Database Info

Yoobao TPU+PC Case Review

Hi guys, I just wanted to give my review on the case that I've finally settled on! It took me forever to finally decide on a case, but I finally made my choice and I couldn't be happier. I originally had the Silicone case from the T-Mobile store, but that case just wasn't to my liking.
Up first is the link: http://www.ebay.com/itm/YOOBAO-TPU-case-Skin-Cover-HTC-Sensation-4G-Z710e-/220837531137?pt=PDA_Accessories&hash=item336af14e01
Nice price for a high quality case for sure. Item took me 9 days to get from the time I ordered it, which isn't at all bad considering it ships from Hong Kong and I'm in California.
The breakdown: this is a lightweight case (AKA not a competitor to the Case Mate Tough and similar heavy-duty cases) that is made out of 2 materials. It is both TPU and Polycarbonate (plastic). The parts that are plastic are where the 2 wedge-shaped pieces on the back of the phone are (above and below the swoosh).
My review: my primary reason for getting a new case was because the T-Mobile gel case was too loose. It felt like a pair of baggy pants on a skinny kid (Take it from a skinny person that that feeling is really uncomfortable). First up is the packaging:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice packaging, comes with a screen protector and cloth inside (I haven't put the screen protector on yet so I'll report on that later). The most noticeable things about the packaging are the comical errors in grammar and spelling, but I couldn't care less about that when I like the product .
I read good things about TPU cases being much tighter than Silicone, and the Yoobao case is certainly a good example of that. Out of the box, it is much more resistant to flexing and takes a bit of an effort to actually put the phone into. BIG plus for me. It's very form fitting and tight on the phone. It's also a thin case, which was instantly noticeable because in the hand it feels more like a naked Sensation than the T-Mob case did. That's not to say it provides no protection, because the combination of TPU and PC makes it feel quite strong for a thin case. Also, let's be honest that most people looking for thin TPU cases aren't looking for the most hardcore in protection. I'm sure the Yoobao will do fine in minor drop situations.
The cutouts on this case are close to perfection.
The headphones jack is fine for the headphones I use. It's about the same size that the cutout on the T-Mob case is.
The cutouts on the top half. As you can see, Yoobao included cutouts for every place where they are needed. 2 things I really like here: the first, that the cutouts are perfectly placed (the mic holes are perfectly centered in each cutout, which is rare), the second, that there is a separate cutout for the camera and the flash. Most cases have one big hole for both the camera and the flash, and the fact that this has individual cutouts exudes quality.
Cutouts at the bottom. This is a pretty bad picture because the mic holes are better centered than the pic makes it look like. Again, nice that they have individual cutouts.
Terrible picture, I know, but I just wanted to show that even the bottom mic hole has a cutout (which like the others is perfectly aligned).
This is the ONLY thing I don't like about the case. While (looking at the cutout from this orientation) the left and right sides of the cutout provide plenty of space, the top part is just barely too thick.
As you can see from the bump, it's just a little too tight for the charger. It's still easy to get the charger in, it's just that it pushes the TPU up right there.
It's a very minor issue, and I'm sure you could easily take a knife to it to make it fit better. This is legitimately the only thing I would change about this case.
The looks:
The looks of this case were probably the main reason I chose it over others. I personally wanted a light case that preserves the looks of the naked Sensation as much as possible, and I don't think you can do any better than this case. I obviously went with the black model, but there is also a white model. The TPU is translucent, and in decent light the case is a dark smoked color (it's really only in low light that it looks completely black). Really sexy color, and it's awesome that you can see the htc logo on the back. The other main case I looked at was the Qubits one that is very popular, but I liked how the Yoobao allows you to see the actual swoosh and htc on the back, rather than an opaque black swoosh that merely imitates the phone. The plastic pieces are so well done that they look just like the phone underneath.
I thought that this picture demonstrated how smooth the transition is from PC to TPU. It's really only a transition that you can feel; you can't see it because it's so smooth.
Other things to note:
The TPU comes up over the lip around the phone like most cases do. It's thin, so when you place the phone face down the screen is just barely off the surface. I didn't include this as a negative thing because I don't have any personal experiences with other cases other than the T-Mob one (which definitely does provide a bigger lip), and I've also heard that TPU cases don't give as much a lip as Silicone cases do.
The power button is harder to press down, but I also didn't include this as a negative because I've heard the same about many TPU cases. The volume rocker also takes a little bit more effort. Both of them are covered by clear TPU that isn't smoked, so it's kinda cool that they are showing off the metal pieces on the phone.
It's not as grippy as a pure silicone case because it can slide around a bit on the plastic parts. I personally think it's grippy enough and enjoy how easy it is to slide in my pants.
Summary: this case is about as good as a lightweight case can get. If you aren't looking for hardcore protection, I absolutely recommend the Yoobao case. It looks great, feels great, adds minimal bulk, fits tightly, and has near-perfect cutouts. IMO no other case out there does a better job of preserving the Sensation's design, and no other case can match how well done the cutouts other than the USB cutout are. I might buy another one just to have an extra because I like it so much. If you have any questions, feel free to let me know.

It's just like any other tpu "twill design" cases. It's just branded that's all.
Nice review. I got one that is unbranded. Don't use it no more.

nicky041192 said:
It's just like any other tpu "twill design" cases. It's just branded that's all.
Nice review. I got one that is unbranded. Don't use it no more.
Click to expand...
Click to collapse
Actually its not, yeah, it might be kind of similar but imo this design is much better. The twill design does go over the top and bottom of the phone
Sent from my Sensation using XDA App

Xcor3 said:
Actually its not, yeah, it might be kind of similar but imo this design is much better. The twill design does go over the top and bottom of the phone
Sent from my Sensation using XDA App
Click to expand...
Click to collapse
Ahh just noticed the difference. The matte covers the top and the bottom where the Yoobao doesn't.
Does the screen protector cover the whole front glass? or just he visible screen?

Sorry to hijack your thread but I do have a white one for sale for weeks but one person asked about it and never followed through. The one I have was never used. I just put it on for testing purposes, but ended up not using it. The fs thread is in the marketplace here or you can PM me for details. I don't want to detract the thread by posting pics and such .
Back to topic...
Great detailed review my friend!

can't link yet, but go to amazon.com and type in "HTC SENSATION 4G / SENSATION XE GEL SKIN CASE"
is this suppose to be the same case??

I just got these case myself last week. I love the fact that it fits inside my OEM HTC Leather case. I had to apply little shoe stretch on the sides. But the phone fits perfectly. I was considering the expensive Seidio case and holster...but the Yoobao TPU & Screensaver and the OEM leather case were a great deal at about $20 shipped total on ebay.

nicky041192 said:
Ahh just noticed the difference. The matte covers the top and the bottom where the Yoobao doesn't.
Does the screen protector cover the whole front glass? or just he visible screen?
Click to expand...
Click to collapse
Not sure what you're talking about. The Yoobao case covers the top and bottom just like any other case (it wraps around the front at all sides, providing a lip around the whole phone just like most other cases). And I haven't tried the screen protector yet.

Great Review!
I actually was considering this case, but the Yoobao was a big turn off for me. Has anyone found a way to cover up/scratch it off?

I am sure Goof off would take it off.
Sent from my HTC Sensation 4G using Tapatalk

Fr3sh2De4th said:
Great Review!
I actually was considering this case, but the Yoobao was a big turn off for me. Has anyone found a way to cover up/scratch it off?
Click to expand...
Click to collapse
buy one without yooboo on it. search for 'twill gel case'

I must add something, the screen protector that comes with this Yoobao cover fits the screen a 100% and with a little heat and dust free environment applies perfectly.
I just receive mine today and quickly put the OtterBox Commuter in my drawer.
I must thanks the OP, this is an awesome purchase.

This case is awesome. Thanks OP for the find!

cmarti said:
I must add something, the screen protector that comes with this Yoobao cover fits the screen a 100% and with a little heat and dust free environment applies perfectly.
I just receive mine today and quickly put the OtterBox Commuter in my drawer.
I must thanks the OP, this is an awesome purchase.
Click to expand...
Click to collapse
I know I said I was going to do an update when I installed the screen protector; obviously I put that off for a long time. Anyways I did install it and it's exactly like you describe. Applied incredibly easily, no bubbles, fits perfectly, and it even has a little bit of a cutout for the light sensor. Awesome screen protector to complement an equally awesome case.
Just wanted to give this a little bump to update and for others to see this review who haven't yet.

I bought this case; did anyone try removing the yoobao logo with goo-off? if not, i'll guess i'll be the 1st one to try since i bought a clear(white) case and have a white beats back case to go with it....

KingP1n said:
I bought this case; did anyone try removing the yoobao logo with goo-off? if not, i'll guess i'll be the 1st one to try since i bought a clear(white) case and have a white beats back case to go with it....
Click to expand...
Click to collapse
I've had past success with goo gone. The goo off is the more paint thinner smelling than the goo gone right? I recently took off the Aprolink logo from my hybrid case.
The goo gone is the one that smells like citrus. I use that stuff to take off adhesives from car finishes as well.

Galaxy S4 SPIGEN SGP Bounce Review

If you're looking for an ultra-thin TPU case for your brand new Galaxy S4, look no further. The SPIGEN SGP Bounce is the thinnest TPU case I've ever had. Although the somewhat sparkly back isn't for everyone, I believe it adds a little design flare that separates it from the sea of bland cases. It can be yours for only $10.99.
Stay tuned, we will be giving this case away this week!

Nice review. Do you have access to any other Spigen cases for the S4 other than this one and the Ultra Fit?
Sent from my iPad using Tapatalk HD

I'm confused...
Is the Bounce the same as the Ultra Capsule?

I purchased this case and received it today. I do not recommend it at all, I'll be returning mine as soon as I can get a different case.
Cons:
-- It's mentioned in the review above, but the case is loose on the S4, mine's so loose that the lip comes off the front face of the device fairly easily.
-- The seams around the case aren't smooth, feels cheap.
-- Slippery back, as slippery as the default plastic on the device.
Pros:
-- Slim, doesn't add much to the device.
-- Cutouts seem well positioned, including the IR blaster hole.
The pros don't really outweigh the con of the case not actually staying on the device.

jtc276 said:
Nice review. Do you have access to any other Spigen cases for the S4 other than this one and the Ultra Fit?
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
We ordered at least two more SPIGEN cases, but they won't be in stock until the end of April or beginning of May.
da_hool said:
I'm confused...
Is the Bounce the same as the Ultra Capsule?
Click to expand...
Click to collapse
The only difference I see is that the Ultra Capsule includes a screen protector and Jelly Bean Button(whatever that is). The site also states that the Ultra Capsule is shock absorbent, while the Amazon description for the Bounce does not. Oh, and the Ultra Capsule is $24.99 verses $10.99 for the Bounce.
We will review both cases.
jonsoini said:
I purchased this case and received it today. I do not recommend it at all, I'll be returning mine as soon as I can get a different case.
Cons:
-- It's mentioned in the review above, but the case is loose on the S4, mine's so loose that the lip comes off the front face of the device fairly easily.
-- The seams around the case aren't smooth, feels cheap.
-- Slippery back, as slippery as the default plastic on the device.
Pros:
-- Slim, doesn't add much to the device.
-- Cutouts seem well positioned, including the IR blaster hole.
The pros don't really outweigh the con of the case not actually staying on the device.
Click to expand...
Click to collapse
Is the primary mic cutout off center?

AndroidFanNetwork said:
If you're looking for an ultra-thin TPU case for your brand new Galaxy S4, look no further. The SPIGEN SGP Bounce is the thinnest TPU case I've ever had. Although the somewhat sparkly back isn't for everyone, I believe it adds a little design flare that separates it from the sea of bland cases. It can be yours for only $10.99.
Stay tuned, we will be giving this case away this week!
Click to expand...
Click to collapse
Is this thicker or thinner than the ultra fit?
What is the thinnest gs4 case you have reviewed so far?
Sent from my SAMSUNG-SGH-I747

phositadc said:
Is this thicker or thinner than the ultra fit?
What is the thinnest gs4 case you have reviewed so far?
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
Honestly, they're both about the same thickness. These two would be the thinnest cases so far.
The Bounce weighs 0.6 of an ounce and the Ultra Fit 0.5.

AndroidFanNetwork said:
Honestly, they're both about the same thickness. These two would be the thinnest cases so far.
The Bounce weighs 0.6 of an ounce and the Ultra Fit 0.5.
Click to expand...
Click to collapse
So both are thinner than diztronic, cruzerlite, etc?
Sent from my SAMSUNG-SGH-I747

phositadc said:
So both are thinner than diztronic, cruzerlite, etc?
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
Correct. I have a Diztronic case on my desk that I'll be reviewing within the next few days, and I can say with certainty that the SPIGEN cases are thinner.

I have the white version of this case for when my phone arrives early next week. I hope it is not too loose like you've mentioned! Looks very nice as a case all in all.

The mic cutout on mine is right on center, no issues there.

UPDATE: I've had this case on my phone for one day (less than 24 hours). It has rubbed the silver paint off ~30% of the front rim of my phone. STAY AWAY from this case unless you want the silver paint on your phone rubbed off. If I can I'll post pics later. My brand new phone was pristine until this case. Bummer.

jonsoini said:
UPDATE: I've had this case on my phone for one day (less than 24 hours). It has rubbed the silver paint off ~30% of the front rim of my phone. STAY AWAY from this case unless you want the silver paint on your phone rubbed off. If I can I'll post pics later. My brand new phone was pristine until this case. Bummer.
Click to expand...
Click to collapse
Any pics?

jonsoini said:
UPDATE: I've had this case on my phone for one day (less than 24 hours). It has rubbed the silver paint off ~30% of the front rim of my phone. STAY AWAY from this case unless you want the silver paint on your phone rubbed off. If I can I'll post pics later. My brand new phone was pristine until this case. Bummer.
Click to expand...
Click to collapse
I knew that chrome dipped plastic lip would be a problem. If a TPU case is a problem already, I have a feeling any hard snap case will chew up the bezel pretty good.

jonsoini said:
UPDATE: I've had this case on my phone for one day (less than 24 hours). It has rubbed the silver paint off ~30% of the front rim of my phone. STAY AWAY from this case unless you want the silver paint on your phone rubbed off. If I can I'll post pics later. My brand new phone was pristine until this case. Bummer.
Click to expand...
Click to collapse
Pics would be very useful

jonsoini said:
UPDATE: I've had this case on my phone for one day (less than 24 hours). It has rubbed the silver paint off ~30% of the front rim of my phone. STAY AWAY from this case unless you want the silver paint on your phone rubbed off. If I can I'll post pics later. My brand new phone was pristine until this case. Bummer.
Click to expand...
Click to collapse
Pics please!

Pics of the damage
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 09:11 PM ---------- Previous post was at 09:07 PM ----------

Dude..no...way... that's terrible. Sorry to see that...

+1 , you need to go to Samsung. This device has been out mere days.

xdacommenter said:
Dude thats BAD. No way the case did that though. That has to be a manufacturing issue. Unless you got a defect Samsung is in for some trouble.
Click to expand...
Click to collapse
The lip of the case which touches the phone feels very rough (I have a white one case on me).
I would not be surprised if the case is what caused that damage, shame on SPIGEN if so, I'm not gonna be using my case until this is sorted out.

Spigen [Thin Fit] [Black] Premium Matte Finish Hard Case [Amazon]

This is my short take on this new case I just received today. I like it because it is thin. The cut outs are clean and centered. The back has a soft touch plastic feel so it helps with grip. Finger prints do show on the case (some people with dry hands will not have an issue. My hands are normally moist.) but can be easily wiped away.
Normally the hybrid cases with PC (polycarbonate) on the back and TPU on the sides that cover the buttons give them a mushy feeling when pressed. It is hard to tell if you pushed the button all the way down or not. So with the cut outs for the power and volume button, this problem is eliminated. The plastic which separates the two buttons help me to identify each button quickly. I also found the buttons were unintentionally pressed a lot when I didn't have the case. I don't have this issue anymore. I would recommend this case for anyone who wants protection against scratches. It won't protect the phone against high drops. There is no cushion or air pockets to protect the phone. But this is exactly what these thin cases are for, scratch protection and protection against small bumps. I bought it at Amazon. I ordered it around noon Pacific Time and it was shipped after two hours. I was pleased with the speedy handling.
Please check out the pictures below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update...this sounds silly but the case seems to make the phone feel heavier to me. But the added weight feels good in the hand. The case by itself is not heavy. Not sure why I feel this way...
Update # 2: 24 hours later, I am still loving this case. The finger print scanner cut out is the perfect size. I have not had any issues unlocking my phone. I actually wanted a clear case but this black color is starting to grow on me. With the camera visor being glossy black and the case being flat black, it adds a stealth look along with providing some contrast.
Update # 3: The case's matte finish does not create too much friction when inserting the phone into your jean packet or pulling it out. This is a plus.

forum.xda-developers.com/nexus-6p/accessories/spigen-t3213191

minhtluu said:
This is my short take on this new case I just received today. I like it because it is thin. The cut outs are clean and centered. The back has a soft touch plastic feel to it helps with grip. Finger prints do show on the case but can be easily wiped away.
Please check out the pictures below:
https://goo.gl/photos/vqvrASNWxK9Q7fey7
https://goo.gl/photos/hvcbsuXJv4u2Sihp8
https://goo.gl/photos/nKYsUJArmK3EiCin7
https://goo.gl/photos/HiJwzh9kNUFMCmCf6
I don't usually post pictures on here so I didn't know how to embed them into the open post.
Click to expand...
Click to collapse
Looks nice, I'm usually pretty impressed with Spigen cases. I ordered this one: http://www.spigen.com/products/nexus-6p-case-rugged-armor hopefully it gets here soon because I'm not a huge fan of the Ringke case I have now.

mlin said:
Looks nice, I'm usually pretty impressed with Spigen cases. I ordered this one: http://www.spigen.com/products/nexus-6p-case-rugged-armor hopefully it gets here soon because I'm not a huge fan of the Ringke case I have now.
Click to expand...
Click to collapse
What don't you like about Ringke? The Rugged Armor is rubbish.

anglerstock said:
What don't you like about Ringke? The Rugged Armor is rubbish.
Click to expand...
Click to collapse
Seems many buyers on Amazon would disagree with you. Three main things I don't like about the Ringke:
1) I don't really like the feel of the case
2) Its a fingerprint magnet, unlike anything I've ever experienced.
3) The front edges are kind of sharp which can make it a little uncomfortable to hold against my ear while on the phone.
If only Otterbox made the Symmetry series for the Nexus 6p and all my future phones, I'd never have to shop around for cases again.

This case is pretty excellent - feels grippy & solid

mlin said:
Seems many buyers on Amazon would disagree with you. Three main things I don't like about the Ringke:
1) I don't really like the feel of the case
2) Its a fingerprint magnet, unlike anything I've ever experienced.
3) The front edges are kind of sharp which can make it a little uncomfortable to hold against my ear while on the phone.
If only Otterbox made the Symmetry series for the Nexus 6p and all my future phones, I'd never have to shop around for cases again.
Click to expand...
Click to collapse
Lol I was going to say that many buyers on Amazon would disagree with you about Ringke, but I guess you know that buyers go with the flow most of the time. All of what you said is true for the Rugged Armor, which are the reasons why I don't like it. And also it is sand magnet too. That's my real life feedback. I am sure the Amazon buyers will disagree

anglerstock said:
Lol I was going to say that many buyers on Amazon would disagree with you about Ringke, but I guess you know that buyers go with the flow most of the time. All of what you said is true for the Rugged Armor, which are the reasons why I don't like it. And also it is sand magnet too. That's my real life feedback. I am sure the Amazon buyers will disagree
Click to expand...
Click to collapse
Ultimately I can just return it if I dont like it. The inconvenience of owning an unpopular phone and being unable to try a product hands on before purchase, but at least Amazon has a solid return policy.

minhtluu said:
This is my short take on this new case I just received today. I like it because it is thin. The cut outs are clean and centered. The back has a soft touch plastic feel to it helps with grip. Finger prints do show on the case but can be easily wiped away.
I don't usually post pictures on here so I didn't know how to embed them into the open post.
Click to expand...
Click to collapse
I love it, except that the upper and lower machined extreme edges aren't protected from certain angles.

I've never been a big fan of cases, especially on beautiful devices like this one - but you just sold me on this case. Great pics!

ZeGuitarist said:
I've never been a big fan of cases, especially on beautiful devices like this one - but you just sold me on this case. Great pics!
Click to expand...
Click to collapse
I am not a fan of cases either and will probably remove it once the phone isn't new to me anymore (in 3 months?) But I can't wait for the super thin one that the others are chatting about from Huawei. I want to ensure my phone doesn't scratch considering the metal body. Good luck.

minhtluu said:
(...)
Click to expand...
Click to collapse
OP, a question to you: do you think the case will accomodate one of those thin metal plates attached to the back plate on the inside, to use with a magnetic car mount? Like this:
The plate should be very slim, only about 0,5-1mm in thickness. Do you think this will work? Any way you could test this out for me even, by sticking something of approx. that thickness in between the back and case?
Thanks in advance!

ZeGuitarist said:
OP, a question to you: do you think the case will accomodate one of those thin metal plates attached to the back plate on the inside, to use with a magnetic car mount? Like this:
The plate should be very slim, only about 0,5-1mm in thickness. Do you think this will work? Any way you could test this out for me even, by sticking something of approx. that thickness in between the back and case?
Thanks in advance!
Click to expand...
Click to collapse
I have that same car mount. It works for me with no issues. I'm sure it will work out for you as well.
BTW...I do not notice the plate after the case is put on. The back is flat. The pictures taken have the plate inserted.

minhtluu said:
I have that same car mount. It works for me with no issues. I'm sure it will work out for you as well.
BTW...I do not notice the plate after the case is put on. The back is flat. The pictures taken have the plate inserted.
Click to expand...
Click to collapse
Haha, what a coincidence! I'm happy to hear you don't even notice the plate sitting there, and even happier to hear that the plate was actually in there in those pics, because I didn't notice it myself either
Cheers!

I'm really enjoying this case as well. I agree with all the OP'sthoughts especially about fixing the sensitive button presses. Overall very happy with the thiness, fit and soft touch. Also purchased thisNexus 6P Case, Monoy High Quality Ultra Thin Matte Black Hard case Cover for Huawei (Google) Nexus 6P 5.7" Devices (2015) (Black Hard Case) https://www.amazon.com/dp/B0168B7RIM/ref=cm_sw_r_other_awd_5XZtwbS5G6308 which is also nice. Very thin but covers most of the visor and has a textured soft touch finish. I did end up using the spigen but may switch. The other case doesn't have an issue with fingerprints.

iNiREALiZED said:
I'm really enjoying this case as well. I agree with all the OP'sthoughts especially about fixing the sensitive button presses. Overall very happy with the thiness, fit and soft touch. Also purchased thisNexus 6P Case, Monoy High Quality Ultra Thin Matte Black Hard case Cover for Huawei (Google) Nexus 6P 5.7" Devices (2015) (Black Hard Case) https://www.amazon.com/dp/B0168B7RIM/ref=cm_sw_r_other_awd_5XZtwbS5G6308 which is also nice. Very thin but covers most of the visor and has a textured soft touch finish. I did end up using the spigen but may switch. The other case doesn't have an issue with fingerprints.
Click to expand...
Click to collapse
Thanks for the info. Which one is thinner between the two?

minhtluu said:
Thanks for the info. Which one is thinner between the two?
Click to expand...
Click to collapse
Without using any tool for measurement they seem to be identical in thinness. Only notable differences between the two would be the visor cover, soft touch finish, and the spigen has a piece that separates the volume and power buttons. Either of these things can be taken as a plus or minus depending on personally preference. If you're deciding between the two the Monoy case shipped and arrived faster.

i wish there was a clear version of this

i dont think i like the idea that the entire top glass is exposed like that. seems like a good place to get scratched

indianajonze said:
i dont think i like the idea that the entire top glass is exposed like that. seems like a good place to get scratched
Click to expand...
Click to collapse
There is a tiny lip so the glass does not contact the surface if placed glass side down. I think you need a screen protector if you're worried.

Samsung Galaxy Note 7 Bumper Cases

EvolutiveLabs is currently experimenting with a design for a RhinoShield case (presumably a backless bumper case).
A RhinoShield case will be made for the new Samsung Galaxy Note 7. We are experimenting on a new design for this device. If you are interested in knowing more, please do subscribe to this list and we will keep you updated once we have more information.
The current release date is September. Pre-Order will start later this August.
Anyone that's interested in being notified on the latest news/pre-order/etc.. can sign-up here:
http://www.evolutivelabs.com/products/galaxy-note-7-case

Looks like a decent case. I'll be looking forward to it.

Do any other backless bumper cases exist? I never found one for the Note 5 and would like to for the 7. The back on a bumper case is pointless and just adds thickness.

Lucent said:
Do any other backless bumper cases exist? I never found one for the Note 5 and would like to for the 7. The back on a bumper case is pointless and just adds thickness.
Click to expand...
Click to collapse
I ordered an Aluminum Backless Bumper from eBay a couple days ago. There's a few color options, but, I selected the black, should look nice with the Black Onyx model:
http://www.ebay.com/itm/182230578501
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Looks sweet. Though, I'd like at least like a thin back with the honeycomb pattern they advertise for some minor protection, since it's all glass on the back, too.

Im afraid of this cause what if it lands flat on jts back? No protection at all.

I thought the whole point of a bumper was to be raised on the front and back so it can land on flat surfaces on either side and not damage the front or back. That's what makes it a bumper and not a regular case.

Lucent said:
I thought the whole point of a bumper was to be raised on the front and back so it can land on flat surfaces on either side and not damage the front or back. That's what makes it a bumper and not a regular case.
Click to expand...
Click to collapse
+1 :good:
Exactly, that's the whole point of this thread.

KOLIOSIS said:
I ordered an Aluminum Backless Bumper from eBay a couple days ago. There's a few color options, but, I selected the black, should look nice with the Black Onyx model:
http://www.ebay.com/itm/182230578501
Click to expand...
Click to collapse
This case looks really nice, i will love to see it on the actual phone.

Jerseymase54 said:
This case looks really nice, i will love to see it on the actual phone.
Click to expand...
Click to collapse
I'll post some pix as soon as it arrives. :good:

KOLIOSIS said:
I'll post some pix as soon as it arrives. :good:
Click to expand...
Click to collapse
Please do. Thanks

Thinking about taking a razor blade to the back of one of these Ringke cases I got for $1 to see if I can make my own bumper case. If no one will make a real bumper, maybe we can at least find the fake bumper case that can be easily converted into a real bumper case.

Lucent said:
Thinking about taking a razor blade to the back of one of these Ringke cases I got for $1 to see if I can make my own bumper case. If no one will make a real bumper, maybe we can at least find the fake bumper case that can be easily converted into a real bumper case.
Click to expand...
Click to collapse
I'll probably do likewise,the Poetic Affinity case comes to mind.
The EvoLutive Labs/RhinoShield bumper for the HTC 10 adds too much width in the grip.
Some complained about the stiffness of the buttons as well.
I have no problem w/the latter,but,I did find the added width was too much & mine ended up in the land of misfit phone accessories after 1-2 days of use,which was a bummer @ $30..............

This was my favorite case for the note 5, can't wait to try this out especially since they didn't make one for the SD Edge

Good news! The Ringke Fusion, Fusion Mirror, and Frame are all two different types of plastic glued together, so with some bending and a razor blade to start the cut, you can separate them and throw away the back pretty cleanly. I don't have my Note 7 yet to see if it still keeps the camera off the table, and I'm not sure how much I stretched it pulling them apart, but it looks to be exactly what I wanted. Picture attached. These were $1 or $2 with coupon on Amazon a week or two ago. The fourth one I have from Ringke, the Air, is all TPU with no clear line to cut through, so I'm not even going to attempt making that one backless.

Lucent said:
Good news! The Ringke Fusion, Fusion Mirror, and Frame are all two different types of plastic glued together, so with some bending and a razor blade to start the cut, you can separate them and throw away the back pretty cleanly. I don't have my Note 7 yet to see if it still keeps the camera off the table, and I'm not sure how much I stretched it pulling them apart, but it looks to be exactly what I wanted. Picture attached. These were $1 or $2 with coupon on Amazon a week or two ago. The fourth one I have from Ringke, the Air, is all TPU with no clear line to cut through, so I'm not even going to attempt making that one backless.
Click to expand...
Click to collapse
Well the question now will be...how well it will hold the phone..since it's just tpu..
I would imagine taking it out of your pockets will dislodge it from your make-shift bumper case
Sent from my SM-N910P using Tapatalk

kwazytazz said:
Well the question now will be...how well it will hold the phone..since it's just tpu..
I would imagine taking it out of your pockets will dislodge it from your make-shift bumper case
Click to expand...
Click to collapse
You are correct. The Fusion and Fusion Mirror were too flimsy on their own. The Frame case, however, with its plastic reinforcement wrapping around the TPU, is pretty decent. If you're going to modify a case to turn it into a backless bumper, I recommend only the Ringke Frame of those.

Lucent said:
You are correct. The Fusion and Fusion Mirror were too flimsy on their own. The Frame case, however, with its plastic reinforcement wrapping around the TPU, is pretty decent. If you're going to modify a case to turn it into a backless bumper, I recommend only the Ringke Frame of those.
Click to expand...
Click to collapse
Have you tried it with the frame or just guessing? I'm very curious if this will work because I don't like cases, I prefer bumpers.

skillzo1 said:
Im afraid of this cause what if it lands flat on jts back? No protection at all.
Click to expand...
Click to collapse
I'm with you. It looks good for sure. But because of the lack of back support, I'll have to pass.
Although looking forward to seeing the pics.

The Frame does work and is sturdy. I'll take a photo soon. Not sure what the advantage of back support is. We don't have front support. We have the lip sticking out on both sides to protect both equally.

PHOTOS: The best cases available for the Mix. Added the Love Mei Powerful case!

I've gone through all of the threads on screen protectors for the mix and I have observed that the majority aren't happy with the screen protectors they've got. I've ordered almost every type of tempered glass protector available for this device but I'm waiting for them to arrive.
For those who already have some screen protector installed on your mix, could you please upload photos of the device with the screen protector installed.
This is so that it can help other buyers to narrow down to the better screen protectors available. If you are satisfied with the screen protector you have bought, it would also help if you post a link to where you've bought it. I would have done this myself if I had received all the protectors I ordered. Unfortunately I haven't received anything yet.
Some reports suggest that Xiaomi may have used two different suppliers for the digitizer, one of them being prone to getting scratches easily. Even if this was not the case, I have seen many badly scratched Gorilla glass displays so I don't want to take the chance.
Hoping that people who already have some form of screen protection can help other buyers!
I have also bought all the decent cases available on ebay including the Love Mei Performance case and will post a review as soon as I receive them.
UPDATE: The Love Mei Powerful Case. This is the most rugged, shock-proof, snow-proof, dust-proof, splash-proof, everything under the sun-proof (except submersion in water) case available for the Mix.
As you can see from the photo comparison with another regular shock-proof case, this one is a beast. It lives up to its name. Came in a phone-box style premium box and certainly lives up to its price-tag. The case is made up of a hard aluminium shell with rubber layers for shock absorption. It also has a built-in tempered glass protector, meaning you wont need another screen protector.
The manufacturer also claims that the case offers drop-protection from up to 1.8m (5.9 feet).
I wouldn't recommend this case for daily use, mainly due to the sheer size of the case and not because it completely changes the look of the Mix. But for those of you who require extreme protection, if you have a baby at home who thinks the Mix is a Frisbee or if your dog likes playing "catch" and you only have your phone in hand, this is your answer. Buy this case!!
As you can see, I'm not using this case and may use this only if I'm going on a holiday or any outdoor activity which demands more protection for the phone. Hence, I don't regret buying it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And now, my favourite case among all the cases I have for the Mix. The 360 Shock proof Rubber case. (This case is sold under many names, the most common being 360 Shockproof. Just follow product images. Anyway there isn't any branding printed on the actual case.)
This looks like something which came straight from the phone manufacturer. Slim and feels premium. Doesn't look or feel cheap and I believe the rubber material offers decent protection from bumps. I don't know whether it can withstand drops though.
The case doesn't feel cheap like the Red Plastic rubber shock proof case I've posted earlier (See 2nd post). It also has a smaller lip above the screen compared to the Plastic case but has raised corners. Maybe the plastic case offers more protection due to the better lip surrounding the screen and also because it is rubber+plastic combo, meaning there are two materials to absorb shock compared to just rubber with this one. But the reason why this is my favourite case is because it offers a balance between looks and protection.
Hope this post has helped you decide which case to get for the Mix. All cases showcased here are available on ebay & Amazon.
Cheers!

I've received the full coverage screen protector and a case today and as promised I'm uploading photos here so that it may help you decide.
I haven't experienced any issues with touch functionality using this protector like some like some users have mentioned. But as the glass hovers over the screen due to the adhesive only around the frame, applying this screen protector makes it look as if the display has a lower contrast ratio. This is due to the gap between the actual display glass and the tempered glass protector. You lose the experience of a fully laminated display. This isn't very noticeable in a well lit room but noticeable whenever you view images or videos with dark scenes. The blacks look greyish.
Also this is a fingerprint magnet and the glass tends to attract some dust. I've tried re-applying the protector over three times and a speck of dust manages to get in under the glass every time. This isn't the first time I'm applying screen protectors and its definitely something to do with the coating on the glass which attracts dust, maybe due to static.
The case feels slightly cheap (maybe because it was cheap ) but looks like it can protect the phone well. The only gripe I have is that there is no cushioning on the back, like cases from Spigen. The rubber like material you see is more like a bumper attached to a plastic shell. The back of the phone touches the plastic shell as you see in the images. Comparable to those hard plastic cases you get. Don't know whether that helps in terms of protection but the case has a good lip around the screen as you can see.
For those wondering, I bought the red color because the other colors for this case looked too bland. The case is available in Gold, light blue, Grey and silver. I wish there was black but there isn't.
I have more cases coming in and will update this when I receive it. Till then I hope those willing to help can also upload photos of their cases and screen protectors.
Cheers!

Here's a couple pix of the PELOSI TPU/Sandstone finish case:
https://www.casefanatic.com/xiaomi/case-xiaomi-mi-mix-pelosi-quicksand-pattern-slim-matte-tpu-cover/
The cutouts for the mics/3.5mm jack/speaker grill/USB Port are precise & allow enough room for oversized headphone/USB plugs.
The volume rocker & power button are covered & are easy to identify by feel.
As for protection,it'll keep the backside free of scratches/etc,but,as for protection from drops/etc... YMMV,as this is a low profile case,adding minimal width & thickness to the overall dimensions.
It works for me,the main reason I even bother with a case for this phone is the slippery grip.

Found some new bumper case.
https://www.armorkingcase.com/blogs/news/imatch-slim-light-aluminum-metal-shockproof-bumper-case-with-kickstand-for-xiaomi-mi-mix

dancoHERO said:
Found some new bumper case.
https://www.armorkingcase.com/blogs/news/imatch-slim-light-aluminum-metal-shockproof-bumper-case-with-kickstand-for-xiaomi-mi-mix
Click to expand...
Click to collapse
Interesting bumper, but would this protect the device? I'd imagine it would just ripple the impact into the ceramic and it would probably still shatter, unless there's a good amount of padding on the inside of the frame.

I prefer the minimal amount of case / bumper on a phone. If it wasn't as slippery ide go naked, but the TPU gives you more hand confidence. Though that amorkingcase looks pretty sweet, if it was not as "sharp and shaped" looking

KOLIOSIS said:
Here's a couple pix of the PELOSI TPU/Sandstone finish case:
https://www.casefanatic.com/xiaomi/case-xiaomi-mi-mix-pelosi-quicksand-pattern-slim-matte-tpu-cover/
The cutouts for the mics/3.5mm jack/speaker grill/USB Port are precise & allow enough room for oversized headphone/USB plugs.
The volume rocker & power button are covered & are easy to identify by feel.
As for protection,it'll keep the backside free of scratches/etc,but,as for protection from drops/etc... YMMV,as this is a low profile case,adding minimal width & thickness to the overall dimensions.
It works for me,the main reason I even bother with a case for this phone is the slippery grip.
Click to expand...
Click to collapse
Where did you get this shipped to/ how long did it take? I ask because it's about half off on ebay , but will probably take a long time to get to me in the states.

LaNsLyDe said:
Where did you get this shipped to/ how long did it take? I ask because it's about half off on ebay , but will probably take a long time to get to me in the states.
Click to expand...
Click to collapse
e-Bay & yes,it took about two weeks to arrive in the U.S.

KOLIOSIS said:
e-Bay & yes,it took about two weeks to arrive in the U.S.
Click to expand...
Click to collapse
Thanks a lot just ordered

LaNsLyDe said:
Thanks a lot just ordered
Click to expand...
Click to collapse
I just looked up the shipping history on my Pelosi case:
November 25 to December 12,but, I'm guessing yours won't take as long to deliver,as mine was in transit during the peak holiday season....
Sent from my lithium using XDA Labs

KOLIOSIS said:
I just looked up the shipping history on my Pelosi case:
November 25 to December 12,but, I'm guessing yours won't take as long to deliver,as mine was in transit during the peak holiday season....
Click to expand...
Click to collapse
Thanks. Patiently waiting

What's the length/width of the love mei case? Its not shown on any site.

ChodTheWacko said:
What's the length/width of the love mei case? Its not shown on any site.
Click to expand...
Click to collapse
Its not mentioned on the box either. It adds approx. 10mm to all sides. Its a huge case as you can see from the pictures.

I went with the Pelosi and I LOVE it!

satishp said:
Its not mentioned on the box either. It adds approx. 10mm to all sides. Its a huge case as you can see from the pictures.
Click to expand...
Click to collapse
Thanks! That pretty much kills pocketability for me. Shame, but I'm not surprised.

ChodTheWacko said:
Thanks! That pretty much kills pocketability for me. Shame, but I'm not surprised.
Click to expand...
Click to collapse
It doesn't affect pocketability that much actually. It just feels like a big phone. The overall size would be similar or slightly wider than the Xperia Z Ultra. But it would still look weird with formal\office wear though if that matters.
The main issue is with daily use. You wouldn't be able to use the phone with one hand anymore.
This case is best for someone who needs serious drop\splash resistance.
There is a similar case which is smaller. Its the imatch case which looks cool in my opinion but the case is hard to find on ebay. You can get it on aliexpress or amazon though.
I liked the Gold and Black variant of this case but I doubt whether it would cause issues when using a wireless charger. Hence, I haven't bought this yet.
iMatch Metal Silicone Shockproof case
If offers a similar level of protection as the Love Mei case but it is smaller. It even has a metal kickstand.

I have to agree that the 360 Shock proof Rubber case listed by the OP is the best case so far. It feels nice and offers a decent drop protection without too much bulk. It looks like it was meant to come with the phone. The matte color looks stealthy. The protection covers all angle of the phone and even a 1 mm lip to protect screen. I have dropped it 3-4 feet onto hardwood floor and sustained no damage. The extra bumps at the corner really provides a nice cushion. I highly recommend it.

@satishp @McoupeMD
Where did you guys purchase the 360 Case?

KOLIOSIS said:
@[email protected]
Where did you guys purchase the 360 Case?
Click to expand...
Click to collapse
I bought it on ebay. They also sell it on amazon. Just takes awhile to arrive from china.

McoupeMD said:
I bought it on ebay. They also sell it on amazon. Just takes awhile to arrive from china.
Click to expand...
Click to collapse
Got it,THX!
https://www.amazon.com/dp/B01MRTEG42/ref=twister_B01N75ZUQ0?_encoding=UTF8&th=1