I have the Xperia L (C2105) with latest firmware (.14 not .17 because in my country for some reason .17 is not yet available).\
I am trying to connect into flashmode but I can't.
Phone is accessible throuh Sony PC Companion. When I plug it Windows (7) recognize it .
I am trying with SUS but with no luck.
This is what I do.
(usb cable is plugged into PC)
1. Switch off phone completely. Screen goes black and phone does not respond.
2. Press and hold volume down
3. Insert usb into phone slot.
nothing happens.
I guess I should see led goes green, or phone switching on, or PC showing a pop-up dialog? In any case phone remains off and SUS can't go on to the next step after connection. Is there any problem with the phone?
PS: I also tried factory reset.
Any help would be appreciated.
OK, I managed to connect in flashmode. What I do is press once or twice the power switch while holding volume down.
Isn't it weird?
xpan said:
OK, I managed to connect in flashmode. What I do is press once or twice the power switch while holding volume down.
Isn't it weird?
Click to expand...
Click to collapse
Okay, I think i've a similar problem. I cannot connect my device in flashmode. WHenver i try to do, the led just blinks red and then green, then nothing happens. Could you please elaborate how you managed it?
Hi, to be honest, I can't remember. This phone was one of the worst phones I 've ever owned. Camera was blurry, mic was not working. I didn't even bother to fix it. I threw it to the recycle bin. And I always take good care of my gadgets. That phone was the reason not to buy a Sony phone ever again. I now own a LG G2 and I am perfectly happy.
Anyway, I think I remember trying many times until it finally connected. I did various things, but the actual reason it finally connected was luck. Yes, luck. Try it many times and if you are lucky enough, you will manage connection. Or give it to someone else and buy a proper phone.
xperiaxploit said:
Okay, I think i've a similar problem. I cannot connect my device in flashmode. WHenver i try to do, the led just blinks red and then green, then nothing happens. Could you please elaborate how you managed it?
Click to expand...
Click to collapse
First power off the phone.
Then continuously press volume down button while connecting the USB cable to the phone.
(as i remember the phone led color may turned green when it's in flashmode)
Then check 'Flashtool' log, it will be saying 'device connected in flashmode'.
happy flashing.
xperiaxploit said:
Okay, I think i've a similar problem. I cannot connect my device in flashmode. WHenver i try to do, the led just blinks red and then green, then nothing happens. Could you please elaborate how you managed it?
Click to expand...
Click to collapse
Exactly, if you see red, green and then nothing, it means your device is in flashmode. Open up flashtool and get flashing! It will say device connected in flashmode
Agent_fabulous said:
Exactly, if you see red, green and then nothing, it means your device is in flashmode. Open up flashtool and get flashing! It will say device connected in flashmode
Click to expand...
Click to collapse
The flashtool doesn't detect my phone even after the led blinks. But if i connect the same phone to same computer through same usb cable in fastboot, the flashtool says device connected in fastboot. Nothing when in flashmode.
xperiaxploit said:
The flashtool doesn't detect my phone even after the led blinks. But if i connect the same phone to same computer through same usb cable in fastboot, the flashtool says device connected in fastboot. Nothing when in flashmode.
Click to expand...
Click to collapse
Driver issue. In the folder of flashtool, you'll find a sub folder called Drivers, run the file in it and select flashmode drivers and Common Drivers for taoshan. In Device Manager, your device may be listed as S1 Boot service or something. Update device driver to SEMC Flash device which should be under Sony Entertainment Mobile Communications, in all devices.
Agent_fabulous said:
Driver issue. In the folder of flashtool, you'll find a sub folder called Drivers, run the file in it and select flashmode drivers and Common Drivers for taoshan. In Device Manager, your device may be listed as S1 Boot service or something. Update device driver to SEMC Flash device which should be under Sony Entertainment Mobile Communications, in all devices.
Click to expand...
Click to collapse
Thank you so much bro, for all your help. I really appreciate it. I have flashed stock rom hundreds of times over the span of 3 years (yeah i bought the phone as soon as it was released into the market and unlocked the bootloader soon after). So I think I would have know if it was a driver problem. But it's not. It's all about secondary bootloader which I screwed up while installing TWRP into the FOTAKernel partition (which I did not backup the original). For more info, check the link below
http://forum.xda-developers.com/xpe...-flashmode-t3198869/post64859858#post64859858
xperiaxploit said:
Thank you so much bro, for all your help. I really appreciate it. I have flashed stock rom hundreds of times over the span of 3 years (yeah i bought the phone as soon as it was released into the market and unlocked the bootloader soon after). So I think I would have know if it was a driver problem. But it's not. It's all about secondary bootloader which I screwed up while installing TWRP into the FOTAKernel partition (which I did not backup the original). For more info, check the link below
http://forum.xda-developers.com/xpe...-flashmode-t3198869/post64859858#post64859858
Click to expand...
Click to collapse
Hmm, that's new. I didn't think such a thing could happen. Thanks mate!
Related
Hi,
I have tried booting into flashmode > 20 times now, but can't get it to work.
I am doing the following:
- Disconnect USB-Cable
- Poweroff Phone
- Press Volume Down Button
- Connect USB-Cable
Now the LED blinds red/green very quickly, but then the phone just boots normally, beginning with the white screen with the Sony Logo and the Xperia Logo. If I keep holding the Volume Down Button, it boots into safe mode.
Any ideas what I may be doing wrong going into flashmode? Is there another way to get into flashmode?
The device is encrypted, maybe that has something to do with it?
Is it at all possible that this is because of a missing driver? I did install the flashmode driver using flashtool.
Thanks
Yannik
It does sound like a driver issue.
Make sure you have the Latest version of Flashtool installed, and try the driver installer again.
On your phone, in Developer options (enabled in the Settings main menu by going to Settings > About phone > and tapping Build number 7 times) , make sure you have USB debugging turned on, and I also allow mock locations. You must have Unknown Sources ticked in Security settings too.
I have successfully flashed mine this way.
Before you start Flashtool, turn the phone off, hold volume down, and plug in the USB lead to your computer. The LED on the phone should turn a solid green. The computer should sort out the drivers itself.
If you're above Windows 7 then there are other things you have to do to get the drivers to install properly, or so I've heard, but I don't know for sure as I refuse to leave 7 behind. I hate the tiles in Windows 8, and I guess in 10 too.
Once that's done, you're good to go with Flashtool.
Guessing the encryption has something to do with it.
It actually seems to have been some kind of driver issue.
The flashtool drivers are installed (activated the non-signed driver installation), as well as the sony pc companion software. Unfortunately, I could not resolve this issue and get flashmode to work on Windows 8.1 x64.
However, flashmode did work (without any driver installation!) on a Linux Mint system.
yannik~ said:
It actually seems to have been some kind of driver issue.
The flashtool drivers are installed (activated the non-signed driver installation), as well as the sony pc companion software. Unfortunately, I could not resolve this issue and get flashmode to work on Windows 8.1 x64.
However, flashmode did work (without any driver installation!) on a Linux Mint system.
Click to expand...
Click to collapse
I have been trying to use flash tool to put on debranded software. I simply cannot get it in flashmode. It will not read the new firmware or allow me to select anything.
When I try to install the drivers, found in flashtool folder it does not allow me, comes up with error
http://www.flashtool.net/win8drivers.php
Sent from my E6653 using Tapatalk
adamz5 said:
When I try to install the drivers, found in flashtool folder it does not allow me, comes up with error
Click to expand...
Click to collapse
Have you booted Windows in “Disable driver signature enforcement” mode?
From: http://www.xperiablog.net/2015/03/1...peria-lollipop-using-xperifirm-and-flashtool/
Note: To install the Flashtool drivers for Windows 8/Windows 8.1, please follow the steps below.
1) Press the Windows key + R and in the run box type: shutdown.exe /r /o /f /t 00
– Now make the following selections to boot into the Start Up Setting Screen: Troubleshoot > Advanced options > Start Up Settings > Restart
– Then, when the machine restarts, select number 7 i.e. “Disable driver signature enforcement”. Your machine will start with Driver signing enforcement disabled until the next reboot.
2) Now you can install the Flashtool drivers.
– Windows will warn that the driver is not signed and will require you to confirm the installation.
– Once the installation is complete, reboot the machine
Click to expand...
Click to collapse
Haha I forgot that you need USB debugging and unknown source on, when I did flash with flashtool it stops half way saying USB debugging and unknown source to be turn on, kinda soft bricked my phone had to repair with pc companion oooops
mine just turns green for a fraction of a second and then boots, while flashtool tells me i should be in usb debugging mode, even thought it is set as such from the dev options.
Any suggestions? I keep the vol down button pressed until about 1 second after plugging the cable. i tried even for a longer period, the led turns green for half a second and then nothing.
barkohba said:
mine just turns green for a fraction of a second and then boots, while flashtool tells me i should be in usb debugging mode, even thought it is set as such from the dev options.
Any suggestions? I keep the vol down button pressed until about 1 second after plugging the cable. i tried even for a longer period, the led turns green for half a second and then nothing.
Click to expand...
Click to collapse
Does the phone still boots or it stuck somewhere?
Sent from my E6653 using Tapatalk
Driver
In my case, it doesn't show up the driver for Xperia Z5, just until the Z3, not even for Z3+, and I dont know where to find the correct driver for Z5, and I have downloaded the lastest version of Flashtool.
Does anyone know what can I do?
I've got the same problem as yours. I wanted to debrand my xperia z5, I created the ftf file to flash with flashtool but I can't get the flash mode... going in the flashtool download page I've noticed that it says: 0.9.19.0 was valid for ZL,Z1,Z2,Z3,Z3c,Z3+/Z4,Z4Tablet,E4,E4G,M2,M4 because of new FSC feature added --> our device doesn't appear in the list so I think we have to wait for a little. It's my opinion...sorry for my bad english, I'll stay tuned for further information
Flashtool latest version is 0.9.19.10 and does support Z5 once you patch x10flasher.jar:
http://www.flashtool.net/downloads.php
To apply the 0.9.19.10 patch, you must be on 0.9.19.2, 0.9.19.3, 0.9.19.4, 0.9.19.5, 0.9.19.6, 0.9.19.7, 0.9.19.8 or 0.9.19.9 and replace x10flasher.jar with the one from the patch.
doum89 said:
I've got the same problem as yours. I wanted to debrand my xperia z5, I created the ftf file to flash with flashtool but I can't get the flash mode... going in the flashtool download page I've noticed that it says: 0.9.19.0 was valid for ZL,Z1,Z2,Z3,Z3c,Z3+/Z4,Z4Tablet,E4,E4G,M2,M4 because of new FSC feature added --> our device doesn't appear in the list so I think we have to wait for a little. It's my opinion...sorry for my bad english, I'll stay tuned for further information
Click to expand...
Click to collapse
Install Sony PC Companion and connect your Z5. Normally drivers should be installed now. There not included in Flashtool yet.
anyway I wanted to flash a stock firmware (since I'm branded). I've downloaded the firmware, created the ftf file with flashtool, downloaded the drivers ( with pc companion and also with the .exe inside the flashtool directory) but wen it asks for holding the volume down and plug the device it boots (as the problem the others has). Any Ideas? I've tried to hold the volume up and then plug the phone but it doesn't work, flashtool don't start the process
try flashing on a linux system.
I'll try (I have to find a pc running linux first) but I think that should be a problem of the device, I maen the buttons combinations seems inappropriated on this terminal since it restarts...It's my honest opinion (and I seize the moment to remember you of my bad english)
I had the same problem, for me trying it from linux (you can dual boot) fixed the problem. Must have been a problem with my windows installation.
Do you suggest to full wipe or not?
I didn't perform a full wipe and didn't have any problems.
I tried flashing phone with custom ROM ([ROM][XL] StryFlex™ Marshmallow v1.0 | Official Sony Xperia UI) .
But phone didn't boot for 2 hours and I removed the battery and tried to turn on but while pressing the power button , it keeps on vibrating for short time in certain intervals.
No Sony logo comes and No recovery menu pops up.
Also Sony companion also doesnot recognized the device. But Blue light keeps blinking while pressing Up + Power button while plugging in USB cable but nothing happens.
Try pressing volume up when plug in usb cable and see if blue led glows?
Yes It does.
Yeah , It does change into blue.
newguyknowsnothing said:
Try pressing volume up when plug in usb cable and see if blue led glows?
Click to expand...
Click to collapse
Does flashtool recognize the device?
Driver issues
No it doesnot , It says driver not found. In device manager it shows something s1boot device or something like that. I tried installing different drivers but didn't work out.
newguyknowsnothing said:
Does flashtool recognize the device?
Click to expand...
Click to collapse
kebib said:
No it doesnot , It says driver not found. In device manager it shows something s1boot device or something like that. I tried installing different drivers but didn't work out.
Click to expand...
Click to collapse
I think I had your problem once but I can't remember how I fixed it. I think it has something to do with windows updates, like you need to disabling it. I'm not sure, I hope it will help you. If not then there is nothing I can do.
kebib said:
No it doesnot , It says driver not found. In device manager it shows something s1boot device or something like that. I tried installing different drivers but didn't work out.
Click to expand...
Click to collapse
Try to use flashtool 0.9.11. And install drivers for "taoshan board". They are in the flashtool`s installation directory. If the blue led still flashes that means you connect it in flashmode which is a good thing.
Everytime I try to install the that driver , it says Install failed.
noobp said:
Try to use flashtool 0.9.11. And install drivers for "taoshan board". They are in the flashtool`s installation directory. If the blue led still flashes that means you connect it in flashmode which is a good thing.
Click to expand...
Click to collapse
Kindly Help me,
I was Flashing my Z3 by Flash Tool , i accidently select D6646 ftf file instead *of D6616 ftf , during flashing Flash Tool gives error at Kernal.sin and Phone goes Down,
No Soft or Hard Reset Work,
NO Flashmood / Fastboot Mood work ,
Flash Tool only Show
'Device connected with USB debugging off
19/021/2017 07:21:01 - INFO *- For 2011 devices line, be sure you are not in MTP mode
and Device Manager Shows SOMC Flash Drive,
When Connect By press Vol Down button and Attach USB Cable, USB not Recognized Error Shows*on Windows 7
I have TA backup from Flash Tool ( ie T1 and T2 ) before flashing in case of Partition break, where as
I realize its kernel brokeup
Kindly Plese Guide me what can I do to live my phone back
are you sure fastboot mode doesnt work? just power off and press vol+ and power if led is blue then you are is fastboot mode. then try to flash kernel.sin in adb command with pc . cheers
Yes sir sureonly red led show just for 2 3 sec n then goes off flash tool shows debugging mode off .. i disconnect battery to completly shut off phone after that i connect n same probelm
https://forum.xda-developers.com/showthread.php?t=2646405
xkeita said:
https://forum.xda-developers.com/showthread.php?t=2646405
Click to expand...
Click to collapse
ihad used that trick after whole day research , I can conclude S1tools does not support 2012 upgrade model, I received error as ID HASH IS NOT SUPPORTED,
however my bootloder is unlocked, and I hav unlocked code also, and also phone is rooted ,
Yes this could work for us as we still doesn't have the preloader dump.
AFAIK there is not unbricking way for now.
Somewhere I read that pc companion could work with Q9008. Also worth to try with emma.
I want working on this to finalize the unbricking guide but will not be soon as I need my device for the rom port. When done I will work on this unbricking.
Also it is not a kernel problem. Your flash replaced s1 bootloader with a wrong one.
Good luck a be patient
What about this: https://forum.xda-developers.com/showthread.php?t=1849170 ?
nailyk said:
Yes this could work for us as we still doesn't have the preloader dump.
AFAIK there is not unbricking way for now.
Somewhere I read that pc companion could work with Q9008. Also worth to try with emma.
I want working on this to finalize the unbricking guide but will not be soon as I need my device for the rom port. When done I will work on this unbricking.
Also it is not a kernel problem. Your flash replaced s1 bootloader with a wrong one.
Good luck a be patient
What about this: https://forum.xda-developers.com/showthread.php?t=1849170 ?
Click to expand...
Click to collapse
Thankq sir, for your reply so if its s1 bootloader then is it possible to bring my phone again live will u guide me what the next thing should i do
talharais said:
Thankq sir, for your reply so if its s1 bootloader then is it possible to bring my phone again live will u guide me what the next thing should i do
Click to expand...
Click to collapse
Sorry for confusing :s
I think, today, there is no way.
You can try with the official emma flash tool or pc companion but I really doubt.
nailyk said:
Sorry for confusing :s
I think, today, there is no way.
You can try with the official emma flash tool or pc companion but I really doubt.
Click to expand...
Click to collapse
Ohhh , sir i have TA backup still cant do anything and also charging also doesnot solve problem as mention in one of the xda thread
https://forum.xda-developers.com/showthread.php?t=1849170&page=1
talharais said:
Ohhh , sir i have TA backup still cant do anything and also charging also doesnot solve problem as mention in one of the xda thread
https://forum.xda-developers.com/showthread.php?t=1849170&page=1
Click to expand...
Click to collapse
Not related with TA backup for now. You change your bootloader with a wrong one.
It is almost like if you flash the wrong bios on your mother board. You can't flash it again until someone find an 'electronic' way.
Give a try with pc companion or emma.
nailyk said:
Not related with TA backup for now. You change your bootloader with a wrong one.
It is almost like if you flash the wrong bios on your mother board. You can't flash it again until someone find an 'electronic' way.
Give a try with pc companion or emma.
Click to expand...
Click to collapse
Pc companion is not reconize the fevice actually i explain what i idid,
I was flashing d6616 by flash tool
Firstly i unlock bootloder by sony , through unlock code they email then i rooted the device by kingo root n then flash accidently i chosse d6646 rom instead of d6616 rom then during flashing flashtool gives error at kernal.sin and after that device goesoff
When i plug into the pc it reconize my device as SOMC Flash device andflash tool gives dubugging off
Thats was the whole senrio by which my device brick so after whole story i really disappointed to know that my device is just use for paper weight... :crying:
I downloaded the emma after install it desnot show any usb device
You own a d6616? It have unlockable bootloader :s
Send it to repair center. No other choice.
And yes it is confusing, it say bootloader unlock after the fastboot command but it is not true.
@blackhawk_LA made some posts about D6616. Maybe he could help you.
I just post here to announce you the bad new your device is hardly softbricked.
nailyk said:
You own a d6616? It have unlockable bootloader :s
Send it to repair center. No other choice.
And yes it is confusing, it say bootloader unlock after the fastboot command but it is not true.
@blackhawk_LA made some posts about D6616. Maybe he could help you.
I just post here to announce you the bad new your device is hardly softbricked.
Click to expand...
Click to collapse
Service status shows unlock bootloader to yes.. well very thankful for you reply means there is no way to unbrick my phone
talharais said:
Service status shows unlock bootloader to yes.. well very thankful for you reply means there is no way to unbrick my phone
Click to expand...
Click to collapse
Keep an eye on https://forum.xda-developers.com/z3/devs-only/unbricking-d6603-t3365262
I just brick my device too so will try to make some progress on it
nailyk said:
Keep an eye on https://forum.xda-developers.com/z3/devs-only/unbricking-d6603-t3365262
I just brick my device too so will try to make some progress on it
Click to expand...
Click to collapse
Tanks buddy I am watching your thread, and also let me know when done,
Hi, I decided to post it here because it seems that anything I post on Xperia Ion forum is not read, it is inactive.
I already searched everywhere and I'm loosing my hopes. I'm trying to revive an Xperia Ion and this is what I get:
When I plug the phone in the wall charger the red led turns on for some minutes and then turns off.
The same happens when I plug on PC, when the led turns off it is detected as "Somc flash device" in windows device manager and this shows in flashtool:
INFO - Device connected with USB debugging off
INFO - For 2011 devices line, be sure you are not in MTP mode
Nothing changes if I plug in pc with volume + or - pressed, it don't goes into fastboot or flashmode.
I hope you could help me. Thanks
dude i have the same problem as yours i have a z3 d6643 and i made a mistake when downloading the kernal the device loads normal flash mode and flashtools working! power button + volume down runs twrp but it no longer starts at sony black screen someone please help!
evilhedrox said:
Hi, I decided to post it here because it seems that anything I post on Xperia Ion forum is not read, it is inactive.
I already searched everywhere and I'm loosing my hopes. I'm trying to revive an Xperia Ion and this is what I get:
When I plug the phone in the wall charger the red led turns on for some minutes and then turns off.
The same happens when I plug on PC, when the led turns off it is detected as "Somc flash device" in windows device manager and this shows in flashtool:
INFO - Device connected with USB debugging off
INFO - For 2011 devices line, be sure you are not in MTP mode
Nothing changes if I plug in pc with volume + or - pressed, it don't goes into fastboot or flashmode.
I hope you could help me. Thanks
Click to expand...
Click to collapse
Same problem with an XZ, someone has a solution?
sometime Win recognize the device as QUSB_BULK
Hi, my phone is dead (I think)...
No flashmode/fastboot, no boot, no any led after connecting to pc or anywhere (but pc show unrecognized device- LOL)
Device not recognized
Is there a way to fix it?
Someone help?:crying:
lets solve together
ok
submit post:fingers-crossed:
sbairayen2 said:
Hi, my phone is dead (I think)...
No flashmode/fastboot, no boot, no any led after connecting to pc or anywhere (but pc show unrecognized device- LOL)
Device not recognized
Is there a way to fix it?
Someone help?:crying:
lets solve together
ok
submit post:fingers-crossed:
Click to expand...
Click to collapse
Give us some further information. Was your bootloader unlocked? What was the last thing you did before it died?
Did you try to charge it using the wall plug?
St.Jimmy90 said:
Give us some further information. Was your bootloader unlocked? What was the last thing you did before it died?
Did you try to charge it using the wall plug?
Click to expand...
Click to collapse
It sounds to me like youve tried to flash it without the Google "flashmode" & "Fastboot" drivers installed and / or youve tried to use flashtool... instead of NewFlasher
Have you tried a "Repair" using Sony Companion?
As said above... we need more info..
Have you fixed your xz premium
Same as me.
My z5 died 2 years ago when flashing kernel from flashtool and pc turned off when flashing,
when flashing the kernel is not flashed flashed yill the end and i got anonymus driver when turning on pc and connectiong my phone.
Now no led and no boot and nothing.
Unrecognised driver.
thinking about selling my rooted xzpremium (dual sim). PM if you're interested in buying it.
Try Emma
hi everybody,
I left my phone charging in the night(it was on) and when i came to take it in the morning (it was off)... i tried to turn it on but it didn't turn on!
(IM USING ORIGINAL SONY CHARGER AND USB THAT CAME WITH IT)
when I plug it in to a charger the LED turns green (that means that the battery is at 90% or above)
i tried power and volume up (hard reset) but it didn't work!
when i connected to my computer it wasn't detected....(tried all USB ports)
Also, i tried to enter Flashmode and Fastboot mode.. and none of them worked!
Xperia companion didn't detect it....
I tried to turn it on several times but it didn't work!
i even tried all buttons combination (power, both volumes ) all together, and nothing worked!
PLEASE HELP ME!!!
please anyone have an idea or any suggestion that might help!
all your suggestions are so much appreciated!
THANK YOU VERY MUCH!
I used to be a bit similar to your situation, but its power indicator is not lit. Pressing other buttons did not respond. I also tried to connect it to the computer, but still didn't respond. I had no choice but to send it back to the after-sales service. The response I got was that the power IC was damaged.
Nidhal AKA the king said:
hi everybody,
I left my phone charging in the night(it was on) and when i came to take it in the morning (it was off)... i tried to turn it on but it didn't turn on!
(IM USING ORIGINAL SONY CHARGER AND USB THAT CAME WITH IT)
when I plug it in to a charger the LED turns green (that means that the battery is at 90% or above)
i tried power and volume up (hard reset) but it didn't work!
when i connected to my computer it wasn't detected....(tried all USB ports)
Also, i tried to enter Flashmode and Fastboot mode.. and none of them worked!
Xperia companion didn't detect it....
I tried to turn it on several times but it didn't work!
i even tried all buttons combination (power, both volumes ) all together, and nothing worked!
PLEASE HELP ME!!!
please anyone have an idea or any suggestion that might help!
all your suggestions are so much appreciated!
THANK YOU VERY MUCH!
Click to expand...
Click to collapse
doesnt seem like something that can be fixed on a software level, you need to send it to sony to fix it if youre under warranty.
Nidhal AKA the king said:
hi everybody,
I left my phone charging in the night(it was on) and when i came to take it in the morning (it was off)... i tried to turn it on but it didn't turn on!
(IM USING ORIGINAL SONY CHARGER AND USB THAT CAME WITH IT)
when I plug it in to a charger the LED turns green (that means that the battery is at 90% or above)
i tried power and volume up (hard reset) but it didn't work!
when i connected to my computer it wasn't detected....(tried all USB ports)
Also, i tried to enter Flashmode and Fastboot mode.. and none of them worked!
Xperia companion didn't detect it....
I tried to turn it on several times but it didn't work!
i even tried all buttons combination (power, both volumes ) all together, and nothing worked!
PLEASE HELP ME!!!
please anyone have an idea or any suggestion that might help!
all your suggestions are so much appreciated!
THANK YOU VERY MUCH!
Click to expand...
Click to collapse
Send it to sony service same thing happened for me and they gave me another phone.
Similar, but Sony do not want to know now
Blackghosthm said:
Send it to sony service same thing happened for me and they gave me another phone.
Click to expand...
Click to collapse
It's a long story, but bought an XZ from Toby Deals ( never ever use those rip off merchants ).
Decided not to want to turn on just before the year warranty ran out. Red flashing LED whilst charging, white Sony screen comes up, then goes off again, repeats ad infinitum. Obviously tried all the usual volume up/power button resets and this actually responds with the one buzz/three buzz response. Original charger and even a brand new battery - no change.
Didn't want to send back to Singapore, so tried Sony support who advised to send to Sony UK repair center.
I sent it in, came back as 'can't repair due to non UK model'.
Advised Sony on line support again, who promised me it would be looked at if sent in again.
Did that and they sent it back repaired and working ( no hardware ) - reflashed ?? Happy for three days.
Same thing happened after three days / same symptoms as before
Sent in again, sent back as 'non UK model' again. Started to cry
Informed Toby Deals who now don't want to know, as now a few moths past warranty expiry date.
Now I have a bricked expensive phone and have had since January. What a waste of money.
All I want to do, is whatever Sony UK repairers did in their factory.
No detection on PC and Companion either, which I feel is a big problem for any reflashing ideas.
Any ideas anybody please ?
Hammerheadz said:
It's a long story, but bought an XZ from Toby Deals ( never ever use those rip off merchants ).
Decided not to want to turn on just before the year warranty ran out. Red flashing LED whilst charging, white Sony screen comes up, then goes off again, repeats ad infinitum. Obviously tried all the usual volume up/power button resets and this actually responds with the one buzz/three buzz response. Original charger and even a brand new battery - no change.
Didn't want to send back to Singapore, so tried Sony support who advised to send to Sony UK repair center.
I sent it in, came back as 'can't repair due to non UK model'.
Advised Sony on line support again, who promised me it would be looked at if sent in again.
Did that and they sent it back repaired and working ( no hardware ) - reflashed ?? Happy for three days.
Same thing happened after three days / same symptoms as before
Sent in again, sent back as 'non UK model' again. Started to cry
Informed Toby Deals who now don't want to know, as now a few moths past warranty expiry date.
Now I have a bricked expensive phone and have had since January. What a waste of money.
All I want to do, is whatever Sony UK repairers did in their factory.
No detection on PC and Companion either, which I feel is a big problem for any reflashing ideas.
Any ideas anybody please ?
Click to expand...
Click to collapse
Your phone is still booting, so the boot partition is still ok.
Download newflasher.
Install the Sony ADB drivers, to do this you will need to boot your Windows10 into safe mode and use 'driver signing disabled'
Read up on Xperiafirm, download the latest firmware for your region.
Put a copy of the Newflasher into the firmware download folder.
Unplug your phone from the PC.
Turn your phone off completely Power and Vol up (+) until it vibrates three times.
Run the newflasher and when prompted, plug your phone back in while holding the Volume up (+). Once the process has started you can let go.
Good luck
If you see any led light , try to use pc companion ( if your phone is not unlocked ) and if you have unlocked bootloader try to use xperifix to download the latest software for your phone and then flash it using newflasher ( don't forget to have the Sony USB drivers on your computer ) pls tell us if it works to find another way to fix your smartphone.
Didgesteve said:
Your phone is still booting, so the boot partition is still ok.
Download newflasher.
Install the Sony ADB drivers, to do this you will need to boot your Windows10 into safe mode and use 'driver signing disabled'
Read up on Xperiafirm, download the latest firmware for your region.
Put a copy of the Newflasher into the firmware download folder.
Unplug your phone from the PC.
Turn your phone off completely Power and Vol up (+) until it vibrates three times.
Run the newflasher and when prompted, plug your phone back in while holding the Volume up (+). Once the process has started you can let go.
Good luck
Click to expand...
Click to collapse
Thanks for the info Didgesteve.
I am running through this now, but the firmware within Xperiafirm is a little light on the F8332 version ( dual sim ).
The single sim F8331 has lots more options including one for UK Virgin Mobile, which could be mine. The only other option for the 8332 is the Central Europe 1 CE1 option, which I don't think it is. Any advice please ? I am trying to find it on the Sony site, as @IgorEisberg states "XZ F8331 and F8332 are on the sony server now"
---------- Post added at 06:34 PM ---------- Previous post was at 06:33 PM ----------
Didgesteve said:
Your phone is still booting, so the boot partition is still ok.
Download newflasher.
Install the Sony ADB drivers, to do this you will need to boot your Windows10 into safe mode and use 'driver signing disabled'
Read up on Xperiafirm, download the latest firmware for your region.
Put a copy of the Newflasher into the firmware download folder.
Unplug your phone from the PC.
Turn your phone off completely Power and Vol up (+) until it vibrates three times.
Run the newflasher and when prompted, plug your phone back in while holding the Volume up (+). Once the process has started you can let go.
Good luck
Click to expand...
Click to collapse
Thanks for the info Didgesteve.
I am running through this now, but the firmware within Xperiafirm is a little light on the F8332 version ( dual sim ).
The single sim F8331 has lots more options including one for UK Virgin Mobile, which could be mine. The only other option for the 8332 is the Central Europe 1 CE1 option, which I don't think it is. Any advice please ? I am trying to find it on the Sony site, as @IgorEisberg states "XZ F8331 and F8332 are on the sony server now"
Hammerheadz said:
The only other option for the 8332 is the Central Europe 1 CE1 option,
Click to expand...
Click to collapse
It doesn't matter which region you have as long as the model number is the same, it's not locked to any language. The language can be chosen on start up, from a fresh install.
Central Europe 1 CE1 will be just fine.
Didgesteve said:
It doesn't matter which region you have as long as the model number is the same, it's not locked to any language. The language can be chosen on start up, from a fresh install.
Central Europe 1 CE1 will be just fine.
Click to expand...
Click to collapse
Thanks. I did think that, so went ahead anyway.
I think I have a connectivity problem. Nothing is showing in device manager, so cant add the drivers any other way can I?
Newflasher shows 'no USB device with vid:0x0fce pid 0xb00b !'
Hammerheadz said:
Thanks. I did think that, so went ahead anyway.
I think I have a connectivity problem. Nothing is showing in device manager, so cant add the drivers any other way can I?
Newflasher shows 'no USB device with vid:0x0fce pid 0xb00b !'
Click to expand...
Click to collapse
Did you install the drivers in 'safe mode'?
Hi. Yes I did. Still no joy, but I haven't tried since last time. I'll have another go this week, unless you can think of anything else it could be, or that I can try?
my xz premium reboots when I plug in charger. I will sell it and buy samsung ( i dont like it) before it dies completely lol
oh it was water in charging port, now all works perfectly
Didgesteve said:
Did you install the drivers in 'safe mode'?
Click to expand...
Click to collapse
Still no joy.
I am using Windows 10 and when I requested recovery reboot, it does give me a safe boot option ( option 5 I think ), but it also gives me a 'disable driver signing' option too and you can't opt for both.
I have actually tried to boot in both modes and the newflasher does the same thing - see attached screenshot
Not sure what more I can do, to get these drivers on. I have also run in developer mode and set USB device discovery to on, to no avail.
If device manager never sees the phone, how will I ever be able to install the drivers.
The newflasher, asks to install Gordongate and it doesn't matter if I select yes or no, it still says no usb device.
I am running newflasher from here :
C:\Xperia firmware\F8332_Customized CE1_1315-4550_41.3.A.2.171_R1E
...........but I have tried to run it from the driver folder too.
I am stuck. If I can send it to you, please PM me !
:fingers-crossed:
Hammerheadz said:
Still no joy.
I am using Windows 10 and when I requested recovery reboot, it does give me a safe boot option ( option 5 I think ), but it also gives me a 'disable driver signing' option too and you can't opt for both.
I have actually tried to boot in both modes and the newflasher does the same thing - see attached screenshot
Not sure what more I can do, to get these drivers on. I have also run in developer mode and set USB device discovery to on, to no avail.
If device manager never sees the phone, how will I ever be able to install the drivers.
The newflasher, asks to install Gordongate and it doesn't matter if I select yes or no, it still says no usb device.
I am running newflasher from here :
C:\Xperia firmware\F8332_Customized CE1_1315-4550_41.3.A.2.171_R1E
...........but I have tried to run it from the driver folder too.
I am stuck. If I can send it to you, please PM me !
:fingers-crossed:
Click to expand...
Click to collapse
Windows10, boot into safe mode, choose 'disable driver signing' in the advanced menu, start the computer and install the Sony drivers. If that doesn't work, answering yes to the first question in Newflasher creates a new drivers zip folder within the Newfalsher folder. Install these drivers, again with driver signing disabled.
When you put the phone into flash mode and plug it in to your PC, what does it say in the device manager?
Didgesteve said:
Windows10, boot into safe mode, choose 'disable driver signing' in the advanced menu, start the computer and install the Sony drivers. If that doesn't work, answering yes to the first question in Newflasher creates a new drivers zip folder within the Newfalsher folder. Install these drivers, again with driver signing disabled.
When you put the phone into flash mode and plug it in to your PC, what does it say in the device manager?
Click to expand...
Click to collapse
Thanks for your reply Didgesteve.
I installed the drivers by installing the sa0115adb.inf successfully, but as the phone is continuously cycling through a 'Sony' white screen and blank screen ( frequency 3secs of each ), device manager does not seem to 'see' anything at all.
I also installed the ggsommc.inf driver, when prompted and answered as a 'ye's for the GordonGate option. It didn't give me a failure message, but also didn't state 'installed successfully' as the sa0115adb one did.
I also tried another generic driver called android_winusb.inf to no avail.
Hammerheadz said:
Thanks for your reply Didgesteve.
I installed the drivers by installing the sa0115adb.inf successfully, but as the phone is continuously cycling through a 'Sony' white screen and blank screen ( frequency 3secs of each ), device manager does not seem to 'see' anything at all.
I also installed the ggsommc.inf driver, when prompted and answered as a 'ye's for the GordonGate option. It didn't give me a failure message, but also didn't state 'installed successfully' as the sa0115adb one did.
I also tried another generic driver called android_winusb.inf to no avail.
Click to expand...
Click to collapse
Try to use pccompanion sorry if I'm late
PC companion is no good, as the device can't been seen by windows or that app. I was wondering what the Sony uk repair centre used the last time they repaired it. Wish they would again !!
Hammerheadz said:
PC companion is no good, as the device can't been seen by windows or that app. I was wondering what the Sony uk repair centre used the last time they repaired it. Wish they would again !!
Click to expand...
Click to collapse
Not at all it's like newflasher