Database Info

[Completed] question about my nexus 6's drivers

When I connected my phone to the computer for the first time it said it was installing device drivers. When connected to unlock the boot loader however. It will say charging but continue to say connect USB. And I check device manager it tells me there are no drivers to install and that there are none on my phone? So very frustrated. Does anyone know why this is happening?
Nexus 6 software version 5.0.1

Hi
Thank you for using XDA Assist.
Check this thread for help regarding drivers.
http://forum.xda-developers.com/nexus-6/general/how-to-nexus-6-one-beginners-guide-t2948481
For more help , sign up on XDA and post in the thread below
http://forum.xda-developers.com/nexus-6/general/nexus-6-ota-help-desk-t2992919
Have a good day !

[Completed] Xperia p cwm installation

Hello.. My xperia P phone has usb problem it does not connect to any computer, USB is almost dead only charging works. I unlocked the boot loader but could not install cwm recovery mode. Is there any way to install CWM without USB connection? I tried installing using busy box and root browser but not sure about the files whether it was compatible.. The root checker shows the phone is unrooted but it shows unlocked when *#*#7378423#*#* service test used......
please correct me if any thing went wrong, I am just a beginner.
thank you

XDA Visitor said:
Hello.. My xperia P phone has usb problem it does not connect to any computer, USB is almost dead only charging works. I unlocked the boot loader but could not install cwm recovery mode. Is there any way to install CWM without USB connection? I tried installing using busy box and root browser but not sure about the files whether it was compatible.. The root checker shows the phone is unrooted but it shows unlocked when *#*#7378423#*#* service test used......
please correct me if any thing went wrong, I am just a beginner.
thank you
Click to expand...
Click to collapse
Hello.
Thank you for using XDA Assist.
First, please create an account so you can post in other forums.
http://forum.xda-developers.com/showthread.php?t=1699450
After creating your account, please visit the main forum area for your device:
http://forum.xda-developers.com/xperia-u
Your questions should be posted here:
http://forum.xda-developers.com/xperia-u/issues/faqs-help-thread-newbies-post-t1983938
Good luck!

[Completed] Moto G XT1033 won't connect to PC via USB or charge, bricked?

I'd installed Cyannogenmod 12.1 and all was well, then I won't on to install the eXPerience kernel, and my device stopped connecting to my PC, won't charge either. The bootloader however manages to connect to my PC but ADB commands don't work. (Says i Any way I can get a backup I made earlier on my PC into the phone? (Battery's almost dead, I guess nothing much can be done? )

Hello,
Welcome to XDA.
In order to assist you further, please post your question in the link below.
http://forum.xda-developers.com/moto-g/help
The experts there will help you. Remember to create an XDA account so you can post and reply in the forums. Good luck.

[Completed] MTK Preloader Isn't Showing Up in Device Manager

I have a Digicel DL750. I understand that it is an Alcatel Pop C3 upgraded to a KitKat.
My phone is hard bricked. I followed the procedures to connect it to the PC whilst off and without battery. Nothing happens. No connecting sound on my PC... until I hold the power, volume up and volume down buttons.
My sister has the same phone. Hers connect whilst off and without battery. I even see the MTK Preloader in the device manager, so her phone connected successfully. For me what shows up is Alcatel Mobile Phones (COM5).
I have the stock ROM, but it's for installing via recovery. I have the Sp Flash Tool-ready files to flash unto the device.
I just need the phone to connect like it should. Can you assist me?

MarHutchy said:
I have a Digicel DL750. I understand that it is an Alcatel Pop C3 upgraded to a KitKat.
My phone is hard bricked. I followed the procedures to connect it to the PC whilst off and without battery. Nothing happens. No connecting sound on my PC... until I hold the power, volume up and volume down buttons.
My sister has the same phone. Hers connect whilst off and without battery. I even see the MTK Preloader in the device manager, so her phone connected successfully. For me what shows up is Alcatel Mobile Phones (COM5).
I have the stock ROM, but it's for installing via recovery. I have the Sp Flash Tool-ready files to flash unto the device.
I just need the phone to connect like it should. Can you assist me?
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Try asking over here:
Good luck!

nilac said:
Hi and thank you for using XDA Assist
Try asking over here:
Good luck!
Click to expand...
Click to collapse
Apparently I need 10 posts.

MarHutchy said:
Apparently I need 10 posts.
Click to expand...
Click to collapse
Answer a bit in the general threads around the forum till you get 10 posts count.
Regards

nilac said:
Answer a bit in the general threads around the forum till you get 10 posts count.
Regards
Click to expand...
Click to collapse
Okay. Will do.

[Completed] How to unbrick Xperia S lt26i [not a noob]

I have a Xperia S running cm 12.1 with unlocked bootloaders TWRP installed and i tried to partition my SD card [http://forum.xda-developers.com/showthread.php?t=2584759] but clearly something went wrong and now the phone wont boot. I made a lot of research and tried everything but all the guides require to be able to boot into flashmode . My phone is dead the only sign of life is a red led when its charging which after some hours of charge will shut off. When the light is off and the phone connected on PC, the PC can recognize the device on unspecified devices (QHSUSB_DLOAD). i have installed all the needed drivers from Sony, google drivers from sdk, and adb drivers(adb wont see the device and i tried everything to do so, but nothing seem to work). I got a market for android on my pc called mobogenie that when i connect the phone it detects that a phone is connected but wont see what phone.The hardware reset buttons work but its useless in the current position. Concluding, the phone is bricked and wont open in fastboot-flashboot-bootloader-TWRP, its recognized as a device but not as "Xperia s" i got all the drivers and i want to flash the original firmware (already downloaded) to fix it. A possible problem is that the partition table is destroyed and after the flash it will hopefully be restored. The problem is not on the hardware but on software. I tried to trigger the download mode with the Samsung way (USB jig, 300k ohm ) but nothing happened as expected. Every solution i found required flash mode which is not accessible at the moment and i tried lots of things to go into fastboot(ever the rubber band trick,remove the battery etc). PLEASE help i dont know what to do, please help me flash it (i already got flashtool, Emma) or anohter solution. Thanks for the help in advance. (its my first thread in the forum, i hope to post it on the right section, i posted it here because i need the assistance of the developers i guess)

Hello,
Welcome to XDA.
The XDA Assist forum isn't what you think it is. We merely assist by helping to point users with issues in the right direction for their issue.
Try posting your question in the forum linked below.
http://forum.xda-developers.com/xperia-s/help?nocache=1&z=2025285740382969
The experts there may be able to help.
Register an XDA account to post and reply in the forums.