I think my phone has been hard-bricked, as it will not turn on whatsoever after I installed an xposed framework. However when I plug it into my computer, the USB sound plays, indicating a USB devices has been plugged in. My phone does not show up on ADB or Fastboot however. Does this mean all hope is lost still?
My phone is a Huawei Y625 running on Firmware U43
OrewaHighNoon said:
I think my phone has been hard-bricked, as it will not turn on whatsoever after I installed an xposed framework. However when I plug it into my computer, the USB sound plays, indicating a USB devices has been plugged in. My phone does not show up on ADB or Fastboot however. Does this mean all hope is lost still?
My phone is a Huawei Y625 running on Firmware U43
Click to expand...
Click to collapse
Greetings and welcome to xda, I found this thread here which may fix your issue
http://forum.xda-developers.com/android/help/huawei-y625-u32-hard-brick-problem-t3463940
Good luck
Sawdoctor
sawdoctor said:
Greetings and welcome to xda, I found this thread here which may fix your issue
http://forum.xda-developers.com/android/help/huawei-y625-u32-hard-brick-problem-t3463940
Good luck
Sawdoctor
Click to expand...
Click to collapse
You see, the issue is my phone won't turn on whatsoever.
And that tutorial requires that my phone is powered on to install the flashify apk.
OrewaHighNoon said:
You see, the issue is my phone won't turn on whatsoever.
And that tutorial requires that my phone is powered on to install the flashify apk.
Click to expand...
Click to collapse
I'm sorry about that, I am not familiar with your device. If you ask your question here
http://forum.xda-developers.com/android/help
hopefully the experts there can help you
Good Luck
Sawdoctor
Related
Guys , I am using HTC Desire U Dual Sim Android Phone. Yesterday it suddenly crashed and when i tried to power on, it stuck at bootloader screen where fastboot,recovery,etc. option are present. Even after a reboot it ends up at same location. I tried flashing rom using pc, but device is not recognized. It might be because USB Debugging is disabled. So in short , I am stuck in a deadlock here. Anyone has any solution regarding this..
Hello
Welcome to XDA Assist
USB debugging is for enabling adb and is not related to detection issues.
You can try flashing firmware on some other PC which might detect your device
Have a good day !
karandpr said:
Hello
Welcome to XDA Assist
USB debugging is for enabling adb and is not related to detection issues.
You can try flashing firmware on some other PC which might detect your device
Have a good day !
Click to expand...
Click to collapse
Actually Its not even working on other PCs . Do you think flashing will solve this BIOS problem ..
manoj1994 said:
Actually Its not even working on other PCs . Do you think flashing will solve this BIOS problem ..
Click to expand...
Click to collapse
Yes , it will. If the OS gets corrupted then bootloop to recovery is common. Which is happening in your case .
karandpr said:
Yes , it will. If the OS gets corrupted then bootloop to recovery is common. Which is happening in your case .
Click to expand...
Click to collapse
Sir,
I have installed new firmware but still it ends up at boot menu on reboot ...
manoj1994 said:
Sir,
I have installed new firmware but still it ends up at boot menu on reboot ...
Click to expand...
Click to collapse
Have you unlocked your bootloader ?
If you have , you can try methods in this thread
http://forum.xda-developers.com/showthread.php?t=2607409
Else you would have to take it to your care center ,mobile repair shop.
Lately i ve been having issues transfering files via USB to my Moto G 1st Gen (XT1034), so i looked through the web and i found out that if i changed my rom maybe i could fix it, so i decided to update my Moto G to Android 5.0 using Cyanogenmod 12, but i accidentally flashed a cwm version built for 2nd Gen Moto G and installed a rom built for 2nd Gen too that i had previously downloaded. After flashing and installing the rom it just bootlooped and now i cant transfer a Moto G 1st Gen rom to fix it!!! I ve tryed adb but i got "error: device not found", i ve also tryed manually installing those android USB drivers from a youtube video (Called How to Copy Files Over to your Android In a Bootloop with No OS using ADB!) but when i select the inf file i get a message telling me that those drivers are not supported on my 64 bit system.
Help me please im freaking out.
Hi, thank you for using XDA Assist. It sounds to me like you need to return your device to stock at this point. See if this helps, http://forum.xda-developers.com/showthread.php?t=2542219 Check Motorola's web sit to see if you can find the firmware there. If not, see if anyone here can help, http://forum.xda-developers.com/moto-g/help Just make sure the firmware you download is for your specific model number.
Don't forget to register on XDA to ask questions in that forum.
Good luck!
jd1639 said:
Hi, thank you for using XDA Assist. It sounds to me like you need to return your device to stock at this point. See if this helps, http://forum.xda-developers.com/showthread.php?t=2542219 Check Motorola's web sit to see if you can find the firmware there. If not, see if anyone here can help, http://forum.xda-developers.com/moto-g/help Just make sure the firmware you download is for your specific model number.
Don't forget to register on XDA to ask questions in that forum.
Good luck!
Click to expand...
Click to collapse
Thank you for replying. I ve already checked that, but i didnt tryed it because the files were uploaded to filefactory and it would take 2 hours to download the file, but it guess i ll just have to wait for it. My biggest problem is that adb isnt recognizing my device and i dont know how to fix it.
OK, try this. With your device connect to you PC via USB go into device manager. Do you see an icon with a yellow exclamation mark? If so right click and go to where it lets you chose from a driver from a list on your computer. Chose the Android composite ADB interface,
jd1639 said:
OK, try this. With your device connect to you PC via USB go into device manager. Do you see an icon with a yellow exclamation mark? If so right click and go to where it lets you chose from a driver from a list on your computer. Chose the Android composite ADB interface,
Click to expand...
Click to collapse
It appears as it is already installed, but my pc still doesnt recognize it
The only other thing I can tell you is see if this helps, http://forum.xda-developers.com/goo...nosing-usb-driver-adb-issues-windows-t2514396 Also try different usb ports and cables.
jd1639 said:
The only other thing I can tell you is see if this helps, http://forum.xda-developers.com/goo...nosing-usb-driver-adb-issues-windows-t2514396 Also try different usb ports and cables.
Click to expand...
Click to collapse
Thanks for everything. Someone is helping me in the Moto G section that seems to know how to fix it. About the USB driver issues, i ve tryed everything explained in that thread
I'm glad you're getting the help you need. I'll close this thread then.
I have a Digicel DL750. I understand that it is an Alcatel Pop C3 upgraded to a KitKat.
My phone is hard bricked. I followed the procedures to connect it to the PC whilst off and without battery. Nothing happens. No connecting sound on my PC... until I hold the power, volume up and volume down buttons.
My sister has the same phone. Hers connect whilst off and without battery. I even see the MTK Preloader in the device manager, so her phone connected successfully. For me what shows up is Alcatel Mobile Phones (COM5).
I have the stock ROM, but it's for installing via recovery. I have the Sp Flash Tool-ready files to flash unto the device.
I just need the phone to connect like it should. Can you assist me?
MarHutchy said:
I have a Digicel DL750. I understand that it is an Alcatel Pop C3 upgraded to a KitKat.
My phone is hard bricked. I followed the procedures to connect it to the PC whilst off and without battery. Nothing happens. No connecting sound on my PC... until I hold the power, volume up and volume down buttons.
My sister has the same phone. Hers connect whilst off and without battery. I even see the MTK Preloader in the device manager, so her phone connected successfully. For me what shows up is Alcatel Mobile Phones (COM5).
I have the stock ROM, but it's for installing via recovery. I have the Sp Flash Tool-ready files to flash unto the device.
I just need the phone to connect like it should. Can you assist me?
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Try asking over here:
Good luck!
nilac said:
Hi and thank you for using XDA Assist
Try asking over here:
Good luck!
Click to expand...
Click to collapse
Apparently I need 10 posts.
MarHutchy said:
Apparently I need 10 posts.
Click to expand...
Click to collapse
Answer a bit in the general threads around the forum till you get 10 posts count.
Regards
nilac said:
Answer a bit in the general threads around the forum till you get 10 posts count.
Regards
Click to expand...
Click to collapse
Okay. Will do.
Hi!
First of all, I'm sorry for my English...
I have unlocked and rooted my device (Huawei P9 lite).
I have install the TWRP bootloader and I tried to install a new costum ROM, but my device was turned off and never opened again. (Maybe: Low battery).
I try to charge my device but it didn't recognize the charger. So, I removed the battery from device (with the help of a technician) and charging it.
After all, I tried again to root and install TWRP but the device doesn't open or recognized of my PC...the only thing to do is to be recognized by the PC in fastboot mode but not allowing me to do something in the command window.
What am I doing?
Vangeliskar1 said:
Hi!
First of all, I'm sorry for my English...
I have unlocked and rooted my device (Huawei P9 lite).
I have install the TWRP bootloader and I tried to install a new costum ROM, but my device was turned off and never opened again. (Maybe: Low battery).
I try to charge my device but it didn't recognize the charger. So, I removed the battery from device (with the help of a technician) and charging it.
After all, I tried again to root and install TWRP but the device doesn't open or recognized of my PC...the only thing to do is to be recognized by the PC in fastboot mode but not allowing me to do something in the command window.
What am I doing?
Click to expand...
Click to collapse
Greetings and welcome to assist. It looks like you already found the correct forum to ask your question
http://forum.xda-developers.com/showthread.php?t=3488580
so I'll close this one up
Good Luck
Sawdoctor
I have all of the lg and google drivers correctly installed. However, everytime I put the phone into the bootloader mode it disconnects from my computer before I can input the oem bootloader command.
XDA Visitor said:
I have all of the lg and google drivers correctly installed. However, everytime I put the phone into the bootloader mode it disconnects from my computer before I can input the oem bootloader command.
Click to expand...
Click to collapse
Greetings and welcome to assist. I found this thread that may be helpful
http://forum.xda-developers.com/v20/help/adb-recognizing-device-t3521608
why not make an account and the experts there will help you
Good Luck
Sawdoctor