Database Info

Updated with Pics! Diztronic TPU Case

Available here. As the title says, they are now released. I just ordered my One S tonight and going to order a couple of these cases. For those that have not tried this brand, I can assure you they are the best fitting and best quality you can get for a TPU case. I use one on my Galaxy S II.
Updated with Pictures!
So I received my phone yesterday (love it!) and decided to update this with pictures. It fits perfectly, snug, nothing loose and is thin and keeps the phone thin. My ONLY complaint is they didn't make an open port for the volume like usual. Instead they included volume buttons which are a little difficult to push but not a big deal. Pictures are of the Matte Black. Last picture is the Matte Black Translucent or Smoke if you will.
Front:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Back:
Power Port:
Headphone Port/Noise Canceling Mic/Power Ports:
Volume Buttons:
Camera Port (Slightly raised so should help protect it):
Speaker Port:
Translucent Matte Black (or Smoke if you want to call it that):

At last someone is offering a matt black case rather than glossy!
Look very good. Ordered one each of the matt black and translucent black.

These look nice, I might buy a couple. Thanks for the info.

How fat are they, like how much do they add to the thickness of the device?

relatively thin in comparison to other cases though you might notice it since you'd notice anything on a device this thin

psych0t1c said:
How fat are they, like how much do they add to the thickness of the device?
Click to expand...
Click to collapse
It's probably one of the thinnest cases you'll find. Maybe the featherlite is thinner but does not protect the top and bottom. The quality of diztronic is 10 fold that of any cheap ebay tpu case. Below are some pictures of my SGSII (I apologize as I do not have my One S or case yet) with the matte black case on it and next to it. You CANNOT beat this case for $10.
First 2 are a side view with case on and then off.
Picture of the top so you can see the lip. The lip fits tightly and does not warp out or bow out over time. had this case for 5 months.
A couple side by side photos to see the size of the case next to the phone.
The case alone to see the quality of the build. No rough edges, has elevated lip around camera lense. Hole cutouts are precise and line up perfectly.

so are these cases in two pieces or one piece for the One S or do you know? I almost bought one off eBay over the weekend but was kinda iffy about the power button not being covered up.. from the looks of the power button i was kinda afraid that it would be hard to press if the case was very thick.. When do you think you are going to get your phone and case to possibly post pics of how it is on it?

one piece

bmar08 said:
so are these cases in two pieces or one piece for the One S or do you know? I almost bought one off eBay over the weekend but was kinda iffy about the power button not being covered up.. from the looks of the power button i was kinda afraid that it would be hard to press if the case was very thick.. When do you think you are going to get your phone and case to possibly post pics of how it is on it?
Click to expand...
Click to collapse
It's one piece. My phone arrives Thursday so I can take pics then. I already have the cases, they are same great quality as the one I posted pics on. There is a cutout for the pwr button same as my SGSII, it does not hinder pushing the power button but will report back once I have the phone.

Can anyone tell me the differences between the
Diztronic High Gloss Translucent Black TPU Case
Diztronic Matte Back Black TPU Case
Diztronic Matte Back Translucent Black TPU Case
How does each one feel, look and which one is recommended for both their aesthetics and their protection? If anyone has any of these, please share your thoughts!

AndroidBlizzard said:
Can anyone tell me the differences between the
Diztronic High Gloss Translucent Black TPU Case
Diztronic Matte Back Black TPU Case
Diztronic Matte Back Translucent Black TPU Case
How does each one feel, look and which one is recommended for both their aesthetics and their protection? If anyone has any of these, please share your thoughts!
Click to expand...
Click to collapse
You rather buy all three and decide from there plus it's only $10 each.I have the Matte black but I don't use it anymore .I just don't like the look of it with the case, maybe cause this is my first ever case on a mobile phone I have ever own.

makomek said:
You rather buy all three and decide from there plus it's only $10 each.I have the Matte black but I don't use it anymore .I just don't like the look of it with the case, maybe cause this is my first ever case on a mobile phone I have ever own.
Click to expand...
Click to collapse
I am going in that direction, although I am buying at most, 2 of the cases.
Which two should I go with?

How's the camera lens protection with this one? Since the lens is so large, the only means of effective protection is to have the case slightly thicker around the lens, which will help lessen the chance of objects directly striking the lens. If the case protrudes a decent amount above the lens, that's GOOD.

Got my case today
Just got my diztronic case today (matte black) and it is pretty awesome. Still very thin but looks like it should protect the phone nicely. I dropped my last phone and cracked the screen so i am very paranoid about dropping this one.
My only complaint is that it came with a screen protector that is total crap.
Still it looks like a great case and is one hell of a deal.

they do not deliver in romania...

mulderc said:
Just got my diztronic case today (matte black) and it is pretty awesome. Still very thin but looks like it should protect the phone nicely. I dropped my last phone and cracked the screen so i am very paranoid about dropping this one.
My only complaint is that it came with a screen protector that is total crap.
Still it looks like a great case and is one hell of a deal.
Click to expand...
Click to collapse
What do you mean by that the screen protector is crap? Is it a crystal clear version? How is it bad? I was counting on this as a screen protector, if it is not good then I may have to purchase another screen protector separately.

the cover is a hair thicker then the lense .I don't see a reason to use a screen protector since this phone has the gorilla glass ll ,I have a sensation and G2x with badly abuse and the screen is still like new.

AndroidBlizzard said:
Can anyone tell me the differences between the
Diztronic High Gloss Translucent Black TPU Case
Diztronic Matte Back Black TPU Case
Diztronic Matte Back Translucent Black TPU Case
How does each one feel, look and which one is recommended for both their aesthetics and their protection? If anyone has any of these, please share your thoughts!
Click to expand...
Click to collapse
I ordered the Matte black black and Matte Black Translucent. Both arrived today. They are pretty similar. The translucent one is not quite as dark as the black (but not as grey-looking as the pics on the website). Only the back is matte finish. The front is glossy. I prefer the translucent one as the glossy effect is less obvious then on the black one.
Very nice cases though. Fit well and feel good in the hand. Would recommend!

AndroidBlizzard said:
I am going in that direction, although I am buying at most, 2 of the cases.
Which two should I go with?
Click to expand...
Click to collapse
If your looking for someone to TELL you what to buy then stay away from the high gloss. It will most likely be a fingerprint magnet and show scratches more easily. You should note that all cases the front rim is high gloss. I do not know why, my guess is so it matches the screen.
Matte is the best for hiding fingerprints and marks/scratches.
I have both matte black and translucent matte black, both look good but won't have my phone until Thursday to put them on and take pictures. Stupid slow UPS!!!!

The screen protector was easily damaged by my fingernail. It was also very difficult to apply to the screen (but i have always been really bad apply those things).
Maybe you will have better luck but honestly i would go with a better screen protector. Right now i am thinking about just going without. The case makes it where the phone will never rest directly on the screen so i am not all that worried about screen damage.
This case is nice but i have to say with a phone this sexy it is a shame to put it in a case.

Diztronic Matte Black TPU Case Mini Review

http://www.neowin.net/forum/topic/1090499-diztronic-matte-black-tpu-case/
Mini Review of the Diztronic Matte Black TPU Case:
You receive a screen protector and cleaning cloth with the case. The screen protector doesn't appear to be a great fit, no idea about the quality and how it affects the screen overall. The cleaning cloth seems pretty good
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This case is very thin, it is slightly thinner than the TPU gel case, about 1mm is added to the S.
Diztronic case on the left, TPU gel case in the middle and the Tough case on the right:
Diztronic case on the left and the One S "naked" on the right:
The case looks great, in some ways the glossy front half of the case looks rather good with the back half a charcoal matte back (it is the exact same colour as the black S). Personally I would have preferred the front to have been the same colour/finish, however, the back is very smooth and not grippy at all, it has the least amount of grip compared to the other cases I own, I would say it has a more "slippy" feel than the ceramic back of the Black One S as well, where as the glossy black front half of the case is grippy, so you will have no problems picking the mobile up and when holding it firmly around the edges you should be safe enough, so in some ways the black glossy part is a requirement.
You have cut outs for the following:
- 3.5mm audio jack and the mic on the top of the S
- Mic on the bottom
- Power/Lock button
- USB port
- Speaker and Camera on the back
The edges of the cut outs have a nice rounded finish and look "smooth".
In terms of the "fit", overall it is excellent, however, at the bottom of the front it is just a mm too short. It is pretty much the same as the TPU gel case for "tightness", although I found the Diztronic case slightly easier to fit.
You can see (only when you look closely though) and feel some rough seam edges where the matte and glossy black parts meet, more so on the volume buttons (although the volume buttons have only the matte finish), but compared to the £3 TPU gel case, it is much better! There is one spot, which is particularly bad though, on the bottom left of the case:
The great thing about this case is that you have a cut out for the power/lock button The TPU gel case was too tight around that area and also the volume buttons are much better, easier to press and have good feedback when pressed, still not as good as the Tough Case though and obviously when the S is "naked". It is easy to identify the volume buttons without looking compared to the TPU gel case.
The camera lens is below the surface and the case covers the edges on the front and adds a very tiny amount to the front so that there is a a raised edge for when the mobile is placed flat down on a surface to stop the screen touching the desk surface, it is slightly less than what the TPU gel case added.
Regarding finger prints, sticky patches and greasy looking marks, I don't think this is going to be a problem at all with this case due to the matte back and just how smooth it is. So far I have yet to see any finger prints etc. And if there is, you will only notice them under extreme lighting conditions and when looking at the case from certain angles.
It is more "comfortable" to hold the S with the Diztronic case rather than the S "naked", however, it doesn't "feel" as nice to touch/hold as the ceramic back on the S.
The case feels and looks much better than the TPU gel case, overall it has a higher quality feel and look to it.
The minimal/clean design for the front of the S is still hidden/ruined slightly, as expected, unfortunately as I said before this will be the same for every case that covers all the edges, only the rock/nillkin/case mate barely there cases would keep the front looking pretty minimal/clean, but they don't offer any protection around the top or bottom.
As for protection/durability, I would say that the case would do a good job protecting the mobile from normal drops and the standard scratches etc. however, a drop onto solid concrete etc. from a good height could damage the mobile i.e. crack the screen as their isn't enough thickness to the case like there is with the Tough case and there would be no shock absorption either. But for daily use, I would say it is perfectly fine. However, this case would show scruff marks on the corners/back when dropped onto concrete etc.
All in all, the case is very good especially considering the price (£8), highly recommend it to everyone especially if you are looking for a case to cover all edges but with little bulk.
IMO there isn't a better case out for the One S that covers all edges whilst adding little bulk and looking as nice overall, especially the lovely smooth matte back even though it isn't grippy
Pros:
- protection for all edges
- nice cut out for the power/lock button
- good feedback for the volume buttons, easy to identify and to activate the buttons
- nice finish/looks overall
- comfortable to hold
- Also receive a cleaning cloth and screen protector
- resistant to finger prints, greasy marks and sticky patches etc.
- price
Disadvantage:
- no grip at all on the matte back
Thanks for reading and I hope this review has been helpful and as always any questions, ask away

I was dying for someone to review this case.
Next check I'm getting this case then a Personalized Andy CruzerLite case.
Thank you.
Sent from my HTC VLE_U using Tapatalk 2

No problem

i woulda done the review if i knew ppl were waiting on it too!
i got the same exact case and i love it. super cheap!
dropped the phone on CEMENT from chest high and it hit the bottom corner and saved my ONE S!!!
that alone made this worth it!! its probably one of the cleanest looking cases for our phone.
the matte texture gives me just enough grip compared to naked (since its SOO dam slippery!)
it is the perfect thickness for me to hold in my hand.
4.9/5 because the POWER button is so sunken in
but i guess it helps since i dropped my old phone and broke the button.

Great to hear that the S with this case on survived that drop!

I have this case and I recommend it to anyone who owns a HTC One S. It barely adds bulk and it is still thinner than my old HD7 naked. Just very slightly, though. The included screen guard is also very nice. I did not expect much from it and ordered an invisible shield but I have not gotten around to putting that on because this screen guard is so nice! It is not the same quality as the $1 ones you get on eBay.

I also have this case, ordered from Amazon. Probably the only case I have found (though I haven't looked since getting it) that I can deal with. Been good to me so far. Only issue I have is that it collects dust and lint between it and the top of the phone. I assume though that most cases do this to some degree.

Have you guys got this case on a grey/blue one s rather than the black one as op shows? I am curious to see how it looks on the blue one. Any pics please? Thanks.
Sent from my HTC One S using xda app-developers app

I've had this case for a few months and have been very happy with it. In fact, I just received the translucent smoke color version just for something different. I like the translucent case a little better with the blue phone. The screen protector is also of good quality and has hardly any scratches after months of use. Highly recommended and a good value.
Sent from my Nexus 7 using Tapatalk 2

murse said:
I've had this case for a few months and have been very happy with it. In fact, I just received the translucent smoke color version just for something different. I like the translucent case a little better with the blue phone. The screen protector is also of good quality and has hardly any scratches after months of use. Highly recommended and a good value.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Do you think you can please post some pics, please?
Sent from my HTC VLE_U using Tapatalk 2

Pics
I can help you with that.

AL1S said:
I can help you with that.
Click to expand...
Click to collapse
Thanks for that!
So this one is the matt black not the smoke one right? It looks really good!

Yes, that was the matte black one. I am not a big fan of cases as you can see I considered the Zagg full body, but this one is actually nice, as you can see. It won't offer you the best protection but those cases are UGLY. I'd like to see what the smoke one looks like on the gradient blue One S.

Nice review. Have just ordered the case.

I have had this case for about 1 month. The fit, texture, and screen protector are all to my liking. I have nothing bad to say about anything! A great investment...too bad I dropped my One S (leaving a few scratches) a day before I got the case in the mail lol.

Review of 3 cases

I've now tried 3 cases purchased from Amazon, all good in their own way.
Terrapin TPU gel case £5.25. http://www.amazon.co.uk/gp/product/B014H39MWM?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
(I got the smoke black, which doesn't seem to be there anymore).
Good fit, cutouts work although if I was being picky I'd say they maybe are a tiny bit off center. The volume and camera keys are covered with buttons on the case that work but could be easier to use. The power button feels a bit deep in the shell, due to the 2mm or so thickness of gel. Seems to offer very good protection, best of the 3. Case comes slightly above the screen, so protecting it if you lay it face down. Adds moderate bulk to the phone.
Roxfit Titanium shell £10.09. http://www.amazon.co.uk/gp/product/B015EFMB3O?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
Bit misnamed, it's plastic with what looks like a metal insert in the back. Very good fit (in fact difficult to get the phone back out). It exposes a lot more more of the sides of the phone (all of the top, bottom, and the buttons area on the right) than the Terrapin, but still gives very good protection and makes use of the buttons easier. Corners are well protected and the case comes up over the screen, protecting it if you lay it face down. It feels pretty sturdy overall. It looks premium from the back with the gold insert, although the plastic around it maybe less so. Thinner round the sides than the Terrapin but bulkier at the back.
Easydigital hard back £2! http://www.amazon.co.uk/gp/product/B014UYKXD0?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
The cheapest of the 3, and although you can tell it's actually pretty good. Very light and thin, adds the least bulk to the phone. It's the hard plastic type of case as opposed to the gel Terrapin. It's completely clear and because it's so thin, it actually looks better on the phone than the others (in my opinion) as the phone basically looks as it normally does. The top and bottom are exposed as on the Roxfit, there are cutouts for the buttons on the right, as the case is so thin this doesn't affect their use. One point to note - if you use the cord attachment hole on the left of the phone, you can't use this case as it doesn't have a cutout for it. It offers the least protection, the corners are just covered and it only just comes above the screen. At the moment I have a plastic protector, but when the tempered glass one turns up this will probably be proud of the case. The fit is about 99% - the phone moves a tiny fraction within the case, which I'm sure could be solved with a tiny sliver of rubber in there - although to be honest I'm being very picky and it's not really a problem to live with it.
Note - none of the cases have a cutout for the sim/micro sd cover, not an issue for me.
I'm currently using the easydigital, I'll see how it works when the glass screen cover turns up.

Great info!
Could you put a picture of the phone with the last case?
I was deciding between "Orzly FlexiSlim Smoked Black" and "Orzly Bumper Case Clear" (My Z5C will be Black).

Now found my favourite - Orzly FlexSlim Case. £6.99.
It gives pretty reasonable protection but adds minimal bulk. It's a gel type case, cutouts are spot on and don't get in the way of any of the buttons. It won't give as much protection as the Roxfot or terrapin above, but enough for me. I got the white, which looks good on the black phone. I've now got a tempered glass screen protector, this case is probably a fraction of a mm above it so still protects it face down.
I can't see changing away from this now, it's better than any case I found for the Z3C (had the Devilcase, which gave good protection but was a bit bulky and very expensive).

I buy and use this
http://www.amazon.it/Sony-Xperia-Z5...corr&keywords=Sony+Xperia+Z5+Compact+terrapin
Hispanico

ewans said:
Now found my favourite - Orzly FlexSlim Case. £6.99.
It gives pretty reasonable protection but adds minimal bulk. It's a gel type case, cutouts are spot on and don't get in the way of any of the buttons. It won't give as much protection as the Roxfot or terrapin above, but enough for me. I got the white, which looks good on the black phone. I've now got a tempered glass screen protector, this case is probably a fraction of a mm above it so still protects it face down.
I can't see changing away from this now, it's better than any case I found for the Z3C (had the Devilcase, which gave good protection but was a bit bulky and very expensive).
Click to expand...
Click to collapse
How is the grip on the orzly flexislim case, compared to naked z5c? improved or approx. the same?
Sent from my Nexus 5 using Tapatalk

Mythos123 said:
How is the grip on the orzly flexislim case, compared to naked z5c? improved or approx. the same?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Definitely improved. It's not as rubbery/sticky as some, it's a sort of matt plastic/rubber finish, but no issues with grip.

ewans said:
Definitely improved. It's not as rubbery/sticky as some, it's a sort of matt plastic/rubber finish, but no issues with grip.
Click to expand...
Click to collapse
I'm trying to decide what color (smokey black / smokey white) would look better on a black z5c. Opinions?
Edit:
Sorry, I just read your previous comment about your color of choice. Could you possibly share some pictures of your phone with the case on?

I have the smoky black. But I still prefer a 100% clear cover.
Today I started using the phone naked. I've been 3 weeks with the flexislim.
Sent from my E5823

thesebastian said:
I have the smoky black. But I still prefer a 100% clear cover.
Today I started using the phone naked. I've been 3 weeks with the flexislim.
Sent from my E5823
Click to expand...
Click to collapse
Care to share some pics of your phone in the flexislim case?
Actually I don't want to use a case, but I'm afraid of droping the phone cause it's so damn slippery...

Mythos123 said:
Care to share some pics of your phone in the flexislim case?
Actually I don't want to use a case, but I'm afraid of droping the phone cause it's so damn slippery...
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I used a moto G 1st gen so don't except good quality.
The Sony logo is much more visible in reality, but it's still dark/barely visible.
Sent from my E5823

thesebastian said:
I used a moto G 1st gen so don't except good quality.
The Sony logo is much more visible in reality, but it's still dark/barely visible.
Sent from my E5823
Click to expand...
Click to collapse
Still can't decide if this cover is for me lol
Are you tired of this cover already?

Mythos123 said:
Still can't decide if this cover is for me lol
Are you tired of this cover already?
Click to expand...
Click to collapse
Haha well that depends on what're you looking for.
I bought this case to protect the phone from scratches during the 30 days for Amazon returns.
The case is really slim so it won't protect the phone against drops. But it adds some distance to the screen edge (more thickness to the phone) so it could separate your screen from the floor in a potential drop.
I like more the other Orzly solution. The crystal clear bumper. But it's a bit bigger than the flexislim
Sent from my E5823

thesebastian said:
Haha well that depends on what're you looking for.
I bought this case to protect the phone from scratches during the 30 days for Amazon returns.
The case is really slim so it won't protect the phone against drops. But it adds some distance to the screen edge (more thickness to the phone) so it could separate your screen from the floor in a potential drop.
I like more the other Orzly solution. The crystal clear bumper. But it's a bit bigger than the flexislim
Sent from my E5823
Click to expand...
Click to collapse
Thanks man!
Yeah I know that it won't protect against drops because of how slim it is.
That is actually why I'm interested in this case, cause I don't want any bulk. I'm just looking for better grip I guess to prevent drops.

Mmm the grip isn't great.
The typical (and tick) generic 100% TPU cases have a much better grip. This TPU case it's like smooth.
Sent from my E5823

How is the grip in the Terrapin tpu case?
I'm looking at the crystal clear terrapin tpu.
The volume buttons are covered right? (I don't like that).

S-Line
I am also looking for the ideal case with 2 main criteria: slim and grippy.
I usually go for genuine S-Line cases by Cimo USA but unfortunately they don't make cases for Sony devices.
I got a copy on Amazon. I can't post the link, not enough posts.
If you really want to see the exact one, search "Sony Xperia Z5 Compact - S-Style noir - Cover PhoneNatic" on Amazon.fr or .de.
I've seen several similar designs, but slightly different: different camera hole shape, fully mat back...
I will try to shrink it with the boiling water method.
If you know a good slim and grippy case, please share .

I've gotten a handful of cases coming in the mail,mind if I add them in here once I receive them?

ewans said:
Now found my favourite - Orzly FlexSlim Case. £6.99.
It gives pretty reasonable protection but adds minimal bulk. It's a gel type case, cutouts are spot on and don't get in the way of any of the buttons. It won't give as much protection as the Roxfot or terrapin above, but enough for me. I got the white, which looks good on the black phone. I've now got a tempered glass screen protector, this case is probably a fraction of a mm above it so still protects it face down.
I can't see changing away from this now, it's better than any case I found for the Z3C (had the Devilcase, which gave good protection but was a bit bulky and very expensive).
Click to expand...
Click to collapse
Hi ewans,
Sorry to resurrect an old thread - but I have just ordered my Z5C. I was going to get the terrapin or Casemate Barely There - but would like to hear your view on why the Orzly is better than terrapin.
Thanks!

i got this, and it's great
http://www.ebay.com/itm/13172077105...49&var=431096076572&ssPageName=STRK:MEBIDX:IT

Spigen [Thin Fit] [Black] Premium Matte Finish Hard Case [Amazon]

This is my short take on this new case I just received today. I like it because it is thin. The cut outs are clean and centered. The back has a soft touch plastic feel so it helps with grip. Finger prints do show on the case (some people with dry hands will not have an issue. My hands are normally moist.) but can be easily wiped away.
Normally the hybrid cases with PC (polycarbonate) on the back and TPU on the sides that cover the buttons give them a mushy feeling when pressed. It is hard to tell if you pushed the button all the way down or not. So with the cut outs for the power and volume button, this problem is eliminated. The plastic which separates the two buttons help me to identify each button quickly. I also found the buttons were unintentionally pressed a lot when I didn't have the case. I don't have this issue anymore. I would recommend this case for anyone who wants protection against scratches. It won't protect the phone against high drops. There is no cushion or air pockets to protect the phone. But this is exactly what these thin cases are for, scratch protection and protection against small bumps. I bought it at Amazon. I ordered it around noon Pacific Time and it was shipped after two hours. I was pleased with the speedy handling.
Please check out the pictures below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update...this sounds silly but the case seems to make the phone feel heavier to me. But the added weight feels good in the hand. The case by itself is not heavy. Not sure why I feel this way...
Update # 2: 24 hours later, I am still loving this case. The finger print scanner cut out is the perfect size. I have not had any issues unlocking my phone. I actually wanted a clear case but this black color is starting to grow on me. With the camera visor being glossy black and the case being flat black, it adds a stealth look along with providing some contrast.
Update # 3: The case's matte finish does not create too much friction when inserting the phone into your jean packet or pulling it out. This is a plus.

forum.xda-developers.com/nexus-6p/accessories/spigen-t3213191

minhtluu said:
This is my short take on this new case I just received today. I like it because it is thin. The cut outs are clean and centered. The back has a soft touch plastic feel to it helps with grip. Finger prints do show on the case but can be easily wiped away.
Please check out the pictures below:
https://goo.gl/photos/vqvrASNWxK9Q7fey7
https://goo.gl/photos/hvcbsuXJv4u2Sihp8
https://goo.gl/photos/nKYsUJArmK3EiCin7
https://goo.gl/photos/HiJwzh9kNUFMCmCf6
I don't usually post pictures on here so I didn't know how to embed them into the open post.
Click to expand...
Click to collapse
Looks nice, I'm usually pretty impressed with Spigen cases. I ordered this one: http://www.spigen.com/products/nexus-6p-case-rugged-armor hopefully it gets here soon because I'm not a huge fan of the Ringke case I have now.

mlin said:
Looks nice, I'm usually pretty impressed with Spigen cases. I ordered this one: http://www.spigen.com/products/nexus-6p-case-rugged-armor hopefully it gets here soon because I'm not a huge fan of the Ringke case I have now.
Click to expand...
Click to collapse
What don't you like about Ringke? The Rugged Armor is rubbish.

anglerstock said:
What don't you like about Ringke? The Rugged Armor is rubbish.
Click to expand...
Click to collapse
Seems many buyers on Amazon would disagree with you. Three main things I don't like about the Ringke:
1) I don't really like the feel of the case
2) Its a fingerprint magnet, unlike anything I've ever experienced.
3) The front edges are kind of sharp which can make it a little uncomfortable to hold against my ear while on the phone.
If only Otterbox made the Symmetry series for the Nexus 6p and all my future phones, I'd never have to shop around for cases again.

This case is pretty excellent - feels grippy & solid

mlin said:
Seems many buyers on Amazon would disagree with you. Three main things I don't like about the Ringke:
1) I don't really like the feel of the case
2) Its a fingerprint magnet, unlike anything I've ever experienced.
3) The front edges are kind of sharp which can make it a little uncomfortable to hold against my ear while on the phone.
If only Otterbox made the Symmetry series for the Nexus 6p and all my future phones, I'd never have to shop around for cases again.
Click to expand...
Click to collapse
Lol I was going to say that many buyers on Amazon would disagree with you about Ringke, but I guess you know that buyers go with the flow most of the time. All of what you said is true for the Rugged Armor, which are the reasons why I don't like it. And also it is sand magnet too. That's my real life feedback. I am sure the Amazon buyers will disagree

anglerstock said:
Lol I was going to say that many buyers on Amazon would disagree with you about Ringke, but I guess you know that buyers go with the flow most of the time. All of what you said is true for the Rugged Armor, which are the reasons why I don't like it. And also it is sand magnet too. That's my real life feedback. I am sure the Amazon buyers will disagree
Click to expand...
Click to collapse
Ultimately I can just return it if I dont like it. The inconvenience of owning an unpopular phone and being unable to try a product hands on before purchase, but at least Amazon has a solid return policy.

minhtluu said:
This is my short take on this new case I just received today. I like it because it is thin. The cut outs are clean and centered. The back has a soft touch plastic feel to it helps with grip. Finger prints do show on the case but can be easily wiped away.
I don't usually post pictures on here so I didn't know how to embed them into the open post.
Click to expand...
Click to collapse
I love it, except that the upper and lower machined extreme edges aren't protected from certain angles.

I've never been a big fan of cases, especially on beautiful devices like this one - but you just sold me on this case. Great pics!

ZeGuitarist said:
I've never been a big fan of cases, especially on beautiful devices like this one - but you just sold me on this case. Great pics!
Click to expand...
Click to collapse
I am not a fan of cases either and will probably remove it once the phone isn't new to me anymore (in 3 months?) But I can't wait for the super thin one that the others are chatting about from Huawei. I want to ensure my phone doesn't scratch considering the metal body. Good luck.

minhtluu said:
(...)
Click to expand...
Click to collapse
OP, a question to you: do you think the case will accomodate one of those thin metal plates attached to the back plate on the inside, to use with a magnetic car mount? Like this:
The plate should be very slim, only about 0,5-1mm in thickness. Do you think this will work? Any way you could test this out for me even, by sticking something of approx. that thickness in between the back and case?
Thanks in advance!

ZeGuitarist said:
OP, a question to you: do you think the case will accomodate one of those thin metal plates attached to the back plate on the inside, to use with a magnetic car mount? Like this:
The plate should be very slim, only about 0,5-1mm in thickness. Do you think this will work? Any way you could test this out for me even, by sticking something of approx. that thickness in between the back and case?
Thanks in advance!
Click to expand...
Click to collapse
I have that same car mount. It works for me with no issues. I'm sure it will work out for you as well.
BTW...I do not notice the plate after the case is put on. The back is flat. The pictures taken have the plate inserted.

minhtluu said:
I have that same car mount. It works for me with no issues. I'm sure it will work out for you as well.
BTW...I do not notice the plate after the case is put on. The back is flat. The pictures taken have the plate inserted.
Click to expand...
Click to collapse
Haha, what a coincidence! I'm happy to hear you don't even notice the plate sitting there, and even happier to hear that the plate was actually in there in those pics, because I didn't notice it myself either
Cheers!

I'm really enjoying this case as well. I agree with all the OP'sthoughts especially about fixing the sensitive button presses. Overall very happy with the thiness, fit and soft touch. Also purchased thisNexus 6P Case, Monoy High Quality Ultra Thin Matte Black Hard case Cover for Huawei (Google) Nexus 6P 5.7" Devices (2015) (Black Hard Case) https://www.amazon.com/dp/B0168B7RIM/ref=cm_sw_r_other_awd_5XZtwbS5G6308 which is also nice. Very thin but covers most of the visor and has a textured soft touch finish. I did end up using the spigen but may switch. The other case doesn't have an issue with fingerprints.

iNiREALiZED said:
I'm really enjoying this case as well. I agree with all the OP'sthoughts especially about fixing the sensitive button presses. Overall very happy with the thiness, fit and soft touch. Also purchased thisNexus 6P Case, Monoy High Quality Ultra Thin Matte Black Hard case Cover for Huawei (Google) Nexus 6P 5.7" Devices (2015) (Black Hard Case) https://www.amazon.com/dp/B0168B7RIM/ref=cm_sw_r_other_awd_5XZtwbS5G6308 which is also nice. Very thin but covers most of the visor and has a textured soft touch finish. I did end up using the spigen but may switch. The other case doesn't have an issue with fingerprints.
Click to expand...
Click to collapse
Thanks for the info. Which one is thinner between the two?

minhtluu said:
Thanks for the info. Which one is thinner between the two?
Click to expand...
Click to collapse
Without using any tool for measurement they seem to be identical in thinness. Only notable differences between the two would be the visor cover, soft touch finish, and the spigen has a piece that separates the volume and power buttons. Either of these things can be taken as a plus or minus depending on personally preference. If you're deciding between the two the Monoy case shipped and arrived faster.

i wish there was a clear version of this

i dont think i like the idea that the entire top glass is exposed like that. seems like a good place to get scratched

indianajonze said:
i dont think i like the idea that the entire top glass is exposed like that. seems like a good place to get scratched
Click to expand...
Click to collapse
There is a tiny lip so the glass does not contact the surface if placed glass side down. I think you need a screen protector if you're worried.

tetded leather case

hey, all...
posted this in another thread...but, received a lack of response.
am hoping a little more visibility might draw someone out.
if not for this specific case, then for another of their products.
looking like a case i'd like to buy, but would love any feed back at all...
http://www.tetded.com/home/en/nexus...e-nexus-6p-huawei-nexus-6p-caen-lc-black.html
many thanks...
cheers.

I have no experience with this brand and it doesn't seem to be common in the USA, but looking at their site, they actually have a flip case for the 6P with SLEEP FUNCTION! Other than the grip-of-death folio case from google, I could not find any flip cases with the rare-as-unicorns sleep function. I almost gave up until I came across your post. Seriously, I was to the point where I was thinking of gutting a flip case to insert a magnet into it. Thank you!
I just ordered this and I hope I get it before christmas (for the misses):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's not cheap, but it's still cheaper than the folio case and seems much better looking. I'll update when I get it. I think the maker is in Hong Kong so it'll take at least a week.

http://imgur.com/a/L6BQ2
Here's few pictures that someone else took from Tetded leather case (without flipcover). Apparently it feels quite good (not slippery at all).

I remember the g3 community have alot of people buying the case. Tetded makes cases for most phones so the reviews are all over the place.

I purchased a folio case for my Nexus 6 from this company and was impressed with the quality. I ultimately didn't use it much as I decided that the minimal bulk of the case added to the already overly bulky phone made carrying it in my pocket uncomfortable. Oh, and the back of the case was thick enough (leather over a plastic case mold) that it prevented wireless charging on the 6 to work.

Most curious of the feel of the leather. nothing worse then cheap plasticy leather

^^^...that's a great point.
needless to say...curiosity got the better of me and i ordered one.
when it gets here...i'll post a review.
as i mentioned...the apple case for the 6 is pretty nice. it's actually ALL leather.
feels great and the phone sits well inside of it.
this one is actually leather seemingly wrapped around a plastic shell?
so, we'll see.
i think it might be a little bulky/thick for my tastes...
but, i'm willing to give it a shot.
in the meantime...my adopted protective case arrives later today.
$10 off deal during cyber monday.

cipher77 said:
^^^...that's a great point.
needless to say...curiosity got the better of me and i ordered one.
when it gets here...i'll post a review.
as i mentioned...the apple case for the 6 is pretty nice. it's actually ALL leather.
feels great and the phone sits well inside of it.
this one is actually leather seemingly wrapped around a plastic shell?
so, we'll see.
i think it might be a little bulky/thick for my tastes...
but, i'm willing to give it a shot.
in the meantime...my adopted protective case arrives later today.
$10 off deal during cyber monday.
Click to expand...
Click to collapse
look forward to the review!

The one for the 6, which looks exactly like this model for the 6P, is basically a ultra thin case (think Spigen Thin-Fit) with a leather skin. The leather, at least on the one for my 6, was impressive and felt nice. Very well finished and detailed. The case fit well and snapped onto the phone with authority, and was a precise fit.

Psyclism said:
The one for the 6, which looks exactly like this model for the 6P, is basically a ultra thin case (think Spigen Thin-Fit) with a leather skin. The leather, at least on the one for my 6, was impressive and felt nice. Very well finished and detailed. The case fit well and snapped onto the phone with authority, and was a precise fit.
Click to expand...
Click to collapse
that's exactly my point.
it's a fantastic case with seemingly quality leather and, like you mentioned, fits like a glove.
doesn't add much bulk, if any, it's perfectly grippy, looks fantastic, and seems like it could last a while.
makes me hope the tetded is half as well made and worth it.
we'll see.

too bad they don't have brown leather, just the garish colors. I've just about given up on slickwraps natural skins

jawiler said:
too bad they don't have brown leather, just the garish colors. I've just about given up on slickwraps natural skins
Click to expand...
Click to collapse
the premium flipcover cases have the nicer brown leather (multi tone).

I have the black slim back leather case from tetded for my 6p. It feels great in hand and is not plastic feeling, it feels like a natural leather wallet texture. I wish it was smooth leather though, but its as close as I can find to be like the apple leather cases. It took a few weeks to get to me though because its coming from Hong Kong. My wife likes it as well and had me order a white one for her, so its on the way too. The inside of the case has a microfiber insert to protect from rubbing the finish of the phone off.
Overall I like it and the phone is way less slippery with this case. Also I'm using it with the intelliarmor HD glass screen protector and both work great together.
Hope this helps.
Nick

I've ordered red one too. Can't wait!
Sent from my Nexus 6P using Tapatalk

slosrtnick said:
I have the black slim back leather case from tetded for my 6p. It feels great in hand and is not plastic feeling, it feels like a natural leather wallet texture. I wish it was smooth leather though, but its as close as I can find to be like the apple leather cases. It took a few weeks to get to me though because its coming from Hong Kong. My wife likes it as well and had me order a white one for her, so its on the way too. The inside of the case has a microfiber insert to protect from rubbing the finish of the phone off.
Overall I like it and the phone is way less slippery with this case. Also I'm using it with the intelliarmor HD glass screen protector and both work great together.
Hope this helps.
Nick
Click to expand...
Click to collapse
Does it have a magnet to close the flip cover? I have the folio case, but there is no magnet to keep the flip cover closed and it bugs me.

andy_rose said:
Does it have a magnet to close the flip cover? I have the folio case, but there is no magnet to keep the flip cover closed and it bugs me.
Click to expand...
Click to collapse
Unfortunately I cannot say about a flip case, as I have the one that only covers the back.

I don't like how it doesn't completely cover the edges on the top and bottom. I've had phones crack in those exact areas.

I just received the Dijon II case. It looks good, the cut-outs are fine, fits well, and you can easily remove it from the case. It does have a magnet to sleep/wakeup the screen BUT there are no magnets to keep the screen closed. The cover is not very light so it doesn't open by itself that easily.
They do make a Dijon III case that has a lip in the middle to keep the cover closed BUT there are no speakers holes like on the Dijon II, which makes it not possible to talk on the phone with the cover closed. If the Dijon III had those holes, I would get that version.
Time to wrap it up and put in under the tree...

Thinking of ordering one with flip.
But I'll await your reviews.
My question would be, does the flip stay closed when it should or does the flip stay half open when left on a table?
---------- Post added at 09:44 AM ---------- Previous post was at 09:31 AM ----------
Thinking of ordering one with the flip.
But I'll await your reviews.
My question would be, does the flip stay closed when you leave it on a table? Or is it like half open?
And does it stay open when you like it to, or does it self- close?

Mine stays closed and the lid lays completely flat. There is no magnetic clasp however so the lid will flop around when in use and I normally flop it around back while using the phone where it also lays flat. The power on/off is flawless. Extra bonus if you are in a trusted location because you can simply open it and swipe straight into the gui. I'd rate the quality as acceptable for the price. Doesn't feel cheap but you're not going to going to be wowed. I haven't had too many cases of this type but for what it's worth it is easily the least bulky of the lot.
Greatest weakness would be poor drop protection for a case of this kind. The ends have only modest protection and the cover may open when dipped exposing the screen since there is nothing keeping it closed.
Overall it is about what I expected and I'm happy with the purchase. It looks and feels nice, offers half decent protection even if it does lag behind similar cases, the power function is nice.