Kindly Help me,
I was Flashing my Z3 by Flash Tool , i accidently select D6646 ftf file instead *of D6616 ftf , during flashing Flash Tool gives error at Kernal.sin and Phone goes Down,
No Soft or Hard Reset Work,
NO Flashmood / Fastboot Mood work ,
Flash Tool only Show
'Device connected with USB debugging off
19/021/2017 07:21:01 - INFO *- For 2011 devices line, be sure you are not in MTP mode
and Device Manager Shows SOMC Flash Drive,
When Connect By press Vol Down button and Attach USB Cable, USB not Recognized Error Shows*on Windows 7
I have TA backup from Flash Tool ( ie T1 and T2 ) before flashing in case of Partition break, where as
I realize its kernel brokeup
Kindly Plese Guide me what can I do to live my phone back
are you sure fastboot mode doesnt work? just power off and press vol+ and power if led is blue then you are is fastboot mode. then try to flash kernel.sin in adb command with pc . cheers
Yes sir sureonly red led show just for 2 3 sec n then goes off flash tool shows debugging mode off .. i disconnect battery to completly shut off phone after that i connect n same probelm
https://forum.xda-developers.com/showthread.php?t=2646405
xkeita said:
https://forum.xda-developers.com/showthread.php?t=2646405
Click to expand...
Click to collapse
ihad used that trick after whole day research , I can conclude S1tools does not support 2012 upgrade model, I received error as ID HASH IS NOT SUPPORTED,
however my bootloder is unlocked, and I hav unlocked code also, and also phone is rooted ,
Yes this could work for us as we still doesn't have the preloader dump.
AFAIK there is not unbricking way for now.
Somewhere I read that pc companion could work with Q9008. Also worth to try with emma.
I want working on this to finalize the unbricking guide but will not be soon as I need my device for the rom port. When done I will work on this unbricking.
Also it is not a kernel problem. Your flash replaced s1 bootloader with a wrong one.
Good luck a be patient
What about this: https://forum.xda-developers.com/showthread.php?t=1849170 ?
nailyk said:
Yes this could work for us as we still doesn't have the preloader dump.
AFAIK there is not unbricking way for now.
Somewhere I read that pc companion could work with Q9008. Also worth to try with emma.
I want working on this to finalize the unbricking guide but will not be soon as I need my device for the rom port. When done I will work on this unbricking.
Also it is not a kernel problem. Your flash replaced s1 bootloader with a wrong one.
Good luck a be patient
What about this: https://forum.xda-developers.com/showthread.php?t=1849170 ?
Click to expand...
Click to collapse
Thankq sir, for your reply so if its s1 bootloader then is it possible to bring my phone again live will u guide me what the next thing should i do
talharais said:
Thankq sir, for your reply so if its s1 bootloader then is it possible to bring my phone again live will u guide me what the next thing should i do
Click to expand...
Click to collapse
Sorry for confusing :s
I think, today, there is no way.
You can try with the official emma flash tool or pc companion but I really doubt.
nailyk said:
Sorry for confusing :s
I think, today, there is no way.
You can try with the official emma flash tool or pc companion but I really doubt.
Click to expand...
Click to collapse
Ohhh , sir i have TA backup still cant do anything and also charging also doesnot solve problem as mention in one of the xda thread
https://forum.xda-developers.com/showthread.php?t=1849170&page=1
talharais said:
Ohhh , sir i have TA backup still cant do anything and also charging also doesnot solve problem as mention in one of the xda thread
https://forum.xda-developers.com/showthread.php?t=1849170&page=1
Click to expand...
Click to collapse
Not related with TA backup for now. You change your bootloader with a wrong one.
It is almost like if you flash the wrong bios on your mother board. You can't flash it again until someone find an 'electronic' way.
Give a try with pc companion or emma.
nailyk said:
Not related with TA backup for now. You change your bootloader with a wrong one.
It is almost like if you flash the wrong bios on your mother board. You can't flash it again until someone find an 'electronic' way.
Give a try with pc companion or emma.
Click to expand...
Click to collapse
Pc companion is not reconize the fevice actually i explain what i idid,
I was flashing d6616 by flash tool
Firstly i unlock bootloder by sony , through unlock code they email then i rooted the device by kingo root n then flash accidently i chosse d6646 rom instead of d6616 rom then during flashing flashtool gives error at kernal.sin and after that device goesoff
When i plug into the pc it reconize my device as SOMC Flash device andflash tool gives dubugging off
Thats was the whole senrio by which my device brick so after whole story i really disappointed to know that my device is just use for paper weight... :crying:
I downloaded the emma after install it desnot show any usb device
You own a d6616? It have unlockable bootloader :s
Send it to repair center. No other choice.
And yes it is confusing, it say bootloader unlock after the fastboot command but it is not true.
@blackhawk_LA made some posts about D6616. Maybe he could help you.
I just post here to announce you the bad new your device is hardly softbricked.
nailyk said:
You own a d6616? It have unlockable bootloader :s
Send it to repair center. No other choice.
And yes it is confusing, it say bootloader unlock after the fastboot command but it is not true.
@blackhawk_LA made some posts about D6616. Maybe he could help you.
I just post here to announce you the bad new your device is hardly softbricked.
Click to expand...
Click to collapse
Service status shows unlock bootloader to yes.. well very thankful for you reply means there is no way to unbrick my phone
talharais said:
Service status shows unlock bootloader to yes.. well very thankful for you reply means there is no way to unbrick my phone
Click to expand...
Click to collapse
Keep an eye on https://forum.xda-developers.com/z3/devs-only/unbricking-d6603-t3365262
I just brick my device too so will try to make some progress on it
nailyk said:
Keep an eye on https://forum.xda-developers.com/z3/devs-only/unbricking-d6603-t3365262
I just brick my device too so will try to make some progress on it
Click to expand...
Click to collapse
Tanks buddy I am watching your thread, and also let me know when done,
Hi, I decided to post it here because it seems that anything I post on Xperia Ion forum is not read, it is inactive.
I already searched everywhere and I'm loosing my hopes. I'm trying to revive an Xperia Ion and this is what I get:
When I plug the phone in the wall charger the red led turns on for some minutes and then turns off.
The same happens when I plug on PC, when the led turns off it is detected as "Somc flash device" in windows device manager and this shows in flashtool:
INFO - Device connected with USB debugging off
INFO - For 2011 devices line, be sure you are not in MTP mode
Nothing changes if I plug in pc with volume + or - pressed, it don't goes into fastboot or flashmode.
I hope you could help me. Thanks
dude i have the same problem as yours i have a z3 d6643 and i made a mistake when downloading the kernal the device loads normal flash mode and flashtools working! power button + volume down runs twrp but it no longer starts at sony black screen someone please help!
evilhedrox said:
Hi, I decided to post it here because it seems that anything I post on Xperia Ion forum is not read, it is inactive.
I already searched everywhere and I'm loosing my hopes. I'm trying to revive an Xperia Ion and this is what I get:
When I plug the phone in the wall charger the red led turns on for some minutes and then turns off.
The same happens when I plug on PC, when the led turns off it is detected as "Somc flash device" in windows device manager and this shows in flashtool:
INFO - Device connected with USB debugging off
INFO - For 2011 devices line, be sure you are not in MTP mode
Nothing changes if I plug in pc with volume + or - pressed, it don't goes into fastboot or flashmode.
I hope you could help me. Thanks
Click to expand...
Click to collapse
Same problem with an XZ, someone has a solution?
sometime Win recognize the device as QUSB_BULK
Related
Hi every one want help on ur Bricked tipo Or
Problem with Rooting or any thing u are facing
Feel Free and post here
I or any member might help You....
Xperia Miro And Xperia j users are also invited
Good Luck..:good:
help
hi all in my last thread friends in forum post to my questional thread the offical sony xperia tipo dual ftf i dawnload it
2nd: my phone dos'nt fast boot or flash mode if i connect usb + prees volume- no thing done please help me
cannot boot after unlock bootloader and flashing
i have a problem with booting my tipo ,i want to update with cm10 so i unlock boot loader with android sdk manager and after that flash it with this code "fastboot flash boot boot.img" and then "fastboot reboot" everything gone in fine result . but phone didn't reboot . only once i use power key it vibrate and indicate green led and nothing happen . and then no other things are working after remove battery and connect it i am able to use it with power key, flash mode and fastboot key. but do not able to reboot it .
i think it happen because i unlock bootloader and did not reboot it and flash it in that step ..
plz help me with this..
rinkumeher said:
i have a problem with booting my tipo ,i want to update with cm10 so i unlock boot loader with android sdk manager and after that flash it with this code "fastboot flash boot boot.img" and then "fastboot reboot" everything gone in fine result . but phone didn't reboot . only once i use power key it vibrate and indicate green led and nothing happen . and then no other things are working after remove battery and connect it i am able to use it with power key, flash mode and fastboot key. but do not able to reboot it .
i think it happen because i unlock bootloader and did not reboot it and flash it in that step ..
plz help me with this..
Click to expand...
Click to collapse
Which build fxp are you using? Get latest, and use flashtool to fastboot kernel this time.
Some fxp build have boot.img problem.
Sent from my ST27i
joehoor said:
hi all in my last thread friends in forum post to my questional thread the offical sony xperia tipo dual ftf i dawnload it
2nd: my phone dos'nt fast boot or flash mode if i connect usb + prees volume- no thing done please help me
Click to expand...
Click to collapse
Switch off ur phone hold volume down and connect to pc ..(while holding volume-)..To enter in
Flashmode also sometime it take 2-3 time to connect
Did u get green notification light on ur phone..
Tell me If u get green light I will help u further.. .
If u donot get green light than what u r getting..
rinkumeher said:
i have a problem with booting my tipo ,i want to update with cm10 so i unlock boot loader with android sdk manager and after that flash it with this code "fastboot flash boot boot.img" and then "fastboot reboot" everything gone in fine result . but phone didn't reboot . only once i use power key it vibrate and indicate green led and nothing happen . and then no other things are working after remove battery and connect it i am able to use it with power key, flash mode and fastboot key. but do not able to reboot it .
i think it happen because i unlock bootloader and did not reboot it and flash it in that step ..
plz help me with this..
Click to expand...
Click to collapse
Flash stock ftf first and then flash boot.IMG through flashtool of latest fxp205 and through cwm flash fxp Rom
Wipe data and cache.......
This method worked for me..
i try unlock bootloader but when i type this command "fastboot.exe -i 0x0fce getvar version" i don't take any response and i have the following message "waiting for device".
tassosmer said:
i try unlock bootloader but when i type this command "fastboot.exe -i 0x0fce getvar version" i don't take any response and i have the following message "waiting for device".
Click to expand...
Click to collapse
It is due to because ur drivers are not installed properly
See in device manager on ur pc if there is exclamation mark on ur device
If ur drivers are installed correctly than u can try this out
This method http://forum.xda-developers.com/showthread.php?t=1560613 is easy and there is no need of cmd etc:laugh:
By this u can unlock ur bootloader easily
no ting done
nishuy21 said:
Switch off ur phone hold volume down and connect to pc ..(while holding volume-)..To enter in
Flashmode also sometime it take 2-3 time to connect
Did u get green notification light on ur phone..
Tell me If u get green light I will help u further.. .
If u donot get green light than what u r getting..
Click to expand...
Click to collapse
no thing done or no light or nothing happens if i turn power only 3 led red lights !!:crying:
nishuy21 said:
It is due to because ur drivers are not installed properly
See in device manager on ur pc if there is exclamation mark on ur device
If ur drivers are installed correctly than u can try this out
This method http://forum.xda-developers.com/showthread.php?t=1560613 is easy and there is no need of cmd etc:laugh:
By this u can unlock ur bootloader easily
Click to expand...
Click to collapse
I tried this program yesterday but when i click "unlock BL" the program crashes.
joehoor said:
no thing done or no light or nothing happens if i turn power only 3 led red lights !!:crying:
Click to expand...
Click to collapse
Try on other USB ports
Try it with other USB data cable..
Try seus to repair ur phone if still can not
Then I'm afraid u have some hardware problem and u should go to Sony service centreAnd the problem can be of ur pc try on
Other pc if problem persist than bad luck u need to go to SC
Also try to disabe all USB ports and than enable them again in device manager on pc and reboot...
Good luck and tell us further more....
tassosmer said:
I tried this program yesterday but when i click "unlock BL" the program crashes.
Click to expand...
Click to collapse
I looked a bit at ur problem and this is with many other people
And all of them donot have fastboot mode driver installed correctly
click on the start menu, then right click on my computer, then click on manage from the drop down list, then in the window that pops up on the left hand side click on device manager.if u see unknown source or exclamation mark when u connect ur device
U can see this link http://forums.androidcentral.com/ve...ock-bootloader-root-verizon-galaxy-nexus.html for more description although it is for nexus but the process is same
Scroll down and see troubleshooting it might help u
Than ur drivers are not installed correctly
If drivers are installed than u must got a name like adb interface/bridge etc.
If this does not work than
Same as I said in above post
This problem can be caused by ur pc try this on any other pc
And install fastboot drivers or even u can use different USB ports some time USB ports donot work properly
Thank you for your advice. I did it. Now I face a big problem and i am terrified. I tried install fxp 205 but i made a mistake and my tipo doesn't work. My pc can't recognize it, so i can't flash ftf via flashtool. Please if you can help me!
tassosmer said:
Thank you for your advice. I did it. Now I face a big problem and i am terrified. I tried install fxp 205 but i made a mistake and my tipo doesn't work. My pc can't recognize it, so i can't flash ftf via flashtool. Please if you can help me!
Click to expand...
Click to collapse
What mistake have u done
Well can u enter flashmode I.e green notification light on tipo when u connect it
To pc with vol-
If it enters it is softbricked but if not
U are hard bricked no chance else repairing at service centre
If soft bricked still pc does not recognize see above post...
nishuy21 said:
What mistake have u done
Well can u enter flashmode I.e green notification light on tipo when u connect it
To pc with vol-
If it enters it is softbricked but if not
U are hard bricked no chance else repairing at service centre
If soft bricked still pc does not recognize see above post...
Click to expand...
Click to collapse
No, I can't do anything. I tried put phone to charge but nothing happened. i think that i made a hard brick. I entered to fastboot and i chose via flashtool to put boot.img but suddenly the phone turned off.
rinkumeher said:
i have a problem with booting my tipo ,i want to update with cm10 so i unlock boot loader with android sdk manager and after that flash it with this code "fastboot flash boot boot.img" and then "fastboot reboot" everything gone in fine result . but phone didn't reboot . only once i use power key it vibrate and indicate green led and nothing happen . and then no other things are working after remove battery and connect it i am able to use it with power key, flash mode and fastboot key. but do not able to reboot it .
i think it happen because i unlock bootloader and did not reboot it and flash it in that step ..
plz help me with this..
Click to expand...
Click to collapse
i am using cm10 fxp203
---------- Post added at 11:33 PM ---------- Previous post was at 11:20 PM ----------
nishuy21 said:
Flash stock ftf first and then flash boot.IMG through flashtool of latest fxp205 and through cwm flash fxp Rom
Wipe data and cache.......
This method worked for me..
Click to expand...
Click to collapse
thanks but i had deposit my cell in service center they told me that os is not detecting so they will replace motherboard of my cell, let see what will happen next whether they will charge me or not. bless luck for me
rinkumeher said:
i am using cm10 fxp203
---------- Post added at 11:33 PM ---------- Previous post was at 11:20 PM ----------
thanks but i had deposit my cell in service center they told me that os is not detecting so they will replace motherboard of my cell, let see what will happen next whether they will charge me or not. bless luck for me[/QUOTE
As long as you unlocked bootloader you lost warranty. Tomorrow i will go for bigger problem. I hope that the cost won't be too much.
Click to expand...
Click to collapse
tassosmer said:
No, I can't do anything. I tried put phone to charge but nothing happened. i think that i made a hard brick. I entered to fastboot and i chose via flashtool to put boot.img but suddenly the phone turned off.
Click to expand...
Click to collapse
Be sure if ur phone is hardbricked sometimes it looks like but it is not
If hard bricked.......
Go to Sony service centre and there is also one thing I have heard about
"Jtag" it can unbrick many hard bricked phones at very low cost...
Go for it if it is available in ur country..
Better luck next time
nishuy21 said:
Be sure if ur phone is hardbricked sometimes it looks like but it is not
If hard bricked.......
Go to Sony service centre and there is also one thing I have heard about
"Jtag" it can unbrick many hard bricked phones at very low cost...
Go for it if it is available in ur country..
Better luck next time
Click to expand...
Click to collapse
The only life sign of tipo is the vibration when i turn it on. This happened once today and once yesterday night.
I need driver's download link for xperia
Tipo please
Sent from my ST21i using xda app-developers app
I have the Xperia L (C2105) with latest firmware (.14 not .17 because in my country for some reason .17 is not yet available).\
I am trying to connect into flashmode but I can't.
Phone is accessible throuh Sony PC Companion. When I plug it Windows (7) recognize it .
I am trying with SUS but with no luck.
This is what I do.
(usb cable is plugged into PC)
1. Switch off phone completely. Screen goes black and phone does not respond.
2. Press and hold volume down
3. Insert usb into phone slot.
nothing happens.
I guess I should see led goes green, or phone switching on, or PC showing a pop-up dialog? In any case phone remains off and SUS can't go on to the next step after connection. Is there any problem with the phone?
PS: I also tried factory reset.
Any help would be appreciated.
OK, I managed to connect in flashmode. What I do is press once or twice the power switch while holding volume down.
Isn't it weird?
xpan said:
OK, I managed to connect in flashmode. What I do is press once or twice the power switch while holding volume down.
Isn't it weird?
Click to expand...
Click to collapse
Okay, I think i've a similar problem. I cannot connect my device in flashmode. WHenver i try to do, the led just blinks red and then green, then nothing happens. Could you please elaborate how you managed it?
Hi, to be honest, I can't remember. This phone was one of the worst phones I 've ever owned. Camera was blurry, mic was not working. I didn't even bother to fix it. I threw it to the recycle bin. And I always take good care of my gadgets. That phone was the reason not to buy a Sony phone ever again. I now own a LG G2 and I am perfectly happy.
Anyway, I think I remember trying many times until it finally connected. I did various things, but the actual reason it finally connected was luck. Yes, luck. Try it many times and if you are lucky enough, you will manage connection. Or give it to someone else and buy a proper phone.
xperiaxploit said:
Okay, I think i've a similar problem. I cannot connect my device in flashmode. WHenver i try to do, the led just blinks red and then green, then nothing happens. Could you please elaborate how you managed it?
Click to expand...
Click to collapse
First power off the phone.
Then continuously press volume down button while connecting the USB cable to the phone.
(as i remember the phone led color may turned green when it's in flashmode)
Then check 'Flashtool' log, it will be saying 'device connected in flashmode'.
happy flashing.
xperiaxploit said:
Okay, I think i've a similar problem. I cannot connect my device in flashmode. WHenver i try to do, the led just blinks red and then green, then nothing happens. Could you please elaborate how you managed it?
Click to expand...
Click to collapse
Exactly, if you see red, green and then nothing, it means your device is in flashmode. Open up flashtool and get flashing! It will say device connected in flashmode
Agent_fabulous said:
Exactly, if you see red, green and then nothing, it means your device is in flashmode. Open up flashtool and get flashing! It will say device connected in flashmode
Click to expand...
Click to collapse
The flashtool doesn't detect my phone even after the led blinks. But if i connect the same phone to same computer through same usb cable in fastboot, the flashtool says device connected in fastboot. Nothing when in flashmode.
xperiaxploit said:
The flashtool doesn't detect my phone even after the led blinks. But if i connect the same phone to same computer through same usb cable in fastboot, the flashtool says device connected in fastboot. Nothing when in flashmode.
Click to expand...
Click to collapse
Driver issue. In the folder of flashtool, you'll find a sub folder called Drivers, run the file in it and select flashmode drivers and Common Drivers for taoshan. In Device Manager, your device may be listed as S1 Boot service or something. Update device driver to SEMC Flash device which should be under Sony Entertainment Mobile Communications, in all devices.
Agent_fabulous said:
Driver issue. In the folder of flashtool, you'll find a sub folder called Drivers, run the file in it and select flashmode drivers and Common Drivers for taoshan. In Device Manager, your device may be listed as S1 Boot service or something. Update device driver to SEMC Flash device which should be under Sony Entertainment Mobile Communications, in all devices.
Click to expand...
Click to collapse
Thank you so much bro, for all your help. I really appreciate it. I have flashed stock rom hundreds of times over the span of 3 years (yeah i bought the phone as soon as it was released into the market and unlocked the bootloader soon after). So I think I would have know if it was a driver problem. But it's not. It's all about secondary bootloader which I screwed up while installing TWRP into the FOTAKernel partition (which I did not backup the original). For more info, check the link below
http://forum.xda-developers.com/xpe...-flashmode-t3198869/post64859858#post64859858
xperiaxploit said:
Thank you so much bro, for all your help. I really appreciate it. I have flashed stock rom hundreds of times over the span of 3 years (yeah i bought the phone as soon as it was released into the market and unlocked the bootloader soon after). So I think I would have know if it was a driver problem. But it's not. It's all about secondary bootloader which I screwed up while installing TWRP into the FOTAKernel partition (which I did not backup the original). For more info, check the link below
http://forum.xda-developers.com/xpe...-flashmode-t3198869/post64859858#post64859858
Click to expand...
Click to collapse
Hmm, that's new. I didn't think such a thing could happen. Thanks mate!
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
I am not able to post image. Help me. I don't have 10 post count yet.
nik_123 said:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
Click to expand...
Click to collapse
So, you cannot get into flashmode or fastboot? Power off your phone, hold volume up and plug it into your pc without hitting the power button. Do you get any blue led or quick led flash at all? I'm not sure about your device's condition but I can surely try getting you files from my phone.
Try installing flashtool and see if flashtool recognizes your phone at all.
Agent_fabulous said:
So, you cannot get into flashmode or fastboot? Power off your phone, hold volume up and plug it into your pc without hitting the power button. Do you get any blue led or quick led flash at all? I'm not sure about your device's condition but I can surely try getting you files from my phone.
Try installing flashtool and see if flashtool recognizes your phone at all.
Click to expand...
Click to collapse
Only red LED glows while I plug it in PC. Flashtool can not recognize. EMMC tool recognize but can't find/download the files.
I am pretty sure once I get the tool running it will bring back my phone alive.
nik_123 said:
Only red LED glows while I plug it in PC. Flashtool can not recognize. EMMC tool recognize but can't find/download the files.
I am pretty sure once I get the tool running it will bring back my phone alive.
Click to expand...
Click to collapse
Hmm, can QPST find your phone? I'm trying to get a QPST/QCN backup which could be helpful. However, fastboot, flashmode, recovery or device running, I get ports empty. Can anyone help me out here? I can try draining my battery so I have the little phase of the dull red led where the device won't power on until it's a little charged.
Agent_fabulous said:
Hmm, can QPST find your phone? I'm trying to get a QPST/QCN backup which could be helpful. However, fastboot, flashmode, recovery or device running, I get ports empty. Can anyone help me out here? I can try draining my battery so I have the little phase of the dull red led where the device won't power on until it's a little charged.
Click to expand...
Click to collapse
I guess yes, but I don't remember exactly. Switch off your phone and connect may be it should detect.
nik_123 said:
I guess yes, but I don't remember exactly. Switch off your phone and connect may be it should detect.
Click to expand...
Click to collapse
Tried that but it ends up turning on and goes to the charging animation. (Which is after the Sony Logo.) Waiting for my phone to drain
nik_123 said:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
Click to expand...
Click to collapse
Jesus Christ, you installed a ROM without unlocking the bootloader first?... yare yare daze...
stuckbootloader said:
Jesus Christ, you installed a ROM without unlocking the bootloader first?... yare yare daze...
Click to expand...
Click to collapse
I unlocked it but the ROM zip was not flashing through TWRP. After 2-3 tries my phone went full dead. If you can help it will be great.
nik_123 said:
I unlocked it but the ROM zip was not flashing through TWRP. After 2-3 tries my phone went full dead. If you can help it will be great.
Click to expand...
Click to collapse
I'm afraid I can't...
Agent_fabulous said:
Tried that but it ends up turning on and goes to the charging animation. (Which is after the Sony Logo.) Waiting for my phone to drain
Click to expand...
Click to collapse
eh... if your device is showing loading anymation this means charger is loaded.... so no you dont have a hardbrick... try to reach fastbootmode over and over again
Sent from my Xperia T using XDA Free mobile app
SdtBarbarossa said:
eh... if your device is showing loading anymation this means charger is loaded.... so no you dont have a hardbrick... try to reach fastbootmode over and over again
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
My phone is working fine. However, I've no idea how to get a QPST/QCN Backup (which I guess could) help out @nik_123
Agent_fabulous said:
My phone is working fine. However, I've no idea how to get a QPST/QCN Backup (which I guess could) help out @nik_123
Click to expand...
Click to collapse
nope... even if we have a snapdragon... since this is a semcflash device a backup is useless...
Sent from my Xperia T using XDA Free mobile app
Hello sir,
I had the same problem a month ago and I fixed my bricked Xperia L.
Just go to this thread and follow the steps ^^
http://forum.xda-developers.com/showthread.php?t=2695344
The thread says u need to download WMSHUA, but its in chinese language. If you don't know what it means just reply to this and i will translate it.
Good luck!
If it didn't worked, or u need help reply.
Dear XDA Community,
I have 2 weeks my phone just dead,
I have tried to recognize the phone with Sony PC Companion, Emma, and the Sony Mobile Flasher by Androxyde (found the program as "flashtool-0.9.19.8"). None of them could detect the phone as a phone, except the last one mentioned (flashtool-0.9.19.8), but it just kinda detects it halfway.
Here's the log it gives:
30/040/2016 18:40:01 - INFO - Device connected with USB debugging off
30/040/2016 18:40:01 - INFO - For 2011 devices line, be sure you are not in MTP mode
When I try to access it with fastboot mode, and press the "Check current device status" button, I get this:
30/040/2016 18:40:33 - INFO - Device Status: NOT FOUND
I also tried booting the phone into fastboot mode (holding volume up and power button, but nothing happens at all).
help,help,help
Is there any hope to fix it?:crying::crying:
Thank you in advance!
hendra461 said:
Dear XDA Community,
I have 2 weeks my phone just dead,
I have tried to recognize the phone with Sony PC Companion, Emma, and the Sony Mobile Flasher by Androxyde (found the program as "flashtool-0.9.19.8"). None of them could detect the phone as a phone, except the last one mentioned (flashtool-0.9.19.8), but it just kinda detects it halfway.
Here's the log it gives:
30/040/2016 18:40:01 - INFO - Device connected with USB debugging off
30/040/2016 18:40:01 - INFO - For 2011 devices line, be sure you are not in MTP mode
When I try to access it with fastboot mode, and press the "Check current device status" button, I get this:
30/040/2016 18:40:33 - INFO - Device Status: NOT FOUND
I also tried booting the phone into fastboot mode (holding volume up and power button, but nothing happens at all).
help,help,help
Is there any hope to fix it?:crying::crying:
Thank you in advance!
Click to expand...
Click to collapse
Broo I have a d2212 it's in a pretty similar state for the past 4months only the test point method can revive ur phone ....but that needs a ta backup if u have one contact uncle Lucifer on XDA he will help u
Basically when u try to boot or press ur power button all u get is a blinking red LED.... That's a sign of corrupted bootloader's
U must have flashed the wrong file like did or must have messed with ur bootloader somehow...if u don't have a ta backup...... I don't really know a. Solution apart from change of motherboard apart from that if u do have a ta backup congosgone will come back to life by test point method
Sunderesh said:
Broo I have a d2212 it's in a pretty similar state for the past 4months only the test point method can revive ur phone ....but that needs a ta backup if u have one contact uncle Lucifer on XDA he will help u
Basically when u try to boot or press ur power button all u get is a blinking red LED.... That's a sign of corrupted bootloader's
U must have flashed the wrong file like did or must have messed with ur bootloader somehow...if u don't have a ta backup...... I don't really know a. Solution apart from change of motherboard apart from that if u do have a ta backup congosgone will come back to life by test point method
Click to expand...
Click to collapse
i m facing a same problem and i wanna know what is ta backup??do u mean titanium backup??if yes, then i have titanium backup on sd card as well as on pc
mihir762000 said:
i m facing a same problem and i wanna know what is ta backup??do u mean titanium backup??if yes, then i have titanium backup on sd card as well as on pc
Click to expand...
Click to collapse
Ta backup is the partition backup before the bootloader is been unlock I think you dint done that mostly no one dose
Anyone come across a solution to the OP's issue yet ?
Looks like I killed my Z5. The model is 6683 (Z5 dual), and I flashed with E6533 (Z3+ dual).
The phone is completely dead, cannot turn on, not vibrating on power button etc.
When I connect to my laptop, it says "unable to recognize USB device", in detail VID_0000&PID_0000.
But if I disconnect the battery, it recognized as "SOMC Flash device", VID_0FCE&PID_DDDE
Is it possible to resurrect it?
I hope if I can flash with correct bootloader in this state, it will enought to boot up and able to flash with the right firmware.
Macs1209 said:
Looks like I killed my Z5. The model is 6683 (Z5 dual), and I flashed with E6533 (Z3+ dual).
The phone is completely dead, cannot turn on, not vibrating on power button etc.
When I connect to my laptop, it says "unable to recognize USB device", in detail VID_0000&PID_0000.
But if I disconnect the battery, it recognized as "SOMC Flash device", VID_0FCE&PID_DDDE
Is it possible to resurrect it?
I hope if I can flash with correct bootloader in this state, it will enought to boot up and able to flash with the right firmware.
Click to expand...
Click to collapse
Are you able to connect it in flashmode and fastboot ?
With battery, no.
Without battery, my laptop recognize as "SOMC Flash device", but no tool can connect to it (like FlashTool).
(I think then different PID is the reason)
Macs1209 said:
With battery, no.
Without battery, my laptop recognize as "SOMC Flash device", but no tool can connect to it (like FlashTool).
(I think then different PID is the reason)
Click to expand...
Click to collapse
it seems to me that you are an advanced person in playing with your mobile, this kind of issues is beyond of my knowledge but I was replying to your thread hopefully someone here can help, I'm fearing that you have messed up with your mobile
Well, you could try to flash it from Ubuntu (NOT inside Windows 10 !) via FlashTool,
under windows there are limitations with different device IDs that separate drivers would be needed (and if only "wrong" ID is detected under Linux it doesn't really matter, since it's detected anyway),
perhaps under Linux operating systems you have more luck
Thank you for idea, but not working.
Finally I found an old SETool3 box , and successfully flashed with it without battery
Somehow it can fixed it.
Macs1209 said:
Thank you for idea, but not working.
Finally I found an old SETool3 box , and successfully flashed with it without battery
Somehow it can fixed it.
Click to expand...
Click to collapse
I am facing a similar situation, can you help me by telling me what exactly did you do to solve the issue step by step?
Same Problem With Me PLZ HELP
Dear Bro Ive same problem with my Xperia e6683 Total Dead After Wrong Flash with Xperia Z3+ File... SO Plz help me how to fit step by step guide plz....
As on 20 Jan 2017
I've Flash Successfully It With Setool fusion Box Without Battery Use Test Pin Method. Now My My Phone Again Alive..
[email protected] said:
Dear Bro Ive same problem with my Xperia e6683 Total Dead After Wrong Flash with Xperia Z3+ File... SO Plz help me how to fit step by step guide plz....
As on 20 Jan 2017
I've Flash Successfully It With Setool fusion Box Without Battery Use Test Pin Method. Now My My Phone Again Alive..
Click to expand...
Click to collapse
Dear Bro Ive same problem with my Xperia x Total Dead After Wrong Flash
The phone is completely dead, cannot turn on, not vibrating on power button etc.
When I connect to my laptop, it says "unable to recognize USB device"
using test pin method it is recognized as "SOMC Flash device"
i have backup ta partition and ftf firmware of my xperia i can't find any tool to flash
can you guide me please
Flashtool Doesn't Recognise This Device. U can use Setool/ Setool Fusion Box to Repai
bma1973 said:
Dear Bro Ive same problem with my Xperia x Total Dead After Wrong Flash
The phone is completely dead, cannot turn on, not vibrating on power button etc.
When I connect to my laptop, it says "unable to recognize USB device"
using test pin method it is recognized as "SOMC Flash device"
i have backup ta partition and ftf firmware of my xperia i can't find any tool to flash
can you guide me please
Click to expand...
Click to collapse
Bro
In this Condition Flashtool Not Recognised Ur Device. There is only a best solution U Can Use SETOOL/SETOOL FUSION BOX To Repair/ Flash Ur Device.
[email protected] said:
Dear Bro Ive same problem with my Xperia e6683 Total Dead After Wrong Flash with Xperia Z3+ File... SO Plz help me how to fit step by step guide plz....
As on 20 Jan 2017
I've Flash Successfully It With Setool fusion Box Without Battery Use Test Pin Method. Now My My Phone Again Alive..
Click to expand...
Click to collapse
bma1973 said:
Dear Bro Ive same problem with my Xperia x Total Dead After Wrong Flash
The phone is completely dead, cannot turn on, not vibrating on power button etc.
When I connect to my laptop, it says "unable to recognize USB device"
using test pin method it is recognized as "SOMC Flash device"
i have backup ta partition and ftf firmware of my xperia i can't find any tool to flash
can you guide me please
Click to expand...
Click to collapse
wrong flash means wrong kernel!
you might be stuck on black screen when you frist switchon device! the device is running! but since its stuck on bootloops no interface is open!
press power and volume up button for 15+ seconds and let it JERK 3 times , this if force shutdown. the device should get connected now in flashmode