off.
The same happens when I plug on PC, when the led turns off it is detected as "Somc flash device" in windows device manager and this shows in flashtool:
INFO - Device connected with USB debugging off
INFO - For 2011 devices line, be sure you are not in MTP mode
Nothing changes if I plug in pc with volume + or - pressed, it don't goes into fastboot or flashmode.
I hope you could help me. Thanks
Click to expand...
Click to collapse
Same problem with an XZ, someone has a solution?
sometime Win recognize the device as QUSB_BULK
Looks like I killed my Z5. The model is 6683 (Z5 dual), and I flashed with E6533 (Z3+ dual).
The phone is completely dead, cannot turn on, not vibrating on power button etc.
When I connect to my laptop, it says "unable to recognize USB device", in detail VID_0000&PID_0000.
But if I disconnect the battery, it recognized as "SOMC Flash device", VID_0FCE&PID_DDDE
Is it possible to resurrect it?
I hope if I can flash with correct bootloader in this state, it will enought to boot up and able to flash with the right firmware.
Macs1209 said:
Looks like I killed my Z5. The model is 6683 (Z5 dual), and I flashed with E6533 (Z3+ dual).
The phone is completely dead, cannot turn on, not vibrating on power button etc.
When I connect to my laptop, it says "unable to recognize USB device", in detail VID_0000&PID_0000.
But if I disconnect the battery, it recognized as "SOMC Flash device", VID_0FCE&PID_DDDE
Is it possible to resurrect it?
I hope if I can flash with correct bootloader in this state, it will enought to boot up and able to flash with the right firmware.
Click to expand...
Click to collapse
Are you able to connect it in flashmode and fastboot ?
With battery, no.
Without battery, my laptop recognize as "SOMC Flash device", but no tool can connect to it (like FlashTool).
(I think then different PID is the reason)
Macs1209 said:
With battery, no.
Without battery, my laptop recognize as "SOMC Flash device", but no tool can connect to it (like FlashTool).
(I think then different PID is the reason)
Click to expand...
Click to collapse
it seems to me that you are an advanced person in playing with your mobile, this kind of issues is beyond of my knowledge but I was replying to your thread hopefully someone here can help, I'm fearing that you have messed up with your mobile
Well, you could try to flash it from Ubuntu (NOT inside Windows 10 !) via FlashTool,
under windows there are limitations with different device IDs that separate drivers would be needed (and if only "wrong" ID is detected under Linux it doesn't really matter, since it's detected anyway),
perhaps under Linux operating systems you have more luck
Thank you for idea, but not working.
Finally I found an old SETool3 box , and successfully flashed with it without battery
Somehow it can fixed it.
Macs1209 said:
Thank you for idea, but not working.
Finally I found an old SETool3 box , and successfully flashed with it without battery
Somehow it can fixed it.
Click to expand...
Click to collapse
I am facing a similar situation, can you help me by telling me what exactly did you do to solve the issue step by step?
Same Problem With Me PLZ HELP
Dear Bro Ive same problem with my Xperia e6683 Total Dead After Wrong Flash with Xperia Z3+ File... SO Plz help me how to fit step by step guide plz....
As on 20 Jan 2017
I've Flash Successfully It With Setool fusion Box Without Battery Use Test Pin Method. Now My My Phone Again Alive..
[email protected] said:
Dear Bro Ive same problem with my Xperia e6683 Total Dead After Wrong Flash with Xperia Z3+ File... SO Plz help me how to fit step by step guide plz....
As on 20 Jan 2017
I've Flash Successfully It With Setool fusion Box Without Battery Use Test Pin Method. Now My My Phone Again Alive..
Click to expand...
Click to collapse
Dear Bro Ive same problem with my Xperia x Total Dead After Wrong Flash
The phone is completely dead, cannot turn on, not vibrating on power button etc.
When I connect to my laptop, it says "unable to recognize USB device"
using test pin method it is recognized as "SOMC Flash device"
i have backup ta partition and ftf firmware of my xperia i can't find any tool to flash
can you guide me please
Flashtool Doesn't Recognise This Device. U can use Setool/ Setool Fusion Box to Repai
bma1973 said:
Dear Bro Ive same problem with my Xperia x Total Dead After Wrong Flash
The phone is completely dead, cannot turn on, not vibrating on power button etc.
When I connect to my laptop, it says "unable to recognize USB device"
using test pin method it is recognized as "SOMC Flash device"
i have backup ta partition and ftf firmware of my xperia i can't find any tool to flash
can you guide me please
Click to expand...
Click to collapse
Bro
In this Condition Flashtool Not Recognised Ur Device. There is only a best solution U Can Use SETOOL/SETOOL FUSION BOX To Repair/ Flash Ur Device.
[email protected] said:
Dear Bro Ive same problem with my Xperia e6683 Total Dead After Wrong Flash with Xperia Z3+ File... SO Plz help me how to fit step by step guide plz....
As on 20 Jan 2017
I've Flash Successfully It With Setool fusion Box Without Battery Use Test Pin Method. Now My My Phone Again Alive..
Click to expand...
Click to collapse
bma1973 said:
Dear Bro Ive same problem with my Xperia x Total Dead After Wrong Flash
The phone is completely dead, cannot turn on, not vibrating on power button etc.
When I connect to my laptop, it says "unable to recognize USB device"
using test pin method it is recognized as "SOMC Flash device"
i have backup ta partition and ftf firmware of my xperia i can't find any tool to flash
can you guide me please
Click to expand...
Click to collapse
wrong flash means wrong kernel!
you might be stuck on black screen when you frist switchon device! the device is running! but since its stuck on bootloops no interface is open!
press power and volume up button for 15+ seconds and let it JERK 3 times , this if force shutdown. the device should get connected now in flashmode
Hi, my phone is dead (I think)...
No flashmode/fastboot, no boot, no any led after connecting to pc or anywhere (but pc show unrecognized device- LOL)
Device not recognized
Is there a way to fix it?
Someone help?:crying:
lets solve together
ok
submit post:fingers-crossed:
sbairayen2 said:
Hi, my phone is dead (I think)...
No flashmode/fastboot, no boot, no any led after connecting to pc or anywhere (but pc show unrecognized device- LOL)
Device not recognized
Is there a way to fix it?
Someone help?:crying:
lets solve together
ok
submit post:fingers-crossed:
Click to expand...
Click to collapse
Give us some further information. Was your bootloader unlocked? What was the last thing you did before it died?
Did you try to charge it using the wall plug?
St.Jimmy90 said:
Give us some further information. Was your bootloader unlocked? What was the last thing you did before it died?
Did you try to charge it using the wall plug?
Click to expand...
Click to collapse
It sounds to me like youve tried to flash it without the Google "flashmode" & "Fastboot" drivers installed and / or youve tried to use flashtool... instead of NewFlasher
Have you tried a "Repair" using Sony Companion?
As said above... we need more info..
Have you fixed your xz premium
Same as me.
My z5 died 2 years ago when flashing kernel from flashtool and pc turned off when flashing,
when flashing the kernel is not flashed flashed yill the end and i got anonymus driver when turning on pc and connectiong my phone.
Now no led and no boot and nothing.
Unrecognised driver.
thinking about selling my rooted xzpremium (dual sim). PM if you're interested in buying it.
Try Emma
Hey guys. I need some help. this is my wrong doing !!
I got a network unlocked T mobile which I started using with AT&T. Today I received the unlock code from T mobile to unlock bootloader which I did. then I I installed TWRP and Magisk without any issues. then I tried to fix the persis.img coz fingerpritn is not working. it didnt work so I left it alone. But I dont know why I wiped cache, data and then phone got stuck at boot loop. (no backup). I tried to install using MSM tool but it didnt work. MSM tool was not detecting the phone. then in TWRP I clicked on EDL and now the phone screen is blank. tried every possible combination of keys but no luck. was doing all this on windows 10. any help would be greatly appreciated. thanks
kool_am said:
Hey guys. I need some help. this is my wrong doing !!
I got a network unlocked T mobile which I started using with AT&T. Today I received the unlock code from T mobile to unlock bootloader which I did. then I I installed TWRP and Magisk without any issues. then I tried to fix the persis.img coz fingerpritn is not working. it didnt work so I left it alone. But I dont know why I wiped cache, data and then phone got stuck at boot loop. (no backup). I tried to install using MSM tool but it didnt work. MSM tool was not detecting the phone. then in TWRP I clicked on EDL and now the phone screen is blank. tried every possible combination of keys but no luck. was doing all this on windows 10. any help would be greatly appreciated. thanks
Click to expand...
Click to collapse
So it turns out its not a hard brick. I'm stuck on TWRP. I'm able to get to fastboot. I tried to install Oxygen OS thru fastboot but the PC is not detecting the phone in fastboot. Mac detects it but I believe all the stock Roms are for PC use. I did try it on my MAc and was able to open a terminal window inside the Oxygen OS folder but then the fastboot device command is not found. any help would be greatly appreciated. I installed SDK and ADB drivers on PC but in device manager the device still only shows as Android device with no drivers. !! thanks
kool_am said:
So it turns out its not a hard brick. I'm stuck on TWRP. I'm able to get to fastboot. I tried to install Oxygen OS thru fastboot but the PC is not detecting the phone in fastboot. Mac detects it but I believe all the stock Roms are for PC use. I did try it on my MAc and was able to open a terminal window inside the Oxygen OS folder but then the fastboot device command is not found. any help would be greatly appreciated. I installed SDK and ADB drivers on PC but in device manager the device still only shows as Android device with no drivers. !! thanks
Click to expand...
Click to collapse
Solved !
solved how? i greatly would like to know how to flash from fastboot, i know that isnt what this thread was about but im having the exact same problems you are with msm. i can see the phone in fastboot but i have no idea how to flash or what to flash from there. I can get into recovery but i cant copy anything over to the phone and the drivers dont show up for adb. so i pretty much ONLY have fastboot and dont know what to do! 2 days since the phone been down and im lost AF
JCroffut said:
solved how? i greatly would like to know how to flash from fastboot, i know that isnt what this thread was about but im having the exact same problems you are with msm. i can see the phone in fastboot but i have no idea how to flash or what to flash from there. I can get into recovery but i cant copy anything over to the phone and the drivers dont show up for adb. so i pretty much ONLY have fastboot and dont know what to do! 2 days since the phone been down and im lost AF
Click to expand...
Click to collapse
Can msm detect the phone when connected in fastboot. Also check device manager in pc to make sure it detects the phone as qualcomm device. Otherwise msm will not work.
Download msm. Turn phone off. Connect phone to pc. Open msm. Press start. Press volume down and power button on phone. It should be detected by msm and should start flashing the software.
Standby....
When plugged in the phone in EDL it shows
QUSB_BULK_CID0412 with an exclamation mark inside a yellow triangle
When i plugged in the phone and open fastboot it shows
Android with an exclamation point inside a yellow triangle
I booted up msm, clicked other, clicked start, pressed volume down and volume up and plugged it in. still says waiting for device to connect. ive also tried this with a number of keys being help, ive tried to boot from twrp straight into edl mode, none of which works
which all says to me its a driver issue of some kind, but for 3 days ive been slaving away on xda and cannot for the life of me figure out where to get the drivers.
JCroffut said:
Standby....
When plugged in the phone in EDL it shows
QUSB_BULK_CID0412 with an exclamation mark inside a yellow triangle
When i plugged in the phone and open fastboot it shows
Android with an exclamation point inside a yellow triangle
I booted up msm, clicked other, clicked start, pressed volume down and volume up and plugged it in. still says waiting for device to connect. ive also tried this with a number of keys being help, ive tried to boot from twrp straight into edl mode, none of which works
which all says to me its a driver issue of some kind, but for 3 days ive been slaving away on xda and cannot for the life of me figure out where to get the drivers.
Click to expand...
Click to collapse
It is a driver issue for sure. When connected device manager should detect as qualcomm hd9008.......
kool_am said:
It is a driver issue for sure. When connected device manager should detect as qualcomm hd9008.......
Click to expand...
Click to collapse
i figured that, i am at a complete loss as to where to find the drivers. i actually might need you to hold my hand on this one a tiny bit because im about to smash the phone on the ground and say someone stole it. thats where i am with this phone haha
JCroffut said:
i figured that, i am at a complete loss as to where to find the drivers. i actually might need you to hold my hand on this one a tiny bit because im about to smash the phone on the ground and say someone stole it. thats where i am with this phone haha
Click to expand...
Click to collapse
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
kool_am said:
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
Click to expand...
Click to collapse
standby ill read through it now. we also have 2 different threads going so i can combine them if thats easier for you
kool_am said:
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
Click to expand...
Click to collapse
Only download the qualcomm driver from this link. Or search for it online.
I have spent much more time than you trying to figure this out. I have a pc and Mac both. Mac is not compatible with a lot of the software and my pc usb ports are all bad. Point being, leave it alone for a day or so. Come back at it with a fresh start and fresh mind.
kool_am said:
Only download the qualcomm driver from this link. Or search for it online.
I have spent much more time than you trying to figure this out. I have a pc and Mac both. Mac is not compatible with a lot of the software and my pc usb ports are all bad. Point being, leave it alone for a day or so. Come back at it with a fresh start and fresh mind.
Click to expand...
Click to collapse
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
JCroffut said:
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
Click to expand...
Click to collapse
If I were you, I wouldn't throw the phone away. Like I said it's a simple issue of driver. Install the correct driver and make sure you see it as qualcomm device in device manager. Trust me, from then on, it's just a matter of a few clicks.
I unbricked my phone to t mobile and then converted to global rom without any issues.
kool_am said:
If I were you, I wouldn't throw the phone away. Like I said it's a simple issue of driver. Install the correct driver and make sure you see it as qualcomm device in device manager. Trust me, from then on, it's just a matter of a few clicks.
I unbricked my phone to t mobile and then converted to global rom without any issues.
Click to expand...
Click to collapse
i sent you a private convo on here if thats ok so i dont spam the forum! You may be able to help me out if i could borrow a few minutes of your time!
JCroffut said:
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
Click to expand...
Click to collapse
i was definatly kidding tho this is my only phone and i have to solve this problem lol
I'm not sure if you have read this thread already. I messed up my phone a couple days ago as well and follow the steps there and was able to MSM my phone back to stock.
[OP8][OOS TMO 55CB] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com