EvolutiveLabs is currently experimenting with a design for a RhinoShield case (presumably a backless bumper case).
A RhinoShield case will be made for the new Samsung Galaxy Note 7. We are experimenting on a new design for this device. If you are interested in knowing more, please do subscribe to this list and we will keep you updated once we have more information.
The current release date is September. Pre-Order will start later this August.
Anyone that's interested in being notified on the latest news/pre-order/etc.. can sign-up here:
http://www.evolutivelabs.com/products/galaxy-note-7-case
Looks like a decent case. I'll be looking forward to it.
Do any other backless bumper cases exist? I never found one for the Note 5 and would like to for the 7. The back on a bumper case is pointless and just adds thickness.
Lucent said:
Do any other backless bumper cases exist? I never found one for the Note 5 and would like to for the 7. The back on a bumper case is pointless and just adds thickness.
Click to expand...
Click to collapse
I ordered an Aluminum Backless Bumper from eBay a couple days ago. There's a few color options, but, I selected the black, should look nice with the Black Onyx model:
http://www.ebay.com/itm/182230578501
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks sweet. Though, I'd like at least like a thin back with the honeycomb pattern they advertise for some minor protection, since it's all glass on the back, too.
Im afraid of this cause what if it lands flat on jts back? No protection at all.
I thought the whole point of a bumper was to be raised on the front and back so it can land on flat surfaces on either side and not damage the front or back. That's what makes it a bumper and not a regular case.
Lucent said:
I thought the whole point of a bumper was to be raised on the front and back so it can land on flat surfaces on either side and not damage the front or back. That's what makes it a bumper and not a regular case.
Click to expand...
Click to collapse
+1 :good:
Exactly, that's the whole point of this thread.
KOLIOSIS said:
I ordered an Aluminum Backless Bumper from eBay a couple days ago. There's a few color options, but, I selected the black, should look nice with the Black Onyx model:
http://www.ebay.com/itm/182230578501
Click to expand...
Click to collapse
This case looks really nice, i will love to see it on the actual phone.
Jerseymase54 said:
This case looks really nice, i will love to see it on the actual phone.
Click to expand...
Click to collapse
I'll post some pix as soon as it arrives. :good:
KOLIOSIS said:
I'll post some pix as soon as it arrives. :good:
Click to expand...
Click to collapse
Please do. Thanks
Thinking about taking a razor blade to the back of one of these Ringke cases I got for $1 to see if I can make my own bumper case. If no one will make a real bumper, maybe we can at least find the fake bumper case that can be easily converted into a real bumper case.
Lucent said:
Thinking about taking a razor blade to the back of one of these Ringke cases I got for $1 to see if I can make my own bumper case. If no one will make a real bumper, maybe we can at least find the fake bumper case that can be easily converted into a real bumper case.
Click to expand...
Click to collapse
I'll probably do likewise,the Poetic Affinity case comes to mind.
The EvoLutive Labs/RhinoShield bumper for the HTC 10 adds too much width in the grip.
Some complained about the stiffness of the buttons as well.
I have no problem w/the latter,but,I did find the added width was too much & mine ended up in the land of misfit phone accessories after 1-2 days of use,which was a bummer @ $30..............
This was my favorite case for the note 5, can't wait to try this out especially since they didn't make one for the SD Edge
Good news! The Ringke Fusion, Fusion Mirror, and Frame are all two different types of plastic glued together, so with some bending and a razor blade to start the cut, you can separate them and throw away the back pretty cleanly. I don't have my Note 7 yet to see if it still keeps the camera off the table, and I'm not sure how much I stretched it pulling them apart, but it looks to be exactly what I wanted. Picture attached. These were $1 or $2 with coupon on Amazon a week or two ago. The fourth one I have from Ringke, the Air, is all TPU with no clear line to cut through, so I'm not even going to attempt making that one backless.
Lucent said:
Good news! The Ringke Fusion, Fusion Mirror, and Frame are all two different types of plastic glued together, so with some bending and a razor blade to start the cut, you can separate them and throw away the back pretty cleanly. I don't have my Note 7 yet to see if it still keeps the camera off the table, and I'm not sure how much I stretched it pulling them apart, but it looks to be exactly what I wanted. Picture attached. These were $1 or $2 with coupon on Amazon a week or two ago. The fourth one I have from Ringke, the Air, is all TPU with no clear line to cut through, so I'm not even going to attempt making that one backless.
Click to expand...
Click to collapse
Well the question now will be...how well it will hold the phone..since it's just tpu..
I would imagine taking it out of your pockets will dislodge it from your make-shift bumper case
Sent from my SM-N910P using Tapatalk
kwazytazz said:
Well the question now will be...how well it will hold the phone..since it's just tpu..
I would imagine taking it out of your pockets will dislodge it from your make-shift bumper case
Click to expand...
Click to collapse
You are correct. The Fusion and Fusion Mirror were too flimsy on their own. The Frame case, however, with its plastic reinforcement wrapping around the TPU, is pretty decent. If you're going to modify a case to turn it into a backless bumper, I recommend only the Ringke Frame of those.
Lucent said:
You are correct. The Fusion and Fusion Mirror were too flimsy on their own. The Frame case, however, with its plastic reinforcement wrapping around the TPU, is pretty decent. If you're going to modify a case to turn it into a backless bumper, I recommend only the Ringke Frame of those.
Click to expand...
Click to collapse
Have you tried it with the frame or just guessing? I'm very curious if this will work because I don't like cases, I prefer bumpers.
skillzo1 said:
Im afraid of this cause what if it lands flat on jts back? No protection at all.
Click to expand...
Click to collapse
I'm with you. It looks good for sure. But because of the lack of back support, I'll have to pass.
Although looking forward to seeing the pics.
The Frame does work and is sturdy. I'll take a photo soon. Not sure what the advantage of back support is. We don't have front support. We have the lip sticking out on both sides to protect both equally.
Related
If you're looking for an ultra-thin TPU case for your brand new Galaxy S4, look no further. The SPIGEN SGP Bounce is the thinnest TPU case I've ever had. Although the somewhat sparkly back isn't for everyone, I believe it adds a little design flare that separates it from the sea of bland cases. It can be yours for only $10.99.
Stay tuned, we will be giving this case away this week!
Nice review. Do you have access to any other Spigen cases for the S4 other than this one and the Ultra Fit?
Sent from my iPad using Tapatalk HD
I'm confused...
Is the Bounce the same as the Ultra Capsule?
I purchased this case and received it today. I do not recommend it at all, I'll be returning mine as soon as I can get a different case.
Cons:
-- It's mentioned in the review above, but the case is loose on the S4, mine's so loose that the lip comes off the front face of the device fairly easily.
-- The seams around the case aren't smooth, feels cheap.
-- Slippery back, as slippery as the default plastic on the device.
Pros:
-- Slim, doesn't add much to the device.
-- Cutouts seem well positioned, including the IR blaster hole.
The pros don't really outweigh the con of the case not actually staying on the device.
jtc276 said:
Nice review. Do you have access to any other Spigen cases for the S4 other than this one and the Ultra Fit?
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
We ordered at least two more SPIGEN cases, but they won't be in stock until the end of April or beginning of May.
da_hool said:
I'm confused...
Is the Bounce the same as the Ultra Capsule?
Click to expand...
Click to collapse
The only difference I see is that the Ultra Capsule includes a screen protector and Jelly Bean Button(whatever that is). The site also states that the Ultra Capsule is shock absorbent, while the Amazon description for the Bounce does not. Oh, and the Ultra Capsule is $24.99 verses $10.99 for the Bounce.
We will review both cases.
jonsoini said:
I purchased this case and received it today. I do not recommend it at all, I'll be returning mine as soon as I can get a different case.
Cons:
-- It's mentioned in the review above, but the case is loose on the S4, mine's so loose that the lip comes off the front face of the device fairly easily.
-- The seams around the case aren't smooth, feels cheap.
-- Slippery back, as slippery as the default plastic on the device.
Pros:
-- Slim, doesn't add much to the device.
-- Cutouts seem well positioned, including the IR blaster hole.
The pros don't really outweigh the con of the case not actually staying on the device.
Click to expand...
Click to collapse
Is the primary mic cutout off center?
AndroidFanNetwork said:
If you're looking for an ultra-thin TPU case for your brand new Galaxy S4, look no further. The SPIGEN SGP Bounce is the thinnest TPU case I've ever had. Although the somewhat sparkly back isn't for everyone, I believe it adds a little design flare that separates it from the sea of bland cases. It can be yours for only $10.99.
Stay tuned, we will be giving this case away this week!
Click to expand...
Click to collapse
Is this thicker or thinner than the ultra fit?
What is the thinnest gs4 case you have reviewed so far?
Sent from my SAMSUNG-SGH-I747
phositadc said:
Is this thicker or thinner than the ultra fit?
What is the thinnest gs4 case you have reviewed so far?
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
Honestly, they're both about the same thickness. These two would be the thinnest cases so far.
The Bounce weighs 0.6 of an ounce and the Ultra Fit 0.5.
AndroidFanNetwork said:
Honestly, they're both about the same thickness. These two would be the thinnest cases so far.
The Bounce weighs 0.6 of an ounce and the Ultra Fit 0.5.
Click to expand...
Click to collapse
So both are thinner than diztronic, cruzerlite, etc?
Sent from my SAMSUNG-SGH-I747
phositadc said:
So both are thinner than diztronic, cruzerlite, etc?
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
Correct. I have a Diztronic case on my desk that I'll be reviewing within the next few days, and I can say with certainty that the SPIGEN cases are thinner.
I have the white version of this case for when my phone arrives early next week. I hope it is not too loose like you've mentioned! Looks very nice as a case all in all.
The mic cutout on mine is right on center, no issues there.
UPDATE: I've had this case on my phone for one day (less than 24 hours). It has rubbed the silver paint off ~30% of the front rim of my phone. STAY AWAY from this case unless you want the silver paint on your phone rubbed off. If I can I'll post pics later. My brand new phone was pristine until this case. Bummer.
jonsoini said:
UPDATE: I've had this case on my phone for one day (less than 24 hours). It has rubbed the silver paint off ~30% of the front rim of my phone. STAY AWAY from this case unless you want the silver paint on your phone rubbed off. If I can I'll post pics later. My brand new phone was pristine until this case. Bummer.
Click to expand...
Click to collapse
Any pics?
jonsoini said:
UPDATE: I've had this case on my phone for one day (less than 24 hours). It has rubbed the silver paint off ~30% of the front rim of my phone. STAY AWAY from this case unless you want the silver paint on your phone rubbed off. If I can I'll post pics later. My brand new phone was pristine until this case. Bummer.
Click to expand...
Click to collapse
I knew that chrome dipped plastic lip would be a problem. If a TPU case is a problem already, I have a feeling any hard snap case will chew up the bezel pretty good.
jonsoini said:
UPDATE: I've had this case on my phone for one day (less than 24 hours). It has rubbed the silver paint off ~30% of the front rim of my phone. STAY AWAY from this case unless you want the silver paint on your phone rubbed off. If I can I'll post pics later. My brand new phone was pristine until this case. Bummer.
Click to expand...
Click to collapse
Pics would be very useful
jonsoini said:
UPDATE: I've had this case on my phone for one day (less than 24 hours). It has rubbed the silver paint off ~30% of the front rim of my phone. STAY AWAY from this case unless you want the silver paint on your phone rubbed off. If I can I'll post pics later. My brand new phone was pristine until this case. Bummer.
Click to expand...
Click to collapse
Pics please!
Pics of the damage
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 09:11 PM ---------- Previous post was at 09:07 PM ----------
Dude..no...way... that's terrible. Sorry to see that...
+1 , you need to go to Samsung. This device has been out mere days.
xdacommenter said:
Dude thats BAD. No way the case did that though. That has to be a manufacturing issue. Unless you got a defect Samsung is in for some trouble.
Click to expand...
Click to collapse
The lip of the case which touches the phone feels very rough (I have a white one case on me).
I would not be surprised if the case is what caused that damage, shame on SPIGEN if so, I'm not gonna be using my case until this is sorted out.
I always buy a case before I buy my device (I'm just weird like that lol)... so I'm looking for a good protective case that doesn't add to much bulk to my S5. Preferably is raised a littl (to protect against screen cracking if it falls), and also camera and LED flash are protected as well on the back.
Thanks in advance to any suggestions!
I highly recommend the Urban Armor Gear cases. I had one on the S3/S4 and they are great. Protected it from many drops and adds very little bulk compared the amount of protection. Mine for the S5 should be here any minute now (on truck for delivery).
I use Body Glove. It's slim and protects all corners. Also, it doesn't interfere with the fingerprint scanner nor HRM.
Had otterbox, too bulky. Then found Spivey NEO Hybrid case for nexus 5, amazing case, slim yet very protective (dropped nexus yet only little scratch on case but not on phone). Now use Spigen Neo for this phone, check it out.
While you're checking out the Spigen web site, also take a look at their Slim Armor and Tough Armor cases.
I've got a Tough Armor case on the way through the glacial US postal service. Hopefully, it'll show up tomorrow like the tracking information indicates.
SO far I have narrowed it down to these 4 cases, but not sure on the color yet!! But if anyone has any more recommendations to make my decision tougher, I'm all for it!! Looking for the best case that won't add to much bulk, but will protect my screen/device from falls, and also not interfere with the fingerprint scanner as well!
#1
#2
#3
#4
+1 for the Urban Armor Gear. Heavy duty protection with minimal bulk.
Another for uag. Had mine waiting at home for me when I came back with my s5. Had one on my s3 and it took care of my phone
Dark_Vortex said:
While you're checking out the Spigen web site, also take a look at their Slim Armor and Tough Armor cases.
I've got a Tough Armor case on the way through the glacial US postal service. Hopefully, it'll show up tomorrow like the tracking information indicates.
Click to expand...
Click to collapse
The Tough Armor is amazing! I got it tuesday, it's gorgeous and surprisingly slim. Actually makes the phone more comfortable to hold for games. I'll post some pics later. The Gunmetal one is the bomb on the charcoal s5.
dawest said:
The Tough Armor is amazing! I got it tuesday, it's gorgeous and surprisingly slim. Actually makes the phone more comfortable to hold for games. I'll post some pics later. The Gunmetal one is the bomb on the charcoal s5.
Click to expand...
Click to collapse
I also got the Gunmetal one for my charcoal S5 and I agree with your assessment!
Joe0113 said:
SO far I have narrowed it down to these 4 cases, but not sure on the color yet!! But if anyone has any more recommendations to make my decision tougher, I'm all for it!! Looking for the best case that won't add to much bulk, but will protect my screen/device from falls, and also not interfere with the fingerprint scanner as well!
#1
#2
#3
#4
Click to expand...
Click to collapse
I've tried all of these at 1 point or another... the thinnest and best protection is and will always be a tight TPU.
http://www.amazon.com/Diztronic-Mat...1846&sr=1-1&keywords=galaxy+s5+case+diztronic
i bought the Diztronic again, it is the thinnest case i know that actually protects against light drops. all the other onces look nice but i've cracked a few in my days, or they were just too bulky.
jucytec said:
I've tried all of these at 1 point or another... the thinnest and best protection is and will always be a tight TPU.
http://www.amazon.com/Diztronic-Mat...1846&sr=1-1&keywords=galaxy+s5+case+diztronic
i bought the Diztronic again, it is the thinnest case i know that actually protects against light drops. all the other onces look nice but i've cracked a few in my days, or they were just too bulky.
Click to expand...
Click to collapse
This one is the same thickness but has a realy nice design
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.amazon.com/Cruzerlite-Flame-Case-Samsung-Galaxy/dp/B00ITE3N80
joelmic said:
This one is the same thickness but has a realy nice design
http://www.amazon.com/Cruzerlite-Flame-Case-Samsung-Galaxy/dp/B00ITE3N80
Click to expand...
Click to collapse
Had tried cruzerlite on my old gnex, diz was a tighter fit... but i do like the design!
andROIDS said:
+1 for the Urban Armor Gear. Heavy duty protection with minimal bulk.
Click to expand...
Click to collapse
So I have the UAG case. But I am finding that NFC doesn't work as reliably and the finger sensor is very hard to swipe correctly with the case because of the lip around the case/phone. So I may be returning it.
Sent from my SM-T320 using Tapatalk
dwd3885 said:
So I have the UAG case. But I am finding that NFC doesn't work as reliably and the finger sensor is very hard to swipe correctly with the case because of the lip around the case/phone. So I may be returning it.
Sent from my SM-T320 using Tapatalk
Click to expand...
Click to collapse
I have the Trident Aegis which might be a good alternative for you as it has a soft flexible rubber lip on the bottom that flexes when you swipe your finger.
Sent from my SM-G900W8 using XDA Premium 4 mobile app
Joe0113 said:
SO far I have narrowed it down to these 4 cases, but not sure on the color yet!! But if anyone has any more recommendations to make my decision tougher, I'm all for it!! Looking for the best case that won't add to much bulk, but will protect my screen/device from falls, and also not interfere with the fingerprint scanner as well!
#1
#2
#3
#4
Click to expand...
Click to collapse
i got #3. its definitely thin that its doesnt even go past back camera but that part has its lil hump to protect it too
to me it makes phone feel more solid and looks alot better. i got the white s5 and white case
had #2 b4 on s4 and note3 and its definitely thicker
Protective case
I bought from T-Mobile Tech 21 Impactology and is very thin and protects great
I have the Spigen slim armor on my phone and love it. I hate thick cases and usually find the thinnest I can. I went on a chance and love this one. IT is a very tight fit and adds minimal bulk. My wife bought an incipio and now wants my case as it is a lot less bulkier.
Take a look at the otterbox commuter series.
http://www.amazon.com/Otterbox-Comm...3&sr=1-4&keywords=galaxy+s5+otterbox+commuter
I had the NeoHybrid for the S4. I loved it for the first month, but after that the paint started wearing off tremendously on the edges. It was an official Spigen directly from them, so I was not too thrilled with that. They don't seem to dye the plastic, they paint it. At that time, they were also charging around $29+ for the case.
Something to consider, as I doubt they changed this for the S5. I might give their Tough Armor a try, as it doesn't have the edges of the NeoHybrid, so the breakdown shouldn't be as severe.
Those of you that have bought the ultra thin transparent tpu, link me which you bought, do you like it and mind sharing a picture of it on?
I am considering these;
http://www.ebay.com/itm/Clear-Hybrid-Rubber-Silicone-Protective-Case-Cove-For-LG-V10-/131646499835
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This one has it's edges not over lapping to the bezel, allowing for your hand to make contact with the metal frame, finger print sensor should work with it.
http://www.ebay.com/itm/LG-V10-Case...licone-TPU-Skin-Protective-Case-/262109150750
But these are some I'm considering. I've bought a few for every phone I've owned, some fit nicely others are too lose or flimsy. Too thick and or the top portion around the face bezel is too wide/thick.
http://www.ebay.com/itm/For-LG-V10-...ard-Protective-Clear-Case-Cover-/252147455463
http://www.ebay.com/itm/For-LG-V10-F600-Glossy-Transparent-Clear-Skin-Case-Cover-/291608986957
http://www.ebay.com/itm/LG-V10-G4-P...-FAST-SHIP-TPU-COVER-CASE-Clear-/272035732263
http://www.ebay.com/itm/High-Gloss-...ent-Clear-Skin-Cover-for-LG-V10-/121804494028
http://www.ebay.com/itm/For-LG-V10-Soft-TPU-SKIN-Case-Colors-/401022492642
I usually buy mercury / goosperry gel/jelly tpu in Hot Pink and Yellow Orange, but none listed for sale yet, so I went with this one that's also from South Korea.
http://www.ebay.com/itm/261566349763?_trksid=p2057872.m2749.l2649&var=560869644570
clockcycle said:
Those of you that have bought the ultra thin transparent tpu, link me which you bought, do you like it and mind sharing a picture of it on?
I am considering these;
http://www.ebay.com/itm/Clear-Hybrid-Rubber-Silicone-Protective-Case-Cove-For-LG-V10-/131646499835
Click to expand...
Click to collapse
Clockcycle if you end up ordering this please post a follow up note, I would love to hear your hands on impressions of this case. Right now I'm using a handmade genuine cow leather sleeve which I really like. It was made by a small family owned shop in Poland (he sends a little flyer with each order detailing his business), he uses really thick good quality leather which is hand dyed. The one I ordered is black with white stitching and the inside has a soft lining to prevent scrathes. You can see the natural grain in the leather making each sleeve/pouch unique.
I've used the sleeve for my last couple of phones and it has worn very nicely and offers scratch protection when the phone is in your pocket.
If anyone is interested post a reply message and I'll look up the order information with some pics when I get home from work.
Edit: Additional information on the Leather Sleeve available in the link below:
http://forum.xda-developers.com/showpost.php?p=63762941&postcount=153
gheymann said:
Clockcycle if you end up ordering this please post a follow up note, I would love to hear your hands on impressions of this case..
Click to expand...
Click to collapse
I did order this one. Will do a hands on picture review when I get it.
@gheymann here it is, it's exactly like the one I got and use the most on my LG G4, bought the "gray" which ended up being smoked, thankfully as it's what I wanted.
Edit; tested finger print sensor, works fine.
ignore the screen protector, I just put that custom cut one because they are just bad.
clockcycle said:
@gheymann here it is, it's exactly like the one I got and use the most on my LG G4, bought the "gray" which ended up being smoked, thankfully as it's what I wanted.
ignore the screen protector, I just put that custom cut one because they are just bad.
Click to expand...
Click to collapse
This case is advertised as being 0.2mm thick (?) or is that the height of the raised lip? I have the Spigen Liquid Crystal case and it is a mm thick with a 0.8mm raised lip. I'm looking for something a little thinner. This case might just be it
BurtGummer said:
This case is advertised as being 0.2mm thick (?) or is that the height of the raised lip? I have the Spigen Liquid Crystal case and it is a mm thick with a 0.8mm raised lip. I'm looking for something a little thinner. This case might just be it
Click to expand...
Click to collapse
EDITED
It can't get any thinner than this and still hold on to the phone. If I put a credit card on the face then edge it up to the lip, they are flush.
You might be right, after really looking at the case on my G4, it could be slightly thinner. I have one thinner than the one on my G4 now, it's too thin. Flimsy, sides flap (it's the 0.3mm that has the tiny dots inside the back).
Wonder how this one would fit? http://www.ebay.com/itm/Ultra-thin-...ase-Cover-For-Various-LG-Models-/181508363471
clockcycle said:
It can't get any thinner than this and still hold on to the phone. If I put a credit card on the face then edge it up to the lip, they are flush.
Click to expand...
Click to collapse
How is the fit?
BurtGummer said:
How is the fit?
Click to expand...
Click to collapse
It almost exactly like the case I used almost exclusively on my LG G4 by coincidence (it's ever so slightly thicker, which is good, since the G4's was almost too thin. Sides bulge out when running my thumb over the edge on purposely to check its hold). Snug, with enough material to hold on to the side without bulging/flexing/flabbing out. It doesn't change the bulk "much". Sides are grippier, but back is slipperier that stock battery back. It has an interesting lip surrounding the camera, it's quite a good added feature.
I haven't used the fingerprint feature, but I dislike extra unlocking steps. So I can not say if it interferes or not.
Spigen.
I put on two foil tapes to help the fingerprint sensor.
clockcycle said:
@gheymann here it is, it's exactly like the one I got and use the most on my LG G4, bought the "gray" which ended up being smoked, thankfully as it's what I wanted.
ignore the screen protector, I just put that custom cut one because they are just bad.
Click to expand...
Click to collapse
Thanks for taking the time to post all of the great pics clockcycle, I'm glad it's what you wanted, I would prefer the clear myself but nice.... Thanks again!
gheymann said:
Thanks for taking the time to post all of the great pics clockcycle, I'm glad it's what you wanted, I would prefer the clear myself but nice.... Thanks again!
Click to expand...
Click to collapse
Ive ordered a few more clear and colored tpu.
More keep coming out. I think I want to find something even thinner too.
clockcycle said:
@gheymann here it is, it's exactly like the one I got and use the most on my LG G4, bought the "gray" which ended up being smoked, thankfully as it's what I wanted.
ignore the screen protector, I just put that custom cut one because they are just bad.
Click to expand...
Click to collapse
clockcycle said:
Ive ordered a few more clear and colored tpu.
More keep coming out. I think I want to find something even thinner too.
Click to expand...
Click to collapse
I saw an ad for Ultra-thin slim 0.3mm Soft Transparent Gel Skin TPU Case Cover For LG V10 on Ebay for only .99 including shipping. I'm sure they aren't the highest quality but at that price who cares, let's see what they look like. They are coming from China so I probably won't see them till mid-December!
Seller's Feature list:
New Compatible with : For LG V10
The Case be made 0.3mm TPU (not very soft) ,advance micro particles material technology for case inside body with Anti-Finger and Anti-Wetting.
Precisely cut openings to allow full access to all the functions of your phone
Does not include Phone
Package Content:
1x For LG V10 Case Cover
Let's see I was pleasantly surprised by these before for another phone, they were almost like a prophylactic:laugh: for the phone!!!
Here is the link to the sellers auction, I ordered a couple of them http://goo.gl/3auhvr
gheymann said:
I saw an ad for Ultra-thin slim 0.3mm Soft Transparent Gel Skin TPU Case Cover For LG V10 on Ebay for only .99 including shipping. I'm sure they aren't the highest quality but at that price who cares, let's see what they look like. They are coming from China so I probably won't see them till mid-December!
Here is the link to the sellers auction, I ordered a couple of them http://goo.gl/3auhvr
Click to expand...
Click to collapse
I bought some of these as well, but I didn't buy any that wouldn't be delivered this year..
EDIT: Bought these, will post pictures and opinion once I get them
http://www.ebay.com/itm/252147455463
http://www.ebay.com/itm/171739242672
http://www.ebay.com/itm/361427169238
clockcycle said:
It almost exactly like the case I used almost exclusively on my LG G4 by coincidence (it's ever so slightly thicker, which is good, since the G4's was almost too thin. Sides bulge out when running my thumb over the edge on purposely to check its hold). Snug, with enough material to hold on to the side without bulging/flexing/flabbing out. It doesn't change the bulk "much". Sides are grippier, but back is slipperier that stock battery back. It has an interesting lip surrounding the camera, it's quite a good added feature.
Click to expand...
Click to collapse
Thank you and this is the issue with the Spigen Liquid Crystal case. It hugs the metal side rails very loosely and is easily peeled by running thumb over edge. I went ahead and ordered yours in the same color. Just to be sure, below is yours correct?
http://www.ebay.com/itm/13164649983...49&var=431038294389&ssPageName=STRK:MEBIDX:IT
BurtGummer said:
Thank you and this is the issue with the Spigen Liquid Crystal case. It hugs the metal side rails very loosely and is easily peeled by running thumb over edge. I went ahead and ordered yours in the same color. Just to be sure, below is yours correct?
http://www.ebay.com/itm/13164649983...49&var=431038294389&ssPageName=STRK:MEBIDX:IT
Click to expand...
Click to collapse
Yes, I ordered Gray, which is Smoked Transparent.
BurtGummer said:
Thank you and this is the issue with the Spigen Liquid Crystal case. It hugs the metal side rails very loosely and is easily peeled by running thumb over edge. I went ahead and ordered yours in the same color. Just to be sure, below is yours correct?
http://www.ebay.com/itm/13164649983...49&var=431038294389&ssPageName=STRK:MEBIDX:IT
Click to expand...
Click to collapse
I just received this case today fit is pretty good with no finger print problem.Ordered it on the 12th and received it today
clockcycle said:
EDIT: Bought these, will post pictures and opinion once I get them
http://www.ebay.com/itm/171739242672
Click to expand...
Click to collapse
0.3 mm! I would imagine this one to be pretty flimsy. Please update when you can. I am interested in this one as well
BurtGummer said:
0.3 mm! I would imagine this one to be pretty flimsy. Please update when you can. I am interested in this one as well
Click to expand...
Click to collapse
I got 2 previous ones, I posted in my List thread with pictures. I'll let you know when I get this one.
clockcycle said:
Yes, I ordered Gray, which is Smoked Transparent.
Click to expand...
Click to collapse
Mine arrived today. This case is impressively thin probably 0.4-0.5 mm thick--a smidgen thicker than your typical tgsp. The fit is also impressively tight for such a thin plastic. Thanks again bud :good:
hey, all...
posted this in another thread...but, received a lack of response.
am hoping a little more visibility might draw someone out.
if not for this specific case, then for another of their products.
looking like a case i'd like to buy, but would love any feed back at all...
http://www.tetded.com/home/en/nexus...e-nexus-6p-huawei-nexus-6p-caen-lc-black.html
many thanks...
cheers.
I have no experience with this brand and it doesn't seem to be common in the USA, but looking at their site, they actually have a flip case for the 6P with SLEEP FUNCTION! Other than the grip-of-death folio case from google, I could not find any flip cases with the rare-as-unicorns sleep function. I almost gave up until I came across your post. Seriously, I was to the point where I was thinking of gutting a flip case to insert a magnet into it. Thank you!
I just ordered this and I hope I get it before christmas (for the misses):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's not cheap, but it's still cheaper than the folio case and seems much better looking. I'll update when I get it. I think the maker is in Hong Kong so it'll take at least a week.
http://imgur.com/a/L6BQ2
Here's few pictures that someone else took from Tetded leather case (without flipcover). Apparently it feels quite good (not slippery at all).
I remember the g3 community have alot of people buying the case. Tetded makes cases for most phones so the reviews are all over the place.
I purchased a folio case for my Nexus 6 from this company and was impressed with the quality. I ultimately didn't use it much as I decided that the minimal bulk of the case added to the already overly bulky phone made carrying it in my pocket uncomfortable. Oh, and the back of the case was thick enough (leather over a plastic case mold) that it prevented wireless charging on the 6 to work.
Most curious of the feel of the leather. nothing worse then cheap plasticy leather
^^^...that's a great point.
needless to say...curiosity got the better of me and i ordered one.
when it gets here...i'll post a review.
as i mentioned...the apple case for the 6 is pretty nice. it's actually ALL leather.
feels great and the phone sits well inside of it.
this one is actually leather seemingly wrapped around a plastic shell?
so, we'll see.
i think it might be a little bulky/thick for my tastes...
but, i'm willing to give it a shot.
in the meantime...my adopted protective case arrives later today.
$10 off deal during cyber monday.
cipher77 said:
^^^...that's a great point.
needless to say...curiosity got the better of me and i ordered one.
when it gets here...i'll post a review.
as i mentioned...the apple case for the 6 is pretty nice. it's actually ALL leather.
feels great and the phone sits well inside of it.
this one is actually leather seemingly wrapped around a plastic shell?
so, we'll see.
i think it might be a little bulky/thick for my tastes...
but, i'm willing to give it a shot.
in the meantime...my adopted protective case arrives later today.
$10 off deal during cyber monday.
Click to expand...
Click to collapse
look forward to the review!
The one for the 6, which looks exactly like this model for the 6P, is basically a ultra thin case (think Spigen Thin-Fit) with a leather skin. The leather, at least on the one for my 6, was impressive and felt nice. Very well finished and detailed. The case fit well and snapped onto the phone with authority, and was a precise fit.
Psyclism said:
The one for the 6, which looks exactly like this model for the 6P, is basically a ultra thin case (think Spigen Thin-Fit) with a leather skin. The leather, at least on the one for my 6, was impressive and felt nice. Very well finished and detailed. The case fit well and snapped onto the phone with authority, and was a precise fit.
Click to expand...
Click to collapse
that's exactly my point.
it's a fantastic case with seemingly quality leather and, like you mentioned, fits like a glove.
doesn't add much bulk, if any, it's perfectly grippy, looks fantastic, and seems like it could last a while.
makes me hope the tetded is half as well made and worth it.
we'll see.
too bad they don't have brown leather, just the garish colors. I've just about given up on slickwraps natural skins
jawiler said:
too bad they don't have brown leather, just the garish colors. I've just about given up on slickwraps natural skins
Click to expand...
Click to collapse
the premium flipcover cases have the nicer brown leather (multi tone).
I have the black slim back leather case from tetded for my 6p. It feels great in hand and is not plastic feeling, it feels like a natural leather wallet texture. I wish it was smooth leather though, but its as close as I can find to be like the apple leather cases. It took a few weeks to get to me though because its coming from Hong Kong. My wife likes it as well and had me order a white one for her, so its on the way too. The inside of the case has a microfiber insert to protect from rubbing the finish of the phone off.
Overall I like it and the phone is way less slippery with this case. Also I'm using it with the intelliarmor HD glass screen protector and both work great together.
Hope this helps.
Nick
I've ordered red one too. Can't wait!
Sent from my Nexus 6P using Tapatalk
slosrtnick said:
I have the black slim back leather case from tetded for my 6p. It feels great in hand and is not plastic feeling, it feels like a natural leather wallet texture. I wish it was smooth leather though, but its as close as I can find to be like the apple leather cases. It took a few weeks to get to me though because its coming from Hong Kong. My wife likes it as well and had me order a white one for her, so its on the way too. The inside of the case has a microfiber insert to protect from rubbing the finish of the phone off.
Overall I like it and the phone is way less slippery with this case. Also I'm using it with the intelliarmor HD glass screen protector and both work great together.
Hope this helps.
Nick
Click to expand...
Click to collapse
Does it have a magnet to close the flip cover? I have the folio case, but there is no magnet to keep the flip cover closed and it bugs me.
andy_rose said:
Does it have a magnet to close the flip cover? I have the folio case, but there is no magnet to keep the flip cover closed and it bugs me.
Click to expand...
Click to collapse
Unfortunately I cannot say about a flip case, as I have the one that only covers the back.
I don't like how it doesn't completely cover the edges on the top and bottom. I've had phones crack in those exact areas.
I just received the Dijon II case. It looks good, the cut-outs are fine, fits well, and you can easily remove it from the case. It does have a magnet to sleep/wakeup the screen BUT there are no magnets to keep the screen closed. The cover is not very light so it doesn't open by itself that easily.
They do make a Dijon III case that has a lip in the middle to keep the cover closed BUT there are no speakers holes like on the Dijon II, which makes it not possible to talk on the phone with the cover closed. If the Dijon III had those holes, I would get that version.
Time to wrap it up and put in under the tree...
Thinking of ordering one with flip.
But I'll await your reviews.
My question would be, does the flip stay closed when it should or does the flip stay half open when left on a table?
---------- Post added at 09:44 AM ---------- Previous post was at 09:31 AM ----------
Thinking of ordering one with the flip.
But I'll await your reviews.
My question would be, does the flip stay closed when you leave it on a table? Or is it like half open?
And does it stay open when you like it to, or does it self- close?
Mine stays closed and the lid lays completely flat. There is no magnetic clasp however so the lid will flop around when in use and I normally flop it around back while using the phone where it also lays flat. The power on/off is flawless. Extra bonus if you are in a trusted location because you can simply open it and swipe straight into the gui. I'd rate the quality as acceptable for the price. Doesn't feel cheap but you're not going to going to be wowed. I haven't had too many cases of this type but for what it's worth it is easily the least bulky of the lot.
Greatest weakness would be poor drop protection for a case of this kind. The ends have only modest protection and the cover may open when dipped exposing the screen since there is nothing keeping it closed.
Overall it is about what I expected and I'm happy with the purchase. It looks and feels nice, offers half decent protection even if it does lag behind similar cases, the power function is nice.
I am doing a poll as well for all the protective case. Feel free to choose your best Note 9 case.
1) Note 9 UAG Plasma Ash
Back
Military design and the combination of rubber & polycarbonate. There are 5 rubber type of screws which I think is just the design of the case. The four corners are slightly bigger, so there will be a small gap between the surface and the back of the case which to avoid being scratch. Besides, the 4 corners will be heavier, therefore when you drop your phone , the gravity force will caused the phone to drop at the corner so that your screen will be safe. Besides, there is a slanting design for the fingerprint sensor area which I bet will make you easier to reach & feel the sensor. The Plasma Ash if blended nicely with the Black Panther Note 9.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Inner
There is honeycomb pattern for the inner part of the case which I suppose it is for shock absorb.
Top & Bottom
Ports and button cutout is perfect.
Side & Raise
There will a raise near the top & the bottom of the case which will protect your phone when you drop it. Button feedback is good while the case is grippy too. It's feel good in the hand!
Overall is a good quality case and I highly recommended to those who wish to worry-free about their mightly Note 9. I will rate this case 9.5/10.
2) RhinoShield Solid Suit (Carbon Fibre series)
All the cutouts are perfectly aligned. Home button, volume buttons & Bixby button are clicky but not as tactile as UAG case. Access of SPEN is easy, however you are require to use your finger to poke the cutout in order for you to get the SPEN. I love the carbon fibre textures at the back of the case which give you the premium look of your phone. I will say the case feel really good in my hand with little grippy feel and they use minor rough matte finish for both side of the case. There are honeycomb pattern inside the phone which it suppose to absorb the force when you drop your phone.
Overall is a great case with premium look. Besides, it has military standard drop test 'checked' so you should not worry about the protection. There are lips which cover the top & bottom of the front screen which will protect your phone well if you drop your phone front face. Definitely a major-go for the case. This case definitely deserve the rate 9.5/10. Below are all the photos :
3) RhinoShield CrashGuard
This is a well-known bumper case for it's great protection with minimal bulky. All the cutouts are perfectly aligned. Buttons are clicky, in fact the home button even have better tactile feeling compare with SolidSuit Series. SPEN access same with SolidSuit. There are lips at the top and the bottom of the case either back and front which helps to protect your phone when you drop your phone in either direction.
There is a free back protector come with the case. Got my Camo Dbrand Skin, it just fit perfectly to the case. It's going to be my best combo so far balance in between beauty and protection. This case definitely for people who wish to have a protective case while showing off the back and thinnest of your phone. The side of the case using the rough matte finish too which gave you grippy feel. Overall, I will rate this case 9/10. You can refer all the photos as below:
4) Supcase UB Style
This is a hybrid case between TPU & Polycarbonate which also have military drop standard. It has a clear plastic back which allow you to show off your phone without compromise the drop protection. All the cutouts are perfectly aligned and buttons are clicky too. However, I am dislike the flat buttons design which sometimes causing me hard to locate the buttons especially for a big long phone like Note 9. As usual, there will be minor rainbow effect at the back if you are not using any skin or back protector. SPen cutouts is easy to access.
There are lips at the bottom and top of your phone which protect your phone when drop it face down. However, this case is as slippery as soap. The side finishing is smooth TPU which makes the case extremely slippery if you tend to sweat a lot. Overall, I will rate this case 7.5/10.
Check out all the photos below:
Conclusion
1) Ultimate Protection with Unique Look = UAG Plasma Ash
2) Great Protection with Premium Look = Rhinoshield SolidSuit
3) Great Protection with Sleek Look = Rhinoshield CrashGuard (personal preference)
Why are you posting a review of a case without a phone to test with? Saying things like the port cutouts are good and accurate? You can't possibly know this before having the device in-hand to test the fitment. This is premature.
Hope they come out with more colors, great cases.
Nice, did UAG ship it from Hong Kong or the US?
Is that thing bowed like a banana ?
felloffthetruck said:
Nice, did UAG ship it from Hong Kong or the US?
Is that thing bowed like a banana ?
Click to expand...
Click to collapse
For International purchase, it will ship from HK Warehouse. For US purchase it will ship from US Warehouse. You can get the info from the below link : https://urbanarmorgear.com/pages/shipping-information
By the way, what you mean that "bowed like a banana"? haha
allklrnoflr said:
Hope they come out with more colors, great cases.
Click to expand...
Click to collapse
Hope so too. Normally the only the "Fruit" phone will get more colors & series.
disturbd1 said:
Why are you posting a review of a case without a phone to test with? Saying things like the port cutouts are good and accurate? You can't possibly know this before having the device in-hand to test the fitment. This is premature.
Click to expand...
Click to collapse
Yeah bro. I had edited my post. Will update the review again once I got the phone in hand.
lvoonjian8888 said:
For International purchase, it will ship from HK Warehouse. For US purchase it will ship from US Warehouse. You can get the info from the below link : https://urbanarmorgear.com/pages/shipping-information
By the way, what you mean that "bowed like a banana"? haha
Click to expand...
Click to collapse
Bowed like a banana = does not lay flat, curved. Looks like that in your picture.
felloffthetruck said:
Bowed like a banana = does not lay flat, curved. Looks like that in your picture.
Click to expand...
Click to collapse
Nope, that case did lay flat. Will update the post again once I got the phone.
Love UAG. Sad they seem to have discontinued the Pathfinder series. Now it's only the plyo, plasma and the premium monarch lines.
Love the white and black stormtrooper pathfinder on my S8+ and iPhone X.
twisted_mind said:
Love UAG. Sad they seem to have discontinued the Pathfinder series. Now it's only the plyo, plasma and the premium monarch lines.
Love the white and black stormtrooper pathfinder on my S8+ and iPhone X.
Click to expand...
Click to collapse
Maybe they will release it later on because S9 & S9+ got the Pathfinder series too
lvoonjian8888 said:
Maybe they will release it later on because S9 & S9+ got the Pathfinder series too
Click to expand...
Click to collapse
Sure hope this series lives on. It just looks so cool not to mention damn new pristine even after a year.
Here in India the Pathfinder never made it for the S9 hence I assumed it's gone for good. Not a fan of the plasma or the new plyo. The monarch not only is expensive but looks hefty.
I ordered the Monarch today.
Got the red monarch today from best buy. Now just need the Note.
Sent from my SM-N950U using Tapatalk
drmacrofish said:
Got the red monarch today from best buy. Now just need the Note.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
jbanks9251 said:
I ordered the Monarch today.
Click to expand...
Click to collapse
Let me know how was the weight for the Monarch case. Scare it will make the Note 9 heavier.
Got in the black Monarch today.
lvoonjian8888 said:
Let me know how was the weight for the Monarch case. Scare it will make the Note 9 heavier.
Click to expand...
Click to collapse
Case should be here tomorrow, but the phone won't be.
jbanks9251 said:
Case should be here tomorrow, but the phone won't be.
Click to expand...
Click to collapse
My monarch case came early, so but I had the phone without the case for about 4 hours. Feels similar in weight to the plasma case, maybe a tad bit heavier. Doesn't really add a noticeable additional weight but the grips are nice.
sinofmercy said:
My monarch case came early, so but I had the phone without the case for about 4 hours. Feels similar in weight to the plasma case, maybe a tad bit heavier. Doesn't really add a noticeable additional weight but the grips are nice.
Click to expand...
Click to collapse
Great to hear that! Do you mind to share some photos?
Guys, check it out my final review for UAG Plasma Ash case. Just got my Black Note 9 yesterday.